878ba61aa9
New and updated SoC support. Also included are some cleanups where the
platform maintainers hadn't separated cleanups from new developent in
separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might start
combining the cleanup and new-development branches more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=szd9
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Also included are some cleanups where
the platform maintainers hadn't separated cleanups from new developent
in separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might
start combining the cleanup and new-development branches more"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
ARM: at91/trivial: unify functions and machine names
ARM: at91: remove at91_dt_initialize and machine init_early()
ARM: at91: change board files into SoC files
ARM: at91: remove at91_boot_soc
ARM: at91: move alternative initial mapping to board-dt-sama5.c
ARM: at91: merge all SOC_AT91SAM9xxx
ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
ARM: digicolor: select syscon and timer
ARM: zynq: Simplify SLCR initialization
ARM: zynq: PM: Fixed simple typo.
ARM: zynq: Setup default gpio number for Xilinx Zynq
ARM: digicolor: add low level debug support
ARM: initial support for Conexant Digicolor CX92755 SoC
ARM: OMAP2+: Add dm816x hwmod support
ARM: OMAP2+: Add clock domain support for dm816x
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
ARM: at91: remove unused mach/system_rev.h
ARM: at91: stop using HAVE_AT91_DBGUx
ARM: at91: fix ordering of SRAM and PM initialization
...
1668 lines
55 KiB
Text
1668 lines
55 KiB
Text
menu "Kernel hacking"
|
|
|
|
source "lib/Kconfig.debug"
|
|
|
|
config ARM_PTDUMP
|
|
bool "Export kernel pagetable layout to userspace via debugfs"
|
|
depends on DEBUG_KERNEL
|
|
select DEBUG_FS
|
|
---help---
|
|
Say Y here if you want to show the kernel pagetable layout in a
|
|
debugfs file. This information is only useful for kernel developers
|
|
who are working in architecture specific areas of the kernel.
|
|
It is probably not a good idea to enable this feature in a production
|
|
kernel.
|
|
If in doubt, say "N"
|
|
|
|
config STRICT_DEVMEM
|
|
bool "Filter access to /dev/mem"
|
|
depends on MMU
|
|
---help---
|
|
If this option is disabled, you allow userspace (root) access to all
|
|
of memory, including kernel and userspace memory. Accidental
|
|
access to this is obviously disastrous, but specific access can
|
|
be used by people debugging the kernel.
|
|
|
|
If this option is switched on, the /dev/mem file only allows
|
|
userspace access to memory mapped peripherals.
|
|
|
|
If in doubt, say Y.
|
|
|
|
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
|
|
# If you know what you are doing and are willing to live without stack
|
|
# traces, you can get a slightly smaller kernel by setting this option to
|
|
# n, but then RMK will have to kill you ;).
|
|
config FRAME_POINTER
|
|
bool
|
|
depends on !THUMB2_KERNEL
|
|
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
|
|
help
|
|
If you say N here, the resulting kernel will be slightly smaller and
|
|
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
|
|
when a problem occurs with the kernel, the information that is
|
|
reported is severely limited.
|
|
|
|
config ARM_UNWIND
|
|
bool "Enable stack unwinding support (EXPERIMENTAL)"
|
|
depends on AEABI
|
|
default y
|
|
help
|
|
This option enables stack unwinding support in the kernel
|
|
using the information automatically generated by the
|
|
compiler. The resulting kernel image is slightly bigger but
|
|
the performance is not affected. Currently, this feature
|
|
only works with EABI compilers. If unsure say Y.
|
|
|
|
config OLD_MCOUNT
|
|
bool
|
|
depends on FUNCTION_TRACER && FRAME_POINTER
|
|
default y
|
|
|
|
config DEBUG_USER
|
|
bool "Verbose user fault messages"
|
|
help
|
|
When a user program crashes due to an exception, the kernel can
|
|
print a brief message explaining what the problem was. This is
|
|
sometimes helpful for debugging but serves no purpose on a
|
|
production system. Most people should say N here.
|
|
|
|
In addition, you need to pass user_debug=N on the kernel command
|
|
line to enable this feature. N consists of the sum of:
|
|
|
|
1 - undefined instruction events
|
|
2 - system calls
|
|
4 - invalid data aborts
|
|
8 - SIGSEGV faults
|
|
16 - SIGBUS faults
|
|
|
|
# These options are only for real kernel hackers who want to get their hands dirty.
|
|
config DEBUG_LL
|
|
bool "Kernel low-level debugging functions (read help!)"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to include definitions of printascii, printch, printhex
|
|
in the kernel. This is helpful if you are debugging code that
|
|
executes before the console is initialized.
|
|
|
|
Note that selecting this option will limit the kernel to a single
|
|
UART definition, as specified below. Attempting to boot the kernel
|
|
image on a different platform *will not work*, so this option should
|
|
not be enabled for kernels that are intended to be portable.
|
|
|
|
choice
|
|
prompt "Kernel low-level debugging port"
|
|
depends on DEBUG_LL
|
|
|
|
config DEBUG_ASM9260_UART
|
|
bool "Kernel low-level debugging via asm9260 UART"
|
|
depends on MACH_ASM9260
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to an UART or USART port on asm9260 based
|
|
machines.
|
|
|
|
DEBUG_UART_PHYS | DEBUG_UART_VIRT
|
|
|
|
0x80000000 | 0xf0000000 | UART0
|
|
0x80004000 | 0xf0004000 | UART1
|
|
0x80008000 | 0xf0008000 | UART2
|
|
0x8000c000 | 0xf000c000 | UART3
|
|
0x80010000 | 0xf0010000 | UART4
|
|
0x80014000 | 0xf0014000 | UART5
|
|
0x80018000 | 0xf0018000 | UART6
|
|
0x8001c000 | 0xf001c000 | UART7
|
|
0x80020000 | 0xf0020000 | UART8
|
|
0x80024000 | 0xf0024000 | UART9
|
|
|
|
config AT91_DEBUG_LL_DBGU0
|
|
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
|
|
select DEBUG_AT91_UART
|
|
depends on ARCH_AT91
|
|
depends on SOC_AT91RM9200 || SOC_AT91SAM9
|
|
|
|
config AT91_DEBUG_LL_DBGU1
|
|
bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
|
|
select DEBUG_AT91_UART
|
|
depends on ARCH_AT91
|
|
depends on SOC_AT91SAM9 || SOC_SAMA5
|
|
|
|
config AT91_DEBUG_LL_DBGU2
|
|
bool "Kernel low-level debugging on sama5d4"
|
|
select DEBUG_AT91_UART
|
|
depends on ARCH_AT91
|
|
depends on SOC_SAMA5
|
|
|
|
config DEBUG_BCM2835
|
|
bool "Kernel low-level debugging on BCM2835 PL011 UART"
|
|
depends on ARCH_BCM2835
|
|
select DEBUG_UART_PL01X
|
|
|
|
config DEBUG_BCM_5301X
|
|
bool "Kernel low-level debugging on BCM5301X UART1"
|
|
depends on ARCH_BCM_5301X
|
|
select DEBUG_UART_8250
|
|
|
|
config DEBUG_BCM_KONA_UART
|
|
bool "Kernel low-level debugging messages via BCM KONA UART"
|
|
depends on ARCH_BCM_MOBILE
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Broadcom SoC platforms.
|
|
This low level debug works for Broadcom
|
|
mobile SoCs in the Kona family of chips (e.g. bcm28155,
|
|
bcm11351, etc...)
|
|
|
|
config DEBUG_BCM63XX
|
|
bool "Kernel low-level debugging on BCM63XX UART"
|
|
depends on ARCH_BCM_63XX
|
|
select DEBUG_UART_BCM63XX
|
|
|
|
config DEBUG_BERLIN_UART
|
|
bool "Marvell Berlin SoC Debug UART"
|
|
depends on ARCH_BERLIN
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Marvell Berlin SoC based platforms.
|
|
|
|
config DEBUG_BRCMSTB_UART
|
|
bool "Use BRCMSTB UART for low-level debug"
|
|
depends on ARCH_BRCMSTB
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the first serial port on these devices.
|
|
|
|
If you have a Broadcom STB chip and would like early print
|
|
messages to appear over the UART, select this option.
|
|
|
|
config DEBUG_CLPS711X_UART1
|
|
bool "Kernel low-level debugging messages via UART1"
|
|
depends on ARCH_CLPS711X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the first serial port on these devices.
|
|
|
|
config DEBUG_CLPS711X_UART2
|
|
bool "Kernel low-level debugging messages via UART2"
|
|
depends on ARCH_CLPS711X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the second serial port on these devices.
|
|
|
|
config DEBUG_CNS3XXX
|
|
bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
|
|
depends on ARCH_CNS3XXX
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the CNS3xxx UART0.
|
|
|
|
config DEBUG_DAVINCI_DA8XX_UART1
|
|
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
|
|
depends on ARCH_DAVINCI_DA8XX
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 serial port on DaVinci DA8XX devices.
|
|
|
|
config DEBUG_DAVINCI_DA8XX_UART2
|
|
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
|
|
depends on ARCH_DAVINCI_DA8XX
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART2 serial port on DaVinci DA8XX devices.
|
|
|
|
config DEBUG_DAVINCI_DMx_UART0
|
|
bool "Kernel low-level debugging on DaVinci DMx using UART0"
|
|
depends on ARCH_DAVINCI_DMx
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART0 serial port on DaVinci DMx devices.
|
|
|
|
config DEBUG_ZYNQ_UART0
|
|
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART0 on the Zynq platform.
|
|
|
|
config DEBUG_ZYNQ_UART1
|
|
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 on the Zynq platform.
|
|
|
|
If you have a ZC702 board and want early boot messages to
|
|
appear on the USB serial adaptor, select this option.
|
|
|
|
config DEBUG_DC21285_PORT
|
|
bool "Kernel low-level debugging messages via footbridge serial port"
|
|
depends on FOOTBRIDGE
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port in the DC21285 (Footbridge).
|
|
|
|
config DEBUG_DIGICOLOR_UA0
|
|
bool "Kernel low-level debugging messages via Digicolor UA0"
|
|
depends on ARCH_DIGICOLOR
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the UA0 serial port in the CX92755.
|
|
|
|
config DEBUG_FOOTBRIDGE_COM1
|
|
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
|
|
depends on FOOTBRIDGE
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the 8250 at PCI COM1.
|
|
|
|
config DEBUG_HI3620_UART
|
|
bool "Hisilicon HI3620 Debug UART"
|
|
depends on ARCH_HI3xxx
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on HI3620 UART.
|
|
|
|
config DEBUG_HI3716_UART
|
|
bool "Hisilicon Hi3716 Debug UART"
|
|
depends on ARCH_HI3xxx
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on HI3716 UART.
|
|
|
|
config DEBUG_HIGHBANK_UART
|
|
bool "Kernel low-level debugging messages via Highbank UART"
|
|
depends on ARCH_HIGHBANK
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the UART on Highbank based devices.
|
|
|
|
config DEBUG_HIP01_UART
|
|
bool "Hisilicon Hip01 Debug UART"
|
|
depends on ARCH_HIP01
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on HIP01 UART.
|
|
|
|
config DEBUG_HIP04_UART
|
|
bool "Hisilicon HiP04 Debug UART"
|
|
depends on ARCH_HIP04
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on HIP04 UART.
|
|
|
|
config DEBUG_HIX5HD2_UART
|
|
bool "Hisilicon Hix5hd2 Debug UART"
|
|
depends on ARCH_HIX5HD2
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Hix5hd2 UART.
|
|
|
|
config DEBUG_IMX1_UART
|
|
bool "i.MX1 Debug UART"
|
|
depends on SOC_IMX1
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX1.
|
|
|
|
config DEBUG_IMX23_UART
|
|
bool "i.MX23 Debug UART"
|
|
depends on SOC_IMX23
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX23.
|
|
|
|
config DEBUG_IMX25_UART
|
|
bool "i.MX25 Debug UART"
|
|
depends on SOC_IMX25
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX25.
|
|
|
|
config DEBUG_IMX21_IMX27_UART
|
|
bool "i.MX21 and i.MX27 Debug UART"
|
|
depends on SOC_IMX21 || SOC_IMX27
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX21 or i.MX27.
|
|
|
|
config DEBUG_IMX28_UART
|
|
bool "i.MX28 Debug UART"
|
|
depends on SOC_IMX28
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX28.
|
|
|
|
config DEBUG_IMX31_UART
|
|
bool "i.MX31 Debug UART"
|
|
depends on SOC_IMX31
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX31.
|
|
|
|
config DEBUG_IMX35_UART
|
|
bool "i.MX35 Debug UART"
|
|
depends on SOC_IMX35
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX35.
|
|
|
|
config DEBUG_IMX50_UART
|
|
bool "i.MX50 Debug UART"
|
|
depends on SOC_IMX50
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX50.
|
|
|
|
config DEBUG_IMX51_UART
|
|
bool "i.MX51 Debug UART"
|
|
depends on SOC_IMX51
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX51.
|
|
|
|
config DEBUG_IMX53_UART
|
|
bool "i.MX53 Debug UART"
|
|
depends on SOC_IMX53
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX53.
|
|
|
|
config DEBUG_IMX6Q_UART
|
|
bool "i.MX6Q/DL Debug UART"
|
|
depends on SOC_IMX6Q
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX6Q/DL.
|
|
|
|
config DEBUG_IMX6SL_UART
|
|
bool "i.MX6SL Debug UART"
|
|
depends on SOC_IMX6SL
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX6SL.
|
|
|
|
config DEBUG_IMX6SX_UART
|
|
bool "i.MX6SX Debug UART"
|
|
depends on SOC_IMX6SX
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX6SX.
|
|
|
|
config DEBUG_KEYSTONE_UART0
|
|
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
|
|
depends on ARCH_KEYSTONE
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART0 serial port on KEYSTONE2 devices.
|
|
|
|
config DEBUG_KEYSTONE_UART1
|
|
bool "Kernel low-level debugging on KEYSTONE2 using UART1"
|
|
depends on ARCH_KEYSTONE
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 serial port on KEYSTONE2 devices.
|
|
|
|
config DEBUG_KS8695_UART
|
|
bool "KS8695 Debug UART"
|
|
depends on ARCH_KS8695
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on KS8695.
|
|
|
|
config DEBUG_MESON_UARTAO
|
|
bool "Kernel low-level debugging via Meson6 UARTAO"
|
|
depends on ARCH_MESON
|
|
help
|
|
Say Y here if you want kernel low-lever debugging support
|
|
on Amlogic Meson6 based platforms on the UARTAO.
|
|
|
|
config DEBUG_MMP_UART2
|
|
bool "Kernel low-level debugging message via MMP UART2"
|
|
depends on ARCH_MMP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MMP UART2.
|
|
|
|
config DEBUG_MMP_UART3
|
|
bool "Kernel low-level debugging message via MMP UART3"
|
|
depends on ARCH_MMP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MMP UART3.
|
|
|
|
config DEBUG_MSM_UART
|
|
bool "Kernel low-level debugging messages via MSM UART"
|
|
depends on ARCH_MSM
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on MSM devices.
|
|
|
|
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
|
|
MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
|
|
MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
|
|
MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
|
|
|
|
MSM7X30 0xaca00000 0xe1000000 UART1
|
|
MSM7X30 0xacb00000 0xe1000000 UART2
|
|
MSM7X30 0xacc00000 0xe1000000 UART3
|
|
|
|
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
|
|
options based on your needs.
|
|
|
|
config DEBUG_QCOM_UARTDM
|
|
bool "Kernel low-level debugging messages via QCOM UARTDM"
|
|
depends on ARCH_QCOM
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on Qualcomm devices.
|
|
|
|
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
|
|
APQ8064 0x16640000 0xf0040000
|
|
APQ8084 0xf995e000 0xfa75e000
|
|
MSM8X60 0x19c40000 0xf0040000
|
|
MSM8960 0x16440000 0xf0040000
|
|
MSM8974 0xf991e000 0xfa71e000
|
|
|
|
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
|
|
options based on your needs.
|
|
|
|
config DEBUG_MVEBU_UART0
|
|
bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
|
|
depends on ARCH_MVEBU
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MVEBU based platforms on UART0.
|
|
|
|
This option should be used with the old bootloaders
|
|
that left the internal registers mapped at
|
|
0xd0000000. As of today, this is the case on
|
|
platforms such as the Globalscale Mirabox or the
|
|
Plathome OpenBlocks AX3, when using the original
|
|
bootloader.
|
|
|
|
If the wrong DEBUG_MVEBU_UART* option is selected,
|
|
when u-boot hands over to the kernel, the system
|
|
silently crashes, with no serial output at all.
|
|
|
|
config DEBUG_MVEBU_UART0_ALTERNATE
|
|
bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
|
|
depends on ARCH_MVEBU
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MVEBU based platforms on UART0.
|
|
|
|
This option should be used with the new bootloaders
|
|
that remap the internal registers at 0xf1000000.
|
|
|
|
If the wrong DEBUG_MVEBU_UART* option is selected,
|
|
when u-boot hands over to the kernel, the system
|
|
silently crashes, with no serial output at all.
|
|
|
|
config DEBUG_MVEBU_UART1_ALTERNATE
|
|
bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
|
|
depends on ARCH_MVEBU
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MVEBU based platforms on UART1.
|
|
|
|
This option should be used with the new bootloaders
|
|
that remap the internal registers at 0xf1000000.
|
|
|
|
If the wrong DEBUG_MVEBU_UART* option is selected,
|
|
when u-boot hands over to the kernel, the system
|
|
silently crashes, with no serial output at all.
|
|
|
|
config DEBUG_VF_UART
|
|
bool "Vybrid UART"
|
|
depends on SOC_VF610
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Vybrid based platforms.
|
|
|
|
config DEBUG_NETX_UART
|
|
bool "Kernel low-level debugging messages via NetX UART"
|
|
depends on ARCH_NETX
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Hilscher NetX based platforms.
|
|
|
|
config DEBUG_NOMADIK_UART
|
|
bool "Kernel low-level debugging messages via NOMADIK UART"
|
|
depends on ARCH_NOMADIK
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on NOMADIK based platforms.
|
|
|
|
config DEBUG_NSPIRE_CLASSIC_UART
|
|
bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
|
|
depends on ARCH_NSPIRE
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on TI-NSPIRE classic models.
|
|
|
|
config DEBUG_NSPIRE_CX_UART
|
|
bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
|
|
depends on ARCH_NSPIRE
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on TI-NSPIRE CX models.
|
|
|
|
config DEBUG_OMAP1UART1
|
|
bool "Kernel low-level debugging via OMAP1 UART1"
|
|
depends on ARCH_OMAP1
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP1 based platforms (except OMAP730) on the UART1.
|
|
|
|
config DEBUG_OMAP1UART2
|
|
bool "Kernel low-level debugging via OMAP1 UART2"
|
|
depends on ARCH_OMAP1
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP1 based platforms (except OMAP730) on the UART2.
|
|
|
|
config DEBUG_OMAP1UART3
|
|
bool "Kernel low-level debugging via OMAP1 UART3"
|
|
depends on ARCH_OMAP1
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP1 based platforms (except OMAP730) on the UART3.
|
|
|
|
config DEBUG_OMAP2UART1
|
|
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
help
|
|
This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
|
|
omap3 torpedo and 3530 lv som.
|
|
|
|
config DEBUG_OMAP2UART2
|
|
bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP2UART3
|
|
bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP3UART3
|
|
bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
help
|
|
This covers at least cm_t3x, beagle, crane, devkit8000,
|
|
igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
|
|
and 3517evm.
|
|
|
|
config DEBUG_OMAP4UART3
|
|
bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP3UART4
|
|
bool "Kernel low-level debugging messages via OMAP36XX UART4"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP4UART4
|
|
bool "Kernel low-level debugging messages via OMAP4/5 UART4"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP7XXUART1
|
|
bool "Kernel low-level debugging via OMAP730 UART1"
|
|
depends on ARCH_OMAP730
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP730 based platforms on the UART1.
|
|
|
|
config DEBUG_OMAP7XXUART2
|
|
bool "Kernel low-level debugging via OMAP730 UART2"
|
|
depends on ARCH_OMAP730
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP730 based platforms on the UART2.
|
|
|
|
config DEBUG_OMAP7XXUART3
|
|
bool "Kernel low-level debugging via OMAP730 UART3"
|
|
depends on ARCH_OMAP730
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP730 based platforms on the UART3.
|
|
|
|
config DEBUG_TI81XXUART1
|
|
bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_TI81XXUART2
|
|
bool "Kernel low-level debugging messages via TI81XX UART2"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_TI81XXUART3
|
|
bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_AM33XXUART1
|
|
bool "Kernel low-level debugging messages via AM33XX UART1"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_ZOOM_UART
|
|
bool "Kernel low-level debugging messages via Zoom2/3 UART"
|
|
depends on ARCH_OMAP2PLUS
|
|
select DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_PICOXCELL_UART
|
|
depends on ARCH_PICOXCELL
|
|
bool "Use PicoXcell UART for low-level debug"
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on PicoXcell based platforms.
|
|
|
|
config DEBUG_PXA_UART1
|
|
depends on ARCH_PXA
|
|
bool "Use PXA UART1 for low-level debug"
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on PXA UART1.
|
|
|
|
config DEBUG_REALVIEW_STD_PORT
|
|
bool "RealView Default UART"
|
|
depends on ARCH_REALVIEW
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on RealView EB, PB11MP, PBA8
|
|
and PBX platforms.
|
|
|
|
config DEBUG_REALVIEW_PB1176_PORT
|
|
bool "RealView PB1176 UART"
|
|
depends on MACH_REALVIEW_PB1176
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the standard serial port on the RealView
|
|
PB1176 platform.
|
|
|
|
config DEBUG_RK29_UART0
|
|
bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK29_UART1
|
|
bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK29_UART2
|
|
bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK3X_UART0
|
|
bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK3X_UART1
|
|
bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK3X_UART2
|
|
bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK3X_UART3
|
|
bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip based platforms.
|
|
|
|
config DEBUG_RK32_UART2
|
|
bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
|
|
depends on ARCH_ROCKCHIP
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Rockchip RK32xx based platforms.
|
|
|
|
config DEBUG_R7S72100_SCIF2
|
|
bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
|
|
depends on ARCH_R7S72100
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIF2 on Renesas RZ/A1H (R7S72100).
|
|
|
|
config DEBUG_RCAR_GEN1_SCIF0
|
|
bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
|
|
depends on ARCH_R8A7778
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIF0 on Renesas R-Car M1A (R8A7778).
|
|
|
|
config DEBUG_RCAR_GEN1_SCIF2
|
|
bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
|
|
depends on ARCH_R8A7779
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIF2 on Renesas R-Car H1 (R8A7779).
|
|
|
|
config DEBUG_RCAR_GEN2_SCIF0
|
|
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
|
|
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
|
|
M2-N (R8A7793).
|
|
|
|
config DEBUG_RCAR_GEN2_SCIF2
|
|
bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
|
|
depends on ARCH_R8A7794
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIF2 on Renesas R-Car E2 (R8A7794).
|
|
|
|
config DEBUG_RMOBILE_SCIFA0
|
|
bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
|
|
depends on ARCH_R8A73A4 || ARCH_SH7372
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
|
|
AP4 (SH7372).
|
|
|
|
config DEBUG_RMOBILE_SCIFA1
|
|
bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
|
|
depends on ARCH_R8A7740
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
|
|
|
|
config DEBUG_RMOBILE_SCIFA4
|
|
bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
|
|
depends on ARCH_SH73A0
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
|
|
|
|
config DEBUG_S3C_UART0
|
|
depends on PLAT_SAMSUNG
|
|
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
|
|
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
|
|
select DEBUG_S5PV210_UART if ARCH_S5PV210
|
|
bool "Use Samsung S3C UART 0 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 0. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C_UART1
|
|
depends on PLAT_SAMSUNG
|
|
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
|
|
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
|
|
select DEBUG_S5PV210_UART if ARCH_S5PV210
|
|
bool "Use Samsung S3C UART 1 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 1. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C_UART2
|
|
depends on PLAT_SAMSUNG
|
|
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
|
|
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
|
|
select DEBUG_S5PV210_UART if ARCH_S5PV210
|
|
bool "Use Samsung S3C UART 2 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 2. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C_UART3
|
|
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
|
|
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
|
|
select DEBUG_S5PV210_UART if ARCH_S5PV210
|
|
bool "Use Samsung S3C UART 3 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 3. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C2410_UART0
|
|
depends on ARCH_S3C24XX
|
|
select DEBUG_S3C2410_UART
|
|
bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 0. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C2410_UART1
|
|
depends on ARCH_S3C24XX
|
|
select DEBUG_S3C2410_UART
|
|
bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 1. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_S3C2410_UART2
|
|
depends on ARCH_S3C24XX
|
|
select DEBUG_S3C2410_UART
|
|
bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 2. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
config DEBUG_SA1100
|
|
depends on ARCH_SA1100
|
|
bool "Use SA1100 UARTs for low-level debug"
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on SA-11x0 UART ports. The kernel will check for the first
|
|
enabled UART in a sequence 3-1-2.
|
|
|
|
config DEBUG_SOCFPGA_UART
|
|
depends on ARCH_SOCFPGA
|
|
bool "Use SOCFPGA UART for low-level debug"
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on SOCFPGA based platforms.
|
|
|
|
config DEBUG_SUN9I_UART0
|
|
bool "Kernel low-level debugging messages via sun9i UART0"
|
|
depends on MACH_SUN9I
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A80 based platforms on the UART0.
|
|
|
|
config DEBUG_SUNXI_UART0
|
|
bool "Kernel low-level debugging messages via sunXi UART0"
|
|
depends on ARCH_SUNXI
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A1X based platforms on the UART0.
|
|
|
|
config DEBUG_SUNXI_UART1
|
|
bool "Kernel low-level debugging messages via sunXi UART1"
|
|
depends on ARCH_SUNXI
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A1X based platforms on the UART1.
|
|
|
|
config DEBUG_SUNXI_R_UART
|
|
bool "Kernel low-level debugging messages via sunXi R_UART"
|
|
depends on MACH_SUN6I || MACH_SUN8I
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A31/A23 based platforms on the R_UART.
|
|
|
|
config TEGRA_DEBUG_UART_AUTO_ODMDATA
|
|
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Automatically determines which UART to use for low-level
|
|
debug based on the ODMDATA value. This value is part of
|
|
the BCT, and is written to the boot memory device using
|
|
nvflash, or other flashing tool. When bits 19:18 are 3,
|
|
then bits 17:15 indicate which UART to use; 0/1/2/3/4
|
|
are UART A/B/C/D/E.
|
|
|
|
config TEGRA_DEBUG_UARTA
|
|
bool "Kernel low-level debugging messages via Tegra UART A"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config TEGRA_DEBUG_UARTB
|
|
bool "Kernel low-level debugging messages via Tegra UART B"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config TEGRA_DEBUG_UARTC
|
|
bool "Kernel low-level debugging messages via Tegra UART C"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config TEGRA_DEBUG_UARTD
|
|
bool "Kernel low-level debugging messages via Tegra UART D"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config TEGRA_DEBUG_UARTE
|
|
bool "Kernel low-level debugging messages via Tegra UART E"
|
|
depends on ARCH_TEGRA
|
|
select DEBUG_TEGRA_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config DEBUG_SIRFPRIMA2_UART1
|
|
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
|
|
depends on ARCH_PRIMA2
|
|
select DEBUG_SIRFSOC_UART
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart1 port on SiRFprimaII devices.
|
|
|
|
config DEBUG_SIRFATLAS7_UART0
|
|
bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
|
|
depends on ARCH_ATLAS7
|
|
select DEBUG_SIRFSOC_UART
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart0 port on SiRFATLAS7 devices.The uart0
|
|
is used on SiRFATLAS7 as a extra debug port.sometimes an extra
|
|
debug port can be very useful.
|
|
|
|
config DEBUG_SIRFATLAS7_UART1
|
|
bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
|
|
depends on ARCH_ATLAS7
|
|
select DEBUG_SIRFSOC_UART
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart1 port on SiRFATLAS7 devices.
|
|
|
|
config STIH41X_DEBUG_ASC2
|
|
bool "Use StiH415/416 ASC2 UART for low-level debug"
|
|
depends on ARCH_STI
|
|
select DEBUG_STI_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on STiH415/416 based platforms like b2000, which has
|
|
default UART wired up to ASC2.
|
|
|
|
If unsure, say N.
|
|
|
|
config STIH41X_DEBUG_SBC_ASC1
|
|
bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
|
|
depends on ARCH_STI
|
|
select DEBUG_STI_UART
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on STiH415/416 based platforms like b2020. which has
|
|
default UART wired up to SBC ASC1.
|
|
|
|
If unsure, say N.
|
|
|
|
config DEBUG_U300_UART
|
|
bool "Kernel low-level debugging messages via U300 UART0"
|
|
depends on ARCH_U300
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart port on U300 devices.
|
|
|
|
config DEBUG_UX500_UART
|
|
depends on ARCH_U8500
|
|
bool "Use Ux500 UART for low-level debug"
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Ux500 based platforms.
|
|
|
|
config DEBUG_MT6589_UART0
|
|
bool "Mediatek mt6589 UART0"
|
|
depends on ARCH_MEDIATEK
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
for Mediatek mt6589 based platforms on UART0.
|
|
|
|
config DEBUG_MT8127_UART0
|
|
bool "Mediatek mt8127/mt6592 UART0"
|
|
depends on ARCH_MEDIATEK
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
for Mediatek mt8127 based platforms on UART0.
|
|
|
|
config DEBUG_MT8135_UART3
|
|
bool "Mediatek mt8135 UART3"
|
|
depends on ARCH_MEDIATEK
|
|
select DEBUG_UART_8250
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
for Mediatek mt8135 based platforms on UART3.
|
|
|
|
config DEBUG_VEXPRESS_UART0_DETECT
|
|
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
|
|
depends on ARCH_VEXPRESS && CPU_CP15_MMU
|
|
help
|
|
This option enables a simple heuristic which tries to determine
|
|
the motherboard's memory map variant (original or RS1) and then
|
|
choose the relevant UART0 base address.
|
|
|
|
Note that this will only work with standard A-class core tiles,
|
|
and may fail with non-standard SMM or custom software models.
|
|
|
|
config DEBUG_VEXPRESS_UART0_CA9
|
|
bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
|
|
depends on ARCH_VEXPRESS
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
This option selects UART0 at 0x10009000. Except for custom models,
|
|
this applies only to the V2P-CA9 tile.
|
|
|
|
config DEBUG_VEXPRESS_UART0_RS1
|
|
bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
|
|
depends on ARCH_VEXPRESS
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
This option selects UART0 at 0x1c090000. This applies to most
|
|
of the tiles using the RS1 memory map, including all new A-class
|
|
core tiles, FPGA-based SMMs and software models.
|
|
|
|
config DEBUG_VEXPRESS_UART0_CRX
|
|
bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
|
|
depends on ARCH_VEXPRESS && !MMU
|
|
select DEBUG_UART_PL01X
|
|
help
|
|
This option selects UART0 at 0xb0090000. This is appropriate for
|
|
Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
|
|
|
|
config DEBUG_VT8500_UART0
|
|
bool "Use UART0 on VIA/Wondermedia SoCs"
|
|
depends on ARCH_VT8500
|
|
help
|
|
This option selects UART0 on VIA/Wondermedia System-on-a-chip
|
|
devices, including VT8500, WM8505, WM8650 and WM8850.
|
|
|
|
config DEBUG_ICEDCC
|
|
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the EmbeddedICE macrocell's DCC channel using
|
|
co-processor 14. This is known to work on the ARM9 style ICE
|
|
channel and on the XScale with the PEEDI.
|
|
|
|
Note that the system will appear to hang during boot if there
|
|
is nothing connected to read from the DCC.
|
|
|
|
config DEBUG_SEMIHOSTING
|
|
bool "Kernel low-level debug output via semihosting I/O"
|
|
help
|
|
Semihosting enables code running on an ARM target to use
|
|
the I/O facilities on a host debugger/emulator through a
|
|
simple SVC call. The host debugger or emulator must have
|
|
semihosting enabled for the special svc call to be trapped
|
|
otherwise the kernel will crash.
|
|
|
|
This is known to work with OpenOCD, as well as
|
|
ARM's Fast Models, or any other controlling environment
|
|
that implements semihosting.
|
|
|
|
For more details about semihosting, please see
|
|
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
|
|
|
|
config DEBUG_LL_UART_8250
|
|
bool "Kernel low-level debugging via 8250 UART"
|
|
help
|
|
Say Y here if you wish the debug print routes to direct
|
|
their output to an 8250 UART. You can use this option
|
|
to provide the parameters for the 8250 UART rather than
|
|
selecting one of the platform specific options above if
|
|
you know the parameters for the port.
|
|
|
|
This option is preferred over the platform specific
|
|
options; the platform specific options are deprecated
|
|
and will be soon removed.
|
|
|
|
config DEBUG_LL_UART_EFM32
|
|
bool "Kernel low-level debugging via efm32 UART"
|
|
depends on ARCH_EFM32
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to an UART or USART port on efm32 based
|
|
machines. Use the following addresses for DEBUG_UART_PHYS:
|
|
|
|
0x4000c000 | USART0
|
|
0x4000c400 | USART1
|
|
0x4000c800 | USART2
|
|
0x4000e000 | UART0
|
|
0x4000e400 | UART1
|
|
|
|
config DEBUG_LL_UART_PL01X
|
|
bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
|
|
help
|
|
Say Y here if you wish the debug print routes to direct
|
|
their output to a PL01x Primecell UART. You can use
|
|
this option to provide the parameters for the UART
|
|
rather than selecting one of the platform specific
|
|
options above if you know the parameters for the port.
|
|
|
|
This option is preferred over the platform specific
|
|
options; the platform specific options are deprecated
|
|
and will be soon removed.
|
|
|
|
endchoice
|
|
|
|
config DEBUG_AT91_UART
|
|
bool
|
|
depends on ARCH_AT91
|
|
|
|
config DEBUG_EXYNOS_UART
|
|
bool
|
|
|
|
config DEBUG_S3C2410_UART
|
|
bool
|
|
select DEBUG_S3C24XX_UART
|
|
|
|
config DEBUG_S3C24XX_UART
|
|
bool
|
|
|
|
config DEBUG_S5PV210_UART
|
|
bool
|
|
|
|
config DEBUG_OMAP2PLUS_UART
|
|
bool
|
|
depends on ARCH_OMAP2PLUS
|
|
|
|
config DEBUG_IMX_UART_PORT
|
|
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
|
|
DEBUG_IMX25_UART || \
|
|
DEBUG_IMX21_IMX27_UART || \
|
|
DEBUG_IMX31_UART || \
|
|
DEBUG_IMX35_UART || \
|
|
DEBUG_IMX50_UART || \
|
|
DEBUG_IMX51_UART || \
|
|
DEBUG_IMX53_UART || \
|
|
DEBUG_IMX6Q_UART || \
|
|
DEBUG_IMX6SL_UART || \
|
|
DEBUG_IMX6SX_UART
|
|
default 1
|
|
depends on ARCH_MXC
|
|
help
|
|
Choose UART port on which kernel low-level debug messages
|
|
should be output.
|
|
|
|
config DEBUG_VF_UART_PORT
|
|
int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
|
|
default 1
|
|
range 0 3
|
|
depends on SOC_VF610
|
|
help
|
|
Choose UART port on which kernel low-level debug messages
|
|
should be output.
|
|
|
|
config DEBUG_TEGRA_UART
|
|
bool
|
|
depends on ARCH_TEGRA
|
|
|
|
config DEBUG_STI_UART
|
|
bool
|
|
depends on ARCH_STI
|
|
|
|
config DEBUG_SIRFSOC_UART
|
|
bool
|
|
depends on ARCH_SIRF
|
|
|
|
config DEBUG_LL_INCLUDE
|
|
string
|
|
default "debug/sa1100.S" if DEBUG_SA1100
|
|
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
|
|
default "debug/at91.S" if DEBUG_AT91_UART
|
|
default "debug/asm9260.S" if DEBUG_ASM9260_UART
|
|
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
|
|
default "debug/meson.S" if DEBUG_MESON_UARTAO
|
|
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
|
|
default "debug/exynos.S" if DEBUG_EXYNOS_UART
|
|
default "debug/efm32.S" if DEBUG_LL_UART_EFM32
|
|
default "debug/icedcc.S" if DEBUG_ICEDCC
|
|
default "debug/imx.S" if DEBUG_IMX1_UART || \
|
|
DEBUG_IMX25_UART || \
|
|
DEBUG_IMX21_IMX27_UART || \
|
|
DEBUG_IMX31_UART || \
|
|
DEBUG_IMX35_UART || \
|
|
DEBUG_IMX50_UART || \
|
|
DEBUG_IMX51_UART || \
|
|
DEBUG_IMX53_UART ||\
|
|
DEBUG_IMX6Q_UART || \
|
|
DEBUG_IMX6SL_UART || \
|
|
DEBUG_IMX6SX_UART
|
|
default "debug/ks8695.S" if DEBUG_KS8695_UART
|
|
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
|
|
default "debug/netx.S" if DEBUG_NETX_UART
|
|
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
|
|
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
|
|
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
|
|
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
|
|
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
|
|
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
|
|
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
|
|
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
|
|
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
|
|
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
|
|
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
|
|
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
|
|
default "debug/sti.S" if DEBUG_STI_UART
|
|
default "debug/tegra.S" if DEBUG_TEGRA_UART
|
|
default "debug/ux500.S" if DEBUG_UX500_UART
|
|
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
|
|
default "debug/vf.S" if DEBUG_VF_UART
|
|
default "debug/vt8500.S" if DEBUG_VT8500_UART0
|
|
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
|
|
default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
|
|
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
|
|
default "mach/debug-macro.S"
|
|
|
|
# Compatibility options for PL01x
|
|
config DEBUG_UART_PL01X
|
|
bool
|
|
|
|
# Compatibility options for 8250
|
|
config DEBUG_UART_8250
|
|
def_bool ARCH_DOVE || ARCH_EBSA110 || \
|
|
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
|
|
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
|
|
ARCH_IOP33X || ARCH_IXP4XX || \
|
|
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
|
|
|
|
# Compatibility options for BCM63xx
|
|
config DEBUG_UART_BCM63XX
|
|
def_bool ARCH_BCM_63XX
|
|
|
|
config DEBUG_UART_PHYS
|
|
hex "Physical base address of debug UART"
|
|
default 0x00100a00 if DEBUG_NETX_UART
|
|
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
|
|
default 0x01c28000 if DEBUG_SUNXI_UART0
|
|
default 0x01c28400 if DEBUG_SUNXI_UART1
|
|
default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
|
|
default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
|
|
default 0x01f02800 if DEBUG_SUNXI_R_UART
|
|
default 0x02530c00 if DEBUG_KEYSTONE_UART0
|
|
default 0x02531000 if DEBUG_KEYSTONE_UART1
|
|
default 0x03010fe0 if ARCH_RPC
|
|
default 0x07000000 if DEBUG_SUN9I_UART0
|
|
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
|
|
DEBUG_VEXPRESS_UART0_CA9
|
|
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
|
|
default 0x10124000 if DEBUG_RK3X_UART0
|
|
default 0x10126000 if DEBUG_RK3X_UART1
|
|
default 0x101f1000 if ARCH_VERSATILE
|
|
default 0x101fb000 if DEBUG_NOMADIK_UART
|
|
default 0x11002000 if DEBUG_MT8127_UART0
|
|
default 0x11006000 if DEBUG_MT6589_UART0
|
|
default 0x11009000 if DEBUG_MT8135_UART3
|
|
default 0x16000000 if ARCH_INTEGRATOR
|
|
default 0x18000300 if DEBUG_BCM_5301X
|
|
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
|
|
default 0x18020000 if DEBUG_SIRFATLAS7_UART1
|
|
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
|
|
default 0x20001000 if DEBUG_HIP01_UART
|
|
default 0x20060000 if DEBUG_RK29_UART0
|
|
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
|
|
default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
|
|
default 0x20201000 if DEBUG_BCM2835
|
|
default 0x3e000000 if DEBUG_BCM_KONA_UART
|
|
default 0x4000e400 if DEBUG_LL_UART_EFM32
|
|
default 0x40090000 if ARCH_LPC32XX
|
|
default 0x40100000 if DEBUG_PXA_UART1
|
|
default 0x42000000 if ARCH_GEMINI
|
|
default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
|
|
DEBUG_S3C2410_UART0)
|
|
default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
|
|
DEBUG_S3C2410_UART1)
|
|
default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
|
|
DEBUG_S3C2410_UART2)
|
|
default 0x78000000 if DEBUG_CNS3XXX
|
|
default 0x7c0003f8 if FOOTBRIDGE
|
|
default 0x80010000 if DEBUG_ASM9260_UART
|
|
default 0x80070000 if DEBUG_IMX23_UART
|
|
default 0x80074000 if DEBUG_IMX28_UART
|
|
default 0x80230000 if DEBUG_PICOXCELL_UART
|
|
default 0x808c0000 if ARCH_EP93XX
|
|
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
|
|
default 0xa9a00000 if DEBUG_MSM_UART
|
|
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
|
|
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
|
|
default 0xc0013000 if DEBUG_U300_UART
|
|
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
|
|
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
|
|
default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
|
|
default 0xd0012000 if DEBUG_MVEBU_UART0
|
|
default 0xc81004c0 if DEBUG_MESON_UARTAO
|
|
default 0xd4017000 if DEBUG_MMP_UART2
|
|
default 0xd4018000 if DEBUG_MMP_UART3
|
|
default 0xe0000000 if ARCH_SPEAR13XX
|
|
default 0xe4007000 if DEBUG_HIP04_UART
|
|
default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
|
|
default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
|
|
default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
|
|
default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
|
|
default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
|
|
default 0xe8008000 if DEBUG_R7S72100_SCIF2
|
|
default 0xf0000be0 if ARCH_EBSA110
|
|
default 0xf040ab00 if DEBUG_BRCMSTB_UART
|
|
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
|
|
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
|
|
default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
|
|
ARCH_ORION5X
|
|
default 0xf7fc9000 if DEBUG_BERLIN_UART
|
|
default 0xf8b00000 if DEBUG_HIX5HD2_UART
|
|
default 0xf991e000 if DEBUG_QCOM_UARTDM
|
|
default 0xfcb00000 if DEBUG_HI3620_UART
|
|
default 0xfe800000 if ARCH_IOP32X
|
|
default 0xff690000 if DEBUG_RK32_UART2
|
|
default 0xffc02000 if DEBUG_SOCFPGA_UART
|
|
default 0xffd82340 if ARCH_IOP13XX
|
|
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
|
|
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
|
|
default 0xfff36000 if DEBUG_HIGHBANK_UART
|
|
default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
|
|
default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
|
|
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
|
|
default 0xfffe8600 if DEBUG_UART_BCM63XX
|
|
default 0xfffff700 if ARCH_IOP33X
|
|
depends on ARCH_EP93XX || \
|
|
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
|
|
DEBUG_LL_UART_EFM32 || \
|
|
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
|
|
DEBUG_MSM_UART || DEBUG_NETX_UART || \
|
|
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
|
|
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
|
|
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
|
|
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
|
|
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
|
|
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
|
|
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
|
|
|
|
config DEBUG_UART_VIRT
|
|
hex "Virtual base address of debug UART"
|
|
default 0xe0000a00 if DEBUG_NETX_UART
|
|
default 0xe0010fe0 if ARCH_RPC
|
|
default 0xe1000000 if DEBUG_MSM_UART
|
|
default 0xf0000be0 if ARCH_EBSA110
|
|
default 0xf0010000 if DEBUG_ASM9260_UART
|
|
default 0xf01fb000 if DEBUG_NOMADIK_UART
|
|
default 0xf0201000 if DEBUG_BCM2835
|
|
default 0xf1000300 if DEBUG_BCM_5301X
|
|
default 0xf1002000 if DEBUG_MT8127_UART0
|
|
default 0xf1006000 if DEBUG_MT6589_UART0
|
|
default 0xf1009000 if DEBUG_MT8135_UART3
|
|
default 0xf11f1000 if ARCH_VERSATILE
|
|
default 0xf1600000 if ARCH_INTEGRATOR
|
|
default 0xf1c28000 if DEBUG_SUNXI_UART0
|
|
default 0xf1c28400 if DEBUG_SUNXI_UART1
|
|
default 0xf1f02800 if DEBUG_SUNXI_R_UART
|
|
default 0xf6200000 if DEBUG_PXA_UART1
|
|
default 0xf4090000 if ARCH_LPC32XX
|
|
default 0xf4200000 if ARCH_GEMINI
|
|
default 0xf7000000 if DEBUG_SUN9I_UART0
|
|
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
|
|
DEBUG_S3C2410_UART0)
|
|
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
|
|
DEBUG_S3C2410_UART1)
|
|
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
|
|
DEBUG_S3C2410_UART2)
|
|
default 0xf7fc9000 if DEBUG_BERLIN_UART
|
|
default 0xf8007000 if DEBUG_HIP04_UART
|
|
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
|
|
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
|
|
default 0xfa71e000 if DEBUG_QCOM_UARTDM
|
|
default 0xfb002000 if DEBUG_CNS3XXX
|
|
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
|
|
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
|
|
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
|
|
default 0xfcfe8600 if DEBUG_UART_BCM63XX
|
|
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
|
|
default 0xfd000000 if ARCH_SPEAR13XX
|
|
default 0xfd012000 if ARCH_MV78XX0
|
|
default 0xfde12000 if ARCH_DOVE
|
|
default 0xfe012000 if ARCH_ORION5X
|
|
default 0xf31004c0 if DEBUG_MESON_UARTAO
|
|
default 0xfe017000 if DEBUG_MMP_UART2
|
|
default 0xfe018000 if DEBUG_MMP_UART3
|
|
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
|
|
default 0xfe230000 if DEBUG_PICOXCELL_UART
|
|
default 0xfe300000 if DEBUG_BCM_KONA_UART
|
|
default 0xfe800000 if ARCH_IOP32X
|
|
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
|
|
default 0xfeb24000 if DEBUG_RK3X_UART0
|
|
default 0xfeb26000 if DEBUG_RK3X_UART1
|
|
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
|
|
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
|
|
default 0xfec02000 if DEBUG_SOCFPGA_UART
|
|
default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
|
|
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
|
|
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
|
|
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
|
|
default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
|
|
default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
|
|
default 0xfec90000 if DEBUG_RK32_UART2
|
|
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
|
|
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
|
|
default 0xfed60000 if DEBUG_RK29_UART0
|
|
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
|
|
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
|
|
default 0xfedc0000 if ARCH_EP93XX
|
|
default 0xfee003f8 if FOOTBRIDGE
|
|
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
|
|
default 0xfee82340 if ARCH_IOP13XX
|
|
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
|
|
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
|
|
default 0xfef36000 if DEBUG_HIGHBANK_UART
|
|
default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
|
|
default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
|
|
default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
|
|
default 0xfefff700 if ARCH_IOP33X
|
|
default 0xff003000 if DEBUG_U300_UART
|
|
default 0xffd01000 if DEBUG_HIP01_UART
|
|
default DEBUG_UART_PHYS if !MMU
|
|
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
|
|
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
|
|
DEBUG_MSM_UART || DEBUG_NETX_UART || \
|
|
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
|
|
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
|
|
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
|
|
|
|
config DEBUG_UART_8250_SHIFT
|
|
int "Register offset shift for the 8250 debug UART"
|
|
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
|
|
default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
|
|
DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
|
|
default 2
|
|
|
|
config DEBUG_UART_8250_WORD
|
|
bool "Use 32-bit accesses for 8250 UART"
|
|
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
|
|
depends on DEBUG_UART_8250_SHIFT >= 2
|
|
default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
|
|
ARCH_KEYSTONE || \
|
|
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
|
|
DEBUG_DAVINCI_DA8XX_UART2 || \
|
|
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
|
|
DEBUG_BRCMSTB_UART
|
|
|
|
config DEBUG_UART_8250_FLOW_CONTROL
|
|
bool "Enable flow control for 8250 UART"
|
|
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
|
|
default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
|
|
|
|
config DEBUG_UNCOMPRESS
|
|
bool
|
|
depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
|
|
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
|
|
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
|
|
help
|
|
This option influences the normal decompressor output for
|
|
multiplatform kernels. Normally, multiplatform kernels disable
|
|
decompressor output because it is not possible to know where to
|
|
send the decompressor output.
|
|
|
|
When this option is set, the selected DEBUG_LL output method
|
|
will be re-used for normal decompressor output on multiplatform
|
|
kernels.
|
|
|
|
|
|
config UNCOMPRESS_INCLUDE
|
|
string
|
|
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
|
|
PLAT_SAMSUNG || ARCH_EFM32
|
|
default "mach/uncompress.h"
|
|
|
|
config EARLY_PRINTK
|
|
bool "Early printk"
|
|
depends on DEBUG_LL
|
|
help
|
|
Say Y here if you want to have an early console using the
|
|
kernel low-level debugging functions. Add earlyprintk to your
|
|
kernel parameters to enable this console.
|
|
|
|
config ARM_KPROBES_TEST
|
|
tristate "Kprobes test module"
|
|
depends on KPROBES && MODULES
|
|
help
|
|
Perform tests of kprobes API and instruction set simulation.
|
|
|
|
config PID_IN_CONTEXTIDR
|
|
bool "Write the current PID to the CONTEXTIDR register"
|
|
depends on CPU_COPY_V6
|
|
help
|
|
Enabling this option causes the kernel to write the current PID to
|
|
the PROCID field of the CONTEXTIDR register, at the expense of some
|
|
additional instructions during context switch. Say Y here only if you
|
|
are planning to use hardware trace tools with this kernel.
|
|
|
|
config DEBUG_SET_MODULE_RONX
|
|
bool "Set loadable kernel module data as NX and text as RO"
|
|
depends on MODULES
|
|
---help---
|
|
This option helps catch unintended modifications to loadable
|
|
kernel module's text and read-only data. It also prevents execution
|
|
of module data. Such protection may interfere with run-time code
|
|
patching and dynamic kernel tracing - and they might also protect
|
|
against certain classes of kernel exploits.
|
|
If in doubt, say "N".
|
|
|
|
menuconfig CORESIGHT
|
|
bool "CoreSight Tracing Support"
|
|
select ARM_AMBA
|
|
help
|
|
This framework provides a kernel interface for the CoreSight debug
|
|
and trace drivers to register themselves with. It's intended to build
|
|
a topological view of the CoreSight components based on a DT
|
|
specification and configure the right serie of components when a
|
|
trace source gets enabled.
|
|
|
|
if CORESIGHT
|
|
config CORESIGHT_LINKS_AND_SINKS
|
|
bool "CoreSight Link and Sink drivers"
|
|
help
|
|
This enables support for CoreSight link and sink drivers that are
|
|
responsible for transporting and collecting the trace data
|
|
respectively. Link and sinks are dynamically aggregated with a trace
|
|
entity at run time to form a complete trace path.
|
|
|
|
config CORESIGHT_LINK_AND_SINK_TMC
|
|
bool "Coresight generic TMC driver"
|
|
depends on CORESIGHT_LINKS_AND_SINKS
|
|
help
|
|
This enables support for the Trace Memory Controller driver. Depending
|
|
on its configuration the device can act as a link (embedded trace router
|
|
- ETR) or sink (embedded trace FIFO). The driver complies with the
|
|
generic implementation of the component without special enhancement or
|
|
added features.
|
|
|
|
config CORESIGHT_SINK_TPIU
|
|
bool "Coresight generic TPIU driver"
|
|
depends on CORESIGHT_LINKS_AND_SINKS
|
|
help
|
|
This enables support for the Trace Port Interface Unit driver, responsible
|
|
for bridging the gap between the on-chip coresight components and a trace
|
|
port collection engine, typically connected to an external host for use
|
|
case capturing more traces than the on-board coresight memory can handle.
|
|
|
|
config CORESIGHT_SINK_ETBV10
|
|
bool "Coresight ETBv1.0 driver"
|
|
depends on CORESIGHT_LINKS_AND_SINKS
|
|
help
|
|
This enables support for the Embedded Trace Buffer version 1.0 driver
|
|
that complies with the generic implementation of the component without
|
|
special enhancement or added features.
|
|
|
|
config CORESIGHT_SOURCE_ETM3X
|
|
bool "CoreSight Embedded Trace Macrocell 3.x driver"
|
|
select CORESIGHT_LINKS_AND_SINKS
|
|
help
|
|
This driver provides support for processor ETM3.x and PTM1.x modules,
|
|
which allows tracing the instructions that a processor is executing
|
|
This is primarily useful for instruction level tracing. Depending
|
|
the ETM version data tracing may also be available.
|
|
endif
|
|
endmenu
|