kernel-fxtec-pro1x/arch/ppc64/kernel/iSeries_pci.c
Stephen Rothwell 061c063efc [PATCH] ppc64 iSeries: remove some more members of iSeries_Device_Node
The AgentId, PhbId, FrameId, CardLocation and Location members of
iSeries_Device_Node are stored early in the boot process just so that a
message about the device can be printed later in the boot process.  Remove
them and construct the message by doing the VPD parsing at the time the
message is printed.

Also remove a few unused defines in iSeries_VpdInfo.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:30 -07:00

905 lines
24 KiB
C

/*
* iSeries_pci.c
*
* Copyright (C) 2001 Allan Trautman, IBM Corporation
*
* iSeries specific routines for PCI.
*
* Based on code from pci.c and iSeries_pci.c 32bit
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/iSeries/HvCallPci.h>
#include <asm/iSeries/HvCallXm.h>
#include <asm/iSeries/iSeries_irq.h>
#include <asm/iSeries/iSeries_pci.h>
#include <asm/iSeries/mf.h>
#include "pci.h"
extern unsigned long io_page_mask;
/*
* Forward declares of prototypes.
*/
static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn);
static void scan_PHB_slots(struct pci_controller *Phb);
static void scan_EADS_bridge(HvBusNumber Bus, HvSubBusNumber SubBus, int IdSel);
static int scan_bridge_slot(HvBusNumber Bus, struct HvCallPci_BridgeInfo *Info);
LIST_HEAD(iSeries_Global_Device_List);
static int DeviceCount;
/* Counters and control flags. */
static long Pci_Io_Read_Count;
static long Pci_Io_Write_Count;
#if 0
static long Pci_Cfg_Read_Count;
static long Pci_Cfg_Write_Count;
#endif
static long Pci_Error_Count;
static int Pci_Retry_Max = 3; /* Only retry 3 times */
static int Pci_Error_Flag = 1; /* Set Retry Error on. */
static struct pci_ops iSeries_pci_ops;
/*
* Table defines
* Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space.
*/
#define IOMM_TABLE_MAX_ENTRIES 1024
#define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL
#define BASE_IO_MEMORY 0xE000000000000000UL
static unsigned long max_io_memory = 0xE000000000000000UL;
static long current_iomm_table_entry;
/*
* Lookup Tables.
*/
static struct iSeries_Device_Node **iomm_table;
static u8 *iobar_table;
/*
* Static and Global variables
*/
static char *pci_io_text = "iSeries PCI I/O";
static DEFINE_SPINLOCK(iomm_table_lock);
/*
* iomm_table_initialize
*
* Allocates and initalizes the Address Translation Table and Bar
* Tables to get them ready for use. Must be called before any
* I/O space is handed out to the device BARs.
*/
static void iomm_table_initialize(void)
{
spin_lock(&iomm_table_lock);
iomm_table = kmalloc(sizeof(*iomm_table) * IOMM_TABLE_MAX_ENTRIES,
GFP_KERNEL);
iobar_table = kmalloc(sizeof(*iobar_table) * IOMM_TABLE_MAX_ENTRIES,
GFP_KERNEL);
spin_unlock(&iomm_table_lock);
if ((iomm_table == NULL) || (iobar_table == NULL))
panic("PCI: I/O tables allocation failed.\n");
}
/*
* iomm_table_allocate_entry
*
* Adds pci_dev entry in address translation table
*
* - Allocates the number of entries required in table base on BAR
* size.
* - Allocates starting at BASE_IO_MEMORY and increases.
* - The size is round up to be a multiple of entry size.
* - CurrentIndex is incremented to keep track of the last entry.
* - Builds the resource entry for allocated BARs.
*/
static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
{
struct resource *bar_res = &dev->resource[bar_num];
long bar_size = pci_resource_len(dev, bar_num);
/*
* No space to allocate, quick exit, skip Allocation.
*/
if (bar_size == 0)
return;
/*
* Set Resource values.
*/
spin_lock(&iomm_table_lock);
bar_res->name = pci_io_text;
bar_res->start =
IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
bar_res->start += BASE_IO_MEMORY;
bar_res->end = bar_res->start + bar_size - 1;
/*
* Allocate the number of table entries needed for BAR.
*/
while (bar_size > 0 ) {
iomm_table[current_iomm_table_entry] = dev->sysdata;
iobar_table[current_iomm_table_entry] = bar_num;
bar_size -= IOMM_TABLE_ENTRY_SIZE;
++current_iomm_table_entry;
}
max_io_memory = BASE_IO_MEMORY +
(IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry);
spin_unlock(&iomm_table_lock);
}
/*
* allocate_device_bars
*
* - Allocates ALL pci_dev BAR's and updates the resources with the
* BAR value. BARS with zero length will have the resources
* The HvCallPci_getBarParms is used to get the size of the BAR
* space. It calls iomm_table_allocate_entry to allocate
* each entry.
* - Loops through The Bar resources(0 - 5) including the ROM
* is resource(6).
*/
static void allocate_device_bars(struct pci_dev *dev)
{
struct resource *bar_res;
int bar_num;
for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) {
bar_res = &dev->resource[bar_num];
iomm_table_allocate_entry(dev, bar_num);
}
}
/*
* Log error information to system console.
* Filter out the device not there errors.
* PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx
* PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
* PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
*/
static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
int AgentId, int HvRc)
{
if (HvRc == 0x0302)
return;
printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
Error_Text, Bus, SubBus, AgentId, HvRc);
}
/*
* build_device_node(u16 Bus, int SubBus, u8 DevFn)
*/
static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus,
HvSubBusNumber SubBus, int AgentId, int Function)
{
struct iSeries_Device_Node *node;
PPCDBG(PPCDBG_BUSWALK,
"-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
Bus, SubBus, AgentId, Function);
node = kmalloc(sizeof(struct iSeries_Device_Node), GFP_KERNEL);
if (node == NULL)
return NULL;
memset(node, 0, sizeof(struct iSeries_Device_Node));
list_add_tail(&node->Device_List, &iSeries_Global_Device_List);
#if 0
node->DsaAddr = ((u64)Bus << 48) + ((u64)SubBus << 40) + ((u64)0x10 << 32);
#endif
node->DsaAddr.DsaAddr = 0;
node->DsaAddr.Dsa.busNumber = Bus;
node->DsaAddr.Dsa.subBusNumber = SubBus;
node->DsaAddr.Dsa.deviceId = 0x10;
node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function);
return node;
}
/*
* unsigned long __init find_and_init_phbs(void)
*
* Description:
* This function checks for all possible system PCI host bridges that connect
* PCI buses. The system hypervisor is queried as to the guest partition
* ownership status. A pci_controller is built for any bus which is partially
* owned or fully owned by this guest partition.
*/
unsigned long __init find_and_init_phbs(void)
{
struct pci_controller *phb;
HvBusNumber bus;
PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
/* Check all possible buses. */
for (bus = 0; bus < 256; bus++) {
int ret = HvCallXm_testBus(bus);
if (ret == 0) {
printk("bus %d appears to exist\n", bus);
phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
if (phb == NULL)
return -ENOMEM;
pci_setup_pci_controller(phb);
phb->pci_mem_offset = phb->local_number = bus;
phb->first_busno = bus;
phb->last_busno = bus;
phb->ops = &iSeries_pci_ops;
PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
phb, bus);
/* Find and connect the devices. */
scan_PHB_slots(phb);
}
/*
* Check for Unexpected Return code, a clue that something
* has gone wrong.
*/
else if (ret != 0x0301)
printk(KERN_ERR "Unexpected Return on Probe(0x%04X): 0x%04X",
bus, ret);
}
return 0;
}
/*
* iSeries_pcibios_init
*
* Chance to initialize and structures or variable before PCI Bus walk.
*/
void iSeries_pcibios_init(void)
{
PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n");
iomm_table_initialize();
find_and_init_phbs();
io_page_mask = -1;
PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n");
}
/*
* iSeries_pci_final_fixup(void)
*/
void __init iSeries_pci_final_fixup(void)
{
struct pci_dev *pdev = NULL;
struct iSeries_Device_Node *node;
int DeviceCount = 0;
PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n");
/* Fix up at the device node and pci_dev relationship */
mf_display_src(0xC9000100);
printk("pcibios_final_fixup\n");
for_each_pci_dev(pdev) {
node = find_Device_Node(pdev->bus->number, pdev->devfn);
printk("pci dev %p (%x.%x), node %p\n", pdev,
pdev->bus->number, pdev->devfn, node);
if (node != NULL) {
++DeviceCount;
pdev->sysdata = (void *)node;
node->PciDev = pdev;
PPCDBG(PPCDBG_BUSWALK,
"pdev 0x%p <==> DevNode 0x%p\n",
pdev, node);
allocate_device_bars(pdev);
iSeries_Device_Information(pdev, DeviceCount);
iommu_devnode_init_iSeries(node);
} else
printk("PCI: Device Tree not found for 0x%016lX\n",
(unsigned long)pdev);
pdev->irq = node->Irq;
}
iSeries_activate_IRQs();
mf_display_src(0xC9000200);
}
void pcibios_fixup_bus(struct pci_bus *PciBus)
{
PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
PciBus->number);
}
void pcibios_fixup_resources(struct pci_dev *pdev)
{
PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
}
/*
* Loop through each node function to find usable EADs bridges.
*/
static void scan_PHB_slots(struct pci_controller *Phb)
{
struct HvCallPci_DeviceInfo *DevInfo;
HvBusNumber bus = Phb->local_number; /* System Bus */
const HvSubBusNumber SubBus = 0; /* EADs is always 0. */
int HvRc = 0;
int IdSel;
const int MaxAgents = 8;
DevInfo = (struct HvCallPci_DeviceInfo*)
kmalloc(sizeof(struct HvCallPci_DeviceInfo), GFP_KERNEL);
if (DevInfo == NULL)
return;
/*
* Probe for EADs Bridges
*/
for (IdSel = 1; IdSel < MaxAgents; ++IdSel) {
HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel,
ISERIES_HV_ADDR(DevInfo),
sizeof(struct HvCallPci_DeviceInfo));
if (HvRc == 0) {
if (DevInfo->deviceType == HvCallPci_NodeDevice)
scan_EADS_bridge(bus, SubBus, IdSel);
else
printk("PCI: Invalid System Configuration(0x%02X)"
" for bus 0x%02x id 0x%02x.\n",
DevInfo->deviceType, bus, IdSel);
}
else
pci_Log_Error("getDeviceInfo", bus, SubBus, IdSel, HvRc);
}
kfree(DevInfo);
}
static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
int IdSel)
{
struct HvCallPci_BridgeInfo *BridgeInfo;
HvAgentId AgentId;
int Function;
int HvRc;
BridgeInfo = (struct HvCallPci_BridgeInfo *)
kmalloc(sizeof(struct HvCallPci_BridgeInfo), GFP_KERNEL);
if (BridgeInfo == NULL)
return;
/* Note: hvSubBus and irq is always be 0 at this level! */
for (Function = 0; Function < 8; ++Function) {
AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
HvRc = HvCallXm_connectBusUnit(bus, SubBus, AgentId, 0);
if (HvRc == 0) {
printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
bus, IdSel, Function, AgentId);
/* Connect EADs: 0x18.00.12 = 0x00 */
PPCDBG(PPCDBG_BUSWALK,
"PCI:Connect EADs: 0x%02X.%02X.%02X\n",
bus, SubBus, AgentId);
HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
ISERIES_HV_ADDR(BridgeInfo),
sizeof(struct HvCallPci_BridgeInfo));
if (HvRc == 0) {
printk("bridge info: type %x subbus %x maxAgents %x maxsubbus %x logslot %x\n",
BridgeInfo->busUnitInfo.deviceType,
BridgeInfo->subBusNumber,
BridgeInfo->maxAgents,
BridgeInfo->maxSubBusNumber,
BridgeInfo->logicalSlotNumber);
PPCDBG(PPCDBG_BUSWALK,
"PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
BridgeInfo->busUnitInfo.deviceType,
BridgeInfo->subBusNumber,
BridgeInfo->maxAgents,
BridgeInfo->maxSubBusNumber,
BridgeInfo->logicalSlotNumber);
if (BridgeInfo->busUnitInfo.deviceType ==
HvCallPci_BridgeDevice) {
/* Scan_Bridge_Slot...: 0x18.00.12 */
scan_bridge_slot(bus, BridgeInfo);
} else
printk("PCI: Invalid Bridge Configuration(0x%02X)",
BridgeInfo->busUnitInfo.deviceType);
}
} else if (HvRc != 0x000B)
pci_Log_Error("EADs Connect",
bus, SubBus, AgentId, HvRc);
}
kfree(BridgeInfo);
}
/*
* This assumes that the node slot is always on the primary bus!
*/
static int scan_bridge_slot(HvBusNumber Bus,
struct HvCallPci_BridgeInfo *BridgeInfo)
{
struct iSeries_Device_Node *node;
HvSubBusNumber SubBus = BridgeInfo->subBusNumber;
u16 VendorId = 0;
int HvRc = 0;
u8 Irq = 0;
int IdSel = ISERIES_GET_DEVICE_FROM_SUBBUS(SubBus);
int Function = ISERIES_GET_FUNCTION_FROM_SUBBUS(SubBus);
HvAgentId EADsIdSel = ISERIES_PCI_AGENTID(IdSel, Function);
/* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
PPCDBG(PPCDBG_BUSWALK,
"PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
Bus, 0, EADsIdSel, Irq);
/*
* Connect all functions of any device found.
*/
for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) {
for (Function = 0; Function < 8; ++Function) {
HvAgentId AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
HvRc = HvCallXm_connectBusUnit(Bus, SubBus,
AgentId, Irq);
if (HvRc != 0) {
pci_Log_Error("Connect Bus Unit",
Bus, SubBus, AgentId, HvRc);
continue;
}
HvRc = HvCallPci_configLoad16(Bus, SubBus, AgentId,
PCI_VENDOR_ID, &VendorId);
if (HvRc != 0) {
pci_Log_Error("Read Vendor",
Bus, SubBus, AgentId, HvRc);
continue;
}
printk("read vendor ID: %x\n", VendorId);
/* FoundDevice: 0x18.28.10 = 0x12AE */
PPCDBG(PPCDBG_BUSWALK,
"PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
Bus, SubBus, AgentId, VendorId, Irq);
HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
PCI_INTERRUPT_LINE, Irq);
if (HvRc != 0)
pci_Log_Error("PciCfgStore Irq Failed!",
Bus, SubBus, AgentId, HvRc);
++DeviceCount;
node = build_device_node(Bus, SubBus, EADsIdSel, Function);
node->Irq = Irq;
node->LogicalSlot = BridgeInfo->logicalSlotNumber;
} /* for (Function = 0; Function < 8; ++Function) */
} /* for (IdSel = 1; IdSel <= MaxAgents; ++IdSel) */
return HvRc;
}
/*
* I/0 Memory copy MUST use mmio commands on iSeries
* To do; For performance, include the hv call directly
*/
void iSeries_memset_io(volatile void __iomem *dest, char c, size_t Count)
{
u8 ByteValue = c;
long NumberOfBytes = Count;
while (NumberOfBytes > 0) {
iSeries_Write_Byte(ByteValue, dest++);
-- NumberOfBytes;
}
}
EXPORT_SYMBOL(iSeries_memset_io);
void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t count)
{
char *src = source;
long NumberOfBytes = count;
while (NumberOfBytes > 0) {
iSeries_Write_Byte(*src++, dest++);
-- NumberOfBytes;
}
}
EXPORT_SYMBOL(iSeries_memcpy_toio);
void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *src, size_t count)
{
char *dst = dest;
long NumberOfBytes = count;
while (NumberOfBytes > 0) {
*dst++ = iSeries_Read_Byte(src++);
-- NumberOfBytes;
}
}
EXPORT_SYMBOL(iSeries_memcpy_fromio);
/*
* Look down the chain to find the matching Device Device
*/
static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn)
{
struct list_head *pos;
list_for_each(pos, &iSeries_Global_Device_List) {
struct iSeries_Device_Node *node =
list_entry(pos, struct iSeries_Device_Node, Device_List);
if ((bus == ISERIES_BUS(node)) && (devfn == node->DevFn))
return node;
}
return NULL;
}
#if 0
/*
* Returns the device node for the passed pci_dev
* Sanity Check Node PciDev to passed pci_dev
* If none is found, returns a NULL which the client must handle.
*/
static struct iSeries_Device_Node *get_Device_Node(struct pci_dev *pdev)
{
struct iSeries_Device_Node *node;
node = pdev->sysdata;
if (node == NULL || node->PciDev != pdev)
node = find_Device_Node(pdev->bus->number, pdev->devfn);
return node;
}
#endif
/*
* Config space read and write functions.
* For now at least, we look for the device node for the bus and devfn
* that we are asked to access. It may be possible to translate the devfn
* to a subbus and deviceid more directly.
*/
static u64 hv_cfg_read_func[4] = {
HvCallPciConfigLoad8, HvCallPciConfigLoad16,
HvCallPciConfigLoad32, HvCallPciConfigLoad32
};
static u64 hv_cfg_write_func[4] = {
HvCallPciConfigStore8, HvCallPciConfigStore16,
HvCallPciConfigStore32, HvCallPciConfigStore32
};
/*
* Read PCI config space
*/
static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int size, u32 *val)
{
struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
u64 fn;
struct HvCallPci_LoadReturn ret;
if (node == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset > 255) {
*val = ~0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
fn = hv_cfg_read_func[(size - 1) & 3];
HvCall3Ret16(fn, &ret, node->DsaAddr.DsaAddr, offset, 0);
if (ret.rc != 0) {
*val = ~0;
return PCIBIOS_DEVICE_NOT_FOUND; /* or something */
}
*val = ret.value;
return 0;
}
/*
* Write PCI config space
*/
static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int size, u32 val)
{
struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
u64 fn;
u64 ret;
if (node == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset > 255)
return PCIBIOS_BAD_REGISTER_NUMBER;
fn = hv_cfg_write_func[(size - 1) & 3];
ret = HvCall4(fn, node->DsaAddr.DsaAddr, offset, val, 0);
if (ret != 0)
return PCIBIOS_DEVICE_NOT_FOUND;
return 0;
}
static struct pci_ops iSeries_pci_ops = {
.read = iSeries_pci_read_config,
.write = iSeries_pci_write_config
};
/*
* Check Return Code
* -> On Failure, print and log information.
* Increment Retry Count, if exceeds max, panic partition.
*
* PCI: Device 23.90 ReadL I/O Error( 0): 0x1234
* PCI: Device 23.90 ReadL Retry( 1)
* PCI: Device 23.90 ReadL Retry Successful(1)
*/
static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode,
int *retry, u64 ret)
{
if (ret != 0) {
++Pci_Error_Count;
(*retry)++;
printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n",
TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn,
*retry, (int)ret);
/*
* Bump the retry and check for retry count exceeded.
* If, Exceeded, panic the system.
*/
if (((*retry) > Pci_Retry_Max) &&
(Pci_Error_Flag > 0)) {
mf_display_src(0xB6000103);
panic_timeout = 0;
panic("PCI: Hardware I/O Error, SRC B6000103, "
"Automatic Reboot Disabled.\n");
}
return -1; /* Retry Try */
}
return 0;
}
/*
* Translate the I/O Address into a device node, bar, and bar offset.
* Note: Make sure the passed variable end up on the stack to avoid
* the exposure of being device global.
*/
static inline struct iSeries_Device_Node *xlate_iomm_address(
const volatile void __iomem *IoAddress,
u64 *dsaptr, u64 *BarOffsetPtr)
{
unsigned long OrigIoAddr;
unsigned long BaseIoAddr;
unsigned long TableIndex;
struct iSeries_Device_Node *DevNode;
OrigIoAddr = (unsigned long __force)IoAddress;
if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
return NULL;
BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY;
TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE;
DevNode = iomm_table[TableIndex];
if (DevNode != NULL) {
int barnum = iobar_table[TableIndex];
*dsaptr = DevNode->DsaAddr.DsaAddr | (barnum << 24);
*BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
} else
panic("PCI: Invalid PCI IoAddress detected!\n");
return DevNode;
}
/*
* Read MM I/O Instructions for the iSeries
* On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
* else, data is returned in big Endian format.
*
* iSeries_Read_Byte = Read Byte ( 8 bit)
* iSeries_Read_Word = Read Word (16 bit)
* iSeries_Read_Long = Read Long (32 bit)
*/
u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
struct HvCallPci_LoadReturn ret;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress);
return 0xff;
}
do {
++Pci_Io_Read_Count;
HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0);
} while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0);
return (u8)ret.value;
}
EXPORT_SYMBOL(iSeries_Read_Byte);
u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
struct HvCallPci_LoadReturn ret;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress);
return 0xffff;
}
do {
++Pci_Io_Read_Count;
HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
BarOffset, 0);
} while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0);
return swab16((u16)ret.value);
}
EXPORT_SYMBOL(iSeries_Read_Word);
u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
struct HvCallPci_LoadReturn ret;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress);
return 0xffffffff;
}
do {
++Pci_Io_Read_Count;
HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
BarOffset, 0);
} while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0);
return swab32((u32)ret.value);
}
EXPORT_SYMBOL(iSeries_Read_Long);
/*
* Write MM I/O Instructions for the iSeries
*
* iSeries_Write_Byte = Write Byte (8 bit)
* iSeries_Write_Word = Write Word(16 bit)
* iSeries_Write_Long = Write Long(32 bit)
*/
void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
u64 rc;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress);
return;
}
do {
++Pci_Io_Write_Count;
rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0);
} while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Byte);
void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
u64 rc;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress);
return;
}
do {
++Pci_Io_Write_Count;
rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0);
} while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Word);
void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
{
u64 BarOffset;
u64 dsa;
int retry = 0;
u64 rc;
struct iSeries_Device_Node *DevNode =
xlate_iomm_address(IoAddress, &dsa, &BarOffset);
if (DevNode == NULL) {
static unsigned long last_jiffies;
static int num_printed;
if ((jiffies - last_jiffies) > 60 * HZ) {
last_jiffies = jiffies;
num_printed = 0;
}
if (num_printed++ < 10)
printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress);
return;
}
do {
++Pci_Io_Write_Count;
rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0);
} while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0);
}
EXPORT_SYMBOL(iSeries_Write_Long);