b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
96 lines
3 KiB
C
96 lines
3 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef LINUX_CRASH_DUMP_H
|
|
#define LINUX_CRASH_DUMP_H
|
|
|
|
#ifdef CONFIG_CRASH_DUMP
|
|
#include <linux/kexec.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/elf.h>
|
|
|
|
#include <asm/pgtable.h> /* for pgprot_t */
|
|
|
|
#define ELFCORE_ADDR_MAX (-1ULL)
|
|
#define ELFCORE_ADDR_ERR (-2ULL)
|
|
|
|
extern unsigned long long elfcorehdr_addr;
|
|
extern unsigned long long elfcorehdr_size;
|
|
|
|
extern int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size);
|
|
extern void elfcorehdr_free(unsigned long long addr);
|
|
extern ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos);
|
|
extern ssize_t elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos);
|
|
extern int remap_oldmem_pfn_range(struct vm_area_struct *vma,
|
|
unsigned long from, unsigned long pfn,
|
|
unsigned long size, pgprot_t prot);
|
|
|
|
extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
|
|
unsigned long, int);
|
|
void vmcore_cleanup(void);
|
|
|
|
/* Architecture code defines this if there are other possible ELF
|
|
* machine types, e.g. on bi-arch capable hardware. */
|
|
#ifndef vmcore_elf_check_arch_cross
|
|
#define vmcore_elf_check_arch_cross(x) 0
|
|
#endif
|
|
|
|
/*
|
|
* Architecture code can redefine this if there are any special checks
|
|
* needed for 32-bit ELF or 64-bit ELF vmcores. In case of 32-bit
|
|
* only architecture, vmcore_elf64_check_arch can be set to zero.
|
|
*/
|
|
#ifndef vmcore_elf32_check_arch
|
|
#define vmcore_elf32_check_arch(x) elf_check_arch(x)
|
|
#endif
|
|
|
|
#ifndef vmcore_elf64_check_arch
|
|
#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
|
|
#endif
|
|
|
|
/*
|
|
* is_kdump_kernel() checks whether this kernel is booting after a panic of
|
|
* previous kernel or not. This is determined by checking if previous kernel
|
|
* has passed the elf core header address on command line.
|
|
*
|
|
* This is not just a test if CONFIG_CRASH_DUMP is enabled or not. It will
|
|
* return 1 if CONFIG_CRASH_DUMP=y and if kernel is booting after a panic of
|
|
* previous kernel.
|
|
*/
|
|
|
|
static inline int is_kdump_kernel(void)
|
|
{
|
|
return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
|
|
}
|
|
|
|
/* is_vmcore_usable() checks if the kernel is booting after a panic and
|
|
* the vmcore region is usable.
|
|
*
|
|
* This makes use of the fact that due to alignment -2ULL is not
|
|
* a valid pointer, much in the vain of IS_ERR(), except
|
|
* dealing directly with an unsigned long long rather than a pointer.
|
|
*/
|
|
|
|
static inline int is_vmcore_usable(void)
|
|
{
|
|
return is_kdump_kernel() && elfcorehdr_addr != ELFCORE_ADDR_ERR ? 1 : 0;
|
|
}
|
|
|
|
/* vmcore_unusable() marks the vmcore as unusable,
|
|
* without disturbing the logic of is_kdump_kernel()
|
|
*/
|
|
|
|
static inline void vmcore_unusable(void)
|
|
{
|
|
if (is_kdump_kernel())
|
|
elfcorehdr_addr = ELFCORE_ADDR_ERR;
|
|
}
|
|
|
|
#define HAVE_OLDMEM_PFN_IS_RAM 1
|
|
extern int register_oldmem_pfn_is_ram(int (*fn)(unsigned long pfn));
|
|
extern void unregister_oldmem_pfn_is_ram(void);
|
|
|
|
#else /* !CONFIG_CRASH_DUMP */
|
|
static inline int is_kdump_kernel(void) { return 0; }
|
|
#endif /* CONFIG_CRASH_DUMP */
|
|
|
|
extern unsigned long saved_max_pfn;
|
|
#endif /* LINUX_CRASHDUMP_H */
|