73287a43cc
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
427 lines
11 KiB
C
427 lines
11 KiB
C
/*
|
|
* Copyright (c) 2012 Smith Micro Software, Inc.
|
|
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
|
|
*
|
|
* This driver is based on and reuse most of cdc_ncm, which is
|
|
* Copyright (C) ST-Ericsson 2010-2012
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/cdc.h>
|
|
#include <linux/usb/usbnet.h>
|
|
#include <linux/usb/cdc-wdm.h>
|
|
#include <linux/usb/cdc_ncm.h>
|
|
|
|
/* driver specific data - must match cdc_ncm usage */
|
|
struct cdc_mbim_state {
|
|
struct cdc_ncm_ctx *ctx;
|
|
atomic_t pmcount;
|
|
struct usb_driver *subdriver;
|
|
struct usb_interface *control;
|
|
struct usb_interface *data;
|
|
};
|
|
|
|
/* using a counter to merge subdriver requests with our own into a combined state */
|
|
static int cdc_mbim_manage_power(struct usbnet *dev, int on)
|
|
{
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
int rv = 0;
|
|
|
|
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
|
|
|
|
if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
|
|
/* need autopm_get/put here to ensure the usbcore sees the new value */
|
|
rv = usb_autopm_get_interface(dev->intf);
|
|
if (rv < 0)
|
|
goto err;
|
|
dev->intf->needs_remote_wakeup = on;
|
|
usb_autopm_put_interface(dev->intf);
|
|
}
|
|
err:
|
|
return rv;
|
|
}
|
|
|
|
static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
|
|
{
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
|
|
/* can be called while disconnecting */
|
|
if (!dev)
|
|
return 0;
|
|
|
|
return cdc_mbim_manage_power(dev, status);
|
|
}
|
|
|
|
|
|
static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct cdc_ncm_ctx *ctx;
|
|
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
|
|
int ret = -ENODEV;
|
|
u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
|
|
/* Probably NCM, defer for cdc_ncm_bind */
|
|
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
|
|
goto err;
|
|
|
|
ret = cdc_ncm_bind_common(dev, intf, data_altsetting);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ctx = info->ctx;
|
|
|
|
/* The MBIM descriptor and the status endpoint are required */
|
|
if (ctx->mbim_desc && dev->status)
|
|
subdriver = usb_cdc_wdm_register(ctx->control,
|
|
&dev->status->desc,
|
|
le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
|
|
cdc_mbim_wdm_manage_power);
|
|
if (IS_ERR(subdriver)) {
|
|
ret = PTR_ERR(subdriver);
|
|
cdc_ncm_unbind(dev, intf);
|
|
goto err;
|
|
}
|
|
|
|
/* can't let usbnet use the interrupt endpoint */
|
|
dev->status = NULL;
|
|
info->subdriver = subdriver;
|
|
|
|
/* MBIM cannot do ARP */
|
|
dev->net->flags |= IFF_NOARP;
|
|
|
|
/* no need to put the VLAN tci in the packet headers */
|
|
dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
struct cdc_ncm_ctx *ctx = info->ctx;
|
|
|
|
/* disconnect subdriver from control interface */
|
|
if (info->subdriver && info->subdriver->disconnect)
|
|
info->subdriver->disconnect(ctx->control);
|
|
info->subdriver = NULL;
|
|
|
|
/* let NCM unbind clean up both control and data interface */
|
|
cdc_ncm_unbind(dev, intf);
|
|
}
|
|
|
|
|
|
static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
|
|
{
|
|
struct sk_buff *skb_out;
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
struct cdc_ncm_ctx *ctx = info->ctx;
|
|
__le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
|
|
u16 tci = 0;
|
|
u8 *c;
|
|
|
|
if (!ctx)
|
|
goto error;
|
|
|
|
if (skb) {
|
|
if (skb->len <= ETH_HLEN)
|
|
goto error;
|
|
|
|
/* mapping VLANs to MBIM sessions:
|
|
* no tag => IPS session <0>
|
|
* 1 - 255 => IPS session <vlanid>
|
|
* 256 - 511 => DSS session <vlanid - 256>
|
|
* 512 - 4095 => unsupported, drop
|
|
*/
|
|
vlan_get_tag(skb, &tci);
|
|
|
|
switch (tci & 0x0f00) {
|
|
case 0x0000: /* VLAN ID 0 - 255 */
|
|
/* verify that datagram is IPv4 or IPv6 */
|
|
skb_reset_mac_header(skb);
|
|
switch (eth_hdr(skb)->h_proto) {
|
|
case htons(ETH_P_IP):
|
|
case htons(ETH_P_IPV6):
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
c = (u8 *)&sign;
|
|
c[3] = tci;
|
|
break;
|
|
case 0x0100: /* VLAN ID 256 - 511 */
|
|
sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
|
|
c = (u8 *)&sign;
|
|
c[3] = tci;
|
|
break;
|
|
default:
|
|
netif_err(dev, tx_err, dev->net,
|
|
"unsupported tci=0x%04x\n", tci);
|
|
goto error;
|
|
}
|
|
skb_pull(skb, ETH_HLEN);
|
|
}
|
|
|
|
spin_lock_bh(&ctx->mtx);
|
|
skb_out = cdc_ncm_fill_tx_frame(ctx, skb, sign);
|
|
spin_unlock_bh(&ctx->mtx);
|
|
return skb_out;
|
|
|
|
error:
|
|
if (skb)
|
|
dev_kfree_skb_any(skb);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
|
|
{
|
|
__be16 proto = htons(ETH_P_802_3);
|
|
struct sk_buff *skb = NULL;
|
|
|
|
if (tci < 256) { /* IPS session? */
|
|
if (len < sizeof(struct iphdr))
|
|
goto err;
|
|
|
|
switch (*buf & 0xf0) {
|
|
case 0x40:
|
|
proto = htons(ETH_P_IP);
|
|
break;
|
|
case 0x60:
|
|
proto = htons(ETH_P_IPV6);
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
skb = netdev_alloc_skb_ip_align(dev->net, len + ETH_HLEN);
|
|
if (!skb)
|
|
goto err;
|
|
|
|
/* add an ethernet header */
|
|
skb_put(skb, ETH_HLEN);
|
|
skb_reset_mac_header(skb);
|
|
eth_hdr(skb)->h_proto = proto;
|
|
memset(eth_hdr(skb)->h_source, 0, ETH_ALEN);
|
|
memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
|
|
|
|
/* add datagram */
|
|
memcpy(skb_put(skb, len), buf, len);
|
|
|
|
/* map MBIM session to VLAN */
|
|
if (tci)
|
|
vlan_put_tag(skb, htons(ETH_P_8021Q), tci);
|
|
err:
|
|
return skb;
|
|
}
|
|
|
|
static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
struct cdc_ncm_ctx *ctx = info->ctx;
|
|
int len;
|
|
int nframes;
|
|
int x;
|
|
int offset;
|
|
struct usb_cdc_ncm_ndp16 *ndp16;
|
|
struct usb_cdc_ncm_dpe16 *dpe16;
|
|
int ndpoffset;
|
|
int loopcount = 50; /* arbitrary max preventing infinite loop */
|
|
u8 *c;
|
|
u16 tci;
|
|
|
|
ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
|
|
if (ndpoffset < 0)
|
|
goto error;
|
|
|
|
next_ndp:
|
|
nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
|
|
if (nframes < 0)
|
|
goto error;
|
|
|
|
ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
|
|
|
|
switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
|
|
case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
|
|
c = (u8 *)&ndp16->dwSignature;
|
|
tci = c[3];
|
|
break;
|
|
case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
|
|
c = (u8 *)&ndp16->dwSignature;
|
|
tci = c[3] + 256;
|
|
break;
|
|
default:
|
|
netif_dbg(dev, rx_err, dev->net,
|
|
"unsupported NDP signature <0x%08x>\n",
|
|
le32_to_cpu(ndp16->dwSignature));
|
|
goto err_ndp;
|
|
|
|
}
|
|
|
|
dpe16 = ndp16->dpe16;
|
|
for (x = 0; x < nframes; x++, dpe16++) {
|
|
offset = le16_to_cpu(dpe16->wDatagramIndex);
|
|
len = le16_to_cpu(dpe16->wDatagramLength);
|
|
|
|
/*
|
|
* CDC NCM ch. 3.7
|
|
* All entries after first NULL entry are to be ignored
|
|
*/
|
|
if ((offset == 0) || (len == 0)) {
|
|
if (!x)
|
|
goto err_ndp; /* empty NTB */
|
|
break;
|
|
}
|
|
|
|
/* sanity checking */
|
|
if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
|
|
netif_dbg(dev, rx_err, dev->net,
|
|
"invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
|
|
x, offset, len, skb_in);
|
|
if (!x)
|
|
goto err_ndp;
|
|
break;
|
|
} else {
|
|
skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
|
|
if (!skb)
|
|
goto error;
|
|
usbnet_skb_return(dev, skb);
|
|
}
|
|
}
|
|
err_ndp:
|
|
/* are there more NDPs to process? */
|
|
ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
|
|
if (ndpoffset && loopcount--)
|
|
goto next_ndp;
|
|
|
|
return 1;
|
|
error:
|
|
return 0;
|
|
}
|
|
|
|
static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
int ret = 0;
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
struct cdc_ncm_ctx *ctx = info->ctx;
|
|
|
|
if (ctx == NULL) {
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
|
|
/*
|
|
* Both usbnet_suspend() and subdriver->suspend() MUST return 0
|
|
* in system sleep context, otherwise, the resume callback has
|
|
* to recover device from previous suspend failure.
|
|
*/
|
|
ret = usbnet_suspend(intf, message);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
|
|
ret = info->subdriver->suspend(intf, message);
|
|
if (ret < 0)
|
|
usbnet_resume(intf);
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int cdc_mbim_resume(struct usb_interface *intf)
|
|
{
|
|
int ret = 0;
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
struct cdc_mbim_state *info = (void *)&dev->data;
|
|
struct cdc_ncm_ctx *ctx = info->ctx;
|
|
bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
|
|
|
|
if (callsub)
|
|
ret = info->subdriver->resume(intf);
|
|
if (ret < 0)
|
|
goto err;
|
|
ret = usbnet_resume(intf);
|
|
if (ret < 0 && callsub && info->subdriver->suspend)
|
|
info->subdriver->suspend(intf, PMSG_SUSPEND);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static const struct driver_info cdc_mbim_info = {
|
|
.description = "CDC MBIM",
|
|
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
|
|
.bind = cdc_mbim_bind,
|
|
.unbind = cdc_mbim_unbind,
|
|
.manage_power = cdc_mbim_manage_power,
|
|
.rx_fixup = cdc_mbim_rx_fixup,
|
|
.tx_fixup = cdc_mbim_tx_fixup,
|
|
};
|
|
|
|
/* MBIM and NCM devices should not need a ZLP after NTBs with
|
|
* dwNtbOutMaxSize length. This driver_info is for the exceptional
|
|
* devices requiring it anyway, allowing them to be supported without
|
|
* forcing the performance penalty on all the sane devices.
|
|
*/
|
|
static const struct driver_info cdc_mbim_info_zlp = {
|
|
.description = "CDC MBIM",
|
|
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
|
|
.bind = cdc_mbim_bind,
|
|
.unbind = cdc_mbim_unbind,
|
|
.manage_power = cdc_mbim_manage_power,
|
|
.rx_fixup = cdc_mbim_rx_fixup,
|
|
.tx_fixup = cdc_mbim_tx_fixup,
|
|
};
|
|
|
|
static const struct usb_device_id mbim_devs[] = {
|
|
/* This duplicate NCM entry is intentional. MBIM devices can
|
|
* be disguised as NCM by default, and this is necessary to
|
|
* allow us to bind the correct driver_info to such devices.
|
|
*
|
|
* bind() will sort out this for us, selecting the correct
|
|
* entry and reject the other
|
|
*/
|
|
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
|
|
.driver_info = (unsigned long)&cdc_mbim_info,
|
|
},
|
|
/* Sierra Wireless MC7710 need ZLPs */
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68a2, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
|
|
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
|
|
},
|
|
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
|
|
.driver_info = (unsigned long)&cdc_mbim_info,
|
|
},
|
|
{
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, mbim_devs);
|
|
|
|
static struct usb_driver cdc_mbim_driver = {
|
|
.name = "cdc_mbim",
|
|
.id_table = mbim_devs,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = cdc_mbim_suspend,
|
|
.resume = cdc_mbim_resume,
|
|
.reset_resume = cdc_mbim_resume,
|
|
.supports_autosuspend = 1,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
module_usb_driver(cdc_mbim_driver);
|
|
|
|
MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
|
|
MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
|
|
MODULE_DESCRIPTION("USB CDC MBIM host driver");
|
|
MODULE_LICENSE("GPL");
|