kernel-fxtec-pro1x/drivers/input/serio/i8042.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

1116 lines
26 KiB
C

/*
* i8042 keyboard and mouse controller driver for Linux
*
* Copyright (c) 1999-2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/err.h>
#include <linux/rcupdate.h>
#include <asm/io.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
MODULE_LICENSE("GPL");
static unsigned int i8042_noaux;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
static unsigned int i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
static unsigned int i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
static unsigned int i8042_reset;
module_param_named(reset, i8042_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
static unsigned int i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
static unsigned int i8042_dumbkbd;
module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
static unsigned int i8042_noloop;
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
static unsigned int i8042_blink_frequency = 500;
module_param_named(panicblink, i8042_blink_frequency, uint, 0600);
MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics");
#ifdef CONFIG_PNP
static int i8042_nopnp;
module_param_named(nopnp, i8042_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
#endif
#define DEBUG
#ifdef DEBUG
static int i8042_debug;
module_param_named(debug, i8042_debug, bool, 0600);
MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
#endif
__obsolete_setup("i8042_noaux");
__obsolete_setup("i8042_nomux");
__obsolete_setup("i8042_unlock");
__obsolete_setup("i8042_reset");
__obsolete_setup("i8042_direct");
__obsolete_setup("i8042_dumbkbd");
#include "i8042.h"
static DEFINE_SPINLOCK(i8042_lock);
struct i8042_port {
struct serio *serio;
int irq;
unsigned char disable;
unsigned char irqen;
unsigned char exists;
signed char mux;
char name[8];
};
#define I8042_KBD_PORT_NO 0
#define I8042_AUX_PORT_NO 1
#define I8042_MUX_PORT_NO 2
#define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2)
static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
{
.disable = I8042_CTR_KBDDIS,
.irqen = I8042_CTR_KBDINT,
.mux = -1,
.name = "KBD",
},
{
.disable = I8042_CTR_AUXDIS,
.irqen = I8042_CTR_AUXINT,
.mux = -1,
.name = "AUX",
}
};
static unsigned char i8042_initial_ctr;
static unsigned char i8042_ctr;
static unsigned char i8042_mux_open;
static unsigned char i8042_mux_present;
static struct timer_list i8042_timer;
static struct platform_device *i8042_platform_device;
/*
* Shared IRQ's require a device pointer, but this driver doesn't support
* multiple devices
*/
#define i8042_request_irq_cookie (&i8042_timer)
static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
* be ready for reading values from it / writing values to it.
* Called always with i8042_lock held.
*/
static int i8042_wait_read(void)
{
int i = 0;
while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
udelay(50);
i++;
}
return -(i == I8042_CTL_TIMEOUT);
}
static int i8042_wait_write(void)
{
int i = 0;
while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
udelay(50);
i++;
}
return -(i == I8042_CTL_TIMEOUT);
}
/*
* i8042_flush() flushes all data that may be in the keyboard and mouse buffers
* of the i8042 down the toilet.
*/
static int i8042_flush(void)
{
unsigned long flags;
unsigned char data, str;
int i = 0;
spin_lock_irqsave(&i8042_lock, flags);
while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) {
udelay(50);
data = i8042_read_data();
i++;
dbg("%02x <- i8042 (flush, %s)", data,
str & I8042_STR_AUXDATA ? "aux" : "kbd");
}
spin_unlock_irqrestore(&i8042_lock, flags);
return i;
}
/*
* i8042_command() executes a command on the i8042. It also sends the input
* parameter(s) of the commands to it, and receives the output value(s). The
* parameters are to be stored in the param array, and the output is placed
* into the same array. The number of the parameters and output values is
* encoded in bits 8-11 of the command number.
*/
static int i8042_command(unsigned char *param, int command)
{
unsigned long flags;
int retval = 0, i = 0;
if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
return -1;
spin_lock_irqsave(&i8042_lock, flags);
retval = i8042_wait_write();
if (!retval) {
dbg("%02x -> i8042 (command)", command & 0xff);
i8042_write_command(command & 0xff);
}
if (!retval)
for (i = 0; i < ((command >> 12) & 0xf); i++) {
if ((retval = i8042_wait_write())) break;
dbg("%02x -> i8042 (parameter)", param[i]);
i8042_write_data(param[i]);
}
if (!retval)
for (i = 0; i < ((command >> 8) & 0xf); i++) {
if ((retval = i8042_wait_read())) break;
if (i8042_read_status() & I8042_STR_AUXDATA)
param[i] = ~i8042_read_data();
else
param[i] = i8042_read_data();
dbg("%02x <- i8042 (return)", param[i]);
}
spin_unlock_irqrestore(&i8042_lock, flags);
if (retval)
dbg(" -- i8042 (timeout)");
return retval;
}
/*
* i8042_kbd_write() sends a byte out through the keyboard interface.
*/
static int i8042_kbd_write(struct serio *port, unsigned char c)
{
unsigned long flags;
int retval = 0;
spin_lock_irqsave(&i8042_lock, flags);
if(!(retval = i8042_wait_write())) {
dbg("%02x -> i8042 (kbd-data)", c);
i8042_write_data(c);
}
spin_unlock_irqrestore(&i8042_lock, flags);
return retval;
}
/*
* i8042_aux_write() sends a byte out through the aux interface.
*/
static int i8042_aux_write(struct serio *serio, unsigned char c)
{
struct i8042_port *port = serio->port_data;
int retval;
/*
* Send the byte out.
*/
if (port->mux == -1)
retval = i8042_command(&c, I8042_CMD_AUX_SEND);
else
retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);
/*
* Make sure the interrupt happens and the character is received even
* in the case the IRQ isn't wired, so that we can receive further
* characters later.
*/
i8042_interrupt(0, NULL, NULL);
return retval;
}
/*
* i8042_activate_port() enables port on a chip.
*/
static int i8042_activate_port(struct i8042_port *port)
{
if (!port->serio)
return -1;
i8042_flush();
/*
* Enable port again here because it is disabled if we are
* resuming (normally it is enabled already).
*/
i8042_ctr &= ~port->disable;
i8042_ctr |= port->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
i8042_ctr &= ~port->irqen;
return -1;
}
return 0;
}
/*
* i8042_open() is called when a port is open by the higher layer.
* It allocates the interrupt and calls i8042_enable_port.
*/
static int i8042_open(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
if (port->mux != -1)
if (i8042_mux_open++)
return 0;
if (request_irq(port->irq, i8042_interrupt,
SA_SHIRQ, "i8042", i8042_request_irq_cookie)) {
printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name);
goto irq_fail;
}
if (i8042_activate_port(port)) {
printk(KERN_ERR "i8042.c: Can't activate %s, unregistering the port\n", port->name);
goto activate_fail;
}
i8042_interrupt(0, NULL, NULL);
return 0;
activate_fail:
free_irq(port->irq, i8042_request_irq_cookie);
irq_fail:
serio_unregister_port_delayed(serio);
return -1;
}
/*
* i8042_close() frees the interrupt, so that it can possibly be used
* by another driver. We never know - if the user doesn't have a mouse,
* the BIOS could have used the AUX interrupt for PCI.
*/
static void i8042_close(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
if (port->mux != -1)
if (--i8042_mux_open)
return;
i8042_ctr &= ~port->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while closing %s.\n", port->name);
/*
* We still want to continue and free IRQ so if more data keeps coming in
* kernel will just ignore the irq.
*/
}
free_irq(port->irq, i8042_request_irq_cookie);
i8042_flush();
}
/*
* i8042_start() is called by serio core when port is about to finish
* registering. It will mark port as existing so i8042_interrupt can
* start sending data through it.
*/
static int i8042_start(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 1;
mb();
return 0;
}
/*
* i8042_stop() marks serio port as non-existing so i8042_interrupt
* will not try to send data to the port that is about to go away.
* The function is called by serio core as part of unregister procedure.
*/
static void i8042_stop(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 0;
synchronize_kernel();
port->serio = NULL;
}
/*
* i8042_interrupt() is the most important function in this driver -
* it handles the interrupts from the i8042, and sends incoming bytes
* to the upper layers.
*/
static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct i8042_port *port;
unsigned long flags;
unsigned char str, data;
unsigned int dfl;
unsigned int port_no;
int ret;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
spin_lock_irqsave(&i8042_lock, flags);
str = i8042_read_status();
if (unlikely(~str & I8042_STR_OBF)) {
spin_unlock_irqrestore(&i8042_lock, flags);
if (irq) dbg("Interrupt %d, without any data", irq);
ret = 0;
goto out;
}
data = i8042_read_data();
spin_unlock_irqrestore(&i8042_lock, flags);
if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
static unsigned long last_transmit;
static unsigned char last_str;
dfl = 0;
if (str & I8042_STR_MUXERR) {
dbg("MUX error, status is %02x, data is %02x", str, data);
switch (data) {
default:
/*
* When MUXERR condition is signalled the data register can only contain
* 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
* it is not always the case. Some KBC just get confused which port the
* data came from and signal error leaving the data intact. They _do not_
* revert to legacy mode (actually I've never seen KBC reverting to legacy
* mode yet, when we see one we'll add proper handling).
* Anyway, we will assume that the data came from the same serio last byte
* was transmitted (if transmission happened not too long ago).
*/
if (time_before(jiffies, last_transmit + HZ/10)) {
str = last_str;
break;
}
/* fall through - report timeout */
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
case 0xff: dfl = SERIO_PARITY; data = 0xfe; break;
}
}
port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3);
last_str = str;
last_transmit = jiffies;
} else {
dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
port_no = (str & I8042_STR_AUXDATA) ?
I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;
}
port = &i8042_ports[port_no];
dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
data, port->name, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
if (likely(port->exists))
serio_interrupt(port->serio, data, dfl, regs);
ret = 1;
out:
return IRQ_RETVAL(ret);
}
/*
* i8042_set_mux_mode checks whether the controller has an active
* multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
*/
static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
{
unsigned char param;
/*
* Get rid of bytes in the queue.
*/
i8042_flush();
/*
* Internal loopback test - send three bytes, they should come back from the
* mouse interface, the last should be version. Note that we negate mouseport
* command responses for the i8042_check_aux() routine.
*/
param = 0xf0;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
return -1;
param = mode ? 0x56 : 0xf6;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0xa9 : 0x09))
return -1;
param = mode ? 0xa4 : 0xa5;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a))
return -1;
if (mux_version)
*mux_version = ~param;
return 0;
}
/*
* i8042_enable_mux_ports enables 4 individual AUX ports after
* the controller has been switched into Multiplexed mode
*/
static int i8042_enable_mux_ports(void)
{
unsigned char param;
int i;
/*
* Disable all muxed ports by disabling AUX.
*/
i8042_ctr |= I8042_CTR_AUXDIS;
i8042_ctr &= ~I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
return -1;
}
/*
* Enable all muxed ports.
*/
for (i = 0; i < 4; i++) {
i8042_command(&param, I8042_CMD_MUX_PFX + i);
i8042_command(&param, I8042_CMD_AUX_ENABLE);
}
return 0;
}
/*
* i8042_check_mux() checks whether the controller supports the PS/2 Active
* Multiplexing specification by Synaptics, Phoenix, Insyde and
* LCS/Telegraphics.
*/
static int __init i8042_check_mux(void)
{
unsigned char mux_version;
if (i8042_set_mux_mode(1, &mux_version))
return -1;
/* Workaround for interference with USB Legacy emulation */
/* that causes a v10.12 MUX to be found. */
if (mux_version == 0xAC)
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
(mux_version >> 4) & 0xf, mux_version & 0xf);
if (i8042_enable_mux_ports())
return -1;
i8042_mux_present = 1;
return 0;
}
/*
* i8042_check_aux() applies as much paranoia as it can at detecting
* the presence of an AUX interface.
*/
static int __init i8042_check_aux(void)
{
unsigned char param;
static int i8042_check_aux_cookie;
/*
* Check if AUX irq is available. If it isn't, then there is no point
* in trying to detect AUX presence.
*/
if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt,
SA_SHIRQ, "i8042", &i8042_check_aux_cookie))
return -1;
free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie);
/*
* Get rid of bytes in the queue.
*/
i8042_flush();
/*
* Internal loopback test - filters out AT-type i8042's. Unfortunately
* SiS screwed up and their 5597 doesn't support the LOOP command even
* though it has an AUX port.
*/
param = 0x5a;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5) {
/*
* External connection test - filters out AT-soldered PS/2 i8042's
* 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error
* 0xfa - no error on some notebooks which ignore the spec
* Because it's common for chipsets to return error on perfectly functioning
* AUX ports, we test for this only when the LOOP command failed.
*/
if (i8042_command(&param, I8042_CMD_AUX_TEST)
|| (param && param != 0xfa && param != 0xff))
return -1;
}
/*
* Bit assignment test - filters out PS/2 i8042's in AT mode
*/
if (i8042_command(&param, I8042_CMD_AUX_DISABLE))
return -1;
if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) {
printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
}
if (i8042_command(&param, I8042_CMD_AUX_ENABLE))
return -1;
if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS))
return -1;
/*
* Disable the interface.
*/
i8042_ctr |= I8042_CTR_AUXDIS;
i8042_ctr &= ~I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
return -1;
return 0;
}
/*
* i8042_port_register() marks the device as existing,
* registers it, and reports to the user.
*/
static int __init i8042_port_register(struct i8042_port *port)
{
i8042_ctr &= ~port->disable;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
kfree(port->serio);
port->serio = NULL;
i8042_ctr |= port->disable;
return -1;
}
printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
port->name,
(unsigned long) I8042_DATA_REG,
(unsigned long) I8042_COMMAND_REG,
port->irq);
serio_register_port(port->serio);
return 0;
}
static void i8042_timer_func(unsigned long data)
{
i8042_interrupt(0, NULL, NULL);
}
/*
* i8042_controller init initializes the i8042 controller, and,
* most importantly, sets it into non-xlated mode if that's
* desired.
*/
static int i8042_controller_init(void)
{
unsigned long flags;
/*
* Test the i8042. We need to know if it thinks it's working correctly
* before doing anything else.
*/
if (i8042_flush() == I8042_BUFFER_SIZE) {
printk(KERN_ERR "i8042.c: No controller found.\n");
return -1;
}
if (i8042_reset) {
unsigned char param;
if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
return -1;
}
if (param != I8042_RET_CTL_TEST) {
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
param, I8042_RET_CTL_TEST);
return -1;
}
}
/*
* Save the CTR for restoral on unload / reboot.
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
return -1;
}
i8042_initial_ctr = i8042_ctr;
/*
* Disable the keyboard interface and interrupt.
*/
i8042_ctr |= I8042_CTR_KBDDIS;
i8042_ctr &= ~I8042_CTR_KBDINT;
/*
* Handle keylock.
*/
spin_lock_irqsave(&i8042_lock, flags);
if (~i8042_read_status() & I8042_STR_KEYLOCK) {
if (i8042_unlock)
i8042_ctr |= I8042_CTR_IGNKEYLOCK;
else
printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
}
spin_unlock_irqrestore(&i8042_lock, flags);
/*
* If the chip is configured into nontranslated mode by the BIOS, don't
* bother enabling translating and be happy.
*/
if (~i8042_ctr & I8042_CTR_XLATE)
i8042_direct = 1;
/*
* Set nontranslated mode for the kbd interface if requested by an option.
* After this the kbd interface becomes a simple serial in/out, like the aux
* interface is. We don't do this by default, since it can confuse notebook
* BIOSes.
*/
if (i8042_direct)
i8042_ctr &= ~I8042_CTR_XLATE;
/*
* Write CTR back.
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
return -1;
}
return 0;
}
/*
* Reset the controller.
*/
static void i8042_controller_reset(void)
{
unsigned char param;
/*
* Reset the controller if requested.
*/
if (i8042_reset)
if (i8042_command(&param, I8042_CMD_CTL_TEST))
printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
/*
* Disable MUX mode if present.
*/
if (i8042_mux_present)
i8042_set_mux_mode(0, NULL);
/*
* Restore the original control register setting.
*/
i8042_ctr = i8042_initial_ctr;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
}
/*
* Here we try to reset everything back to a state in which the BIOS will be
* able to talk to the hardware when rebooting.
*/
static void i8042_controller_cleanup(void)
{
int i;
i8042_flush();
/*
* Reset anything that is connected to the ports.
*/
for (i = 0; i < I8042_NUM_PORTS; i++)
if (i8042_ports[i].exists)
serio_cleanup(i8042_ports[i].serio);
i8042_controller_reset();
}
/*
* i8042_panic_blink() will flash the keyboard LEDs and is called when
* kernel panics. Flashing LEDs is useful for users running X who may
* not see the console and will help distingushing panics from "real"
* lockups.
*
* Note that DELAY has a limit of 10ms so we will not get stuck here
* waiting for KBC to free up even if KBD interrupt is off
*/
#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0)
static long i8042_panic_blink(long count)
{
long delay = 0;
static long last_blink;
static char led;
/*
* We expect frequency to be about 1/2s. KDB uses about 1s.
* Make sure they are different.
*/
if (!i8042_blink_frequency)
return 0;
if (count - last_blink < i8042_blink_frequency)
return 0;
led ^= 0x01 | 0x04;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
i8042_write_data(0xed); /* set leds */
DELAY;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
DELAY;
i8042_write_data(led);
DELAY;
last_blink = count;
return delay;
}
#undef DELAY
/*
* Here we try to restore the original BIOS settings
*/
static int i8042_suspend(struct device *dev, pm_message_t state, u32 level)
{
if (level == SUSPEND_DISABLE) {
del_timer_sync(&i8042_timer);
i8042_controller_reset();
}
return 0;
}
/*
* Here we try to reset everything back to a state in which suspended
*/
static int i8042_resume(struct device *dev, u32 level)
{
int i;
if (level != RESUME_ENABLE)
return 0;
if (i8042_controller_init()) {
printk(KERN_ERR "i8042: resume failed\n");
return -1;
}
if (i8042_mux_present)
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n");
/*
* Activate all ports.
*/
for (i = 0; i < I8042_NUM_PORTS; i++)
i8042_activate_port(&i8042_ports[i]);
/*
* Restart timer (for polling "stuck" data)
*/
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
panic_blink = i8042_panic_blink;
return 0;
}
/*
* We need to reset the 8042 back to original mode on system shutdown,
* because otherwise BIOSes will be confused.
*/
static void i8042_shutdown(struct device *dev)
{
i8042_controller_cleanup();
}
static struct device_driver i8042_driver = {
.name = "i8042",
.bus = &platform_bus_type,
.suspend = i8042_suspend,
.resume = i8042_resume,
.shutdown = i8042_shutdown,
};
static void __init i8042_create_kbd_port(void)
{
struct serio *serio;
struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
if (serio) {
memset(serio, 0, sizeof(struct serio));
serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL;
serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write;
serio->open = i8042_open;
serio->close = i8042_close;
serio->start = i8042_start;
serio->stop = i8042_stop;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
strlcpy(serio->name, "i8042 Kbd Port", sizeof(serio->name));
strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
port->serio = serio;
i8042_port_register(port);
}
}
static void __init i8042_create_aux_port(void)
{
struct serio *serio;
struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO];
serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
if (serio) {
memset(serio, 0, sizeof(struct serio));
serio->id.type = SERIO_8042;
serio->write = i8042_aux_write;
serio->open = i8042_open;
serio->close = i8042_close;
serio->start = i8042_start;
serio->stop = i8042_stop;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
strlcpy(serio->name, "i8042 Aux Port", sizeof(serio->name));
strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
port->serio = serio;
i8042_port_register(port);
}
}
static void __init i8042_create_mux_port(int index)
{
struct serio *serio;
struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index];
serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
if (serio) {
memset(serio, 0, sizeof(struct serio));
serio->id.type = SERIO_8042;
serio->write = i8042_aux_write;
serio->open = i8042_open;
serio->close = i8042_close;
serio->start = i8042_start;
serio->stop = i8042_stop;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
snprintf(serio->name, sizeof(serio->name), "i8042 Aux-%d Port", index);
snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, index + 1);
*port = i8042_ports[I8042_AUX_PORT_NO];
port->exists = 0;
snprintf(port->name, sizeof(port->name), "AUX%d", index);
port->mux = index;
port->serio = serio;
i8042_port_register(port);
}
}
static int __init i8042_init(void)
{
int i;
int err;
dbg_init();
init_timer(&i8042_timer);
i8042_timer.function = i8042_timer_func;
if (i8042_platform_init())
return -EBUSY;
i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
if (i8042_controller_init()) {
i8042_platform_exit();
return -ENODEV;
}
err = driver_register(&i8042_driver);
if (err) {
i8042_platform_exit();
return err;
}
i8042_platform_device = platform_device_register_simple("i8042", -1, NULL, 0);
if (IS_ERR(i8042_platform_device)) {
driver_unregister(&i8042_driver);
i8042_platform_exit();
return PTR_ERR(i8042_platform_device);
}
if (!i8042_noaux && !i8042_check_aux()) {
if (!i8042_nomux && !i8042_check_mux())
for (i = 0; i < I8042_NUM_MUX_PORTS; i++)
i8042_create_mux_port(i);
else
i8042_create_aux_port();
}
i8042_create_kbd_port();
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
return 0;
}
static void __exit i8042_exit(void)
{
int i;
i8042_controller_cleanup();
for (i = 0; i < I8042_NUM_PORTS; i++)
if (i8042_ports[i].exists)
serio_unregister_port(i8042_ports[i].serio);
del_timer_sync(&i8042_timer);
platform_device_unregister(i8042_platform_device);
driver_unregister(&i8042_driver);
i8042_platform_exit();
panic_blink = NULL;
}
module_init(i8042_init);
module_exit(i8042_exit);