kernel-fxtec-pro1x/drivers/iio/light
Greg Kroah-Hartman 78a66b00d9 Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.
Given Linus announced a 4.8rc coming up, hopefully time for one more
 lot of IIO patches this cycle.  Some of these are actually
 improvements / fixes for patches earlier in the cycle.
 
 New device support
 * st_accel driver - support devices with 8 bit channels.
 
 Cleanup
 * A general cleanup of the iio tools under /tools/ from Hartmut.
   I'm more than a little embarassed by how bad some of these were! Are well,
   much more refined and less bug prone now.
   These cover lots of stuff like unhandled error returns, memory leaks as
   well as general refactoring to tidy the code up.
 * iio_simple_dummy - fix memory leaks in the init functions, drop some
   pointless error returns from functions that never generate errors and
   make the module parameter explicitly unsigned.
 * More buffer handling reworks from Lars-Peter, this time targetting hardware
   buffers (a little used corner that looks likely to get more use in the near
   future). Specifically:
   - Always compute the masklength as inkernel buffer users may need it.
   - Add a means of labeling which buffer modes a given buffer implementation
     supports.
   - In the case of hardware buffers, require strict scan matching rather than
     matching to a superset.  Currently the demux is bypassed by these drivers
     (this may well not change for efficiency reasons) so allowing a superset
     of channels to be selected would otherwise lead to more data than requested
     confusing userspace.
 
 Driver funcationality improvments
 * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
   own input driver.
 * mma8452
   - event support
   - event debouncing
   - high  pass filter configuration
   - triggers
 * vf610 - allow conversion mode to be adjusted
 
 Fixlets
 * mmc35240
   - Off by one error that by coincidence had no real effect.
   - i2c_device_name should be lowercase.
   - Lack of null terminator at end of attributes array.
   - Avoid computing the fractional part of the magnetic field by moving
     the scaling into userspace where floating point is available to simplify
     the maths.
   - Use a smaller sleep before assuming the measurement is done.  This is
     safe and improves the possible polling rate.
   - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
     code and the value used in the code seems to be correct.
 * stk3310 - make a local variable signed to ensure error handling works.
 * twl4030
   - fix calculation of the temperature sense current - bug unlikely
     to have ever been noticed as the difference is small.
   - Fix errors in descriptions.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVdgz8AAoJEFSFNJnE9BaIMSoP/RYq9yzkRtQ+T7ZnxdW0uaVK
 W8zhcg9W62dKbu0ccMVI+ESv9bg+3Ti/ZHE2251olYzXER5qrUUqB7llpgJeoni+
 ft1RyOZYYTWqv/2fx9Jdn+h4792tv4nykdgY3YhxR3anPD5Tb3PcRryCJ739d6xL
 c8HZedMP9znbC7BiEzRcLBPiyiv+NFKHF0T6LCkwlTGoe6q+8yaW1blmxTRmtpnD
 Wpf08/vafBmbjUmxfcvtgyOr73D6/kNOk9xYtvbQguD5nG5oHRe96nlaTtW7//hi
 ybP0q+UPV7Hss1pgufEZufPfWglsqOpIWJ7diUyXzvf9x7FAUd2nuiAHKybUg4bT
 yC2dSCVgRAa1zLEwcTub5MNtjkcfM0l9wsnCCIssD5p9s4EEenge1UjHsV7zm/KA
 JzBKBRz98Mo6m+F2gWZkkpuIb9UbI99oLBVDzhFBYf77b1L8curJ+pBH2lcICMun
 K5+WC3itkl7QImbyrCXdHmu9/oWS2+MSVHsmmL4omMFb071/C1iAUCIJahJrbgcy
 jIjaNJp3WgOplQp4tlP6WtsbzHh0DzjjLj+RKFv2mqYMlHhhAFdoH68qXPxG3kYo
 IxyGh7sH7ic5BQyt4B8/GhxakDuf55O/kyS7t01B3c5JbJp/IAbobfWkpCtuICYV
 GIIZTKI5kJb1Q8P7AbUD
 =sNVc
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-v4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.

Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle.  Some of these are actually
improvements / fixes for patches earlier in the cycle.

New device support
* st_accel driver - support devices with 8 bit channels.

Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
  I'm more than a little embarassed by how bad some of these were! Are well,
  much more refined and less bug prone now.
  These cover lots of stuff like unhandled error returns, memory leaks as
  well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
  pointless error returns from functions that never generate errors and
  make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
  buffers (a little used corner that looks likely to get more use in the near
  future). Specifically:
  - Always compute the masklength as inkernel buffer users may need it.
  - Add a means of labeling which buffer modes a given buffer implementation
    supports.
  - In the case of hardware buffers, require strict scan matching rather than
    matching to a superset.  Currently the demux is bypassed by these drivers
    (this may well not change for efficiency reasons) so allowing a superset
    of channels to be selected would otherwise lead to more data than requested
    confusing userspace.

Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
  own input driver.
* mma8452
  - event support
  - event debouncing
  - high  pass filter configuration
  - triggers
* vf610 - allow conversion mode to be adjusted

Fixlets
* mmc35240
  - Off by one error that by coincidence had no real effect.
  - i2c_device_name should be lowercase.
  - Lack of null terminator at end of attributes array.
  - Avoid computing the fractional part of the magnetic field by moving
    the scaling into userspace where floating point is available to simplify
    the maths.
  - Use a smaller sleep before assuming the measurement is done.  This is
    safe and improves the possible polling rate.
  - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
    code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
  - fix calculation of the temperature sense current - bug unlikely
    to have ever been noticed as the difference is small.
  - Fix errors in descriptions.
2015-06-10 20:48:34 -07:00
..
acpi-als.c iio: acpi: Add support for ACPI0008 Ambient Light Sensor 2015-05-10 20:31:48 +01:00
adjd_s311.c iio: delete non-required instances of include <linux/init.h> 2014-01-11 11:59:00 +00:00
al3320a.c iio: Add Dyna-Image AL3320A ambient light sensor driver 2014-09-10 20:25:56 +01:00
apds9300.c iio: Remove support for the legacy event config interface 2013-12-08 13:13:52 +00:00
bh1750.c iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors 2015-05-10 20:31:46 +01:00
cm3232.c iio: light: Added PM support for Capella CM3232 ambient light sensor driver. 2015-03-08 12:04:57 +00:00
cm3323.c iio: light: Add support for Capella CM3323 color sensor 2015-03-15 11:43:02 +00:00
cm32181.c iio: light: cm32181: Fix typo 's/claibscale/calibscale/' 2015-01-25 22:53:49 +00:00
cm36651.c iio: cm36651: Fix i2c client leak and possible NULL pointer dereference 2014-03-22 12:22:49 +00:00
gp2ap020a00f.c iio: gp2ap020a00f: Use put_unaligned_le32 2015-02-14 17:28:41 +00:00
hid-sensor-als.c iio: light: hid-sensor-als.c: Fix memory leak in probe() 2015-05-17 09:10:05 +01:00
hid-sensor-prox.c Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle. 2015-05-24 11:45:21 -07:00
isl29125.c iio: Add Intersil isl29125 digital color light sensor driver 2014-07-07 09:06:50 +01:00
jsa1212.c iio: jsa1212: Constify struct regmap_config 2015-02-25 11:37:53 +00:00
Kconfig iio: acpi: Add support for ACPI0008 Ambient Light Sensor 2015-05-10 20:31:48 +01:00
lm3533-als.c iio: light: lm3533-als: Remove space before ',' 2015-01-01 12:14:36 +00:00
ltr501.c iio: ltr501: Add light channel support 2015-05-17 09:14:10 +01:00
Makefile iio: acpi: Add support for ACPI0008 Ambient Light Sensor 2015-05-10 20:31:48 +01:00
stk3310.c iio: light: signedness bug in stk3310_write_raw() 2015-06-01 16:57:23 +01:00
tcs3414.c iio: light: tcs3414: Fix misindented lines 2015-01-25 22:53:46 +00:00
tcs3472.c iio:tcs3472: Check for buffer enabled and locking 2014-07-07 08:59:16 +01:00
tsl2563.c iio:tsl2563: Use tsl2563_ prefix for driver's functions 2015-04-18 20:35:31 +01:00
tsl4531.c iio:tsl4531: Fix leftover TCS3472_ prefix in tsl4531 driver 2015-04-18 20:31:35 +01:00
vcnl4000.c