9d911d7903
An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [<a000000100016390>] show_stack+0x50/0xa0 [<a000000100016c60>] show_regs+0x820/0x860 [<a00000010003b390>] die+0x190/0x2a0 [<a000000100066a40>] ia64_do_page_fault+0x8e0/0xa40 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 [<a0000001003b2660>] pci_remove_bus_device+0x120/0x260 [<a0000002060549f0>] acpiphp_disable_slot+0x410/0x540 [acpiphp] [<a0000002060505c0>] disable_slot+0xc0/0x120 [acpiphp] [<a0000002040d21c0>] power_write_file+0x1e0/0x2a0 [pci_hotplug] [<a0000001003bb820>] pci_slot_attr_store+0x60/0xa0 [<a000000100240f70>] sysfs_write_file+0x230/0x2c0 [<a000000100195750>] vfs_write+0x190/0x2e0 [<a0000001001961a0>] sys_write+0x80/0x100 [<a00000010000c600>] ia64_ret_from_syscall+0x0/0x20 [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
1817 lines
43 KiB
C
1817 lines
43 KiB
C
/*
|
|
* ACPI PCI HotPlug glue functions to ACPI CA subsystem
|
|
*
|
|
* Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
|
|
* Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
|
|
* Copyright (C) 2002,2003 NEC Corporation
|
|
* Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
|
|
* Copyright (C) 2003-2005 Hewlett Packard
|
|
* Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com)
|
|
* Copyright (C) 2005 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Lifetime rules for pci_dev:
|
|
* - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
|
|
* when the bridge is scanned and it loses a refcount when the bridge
|
|
* is removed.
|
|
* - When a P2P bridge is present, we elevate the refcount on the subordinate
|
|
* bus. It loses the refcount when the the driver unloads.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_hotplug.h>
|
|
#include <linux/pci-acpi.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include "../pci.h"
|
|
#include "acpiphp.h"
|
|
|
|
static LIST_HEAD(bridge_list);
|
|
static LIST_HEAD(ioapic_list);
|
|
static DEFINE_SPINLOCK(ioapic_list_lock);
|
|
|
|
#define MY_NAME "acpiphp_glue"
|
|
|
|
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
|
|
static void acpiphp_sanitize_bus(struct pci_bus *bus);
|
|
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
|
|
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
|
|
|
|
/* callback routine to check for the existence of a pci dock device */
|
|
static acpi_status
|
|
is_pci_dock_device(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
int *count = (int *)context;
|
|
|
|
if (is_dock_device(handle)) {
|
|
(*count)++;
|
|
return AE_CTRL_TERMINATE;
|
|
} else {
|
|
return AE_OK;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* the _DCK method can do funny things... and sometimes not
|
|
* hah-hah funny.
|
|
*
|
|
* TBD - figure out a way to only call fixups for
|
|
* systems that require them.
|
|
*/
|
|
static int post_dock_fixups(struct notifier_block *nb, unsigned long val,
|
|
void *v)
|
|
{
|
|
struct acpiphp_func *func = container_of(nb, struct acpiphp_func, nb);
|
|
struct pci_bus *bus = func->slot->bridge->pci_bus;
|
|
u32 buses;
|
|
|
|
if (!bus->self)
|
|
return NOTIFY_OK;
|
|
|
|
/* fixup bad _DCK function that rewrites
|
|
* secondary bridge on slot
|
|
*/
|
|
pci_read_config_dword(bus->self,
|
|
PCI_PRIMARY_BUS,
|
|
&buses);
|
|
|
|
if (((buses >> 8) & 0xff) != bus->secondary) {
|
|
buses = (buses & 0xff000000)
|
|
| ((unsigned int)(bus->primary) << 0)
|
|
| ((unsigned int)(bus->secondary) << 8)
|
|
| ((unsigned int)(bus->subordinate) << 16);
|
|
pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses);
|
|
}
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
|
|
static struct acpi_dock_ops acpiphp_dock_ops = {
|
|
.handler = handle_hotplug_event_func,
|
|
};
|
|
|
|
/* callback routine to register each ACPI PCI slot object */
|
|
static acpi_status
|
|
register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context;
|
|
struct acpiphp_slot *slot;
|
|
struct acpiphp_func *newfunc;
|
|
acpi_handle tmp;
|
|
acpi_status status = AE_OK;
|
|
unsigned long long adr, sun;
|
|
int device, function, retval;
|
|
struct pci_bus *pbus = bridge->pci_bus;
|
|
struct pci_dev *pdev;
|
|
|
|
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
|
|
return AE_OK;
|
|
|
|
acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
|
|
device = (adr >> 16) & 0xffff;
|
|
function = adr & 0xffff;
|
|
|
|
newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
|
|
if (!newfunc)
|
|
return AE_NO_MEMORY;
|
|
|
|
INIT_LIST_HEAD(&newfunc->sibling);
|
|
newfunc->handle = handle;
|
|
newfunc->function = function;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
|
|
newfunc->flags = FUNC_HAS_EJ0;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp)))
|
|
newfunc->flags |= FUNC_HAS_STA;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp)))
|
|
newfunc->flags |= FUNC_HAS_PS0;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp)))
|
|
newfunc->flags |= FUNC_HAS_PS3;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp)))
|
|
newfunc->flags |= FUNC_HAS_DCK;
|
|
|
|
status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
|
|
if (ACPI_FAILURE(status)) {
|
|
/*
|
|
* use the count of the number of slots we've found
|
|
* for the number of the slot
|
|
*/
|
|
sun = bridge->nr_slots+1;
|
|
}
|
|
|
|
/* search for objects that share the same slot */
|
|
for (slot = bridge->slots; slot; slot = slot->next)
|
|
if (slot->device == device) {
|
|
if (slot->sun != sun)
|
|
warn("sibling found, but _SUN doesn't match!\n");
|
|
break;
|
|
}
|
|
|
|
if (!slot) {
|
|
slot = kzalloc(sizeof(struct acpiphp_slot), GFP_KERNEL);
|
|
if (!slot) {
|
|
kfree(newfunc);
|
|
return AE_NO_MEMORY;
|
|
}
|
|
|
|
slot->bridge = bridge;
|
|
slot->device = device;
|
|
slot->sun = sun;
|
|
INIT_LIST_HEAD(&slot->funcs);
|
|
mutex_init(&slot->crit_sect);
|
|
|
|
slot->next = bridge->slots;
|
|
bridge->slots = slot;
|
|
|
|
bridge->nr_slots++;
|
|
|
|
dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
|
|
slot->sun, pci_domain_nr(pbus), pbus->number, device);
|
|
retval = acpiphp_register_hotplug_slot(slot);
|
|
if (retval) {
|
|
if (retval == -EBUSY)
|
|
warn("Slot %llu already registered by another "
|
|
"hotplug driver\n", slot->sun);
|
|
else
|
|
warn("acpiphp_register_hotplug_slot failed "
|
|
"(err code = 0x%x)\n", retval);
|
|
goto err_exit;
|
|
}
|
|
}
|
|
|
|
newfunc->slot = slot;
|
|
list_add_tail(&newfunc->sibling, &slot->funcs);
|
|
|
|
pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
|
|
if (pdev) {
|
|
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
|
|
pci_dev_put(pdev);
|
|
}
|
|
|
|
if (is_dock_device(handle)) {
|
|
/* we don't want to call this device's _EJ0
|
|
* because we want the dock notify handler
|
|
* to call it after it calls _DCK
|
|
*/
|
|
newfunc->flags &= ~FUNC_HAS_EJ0;
|
|
if (register_hotplug_dock_device(handle,
|
|
&acpiphp_dock_ops, newfunc))
|
|
dbg("failed to register dock device\n");
|
|
|
|
/* we need to be notified when dock events happen
|
|
* outside of the hotplug operation, since we may
|
|
* need to do fixups before we can hotplug.
|
|
*/
|
|
newfunc->nb.notifier_call = post_dock_fixups;
|
|
if (register_dock_notifier(&newfunc->nb))
|
|
dbg("failed to register a dock notifier");
|
|
}
|
|
|
|
/* install notify handler */
|
|
if (!(newfunc->flags & FUNC_HAS_DCK)) {
|
|
status = acpi_install_notify_handler(handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_func,
|
|
newfunc);
|
|
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to register interrupt notify handler\n");
|
|
} else
|
|
status = AE_OK;
|
|
|
|
return status;
|
|
|
|
err_exit:
|
|
bridge->nr_slots--;
|
|
bridge->slots = slot->next;
|
|
kfree(slot);
|
|
kfree(newfunc);
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
|
|
/* see if it's worth looking at this bridge */
|
|
static int detect_ejectable_slots(struct pci_bus *pbus)
|
|
{
|
|
int found = acpi_pci_detect_ejectable(pbus);
|
|
if (!found) {
|
|
acpi_handle bridge_handle = acpi_pci_get_bridge_handle(pbus);
|
|
if (!bridge_handle)
|
|
return 0;
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
|
|
is_pci_dock_device, (void *)&found, NULL);
|
|
}
|
|
return found;
|
|
}
|
|
|
|
|
|
/* decode ACPI 2.0 _HPP hot plug parameters */
|
|
static void decode_hpp(struct acpiphp_bridge *bridge)
|
|
{
|
|
acpi_status status;
|
|
|
|
status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp);
|
|
if (ACPI_FAILURE(status) ||
|
|
!bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) {
|
|
/* use default numbers */
|
|
printk(KERN_WARNING
|
|
"%s: Could not get hotplug parameters. Use defaults\n",
|
|
__func__);
|
|
bridge->hpp.t0 = &bridge->hpp.type0_data;
|
|
bridge->hpp.t0->revision = 0;
|
|
bridge->hpp.t0->cache_line_size = 0x10;
|
|
bridge->hpp.t0->latency_timer = 0x40;
|
|
bridge->hpp.t0->enable_serr = 0;
|
|
bridge->hpp.t0->enable_perr = 0;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */
|
|
static void init_bridge_misc(struct acpiphp_bridge *bridge)
|
|
{
|
|
acpi_status status;
|
|
|
|
/* decode ACPI 2.0 _HPP (hot plug parameters) */
|
|
decode_hpp(bridge);
|
|
|
|
/* must be added to the list prior to calling register_slot */
|
|
list_add(&bridge->list, &bridge_list);
|
|
|
|
/* register all slot objects under this bridge */
|
|
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1,
|
|
register_slot, bridge, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
list_del(&bridge->list);
|
|
return;
|
|
}
|
|
|
|
/* install notify handler */
|
|
if (bridge->type != BRIDGE_TYPE_HOST) {
|
|
if ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func) {
|
|
status = acpi_remove_notify_handler(bridge->func->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_func);
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to remove notify handler\n");
|
|
}
|
|
status = acpi_install_notify_handler(bridge->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_bridge,
|
|
bridge);
|
|
|
|
if (ACPI_FAILURE(status)) {
|
|
err("failed to register interrupt notify handler\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* find acpiphp_func from acpiphp_bridge */
|
|
static struct acpiphp_func *acpiphp_bridge_handle_to_function(acpi_handle handle)
|
|
{
|
|
struct list_head *node, *l;
|
|
struct acpiphp_bridge *bridge;
|
|
struct acpiphp_slot *slot;
|
|
struct acpiphp_func *func;
|
|
|
|
list_for_each(node, &bridge_list) {
|
|
bridge = list_entry(node, struct acpiphp_bridge, list);
|
|
for (slot = bridge->slots; slot; slot = slot->next) {
|
|
list_for_each(l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func,
|
|
sibling);
|
|
if (func->handle == handle)
|
|
return func;
|
|
}
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
|
|
static inline void config_p2p_bridge_flags(struct acpiphp_bridge *bridge)
|
|
{
|
|
acpi_handle dummy_handle;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
|
|
"_STA", &dummy_handle)))
|
|
bridge->flags |= BRIDGE_HAS_STA;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
|
|
"_EJ0", &dummy_handle)))
|
|
bridge->flags |= BRIDGE_HAS_EJ0;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
|
|
"_PS0", &dummy_handle)))
|
|
bridge->flags |= BRIDGE_HAS_PS0;
|
|
|
|
if (ACPI_SUCCESS(acpi_get_handle(bridge->handle,
|
|
"_PS3", &dummy_handle)))
|
|
bridge->flags |= BRIDGE_HAS_PS3;
|
|
|
|
/* is this ejectable p2p bridge? */
|
|
if (bridge->flags & BRIDGE_HAS_EJ0) {
|
|
struct acpiphp_func *func;
|
|
|
|
dbg("found ejectable p2p bridge\n");
|
|
|
|
/* make link between PCI bridge and PCI function */
|
|
func = acpiphp_bridge_handle_to_function(bridge->handle);
|
|
if (!func)
|
|
return;
|
|
bridge->func = func;
|
|
func->bridge = bridge;
|
|
}
|
|
}
|
|
|
|
|
|
/* allocate and initialize host bridge data structure */
|
|
static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
|
|
if (bridge == NULL)
|
|
return;
|
|
|
|
bridge->type = BRIDGE_TYPE_HOST;
|
|
bridge->handle = handle;
|
|
|
|
bridge->pci_bus = pci_bus;
|
|
|
|
spin_lock_init(&bridge->res_lock);
|
|
|
|
init_bridge_misc(bridge);
|
|
}
|
|
|
|
|
|
/* allocate and initialize PCI-to-PCI bridge data structure */
|
|
static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
|
|
if (bridge == NULL) {
|
|
err("out of memory\n");
|
|
return;
|
|
}
|
|
|
|
bridge->type = BRIDGE_TYPE_P2P;
|
|
bridge->handle = handle;
|
|
config_p2p_bridge_flags(bridge);
|
|
|
|
bridge->pci_dev = pci_dev_get(pci_dev);
|
|
bridge->pci_bus = pci_dev->subordinate;
|
|
if (!bridge->pci_bus) {
|
|
err("This is not a PCI-to-PCI bridge!\n");
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Grab a ref to the subordinate PCI bus in case the bus is
|
|
* removed via PCI core logical hotplug. The ref pins the bus
|
|
* (which we access during module unload).
|
|
*/
|
|
get_device(&bridge->pci_bus->dev);
|
|
spin_lock_init(&bridge->res_lock);
|
|
|
|
init_bridge_misc(bridge);
|
|
return;
|
|
err:
|
|
pci_dev_put(pci_dev);
|
|
kfree(bridge);
|
|
return;
|
|
}
|
|
|
|
|
|
/* callback routine to find P2P bridges */
|
|
static acpi_status
|
|
find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle dummy_handle;
|
|
unsigned long long tmp;
|
|
int device, function;
|
|
struct pci_dev *dev;
|
|
struct pci_bus *pci_bus = context;
|
|
|
|
status = acpi_get_handle(handle, "_ADR", &dummy_handle);
|
|
if (ACPI_FAILURE(status))
|
|
return AE_OK; /* continue */
|
|
|
|
status = acpi_evaluate_integer(handle, "_ADR", NULL, &tmp);
|
|
if (ACPI_FAILURE(status)) {
|
|
dbg("%s: _ADR evaluation failure\n", __func__);
|
|
return AE_OK;
|
|
}
|
|
|
|
device = (tmp >> 16) & 0xffff;
|
|
function = tmp & 0xffff;
|
|
|
|
dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
|
|
|
|
if (!dev || !dev->subordinate)
|
|
goto out;
|
|
|
|
/* check if this bridge has ejectable slots */
|
|
if ((detect_ejectable_slots(dev->subordinate) > 0)) {
|
|
dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
|
|
add_p2p_bridge(handle, dev);
|
|
}
|
|
|
|
/* search P2P bridges under this p2p bridge */
|
|
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
|
|
find_p2p_bridge, dev->subordinate, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
|
|
|
|
out:
|
|
pci_dev_put(dev);
|
|
return AE_OK;
|
|
}
|
|
|
|
|
|
/* find hot-pluggable slots, and then find P2P bridge */
|
|
static int add_bridge(acpi_handle handle)
|
|
{
|
|
acpi_status status;
|
|
unsigned long long tmp;
|
|
int seg, bus;
|
|
acpi_handle dummy_handle;
|
|
struct pci_bus *pci_bus;
|
|
|
|
/* if the bridge doesn't have _STA, we assume it is always there */
|
|
status = acpi_get_handle(handle, "_STA", &dummy_handle);
|
|
if (ACPI_SUCCESS(status)) {
|
|
status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp);
|
|
if (ACPI_FAILURE(status)) {
|
|
dbg("%s: _STA evaluation failure\n", __func__);
|
|
return 0;
|
|
}
|
|
if ((tmp & ACPI_STA_FUNCTIONING) == 0)
|
|
/* don't register this object */
|
|
return 0;
|
|
}
|
|
|
|
/* get PCI segment number */
|
|
status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp);
|
|
|
|
seg = ACPI_SUCCESS(status) ? tmp : 0;
|
|
|
|
/* get PCI bus number */
|
|
status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp);
|
|
|
|
if (ACPI_SUCCESS(status)) {
|
|
bus = tmp;
|
|
} else {
|
|
warn("can't get bus number, assuming 0\n");
|
|
bus = 0;
|
|
}
|
|
|
|
pci_bus = pci_find_bus(seg, bus);
|
|
if (!pci_bus) {
|
|
err("Can't find bus %04x:%02x\n", seg, bus);
|
|
return 0;
|
|
}
|
|
|
|
/* check if this bridge has ejectable slots */
|
|
if (detect_ejectable_slots(pci_bus) > 0) {
|
|
dbg("found PCI host-bus bridge with hot-pluggable slots\n");
|
|
add_host_bridge(handle, pci_bus);
|
|
}
|
|
|
|
/* search P2P bridges under this host bridge */
|
|
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
|
|
find_p2p_bridge, pci_bus, NULL);
|
|
|
|
if (ACPI_FAILURE(status))
|
|
warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle)
|
|
{
|
|
struct list_head *head;
|
|
list_for_each(head, &bridge_list) {
|
|
struct acpiphp_bridge *bridge = list_entry(head,
|
|
struct acpiphp_bridge, list);
|
|
if (bridge->handle == handle)
|
|
return bridge;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void cleanup_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
struct list_head *list, *tmp;
|
|
struct acpiphp_slot *slot;
|
|
acpi_status status;
|
|
acpi_handle handle = bridge->handle;
|
|
|
|
status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_bridge);
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to remove notify handler\n");
|
|
|
|
if ((bridge->type != BRIDGE_TYPE_HOST) &&
|
|
((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func)) {
|
|
status = acpi_install_notify_handler(bridge->func->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_func,
|
|
bridge->func);
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to install interrupt notify handler\n");
|
|
}
|
|
|
|
slot = bridge->slots;
|
|
while (slot) {
|
|
struct acpiphp_slot *next = slot->next;
|
|
list_for_each_safe (list, tmp, &slot->funcs) {
|
|
struct acpiphp_func *func;
|
|
func = list_entry(list, struct acpiphp_func, sibling);
|
|
if (is_dock_device(func->handle)) {
|
|
unregister_hotplug_dock_device(func->handle);
|
|
unregister_dock_notifier(&func->nb);
|
|
}
|
|
if (!(func->flags & FUNC_HAS_DCK)) {
|
|
status = acpi_remove_notify_handler(func->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_func);
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to remove notify handler\n");
|
|
}
|
|
list_del(list);
|
|
kfree(func);
|
|
}
|
|
acpiphp_unregister_hotplug_slot(slot);
|
|
list_del(&slot->funcs);
|
|
kfree(slot);
|
|
slot = next;
|
|
}
|
|
|
|
/*
|
|
* Only P2P bridges have a pci_dev
|
|
*/
|
|
if (bridge->pci_dev)
|
|
put_device(&bridge->pci_bus->dev);
|
|
|
|
pci_dev_put(bridge->pci_dev);
|
|
list_del(&bridge->list);
|
|
kfree(bridge);
|
|
}
|
|
|
|
static acpi_status
|
|
cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
/* cleanup p2p bridges under this P2P bridge
|
|
in a depth-first manner */
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
|
|
cleanup_p2p_bridge, NULL, NULL);
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge)
|
|
cleanup_bridge(bridge);
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
static void remove_bridge(acpi_handle handle)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
/* cleanup p2p bridges under this host bridge
|
|
in a depth-first manner */
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
(u32)1, cleanup_p2p_bridge, NULL, NULL);
|
|
|
|
/*
|
|
* On root bridges with hotplug slots directly underneath (ie,
|
|
* no p2p bridge inbetween), we call cleanup_bridge().
|
|
*
|
|
* The else clause cleans up root bridges that either had no
|
|
* hotplug slots at all, or had a p2p bridge underneath.
|
|
*/
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge)
|
|
cleanup_bridge(bridge);
|
|
else
|
|
acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_bridge);
|
|
}
|
|
|
|
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
|
|
{
|
|
struct acpi_pci_id id;
|
|
struct pci_bus *bus;
|
|
struct pci_dev *dev;
|
|
|
|
if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
|
|
return NULL;
|
|
|
|
bus = pci_find_bus(id.segment, id.bus);
|
|
if (!bus)
|
|
return NULL;
|
|
|
|
dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
if ((dev->class != PCI_CLASS_SYSTEM_PIC_IOAPIC) &&
|
|
(dev->class != PCI_CLASS_SYSTEM_PIC_IOXAPIC))
|
|
{
|
|
pci_dev_put(dev);
|
|
return NULL;
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
static int get_gsi_base(acpi_handle handle, u32 *gsi_base)
|
|
{
|
|
acpi_status status;
|
|
int result = -1;
|
|
unsigned long long gsb;
|
|
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
union acpi_object *obj;
|
|
void *table;
|
|
|
|
status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb);
|
|
if (ACPI_SUCCESS(status)) {
|
|
*gsi_base = (u32)gsb;
|
|
return 0;
|
|
}
|
|
|
|
status = acpi_evaluate_object(handle, "_MAT", NULL, &buffer);
|
|
if (ACPI_FAILURE(status) || !buffer.length || !buffer.pointer)
|
|
return -1;
|
|
|
|
obj = buffer.pointer;
|
|
if (obj->type != ACPI_TYPE_BUFFER)
|
|
goto out;
|
|
|
|
table = obj->buffer.pointer;
|
|
switch (((struct acpi_subtable_header *)table)->type) {
|
|
case ACPI_MADT_TYPE_IO_SAPIC:
|
|
*gsi_base = ((struct acpi_madt_io_sapic *)table)->global_irq_base;
|
|
result = 0;
|
|
break;
|
|
case ACPI_MADT_TYPE_IO_APIC:
|
|
*gsi_base = ((struct acpi_madt_io_apic *)table)->global_irq_base;
|
|
result = 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
out:
|
|
kfree(buffer.pointer);
|
|
return result;
|
|
}
|
|
|
|
static acpi_status
|
|
ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
acpi_status status;
|
|
unsigned long long sta;
|
|
acpi_handle tmp;
|
|
struct pci_dev *pdev;
|
|
u32 gsi_base;
|
|
u64 phys_addr;
|
|
struct acpiphp_ioapic *ioapic;
|
|
|
|
/* Evaluate _STA if present */
|
|
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
|
|
if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL)
|
|
return AE_CTRL_DEPTH;
|
|
|
|
/* Scan only PCI bus scope */
|
|
status = acpi_get_handle(handle, "_HID", &tmp);
|
|
if (ACPI_SUCCESS(status))
|
|
return AE_CTRL_DEPTH;
|
|
|
|
if (get_gsi_base(handle, &gsi_base))
|
|
return AE_OK;
|
|
|
|
ioapic = kmalloc(sizeof(*ioapic), GFP_KERNEL);
|
|
if (!ioapic)
|
|
return AE_NO_MEMORY;
|
|
|
|
pdev = get_apic_pci_info(handle);
|
|
if (!pdev)
|
|
goto exit_kfree;
|
|
|
|
if (pci_enable_device(pdev))
|
|
goto exit_pci_dev_put;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)"))
|
|
goto exit_pci_disable_device;
|
|
|
|
phys_addr = pci_resource_start(pdev, 0);
|
|
if (acpi_register_ioapic(handle, phys_addr, gsi_base))
|
|
goto exit_pci_release_region;
|
|
|
|
ioapic->gsi_base = gsi_base;
|
|
ioapic->dev = pdev;
|
|
spin_lock(&ioapic_list_lock);
|
|
list_add_tail(&ioapic->list, &ioapic_list);
|
|
spin_unlock(&ioapic_list_lock);
|
|
|
|
return AE_OK;
|
|
|
|
exit_pci_release_region:
|
|
pci_release_region(pdev, 0);
|
|
exit_pci_disable_device:
|
|
pci_disable_device(pdev);
|
|
exit_pci_dev_put:
|
|
pci_dev_put(pdev);
|
|
exit_kfree:
|
|
kfree(ioapic);
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status
|
|
ioapic_remove(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
acpi_status status;
|
|
unsigned long long sta;
|
|
acpi_handle tmp;
|
|
u32 gsi_base;
|
|
struct acpiphp_ioapic *pos, *n, *ioapic = NULL;
|
|
|
|
/* Evaluate _STA if present */
|
|
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
|
|
if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL)
|
|
return AE_CTRL_DEPTH;
|
|
|
|
/* Scan only PCI bus scope */
|
|
status = acpi_get_handle(handle, "_HID", &tmp);
|
|
if (ACPI_SUCCESS(status))
|
|
return AE_CTRL_DEPTH;
|
|
|
|
if (get_gsi_base(handle, &gsi_base))
|
|
return AE_OK;
|
|
|
|
acpi_unregister_ioapic(handle, gsi_base);
|
|
|
|
spin_lock(&ioapic_list_lock);
|
|
list_for_each_entry_safe(pos, n, &ioapic_list, list) {
|
|
if (pos->gsi_base != gsi_base)
|
|
continue;
|
|
ioapic = pos;
|
|
list_del(&ioapic->list);
|
|
break;
|
|
}
|
|
spin_unlock(&ioapic_list_lock);
|
|
|
|
if (!ioapic)
|
|
return AE_OK;
|
|
|
|
pci_release_region(ioapic->dev, 0);
|
|
pci_disable_device(ioapic->dev);
|
|
pci_dev_put(ioapic->dev);
|
|
kfree(ioapic);
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
static int acpiphp_configure_ioapics(acpi_handle handle)
|
|
{
|
|
ioapic_add(handle, 0, NULL, NULL);
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
ACPI_UINT32_MAX, ioapic_add, NULL, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static int acpiphp_unconfigure_ioapics(acpi_handle handle)
|
|
{
|
|
ioapic_remove(handle, 0, NULL, NULL);
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
ACPI_UINT32_MAX, ioapic_remove, NULL, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static int power_on_slot(struct acpiphp_slot *slot)
|
|
{
|
|
acpi_status status;
|
|
struct acpiphp_func *func;
|
|
struct list_head *l;
|
|
int retval = 0;
|
|
|
|
/* if already enabled, just skip */
|
|
if (slot->flags & SLOT_POWEREDON)
|
|
goto err_exit;
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
|
|
if (func->flags & FUNC_HAS_PS0) {
|
|
dbg("%s: executing _PS0\n", __func__);
|
|
status = acpi_evaluate_object(func->handle, "_PS0", NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
warn("%s: _PS0 failed\n", __func__);
|
|
retval = -1;
|
|
goto err_exit;
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TBD: evaluate _STA to check if the slot is enabled */
|
|
|
|
slot->flags |= SLOT_POWEREDON;
|
|
|
|
err_exit:
|
|
return retval;
|
|
}
|
|
|
|
|
|
static int power_off_slot(struct acpiphp_slot *slot)
|
|
{
|
|
acpi_status status;
|
|
struct acpiphp_func *func;
|
|
struct list_head *l;
|
|
|
|
int retval = 0;
|
|
|
|
/* if already disabled, just skip */
|
|
if ((slot->flags & SLOT_POWEREDON) == 0)
|
|
goto err_exit;
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
|
|
if (func->flags & FUNC_HAS_PS3) {
|
|
status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
warn("%s: _PS3 failed\n", __func__);
|
|
retval = -1;
|
|
goto err_exit;
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TBD: evaluate _STA to check if the slot is disabled */
|
|
|
|
slot->flags &= (~SLOT_POWEREDON);
|
|
|
|
err_exit:
|
|
return retval;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* acpiphp_max_busnr - return the highest reserved bus number under the given bus.
|
|
* @bus: bus to start search with
|
|
*/
|
|
static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
|
|
{
|
|
struct list_head *tmp;
|
|
unsigned char max, n;
|
|
|
|
/*
|
|
* pci_bus_max_busnr will return the highest
|
|
* reserved busnr for all these children.
|
|
* that is equivalent to the bus->subordinate
|
|
* value. We don't want to use the parent's
|
|
* bus->subordinate value because it could have
|
|
* padding in it.
|
|
*/
|
|
max = bus->secondary;
|
|
|
|
list_for_each(tmp, &bus->children) {
|
|
n = pci_bus_max_busnr(pci_bus_b(tmp));
|
|
if (n > max)
|
|
max = n;
|
|
}
|
|
return max;
|
|
}
|
|
|
|
|
|
/**
|
|
* acpiphp_bus_add - add a new bus to acpi subsystem
|
|
* @func: acpiphp_func of the bridge
|
|
*/
|
|
static int acpiphp_bus_add(struct acpiphp_func *func)
|
|
{
|
|
acpi_handle phandle;
|
|
struct acpi_device *device, *pdevice;
|
|
int ret_val;
|
|
|
|
acpi_get_parent(func->handle, &phandle);
|
|
if (acpi_bus_get_device(phandle, &pdevice)) {
|
|
dbg("no parent device, assuming NULL\n");
|
|
pdevice = NULL;
|
|
}
|
|
if (!acpi_bus_get_device(func->handle, &device)) {
|
|
dbg("bus exists... trim\n");
|
|
/* this shouldn't be in here, so remove
|
|
* the bus then re-add it...
|
|
*/
|
|
ret_val = acpi_bus_trim(device, 1);
|
|
dbg("acpi_bus_trim return %x\n", ret_val);
|
|
}
|
|
|
|
ret_val = acpi_bus_add(&device, pdevice, func->handle,
|
|
ACPI_BUS_TYPE_DEVICE);
|
|
if (ret_val) {
|
|
dbg("error adding bus, %x\n",
|
|
-ret_val);
|
|
goto acpiphp_bus_add_out;
|
|
}
|
|
/*
|
|
* try to start anyway. We could have failed to add
|
|
* simply because this bus had previously been added
|
|
* on another add. Don't bother with the return value
|
|
* we just keep going.
|
|
*/
|
|
ret_val = acpi_bus_start(device);
|
|
|
|
acpiphp_bus_add_out:
|
|
return ret_val;
|
|
}
|
|
|
|
|
|
/**
|
|
* acpiphp_bus_trim - trim a bus from acpi subsystem
|
|
* @handle: handle to acpi namespace
|
|
*/
|
|
static int acpiphp_bus_trim(acpi_handle handle)
|
|
{
|
|
struct acpi_device *device;
|
|
int retval;
|
|
|
|
retval = acpi_bus_get_device(handle, &device);
|
|
if (retval) {
|
|
dbg("acpi_device not found\n");
|
|
return retval;
|
|
}
|
|
|
|
retval = acpi_bus_trim(device, 1);
|
|
if (retval)
|
|
err("cannot remove from acpi list\n");
|
|
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* enable_device - enable, configure a slot
|
|
* @slot: slot to be enabled
|
|
*
|
|
* This function should be called per *physical slot*,
|
|
* not per each slot object in ACPI namespace.
|
|
*/
|
|
static int __ref enable_device(struct acpiphp_slot *slot)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus = slot->bridge->pci_bus;
|
|
struct list_head *l;
|
|
struct acpiphp_func *func;
|
|
int retval = 0;
|
|
int num, max, pass;
|
|
acpi_status status;
|
|
|
|
if (slot->flags & SLOT_ENABLED)
|
|
goto err_exit;
|
|
|
|
/* sanity check: dev should be NULL when hot-plugged in */
|
|
dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
|
|
if (dev) {
|
|
/* This case shouldn't happen */
|
|
err("pci_dev structure already exists.\n");
|
|
pci_dev_put(dev);
|
|
retval = -1;
|
|
goto err_exit;
|
|
}
|
|
|
|
num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
|
|
if (num == 0) {
|
|
err("No new device found\n");
|
|
retval = -1;
|
|
goto err_exit;
|
|
}
|
|
|
|
max = acpiphp_max_busnr(bus);
|
|
for (pass = 0; pass < 2; pass++) {
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (PCI_SLOT(dev->devfn) != slot->device)
|
|
continue;
|
|
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
|
|
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
|
|
max = pci_scan_bridge(bus, dev, max, pass);
|
|
if (pass && dev->subordinate)
|
|
pci_bus_size_bridges(dev->subordinate);
|
|
}
|
|
}
|
|
}
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
acpiphp_bus_add(func);
|
|
}
|
|
|
|
pci_bus_assign_resources(bus);
|
|
acpiphp_sanitize_bus(bus);
|
|
acpiphp_set_hpp_values(slot->bridge->handle, bus);
|
|
list_for_each_entry(func, &slot->funcs, sibling)
|
|
acpiphp_configure_ioapics(func->handle);
|
|
pci_enable_bridges(bus);
|
|
pci_bus_add_devices(bus);
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
|
|
func->function));
|
|
if (!dev)
|
|
continue;
|
|
|
|
if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
|
|
dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
|
|
pci_dev_put(dev);
|
|
continue;
|
|
}
|
|
|
|
status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
warn("find_p2p_bridge failed (error code = 0x%x)\n",
|
|
status);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
slot->flags |= SLOT_ENABLED;
|
|
|
|
err_exit:
|
|
return retval;
|
|
}
|
|
|
|
static void disable_bridges(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (dev->subordinate) {
|
|
disable_bridges(dev->subordinate);
|
|
pci_disable_device(dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* disable_device - disable a slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
static int disable_device(struct acpiphp_slot *slot)
|
|
{
|
|
struct acpiphp_func *func;
|
|
struct pci_dev *pdev;
|
|
|
|
/* is this slot already disabled? */
|
|
if (!(slot->flags & SLOT_ENABLED))
|
|
goto err_exit;
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
if (func->bridge) {
|
|
/* cleanup p2p bridges under this P2P bridge */
|
|
cleanup_p2p_bridge(func->bridge->handle,
|
|
(u32)1, NULL, NULL);
|
|
func->bridge = NULL;
|
|
}
|
|
|
|
pdev = pci_get_slot(slot->bridge->pci_bus,
|
|
PCI_DEVFN(slot->device, func->function));
|
|
if (pdev) {
|
|
pci_stop_bus_device(pdev);
|
|
if (pdev->subordinate) {
|
|
disable_bridges(pdev->subordinate);
|
|
pci_disable_device(pdev);
|
|
}
|
|
pci_remove_bus_device(pdev);
|
|
pci_dev_put(pdev);
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
acpiphp_unconfigure_ioapics(func->handle);
|
|
acpiphp_bus_trim(func->handle);
|
|
}
|
|
|
|
slot->flags &= (~SLOT_ENABLED);
|
|
|
|
err_exit:
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* get_slot_status - get ACPI slot status
|
|
* @slot: ACPI PHP slot
|
|
*
|
|
* If a slot has _STA for each function and if any one of them
|
|
* returned non-zero status, return it.
|
|
*
|
|
* If a slot doesn't have _STA and if any one of its functions'
|
|
* configuration space is configured, return 0x0f as a _STA.
|
|
*
|
|
* Otherwise return 0.
|
|
*/
|
|
static unsigned int get_slot_status(struct acpiphp_slot *slot)
|
|
{
|
|
acpi_status status;
|
|
unsigned long long sta = 0;
|
|
u32 dvid;
|
|
struct list_head *l;
|
|
struct acpiphp_func *func;
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
|
|
if (func->flags & FUNC_HAS_STA) {
|
|
status = acpi_evaluate_integer(func->handle, "_STA", NULL, &sta);
|
|
if (ACPI_SUCCESS(status) && sta)
|
|
break;
|
|
} else {
|
|
pci_bus_read_config_dword(slot->bridge->pci_bus,
|
|
PCI_DEVFN(slot->device,
|
|
func->function),
|
|
PCI_VENDOR_ID, &dvid);
|
|
if (dvid != 0xffffffff) {
|
|
sta = ACPI_STA_ALL;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (unsigned int)sta;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_eject_slot - physically eject the slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
int acpiphp_eject_slot(struct acpiphp_slot *slot)
|
|
{
|
|
acpi_status status;
|
|
struct acpiphp_func *func;
|
|
struct list_head *l;
|
|
struct acpi_object_list arg_list;
|
|
union acpi_object arg;
|
|
|
|
list_for_each (l, &slot->funcs) {
|
|
func = list_entry(l, struct acpiphp_func, sibling);
|
|
|
|
/* We don't want to call _EJ0 on non-existing functions. */
|
|
if ((func->flags & FUNC_HAS_EJ0)) {
|
|
/* _EJ0 method take one argument */
|
|
arg_list.count = 1;
|
|
arg_list.pointer = &arg;
|
|
arg.type = ACPI_TYPE_INTEGER;
|
|
arg.integer.value = 1;
|
|
|
|
status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
warn("%s: _EJ0 failed\n", __func__);
|
|
return -1;
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_check_bridge - re-enumerate devices
|
|
* @bridge: where to begin re-enumeration
|
|
*
|
|
* Iterate over all slots under this bridge and make sure that if a
|
|
* card is present they are enabled, and if not they are disabled.
|
|
*/
|
|
static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
struct acpiphp_slot *slot;
|
|
int retval = 0;
|
|
int enabled, disabled;
|
|
|
|
enabled = disabled = 0;
|
|
|
|
for (slot = bridge->slots; slot; slot = slot->next) {
|
|
unsigned int status = get_slot_status(slot);
|
|
if (slot->flags & SLOT_ENABLED) {
|
|
if (status == ACPI_STA_ALL)
|
|
continue;
|
|
retval = acpiphp_disable_slot(slot);
|
|
if (retval) {
|
|
err("Error occurred in disabling\n");
|
|
goto err_exit;
|
|
} else {
|
|
acpiphp_eject_slot(slot);
|
|
}
|
|
disabled++;
|
|
} else {
|
|
if (status != ACPI_STA_ALL)
|
|
continue;
|
|
retval = acpiphp_enable_slot(slot);
|
|
if (retval) {
|
|
err("Error occurred in enabling\n");
|
|
goto err_exit;
|
|
}
|
|
enabled++;
|
|
}
|
|
}
|
|
|
|
dbg("%s: %d enabled, %d disabled\n", __func__, enabled, disabled);
|
|
|
|
err_exit:
|
|
return retval;
|
|
}
|
|
|
|
static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
|
|
{
|
|
u16 pci_cmd, pci_bctl;
|
|
struct pci_dev *cdev;
|
|
|
|
/* Program hpp values for this device */
|
|
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
|
|
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
|
|
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
|
|
return;
|
|
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
|
|
return;
|
|
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
|
|
bridge->hpp.t0->cache_line_size);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
|
|
bridge->hpp.t0->latency_timer);
|
|
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
|
|
if (bridge->hpp.t0->enable_serr)
|
|
pci_cmd |= PCI_COMMAND_SERR;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_SERR;
|
|
if (bridge->hpp.t0->enable_perr)
|
|
pci_cmd |= PCI_COMMAND_PARITY;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_PARITY;
|
|
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
|
|
|
|
/* Program bridge control value and child devices */
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
|
|
bridge->hpp.t0->latency_timer);
|
|
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
|
|
if (bridge->hpp.t0->enable_serr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_SERR;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
|
|
if (bridge->hpp.t0->enable_perr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
|
|
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
|
|
if (dev->subordinate) {
|
|
list_for_each_entry(cdev, &dev->subordinate->devices,
|
|
bus_list)
|
|
program_hpp(cdev, bridge);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
|
|
{
|
|
struct acpiphp_bridge bridge;
|
|
struct pci_dev *dev;
|
|
|
|
memset(&bridge, 0, sizeof(bridge));
|
|
bridge.handle = handle;
|
|
bridge.pci_bus = bus;
|
|
bridge.pci_dev = bus->self;
|
|
decode_hpp(&bridge);
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
program_hpp(dev, &bridge);
|
|
|
|
}
|
|
|
|
/*
|
|
* Remove devices for which we could not assign resources, call
|
|
* arch specific code to fix-up the bus
|
|
*/
|
|
static void acpiphp_sanitize_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
int i;
|
|
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
|
|
struct resource *res = &dev->resource[i];
|
|
if ((res->flags & type_mask) && !res->start &&
|
|
res->end) {
|
|
/* Could not assign a required resources
|
|
* for this device, remove it */
|
|
pci_remove_bus_device(dev);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Program resources in newly inserted bridge */
|
|
static int acpiphp_configure_bridge (acpi_handle handle)
|
|
{
|
|
struct acpi_pci_id pci_id;
|
|
struct pci_bus *bus;
|
|
|
|
if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
|
|
err("cannot get PCI domain and bus number for bridge\n");
|
|
return -EINVAL;
|
|
}
|
|
bus = pci_find_bus(pci_id.segment, pci_id.bus);
|
|
if (!bus) {
|
|
err("cannot find bus %d:%d\n",
|
|
pci_id.segment, pci_id.bus);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pci_bus_size_bridges(bus);
|
|
pci_bus_assign_resources(bus);
|
|
acpiphp_sanitize_bus(bus);
|
|
acpiphp_set_hpp_values(handle, bus);
|
|
pci_enable_bridges(bus);
|
|
acpiphp_configure_ioapics(handle);
|
|
return 0;
|
|
}
|
|
|
|
static void handle_bridge_insertion(acpi_handle handle, u32 type)
|
|
{
|
|
struct acpi_device *device, *pdevice;
|
|
acpi_handle phandle;
|
|
|
|
if ((type != ACPI_NOTIFY_BUS_CHECK) &&
|
|
(type != ACPI_NOTIFY_DEVICE_CHECK)) {
|
|
err("unexpected notification type %d\n", type);
|
|
return;
|
|
}
|
|
|
|
acpi_get_parent(handle, &phandle);
|
|
if (acpi_bus_get_device(phandle, &pdevice)) {
|
|
dbg("no parent device, assuming NULL\n");
|
|
pdevice = NULL;
|
|
}
|
|
if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) {
|
|
err("cannot add bridge to acpi list\n");
|
|
return;
|
|
}
|
|
if (!acpiphp_configure_bridge(handle) &&
|
|
!acpi_bus_start(device))
|
|
add_bridge(handle);
|
|
else
|
|
err("cannot configure and start bridge\n");
|
|
|
|
}
|
|
|
|
/*
|
|
* ACPI event handlers
|
|
*/
|
|
|
|
static acpi_status
|
|
count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
int *count = (int *)context;
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge)
|
|
(*count)++;
|
|
return AE_OK ;
|
|
}
|
|
|
|
static acpi_status
|
|
check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
char objname[64];
|
|
struct acpi_buffer buffer = { .length = sizeof(objname),
|
|
.pointer = objname };
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge) {
|
|
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
|
|
dbg("%s: re-enumerating slots under %s\n",
|
|
__func__, objname);
|
|
acpiphp_check_bridge(bridge);
|
|
}
|
|
return AE_OK ;
|
|
}
|
|
|
|
/**
|
|
* handle_hotplug_event_bridge - handle ACPI event on bridges
|
|
* @handle: Notify()'ed acpi_handle
|
|
* @type: Notify code
|
|
* @context: pointer to acpiphp_bridge structure
|
|
*
|
|
* Handles ACPI event notification on {host,p2p} bridges.
|
|
*/
|
|
static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
char objname[64];
|
|
struct acpi_buffer buffer = { .length = sizeof(objname),
|
|
.pointer = objname };
|
|
struct acpi_device *device;
|
|
int num_sub_bridges = 0;
|
|
|
|
if (acpi_bus_get_device(handle, &device)) {
|
|
/* This bridge must have just been physically inserted */
|
|
handle_bridge_insertion(handle, type);
|
|
return;
|
|
}
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (type == ACPI_NOTIFY_BUS_CHECK) {
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
|
|
count_sub_bridges, &num_sub_bridges, NULL);
|
|
}
|
|
|
|
if (!bridge && !num_sub_bridges) {
|
|
err("cannot get bridge info\n");
|
|
return;
|
|
}
|
|
|
|
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
|
|
|
|
switch (type) {
|
|
case ACPI_NOTIFY_BUS_CHECK:
|
|
/* bus re-enumerate */
|
|
dbg("%s: Bus check notify on %s\n", __func__, objname);
|
|
if (bridge) {
|
|
dbg("%s: re-enumerating slots under %s\n",
|
|
__func__, objname);
|
|
acpiphp_check_bridge(bridge);
|
|
}
|
|
if (num_sub_bridges)
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_CHECK:
|
|
/* device check */
|
|
dbg("%s: Device check notify on %s\n", __func__, objname);
|
|
acpiphp_check_bridge(bridge);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_WAKE:
|
|
/* wake event */
|
|
dbg("%s: Device wake notify on %s\n", __func__, objname);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_EJECT_REQUEST:
|
|
/* request device eject */
|
|
dbg("%s: Device eject notify on %s\n", __func__, objname);
|
|
if ((bridge->type != BRIDGE_TYPE_HOST) &&
|
|
(bridge->flags & BRIDGE_HAS_EJ0)) {
|
|
struct acpiphp_slot *slot;
|
|
slot = bridge->func->slot;
|
|
if (!acpiphp_disable_slot(slot))
|
|
acpiphp_eject_slot(slot);
|
|
}
|
|
break;
|
|
|
|
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
|
|
printk(KERN_ERR "Device %s cannot be configured due"
|
|
" to a frequency mismatch\n", objname);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
|
|
printk(KERN_ERR "Device %s cannot be configured due"
|
|
" to a bus mode mismatch\n", objname);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_POWER_FAULT:
|
|
printk(KERN_ERR "Device %s has suffered a power fault\n",
|
|
objname);
|
|
break;
|
|
|
|
default:
|
|
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
|
|
* @handle: Notify()'ed acpi_handle
|
|
* @type: Notify code
|
|
* @context: pointer to acpiphp_func structure
|
|
*
|
|
* Handles ACPI event notification on slots.
|
|
*/
|
|
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
|
|
{
|
|
struct acpiphp_func *func;
|
|
char objname[64];
|
|
struct acpi_buffer buffer = { .length = sizeof(objname),
|
|
.pointer = objname };
|
|
|
|
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
|
|
|
|
func = (struct acpiphp_func *)context;
|
|
|
|
switch (type) {
|
|
case ACPI_NOTIFY_BUS_CHECK:
|
|
/* bus re-enumerate */
|
|
dbg("%s: Bus check notify on %s\n", __func__, objname);
|
|
acpiphp_enable_slot(func->slot);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_CHECK:
|
|
/* device check : re-enumerate from parent bus */
|
|
dbg("%s: Device check notify on %s\n", __func__, objname);
|
|
acpiphp_check_bridge(func->slot->bridge);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_WAKE:
|
|
/* wake event */
|
|
dbg("%s: Device wake notify on %s\n", __func__, objname);
|
|
break;
|
|
|
|
case ACPI_NOTIFY_EJECT_REQUEST:
|
|
/* request device eject */
|
|
dbg("%s: Device eject notify on %s\n", __func__, objname);
|
|
if (!(acpiphp_disable_slot(func->slot)))
|
|
acpiphp_eject_slot(func->slot);
|
|
break;
|
|
|
|
default:
|
|
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static acpi_status
|
|
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
int *count = (int *)context;
|
|
|
|
if (acpi_root_bridge(handle)) {
|
|
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event_bridge, NULL);
|
|
(*count)++;
|
|
}
|
|
return AE_OK ;
|
|
}
|
|
|
|
static struct acpi_pci_driver acpi_pci_hp_driver = {
|
|
.add = add_bridge,
|
|
.remove = remove_bridge,
|
|
};
|
|
|
|
/**
|
|
* acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures
|
|
*/
|
|
int __init acpiphp_glue_init(void)
|
|
{
|
|
int num = 0;
|
|
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
|
|
ACPI_UINT32_MAX, find_root_bridges, &num, NULL);
|
|
|
|
if (num <= 0)
|
|
return -1;
|
|
else
|
|
acpi_pci_register_driver(&acpi_pci_hp_driver);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures
|
|
*
|
|
* This function frees all data allocated in acpiphp_glue_init().
|
|
*/
|
|
void acpiphp_glue_exit(void)
|
|
{
|
|
acpi_pci_unregister_driver(&acpi_pci_hp_driver);
|
|
}
|
|
|
|
|
|
/**
|
|
* acpiphp_get_num_slots - count number of slots in a system
|
|
*/
|
|
int __init acpiphp_get_num_slots(void)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
int num_slots = 0;
|
|
|
|
list_for_each_entry (bridge, &bridge_list, list) {
|
|
dbg("Bus %04x:%02x has %d slot%s\n",
|
|
pci_domain_nr(bridge->pci_bus),
|
|
bridge->pci_bus->number, bridge->nr_slots,
|
|
bridge->nr_slots == 1 ? "" : "s");
|
|
num_slots += bridge->nr_slots;
|
|
}
|
|
|
|
dbg("Total %d slots\n", num_slots);
|
|
return num_slots;
|
|
}
|
|
|
|
|
|
#if 0
|
|
/**
|
|
* acpiphp_for_each_slot - call function for each slot
|
|
* @fn: callback function
|
|
* @data: context to be passed to callback function
|
|
*/
|
|
static int acpiphp_for_each_slot(acpiphp_callback fn, void *data)
|
|
{
|
|
struct list_head *node;
|
|
struct acpiphp_bridge *bridge;
|
|
struct acpiphp_slot *slot;
|
|
int retval = 0;
|
|
|
|
list_for_each (node, &bridge_list) {
|
|
bridge = (struct acpiphp_bridge *)node;
|
|
for (slot = bridge->slots; slot; slot = slot->next) {
|
|
retval = fn(slot, data);
|
|
if (!retval)
|
|
goto err_exit;
|
|
}
|
|
}
|
|
|
|
err_exit:
|
|
return retval;
|
|
}
|
|
#endif
|
|
|
|
|
|
/**
|
|
* acpiphp_enable_slot - power on slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
int acpiphp_enable_slot(struct acpiphp_slot *slot)
|
|
{
|
|
int retval;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
|
|
/* wake up all functions */
|
|
retval = power_on_slot(slot);
|
|
if (retval)
|
|
goto err_exit;
|
|
|
|
if (get_slot_status(slot) == ACPI_STA_ALL) {
|
|
/* configure all functions */
|
|
retval = enable_device(slot);
|
|
if (retval)
|
|
power_off_slot(slot);
|
|
} else {
|
|
dbg("%s: Slot status is not ACPI_STA_ALL\n", __func__);
|
|
power_off_slot(slot);
|
|
}
|
|
|
|
err_exit:
|
|
mutex_unlock(&slot->crit_sect);
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_disable_slot - power off slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
int acpiphp_disable_slot(struct acpiphp_slot *slot)
|
|
{
|
|
int retval = 0;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
|
|
/* unconfigure all functions */
|
|
retval = disable_device(slot);
|
|
if (retval)
|
|
goto err_exit;
|
|
|
|
/* power off all functions */
|
|
retval = power_off_slot(slot);
|
|
if (retval)
|
|
goto err_exit;
|
|
|
|
err_exit:
|
|
mutex_unlock(&slot->crit_sect);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* slot enabled: 1
|
|
* slot disabled: 0
|
|
*/
|
|
u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
|
|
{
|
|
return (slot->flags & SLOT_POWEREDON);
|
|
}
|
|
|
|
|
|
/*
|
|
* latch open: 1
|
|
* latch closed: 0
|
|
*/
|
|
u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
|
|
{
|
|
unsigned int sta;
|
|
|
|
sta = get_slot_status(slot);
|
|
|
|
return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* adapter presence : 1
|
|
* absence : 0
|
|
*/
|
|
u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot)
|
|
{
|
|
unsigned int sta;
|
|
|
|
sta = get_slot_status(slot);
|
|
|
|
return (sta == 0) ? 0 : 1;
|
|
}
|