52e405eaa9
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
285 lines
7.3 KiB
C
285 lines
7.3 KiB
C
/*
|
|
* linux/arch/arm/mach-omap/omap2/board-apollon.c
|
|
*
|
|
* Copyright (C) 2005,2006 Samsung Electronics
|
|
* Author: Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* Modified from mach-omap/omap2/board-h4.c
|
|
*
|
|
* Code for apollon OMAP2 board. Should work on many OMAP2 systems where
|
|
* the bootloader passes the board-specific data to the kernel.
|
|
* Do not put any board specific code to this file; create a new machine
|
|
* type if you need custom low-level initializations.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/onenand.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/usb.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/common.h>
|
|
#include "prcm-regs.h"
|
|
|
|
/* LED & Switch macros */
|
|
#define LED0_GPIO13 13
|
|
#define LED1_GPIO14 14
|
|
#define LED2_GPIO15 15
|
|
#define SW_ENTER_GPIO16 16
|
|
#define SW_UP_GPIO17 17
|
|
#define SW_DOWN_GPIO58 58
|
|
|
|
static struct mtd_partition apollon_partitions[] = {
|
|
{
|
|
.name = "X-Loader + U-Boot",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_16M,
|
|
},
|
|
{
|
|
.name = "filesystem00",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_32M,
|
|
},
|
|
{
|
|
.name = "filesystem01",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data apollon_flash_data = {
|
|
.parts = apollon_partitions,
|
|
.nr_parts = ARRAY_SIZE(apollon_partitions),
|
|
};
|
|
|
|
static struct resource apollon_flash_resource = {
|
|
.start = APOLLON_CS0_BASE,
|
|
.end = APOLLON_CS0_BASE + SZ_128K,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device apollon_onenand_device = {
|
|
.name = "onenand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &apollon_flash_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(&apollon_flash_resource),
|
|
.resource = &apollon_flash_resource,
|
|
};
|
|
|
|
static struct resource apollon_smc91x_resources[] = {
|
|
[0] = {
|
|
.start = APOLLON_ETHR_START, /* Physical */
|
|
.end = APOLLON_ETHR_START + 0xf,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
|
|
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device apollon_smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(apollon_smc91x_resources),
|
|
.resource = apollon_smc91x_resources,
|
|
};
|
|
|
|
static struct platform_device apollon_lcd_device = {
|
|
.name = "apollon_lcd",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *apollon_devices[] __initdata = {
|
|
&apollon_onenand_device,
|
|
&apollon_smc91x_device,
|
|
&apollon_lcd_device,
|
|
};
|
|
|
|
static inline void __init apollon_init_smc91x(void)
|
|
{
|
|
/* Make sure CS1 timings are correct */
|
|
GPMC_CONFIG1_1 = 0x00011203;
|
|
GPMC_CONFIG2_1 = 0x001f1f01;
|
|
GPMC_CONFIG3_1 = 0x00080803;
|
|
GPMC_CONFIG4_1 = 0x1c091c09;
|
|
GPMC_CONFIG5_1 = 0x041f1f1f;
|
|
GPMC_CONFIG6_1 = 0x000004c4;
|
|
GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24);
|
|
udelay(100);
|
|
|
|
omap_cfg_reg(W4__24XX_GPIO74);
|
|
if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
|
|
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
|
|
APOLLON_ETHR_GPIO_IRQ);
|
|
return;
|
|
}
|
|
omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
|
|
}
|
|
|
|
static void __init omap_apollon_init_irq(void)
|
|
{
|
|
omap2_init_common_hw();
|
|
omap_init_irq();
|
|
omap_gpio_init();
|
|
apollon_init_smc91x();
|
|
}
|
|
|
|
static struct omap_uart_config apollon_uart_config __initdata = {
|
|
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
|
|
};
|
|
|
|
static struct omap_mmc_config apollon_mmc_config __initdata = {
|
|
.mmc [0] = {
|
|
.enabled = 0,
|
|
.wire4 = 0,
|
|
.wp_pin = -1,
|
|
.power_pin = -1,
|
|
.switch_pin = -1,
|
|
},
|
|
};
|
|
|
|
static struct omap_lcd_config apollon_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_board_config_kernel apollon_config[] = {
|
|
{ OMAP_TAG_UART, &apollon_uart_config },
|
|
{ OMAP_TAG_MMC, &apollon_mmc_config },
|
|
{ OMAP_TAG_LCD, &apollon_lcd_config },
|
|
};
|
|
|
|
static void __init apollon_led_init(void)
|
|
{
|
|
/* LED0 - AA10 */
|
|
omap_cfg_reg(AA10_242X_GPIO13);
|
|
omap_request_gpio(LED0_GPIO13);
|
|
omap_set_gpio_direction(LED0_GPIO13, 0);
|
|
omap_set_gpio_dataout(LED0_GPIO13, 0);
|
|
/* LED1 - AA6 */
|
|
omap_cfg_reg(AA6_242X_GPIO14);
|
|
omap_request_gpio(LED1_GPIO14);
|
|
omap_set_gpio_direction(LED1_GPIO14, 0);
|
|
omap_set_gpio_dataout(LED1_GPIO14, 0);
|
|
/* LED2 - AA4 */
|
|
omap_cfg_reg(AA4_242X_GPIO15);
|
|
omap_request_gpio(LED2_GPIO15);
|
|
omap_set_gpio_direction(LED2_GPIO15, 0);
|
|
omap_set_gpio_dataout(LED2_GPIO15, 0);
|
|
}
|
|
|
|
static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs)
|
|
{
|
|
static unsigned int led0, led1, led2;
|
|
|
|
if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
|
|
omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
|
|
else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
|
|
omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
|
|
else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
|
|
omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void __init apollon_sw_init(void)
|
|
{
|
|
/* Enter SW - Y11 */
|
|
omap_cfg_reg(Y11_242X_GPIO16);
|
|
omap_request_gpio(SW_ENTER_GPIO16);
|
|
omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
|
|
/* Up SW - AA12 */
|
|
omap_cfg_reg(AA12_242X_GPIO17);
|
|
omap_request_gpio(SW_UP_GPIO17);
|
|
omap_set_gpio_direction(SW_UP_GPIO17, 1);
|
|
/* Down SW - AA8 */
|
|
omap_cfg_reg(AA8_242X_GPIO58);
|
|
omap_request_gpio(SW_DOWN_GPIO58);
|
|
omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
|
|
|
|
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
|
|
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
|
|
IRQF_SHARED, "enter sw",
|
|
&apollon_sw_interrupt))
|
|
return;
|
|
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
|
|
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
|
|
IRQF_SHARED, "up sw",
|
|
&apollon_sw_interrupt))
|
|
return;
|
|
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
|
|
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
|
|
IRQF_SHARED, "down sw",
|
|
&apollon_sw_interrupt))
|
|
return;
|
|
}
|
|
|
|
static void __init omap_apollon_init(void)
|
|
{
|
|
apollon_led_init();
|
|
apollon_sw_init();
|
|
|
|
/* REVISIT: where's the correct place */
|
|
omap_cfg_reg(W19_24XX_SYS_NIRQ);
|
|
|
|
/*
|
|
* Make sure the serial ports are muxed on at this point.
|
|
* You have to mux them off in device drivers later on
|
|
* if not needed.
|
|
*/
|
|
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
|
|
omap_board_config = apollon_config;
|
|
omap_board_config_size = ARRAY_SIZE(apollon_config);
|
|
omap_serial_init();
|
|
}
|
|
|
|
static void __init omap_apollon_map_io(void)
|
|
{
|
|
omap2_map_common_io();
|
|
}
|
|
|
|
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
|
|
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
|
|
.phys_io = 0x48000000,
|
|
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
|
.boot_params = 0x80000100,
|
|
.map_io = omap_apollon_map_io,
|
|
.init_irq = omap_apollon_init_irq,
|
|
.init_machine = omap_apollon_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|