959d20bfe8
This patch adds documentation for the MSCAN OF device bindings for the MPC512x and moves the one for the MPC5200 to the new common file "Documentation/powerpc/dts-bindings/fsl/can.txt". Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
53 lines
1.6 KiB
Text
53 lines
1.6 KiB
Text
CAN Device Tree Bindings
|
|
------------------------
|
|
|
|
(c) 2006-2009 Secret Lab Technologies Ltd
|
|
Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
fsl,mpc5200-mscan nodes
|
|
-----------------------
|
|
In addition to the required compatible-, reg- and interrupt-properties, you can
|
|
also specify which clock source shall be used for the controller:
|
|
|
|
- fsl,mscan-clock-source : a string describing the clock source. Valid values
|
|
are: "ip" for ip bus clock
|
|
"ref" for reference clock (XTAL)
|
|
"ref" is default in case this property is not
|
|
present.
|
|
|
|
fsl,mpc5121-mscan nodes
|
|
-----------------------
|
|
In addition to the required compatible-, reg- and interrupt-properties, you can
|
|
also specify which clock source and divider shall be used for the controller:
|
|
|
|
- fsl,mscan-clock-source : a string describing the clock source. Valid values
|
|
are: "ip" for ip bus clock
|
|
"ref" for reference clock
|
|
"sys" for system clock
|
|
If this property is not present, an optimal CAN
|
|
clock source and frequency based on the system
|
|
clock will be selected. If this is not possible,
|
|
the reference clock will be used.
|
|
|
|
- fsl,mscan-clock-divider: for the reference and system clock, an additional
|
|
clock divider can be specified. By default, a
|
|
value of 1 is used.
|
|
|
|
Note that the MPC5121 Rev. 1 processor is not supported.
|
|
|
|
Examples:
|
|
can@1300 {
|
|
compatible = "fsl,mpc5121-mscan";
|
|
interrupts = <12 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
reg = <0x1300 0x80>;
|
|
};
|
|
|
|
can@1380 {
|
|
compatible = "fsl,mpc5121-mscan";
|
|
interrupts = <13 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
reg = <0x1380 0x80>;
|
|
fsl,mscan-clock-source = "ref";
|
|
fsl,mscan-clock-divider = <3>;
|
|
};
|