1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
513 lines
16 KiB
C
513 lines
16 KiB
C
/*
|
|
* ipmi_bt_sm.c
|
|
*
|
|
* The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
|
|
* of the driver architecture at http://sourceforge.net/project/openipmi
|
|
*
|
|
* Author: Rocky Craig <first.last@hp.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
|
#include <linux/kernel.h> /* For printk. */
|
|
#include <linux/string.h>
|
|
#include <linux/ipmi_msgdefs.h> /* for completion codes */
|
|
#include "ipmi_si_sm.h"
|
|
|
|
#define IPMI_BT_VERSION "v33"
|
|
|
|
static int bt_debug = 0x00; /* Production value 0, see following flags */
|
|
|
|
#define BT_DEBUG_ENABLE 1
|
|
#define BT_DEBUG_MSG 2
|
|
#define BT_DEBUG_STATES 4
|
|
|
|
/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
|
|
and 64 byte buffers. However, one HP implementation wants 255 bytes of
|
|
buffer (with a documented message of 160 bytes) so go for the max.
|
|
Since the Open IPMI architecture is single-message oriented at this
|
|
stage, the queue depth of BT is of no concern. */
|
|
|
|
#define BT_NORMAL_TIMEOUT 2000000 /* seconds in microseconds */
|
|
#define BT_RETRY_LIMIT 2
|
|
#define BT_RESET_DELAY 6000000 /* 6 seconds after warm reset */
|
|
|
|
enum bt_states {
|
|
BT_STATE_IDLE,
|
|
BT_STATE_XACTION_START,
|
|
BT_STATE_WRITE_BYTES,
|
|
BT_STATE_WRITE_END,
|
|
BT_STATE_WRITE_CONSUME,
|
|
BT_STATE_B2H_WAIT,
|
|
BT_STATE_READ_END,
|
|
BT_STATE_RESET1, /* These must come last */
|
|
BT_STATE_RESET2,
|
|
BT_STATE_RESET3,
|
|
BT_STATE_RESTART,
|
|
BT_STATE_HOSED
|
|
};
|
|
|
|
struct si_sm_data {
|
|
enum bt_states state;
|
|
enum bt_states last_state; /* assist printing and resets */
|
|
unsigned char seq; /* BT sequence number */
|
|
struct si_sm_io *io;
|
|
unsigned char write_data[IPMI_MAX_MSG_LENGTH];
|
|
int write_count;
|
|
unsigned char read_data[IPMI_MAX_MSG_LENGTH];
|
|
int read_count;
|
|
int truncated;
|
|
long timeout;
|
|
unsigned int error_retries; /* end of "common" fields */
|
|
int nonzero_status; /* hung BMCs stay all 0 */
|
|
};
|
|
|
|
#define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */
|
|
#define BT_CLR_RD_PTR 0x02
|
|
#define BT_H2B_ATN 0x04
|
|
#define BT_B2H_ATN 0x08
|
|
#define BT_SMS_ATN 0x10
|
|
#define BT_OEM0 0x20
|
|
#define BT_H_BUSY 0x40
|
|
#define BT_B_BUSY 0x80
|
|
|
|
/* Some bits are toggled on each write: write once to set it, once
|
|
more to clear it; writing a zero does nothing. To absolutely
|
|
clear it, check its state and write if set. This avoids the "get
|
|
current then use as mask" scheme to modify one bit. Note that the
|
|
variable "bt" is hardcoded into these macros. */
|
|
|
|
#define BT_STATUS bt->io->inputb(bt->io, 0)
|
|
#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x)
|
|
|
|
#define BMC2HOST bt->io->inputb(bt->io, 1)
|
|
#define HOST2BMC(x) bt->io->outputb(bt->io, 1, x)
|
|
|
|
#define BT_INTMASK_R bt->io->inputb(bt->io, 2)
|
|
#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x)
|
|
|
|
/* Convenience routines for debugging. These are not multi-open safe!
|
|
Note the macros have hardcoded variables in them. */
|
|
|
|
static char *state2txt(unsigned char state)
|
|
{
|
|
switch (state) {
|
|
case BT_STATE_IDLE: return("IDLE");
|
|
case BT_STATE_XACTION_START: return("XACTION");
|
|
case BT_STATE_WRITE_BYTES: return("WR_BYTES");
|
|
case BT_STATE_WRITE_END: return("WR_END");
|
|
case BT_STATE_WRITE_CONSUME: return("WR_CONSUME");
|
|
case BT_STATE_B2H_WAIT: return("B2H_WAIT");
|
|
case BT_STATE_READ_END: return("RD_END");
|
|
case BT_STATE_RESET1: return("RESET1");
|
|
case BT_STATE_RESET2: return("RESET2");
|
|
case BT_STATE_RESET3: return("RESET3");
|
|
case BT_STATE_RESTART: return("RESTART");
|
|
case BT_STATE_HOSED: return("HOSED");
|
|
}
|
|
return("BAD STATE");
|
|
}
|
|
#define STATE2TXT state2txt(bt->state)
|
|
|
|
static char *status2txt(unsigned char status, char *buf)
|
|
{
|
|
strcpy(buf, "[ ");
|
|
if (status & BT_B_BUSY) strcat(buf, "B_BUSY ");
|
|
if (status & BT_H_BUSY) strcat(buf, "H_BUSY ");
|
|
if (status & BT_OEM0) strcat(buf, "OEM0 ");
|
|
if (status & BT_SMS_ATN) strcat(buf, "SMS ");
|
|
if (status & BT_B2H_ATN) strcat(buf, "B2H ");
|
|
if (status & BT_H2B_ATN) strcat(buf, "H2B ");
|
|
strcat(buf, "]");
|
|
return buf;
|
|
}
|
|
#define STATUS2TXT(buf) status2txt(status, buf)
|
|
|
|
/* This will be called from within this module on a hosed condition */
|
|
#define FIRST_SEQ 0
|
|
static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
|
|
{
|
|
bt->state = BT_STATE_IDLE;
|
|
bt->last_state = BT_STATE_IDLE;
|
|
bt->seq = FIRST_SEQ;
|
|
bt->io = io;
|
|
bt->write_count = 0;
|
|
bt->read_count = 0;
|
|
bt->error_retries = 0;
|
|
bt->nonzero_status = 0;
|
|
bt->truncated = 0;
|
|
bt->timeout = BT_NORMAL_TIMEOUT;
|
|
return 3; /* We claim 3 bytes of space; ought to check SPMI table */
|
|
}
|
|
|
|
static int bt_start_transaction(struct si_sm_data *bt,
|
|
unsigned char *data,
|
|
unsigned int size)
|
|
{
|
|
unsigned int i;
|
|
|
|
if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH)) return -1;
|
|
|
|
if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED))
|
|
return -2;
|
|
|
|
if (bt_debug & BT_DEBUG_MSG) {
|
|
printk(KERN_WARNING "+++++++++++++++++++++++++++++++++++++\n");
|
|
printk(KERN_WARNING "BT: write seq=0x%02X:", bt->seq);
|
|
for (i = 0; i < size; i ++) printk (" %02x", data[i]);
|
|
printk("\n");
|
|
}
|
|
bt->write_data[0] = size + 1; /* all data plus seq byte */
|
|
bt->write_data[1] = *data; /* NetFn/LUN */
|
|
bt->write_data[2] = bt->seq;
|
|
memcpy(bt->write_data + 3, data + 1, size - 1);
|
|
bt->write_count = size + 2;
|
|
|
|
bt->error_retries = 0;
|
|
bt->nonzero_status = 0;
|
|
bt->read_count = 0;
|
|
bt->truncated = 0;
|
|
bt->state = BT_STATE_XACTION_START;
|
|
bt->last_state = BT_STATE_IDLE;
|
|
bt->timeout = BT_NORMAL_TIMEOUT;
|
|
return 0;
|
|
}
|
|
|
|
/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
|
|
it calls this. Strip out the length and seq bytes. */
|
|
|
|
static int bt_get_result(struct si_sm_data *bt,
|
|
unsigned char *data,
|
|
unsigned int length)
|
|
{
|
|
int i, msg_len;
|
|
|
|
msg_len = bt->read_count - 2; /* account for length & seq */
|
|
/* Always NetFn, Cmd, cCode */
|
|
if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) {
|
|
printk(KERN_WARNING "BT results: bad msg_len = %d\n", msg_len);
|
|
data[0] = bt->write_data[1] | 0x4; /* Kludge a response */
|
|
data[1] = bt->write_data[3];
|
|
data[2] = IPMI_ERR_UNSPECIFIED;
|
|
msg_len = 3;
|
|
} else {
|
|
data[0] = bt->read_data[1];
|
|
data[1] = bt->read_data[3];
|
|
if (length < msg_len) bt->truncated = 1;
|
|
if (bt->truncated) { /* can be set in read_all_bytes() */
|
|
data[2] = IPMI_ERR_MSG_TRUNCATED;
|
|
msg_len = 3;
|
|
} else memcpy(data + 2, bt->read_data + 4, msg_len - 2);
|
|
|
|
if (bt_debug & BT_DEBUG_MSG) {
|
|
printk (KERN_WARNING "BT: res (raw)");
|
|
for (i = 0; i < msg_len; i++) printk(" %02x", data[i]);
|
|
printk ("\n");
|
|
}
|
|
}
|
|
bt->read_count = 0; /* paranoia */
|
|
return msg_len;
|
|
}
|
|
|
|
/* This bit's functionality is optional */
|
|
#define BT_BMC_HWRST 0x80
|
|
|
|
static void reset_flags(struct si_sm_data *bt)
|
|
{
|
|
if (BT_STATUS & BT_H_BUSY) BT_CONTROL(BT_H_BUSY);
|
|
if (BT_STATUS & BT_B_BUSY) BT_CONTROL(BT_B_BUSY);
|
|
BT_CONTROL(BT_CLR_WR_PTR);
|
|
BT_CONTROL(BT_SMS_ATN);
|
|
BT_INTMASK_W(BT_BMC_HWRST);
|
|
#ifdef DEVELOPMENT_ONLY_NOT_FOR_PRODUCTION
|
|
if (BT_STATUS & BT_B2H_ATN) {
|
|
int i;
|
|
BT_CONTROL(BT_H_BUSY);
|
|
BT_CONTROL(BT_B2H_ATN);
|
|
BT_CONTROL(BT_CLR_RD_PTR);
|
|
for (i = 0; i < IPMI_MAX_MSG_LENGTH + 2; i++) BMC2HOST;
|
|
BT_CONTROL(BT_H_BUSY);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static inline void write_all_bytes(struct si_sm_data *bt)
|
|
{
|
|
int i;
|
|
|
|
if (bt_debug & BT_DEBUG_MSG) {
|
|
printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
|
|
bt->write_count, bt->seq);
|
|
for (i = 0; i < bt->write_count; i++)
|
|
printk (" %02x", bt->write_data[i]);
|
|
printk ("\n");
|
|
}
|
|
for (i = 0; i < bt->write_count; i++) HOST2BMC(bt->write_data[i]);
|
|
}
|
|
|
|
static inline int read_all_bytes(struct si_sm_data *bt)
|
|
{
|
|
unsigned char i;
|
|
|
|
bt->read_data[0] = BMC2HOST;
|
|
bt->read_count = bt->read_data[0];
|
|
if (bt_debug & BT_DEBUG_MSG)
|
|
printk(KERN_WARNING "BT: read %d bytes:", bt->read_count);
|
|
|
|
/* minimum: length, NetFn, Seq, Cmd, cCode == 5 total, or 4 more
|
|
following the length byte. */
|
|
if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) {
|
|
if (bt_debug & BT_DEBUG_MSG)
|
|
printk("bad length %d\n", bt->read_count);
|
|
bt->truncated = 1;
|
|
return 1; /* let next XACTION START clean it up */
|
|
}
|
|
for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST;
|
|
bt->read_count++; /* account for the length byte */
|
|
|
|
if (bt_debug & BT_DEBUG_MSG) {
|
|
for (i = 0; i < bt->read_count; i++)
|
|
printk (" %02x", bt->read_data[i]);
|
|
printk ("\n");
|
|
}
|
|
if (bt->seq != bt->write_data[2]) /* idiot check */
|
|
printk(KERN_WARNING "BT: internal error: sequence mismatch\n");
|
|
|
|
/* per the spec, the (NetFn, Seq, Cmd) tuples should match */
|
|
if ((bt->read_data[3] == bt->write_data[3]) && /* Cmd */
|
|
(bt->read_data[2] == bt->write_data[2]) && /* Sequence */
|
|
((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8)))
|
|
return 1;
|
|
|
|
if (bt_debug & BT_DEBUG_MSG) printk(KERN_WARNING "BT: bad packet: "
|
|
"want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n",
|
|
bt->write_data[1], bt->write_data[2], bt->write_data[3],
|
|
bt->read_data[1], bt->read_data[2], bt->read_data[3]);
|
|
return 0;
|
|
}
|
|
|
|
/* Modifies bt->state appropriately, need to get into the bt_event() switch */
|
|
|
|
static void error_recovery(struct si_sm_data *bt, char *reason)
|
|
{
|
|
unsigned char status;
|
|
char buf[40]; /* For getting status */
|
|
|
|
bt->timeout = BT_NORMAL_TIMEOUT; /* various places want to retry */
|
|
|
|
status = BT_STATUS;
|
|
printk(KERN_WARNING "BT: %s in %s %s ", reason, STATE2TXT,
|
|
STATUS2TXT(buf));
|
|
|
|
(bt->error_retries)++;
|
|
if (bt->error_retries > BT_RETRY_LIMIT) {
|
|
printk("retry limit (%d) exceeded\n", BT_RETRY_LIMIT);
|
|
bt->state = BT_STATE_HOSED;
|
|
if (!bt->nonzero_status)
|
|
printk(KERN_ERR "IPMI: BT stuck, try power cycle\n");
|
|
else if (bt->seq == FIRST_SEQ + BT_RETRY_LIMIT) {
|
|
/* most likely during insmod */
|
|
printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n");
|
|
bt->state = BT_STATE_RESET1;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Sometimes the BMC queues get in an "off-by-one" state...*/
|
|
if ((bt->state == BT_STATE_B2H_WAIT) && (status & BT_B2H_ATN)) {
|
|
printk("retry B2H_WAIT\n");
|
|
return;
|
|
}
|
|
|
|
printk("restart command\n");
|
|
bt->state = BT_STATE_RESTART;
|
|
}
|
|
|
|
/* Check the status and (possibly) advance the BT state machine. The
|
|
default return is SI_SM_CALL_WITH_DELAY. */
|
|
|
|
static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
|
|
{
|
|
unsigned char status;
|
|
char buf[40]; /* For getting status */
|
|
int i;
|
|
|
|
status = BT_STATUS;
|
|
bt->nonzero_status |= status;
|
|
|
|
if ((bt_debug & BT_DEBUG_STATES) && (bt->state != bt->last_state))
|
|
printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n",
|
|
STATE2TXT,
|
|
STATUS2TXT(buf),
|
|
bt->timeout,
|
|
time);
|
|
bt->last_state = bt->state;
|
|
|
|
if (bt->state == BT_STATE_HOSED) return SI_SM_HOSED;
|
|
|
|
if (bt->state != BT_STATE_IDLE) { /* do timeout test */
|
|
|
|
/* Certain states, on error conditions, can lock up a CPU
|
|
because they are effectively in an infinite loop with
|
|
CALL_WITHOUT_DELAY (right back here with time == 0).
|
|
Prevent infinite lockup by ALWAYS decrementing timeout. */
|
|
|
|
/* FIXME: bt_event is sometimes called with time > BT_NORMAL_TIMEOUT
|
|
(noticed in ipmi_smic_sm.c January 2004) */
|
|
|
|
if ((time <= 0) || (time >= BT_NORMAL_TIMEOUT)) time = 100;
|
|
bt->timeout -= time;
|
|
if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) {
|
|
error_recovery(bt, "timed out");
|
|
return SI_SM_CALL_WITHOUT_DELAY;
|
|
}
|
|
}
|
|
|
|
switch (bt->state) {
|
|
|
|
case BT_STATE_IDLE: /* check for asynchronous messages */
|
|
if (status & BT_SMS_ATN) {
|
|
BT_CONTROL(BT_SMS_ATN); /* clear it */
|
|
return SI_SM_ATTN;
|
|
}
|
|
return SI_SM_IDLE;
|
|
|
|
case BT_STATE_XACTION_START:
|
|
if (status & BT_H_BUSY) {
|
|
BT_CONTROL(BT_H_BUSY);
|
|
break;
|
|
}
|
|
if (status & BT_B2H_ATN) break;
|
|
bt->state = BT_STATE_WRITE_BYTES;
|
|
return SI_SM_CALL_WITHOUT_DELAY; /* for logging */
|
|
|
|
case BT_STATE_WRITE_BYTES:
|
|
if (status & (BT_B_BUSY | BT_H2B_ATN)) break;
|
|
BT_CONTROL(BT_CLR_WR_PTR);
|
|
write_all_bytes(bt);
|
|
BT_CONTROL(BT_H2B_ATN); /* clears too fast to catch? */
|
|
bt->state = BT_STATE_WRITE_CONSUME;
|
|
return SI_SM_CALL_WITHOUT_DELAY; /* it MIGHT sail through */
|
|
|
|
case BT_STATE_WRITE_CONSUME: /* BMCs usually blow right thru here */
|
|
if (status & (BT_H2B_ATN | BT_B_BUSY)) break;
|
|
bt->state = BT_STATE_B2H_WAIT;
|
|
/* fall through with status */
|
|
|
|
/* Stay in BT_STATE_B2H_WAIT until a packet matches. However, spinning
|
|
hard here, constantly reading status, seems to hold off the
|
|
generation of B2H_ATN so ALWAYS return CALL_WITH_DELAY. */
|
|
|
|
case BT_STATE_B2H_WAIT:
|
|
if (!(status & BT_B2H_ATN)) break;
|
|
|
|
/* Assume ordered, uncached writes: no need to wait */
|
|
if (!(status & BT_H_BUSY)) BT_CONTROL(BT_H_BUSY); /* set */
|
|
BT_CONTROL(BT_B2H_ATN); /* clear it, ACK to the BMC */
|
|
BT_CONTROL(BT_CLR_RD_PTR); /* reset the queue */
|
|
i = read_all_bytes(bt);
|
|
BT_CONTROL(BT_H_BUSY); /* clear */
|
|
if (!i) break; /* Try this state again */
|
|
bt->state = BT_STATE_READ_END;
|
|
return SI_SM_CALL_WITHOUT_DELAY; /* for logging */
|
|
|
|
case BT_STATE_READ_END:
|
|
|
|
/* I could wait on BT_H_BUSY to go clear for a truly clean
|
|
exit. However, this is already done in XACTION_START
|
|
and the (possible) extra loop/status/possible wait affects
|
|
performance. So, as long as it works, just ignore H_BUSY */
|
|
|
|
#ifdef MAKE_THIS_TRUE_IF_NECESSARY
|
|
|
|
if (status & BT_H_BUSY) break;
|
|
#endif
|
|
bt->seq++;
|
|
bt->state = BT_STATE_IDLE;
|
|
return SI_SM_TRANSACTION_COMPLETE;
|
|
|
|
case BT_STATE_RESET1:
|
|
reset_flags(bt);
|
|
bt->timeout = BT_RESET_DELAY;
|
|
bt->state = BT_STATE_RESET2;
|
|
break;
|
|
|
|
case BT_STATE_RESET2: /* Send a soft reset */
|
|
BT_CONTROL(BT_CLR_WR_PTR);
|
|
HOST2BMC(3); /* number of bytes following */
|
|
HOST2BMC(0x18); /* NetFn/LUN == Application, LUN 0 */
|
|
HOST2BMC(42); /* Sequence number */
|
|
HOST2BMC(3); /* Cmd == Soft reset */
|
|
BT_CONTROL(BT_H2B_ATN);
|
|
bt->state = BT_STATE_RESET3;
|
|
break;
|
|
|
|
case BT_STATE_RESET3:
|
|
if (bt->timeout > 0) return SI_SM_CALL_WITH_DELAY;
|
|
bt->state = BT_STATE_RESTART; /* printk in debug modes */
|
|
break;
|
|
|
|
case BT_STATE_RESTART: /* don't reset retries! */
|
|
bt->write_data[2] = ++bt->seq;
|
|
bt->read_count = 0;
|
|
bt->nonzero_status = 0;
|
|
bt->timeout = BT_NORMAL_TIMEOUT;
|
|
bt->state = BT_STATE_XACTION_START;
|
|
break;
|
|
|
|
default: /* HOSED is supposed to be caught much earlier */
|
|
error_recovery(bt, "internal logic error");
|
|
break;
|
|
}
|
|
return SI_SM_CALL_WITH_DELAY;
|
|
}
|
|
|
|
static int bt_detect(struct si_sm_data *bt)
|
|
{
|
|
/* It's impossible for the BT status and interrupt registers to be
|
|
all 1's, (assuming a properly functioning, self-initialized BMC)
|
|
but that's what you get from reading a bogus address, so we
|
|
test that first. The calling routine uses negative logic. */
|
|
|
|
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) return 1;
|
|
reset_flags(bt);
|
|
return 0;
|
|
}
|
|
|
|
static void bt_cleanup(struct si_sm_data *bt)
|
|
{
|
|
}
|
|
|
|
static int bt_size(void)
|
|
{
|
|
return sizeof(struct si_sm_data);
|
|
}
|
|
|
|
struct si_sm_handlers bt_smi_handlers =
|
|
{
|
|
.version = IPMI_BT_VERSION,
|
|
.init_data = bt_init_data,
|
|
.start_transaction = bt_start_transaction,
|
|
.get_result = bt_get_result,
|
|
.event = bt_event,
|
|
.detect = bt_detect,
|
|
.cleanup = bt_cleanup,
|
|
.size = bt_size,
|
|
};
|