698b368275
This just adds the refcount and the new registration lock logic. It does not (for example) actually change the read/write/ioctl routines to actually use the frame buffer that was opened: those function still end up alway susing whatever the current frame buffer is at the time of the call. Without this, if something holds the frame buffer open over a framebuffer switch, the close() operation after the switch will access a fb_info that has been free'd by the unregistering of the old frame buffer. (The read/write/ioctl operations will normally not cause problems, because they will - illogically - pick up the new fbcon instead. But a switch that happens just as one of those is going on might see problems too, the window is just much smaller: one individual op rather than the whole open-close sequence.) This use-after-free is apparently fairly easily triggered by the Ubuntu 11.04 boot sequence. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1174 lines
43 KiB
C
1174 lines
43 KiB
C
#ifndef _LINUX_FB_H
|
|
#define _LINUX_FB_H
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/i2c.h>
|
|
#ifdef __KERNEL__
|
|
#include <linux/kgdb.h>
|
|
#endif /* __KERNEL__ */
|
|
|
|
/* Definitions of frame buffers */
|
|
|
|
#define FB_MAX 32 /* sufficient for now */
|
|
|
|
/* ioctls
|
|
0x46 is 'F' */
|
|
#define FBIOGET_VSCREENINFO 0x4600
|
|
#define FBIOPUT_VSCREENINFO 0x4601
|
|
#define FBIOGET_FSCREENINFO 0x4602
|
|
#define FBIOGETCMAP 0x4604
|
|
#define FBIOPUTCMAP 0x4605
|
|
#define FBIOPAN_DISPLAY 0x4606
|
|
#ifdef __KERNEL__
|
|
#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user)
|
|
#else
|
|
#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor)
|
|
#endif
|
|
/* 0x4607-0x460B are defined below */
|
|
/* #define FBIOGET_MONITORSPEC 0x460C */
|
|
/* #define FBIOPUT_MONITORSPEC 0x460D */
|
|
/* #define FBIOSWITCH_MONIBIT 0x460E */
|
|
#define FBIOGET_CON2FBMAP 0x460F
|
|
#define FBIOPUT_CON2FBMAP 0x4610
|
|
#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */
|
|
#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank)
|
|
#define FBIO_ALLOC 0x4613
|
|
#define FBIO_FREE 0x4614
|
|
#define FBIOGET_GLYPH 0x4615
|
|
#define FBIOGET_HWCINFO 0x4616
|
|
#define FBIOPUT_MODEINFO 0x4617
|
|
#define FBIOGET_DISPINFO 0x4618
|
|
#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
|
|
|
|
#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */
|
|
#define FB_TYPE_PLANES 1 /* Non interleaved planes */
|
|
#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */
|
|
#define FB_TYPE_TEXT 3 /* Text/attributes */
|
|
#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */
|
|
|
|
#define FB_AUX_TEXT_MDA 0 /* Monochrome text */
|
|
#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */
|
|
#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */
|
|
#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */
|
|
#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */
|
|
#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */
|
|
#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */
|
|
#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */
|
|
#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */
|
|
#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */
|
|
#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */
|
|
#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */
|
|
|
|
#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */
|
|
#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */
|
|
#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */
|
|
|
|
#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */
|
|
#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */
|
|
#define FB_VISUAL_TRUECOLOR 2 /* True color */
|
|
#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */
|
|
#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */
|
|
#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */
|
|
|
|
#define FB_ACCEL_NONE 0 /* no hardware accelerator */
|
|
#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */
|
|
#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */
|
|
#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */
|
|
#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */
|
|
#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */
|
|
#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */
|
|
#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */
|
|
#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */
|
|
#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */
|
|
#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */
|
|
#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */
|
|
#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */
|
|
#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */
|
|
#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */
|
|
#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */
|
|
#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */
|
|
#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */
|
|
#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */
|
|
#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */
|
|
#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */
|
|
#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */
|
|
#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */
|
|
#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */
|
|
#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */
|
|
#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */
|
|
#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */
|
|
#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */
|
|
#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */
|
|
#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */
|
|
#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */
|
|
#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */
|
|
#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */
|
|
#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */
|
|
#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */
|
|
#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */
|
|
#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */
|
|
#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */
|
|
#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */
|
|
#define FB_ACCEL_I810 39 /* Intel 810/815 */
|
|
#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */
|
|
#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */
|
|
#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */
|
|
#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */
|
|
#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */
|
|
#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */
|
|
#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */
|
|
#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */
|
|
#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */
|
|
#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */
|
|
#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */
|
|
#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */
|
|
#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
|
|
#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
|
|
#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
|
|
#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
|
|
#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
|
|
|
|
#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
|
|
#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
|
|
#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */
|
|
#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */
|
|
#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */
|
|
#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */
|
|
#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */
|
|
#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */
|
|
#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */
|
|
#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */
|
|
#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */
|
|
#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */
|
|
#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */
|
|
#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
|
|
#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
|
|
|
|
#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
|
|
|
|
struct fb_fix_screeninfo {
|
|
char id[16]; /* identification string eg "TT Builtin" */
|
|
unsigned long smem_start; /* Start of frame buffer mem */
|
|
/* (physical address) */
|
|
__u32 smem_len; /* Length of frame buffer mem */
|
|
__u32 type; /* see FB_TYPE_* */
|
|
__u32 type_aux; /* Interleave for interleaved Planes */
|
|
__u32 visual; /* see FB_VISUAL_* */
|
|
__u16 xpanstep; /* zero if no hardware panning */
|
|
__u16 ypanstep; /* zero if no hardware panning */
|
|
__u16 ywrapstep; /* zero if no hardware ywrap */
|
|
__u32 line_length; /* length of a line in bytes */
|
|
unsigned long mmio_start; /* Start of Memory Mapped I/O */
|
|
/* (physical address) */
|
|
__u32 mmio_len; /* Length of Memory Mapped I/O */
|
|
__u32 accel; /* Indicate to driver which */
|
|
/* specific chip/card we have */
|
|
__u16 reserved[3]; /* Reserved for future compatibility */
|
|
};
|
|
|
|
/* Interpretation of offset for color fields: All offsets are from the right,
|
|
* inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
|
|
* can use the offset as right argument to <<). A pixel afterwards is a bit
|
|
* stream and is written to video memory as that unmodified.
|
|
*
|
|
* For pseudocolor: offset and length should be the same for all color
|
|
* components. Offset specifies the position of the least significant bit
|
|
* of the pallette index in a pixel value. Length indicates the number
|
|
* of available palette entries (i.e. # of entries = 1 << length).
|
|
*/
|
|
struct fb_bitfield {
|
|
__u32 offset; /* beginning of bitfield */
|
|
__u32 length; /* length of bitfield */
|
|
__u32 msb_right; /* != 0 : Most significant bit is */
|
|
/* right */
|
|
};
|
|
|
|
#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
|
|
#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */
|
|
|
|
#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/
|
|
#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */
|
|
#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */
|
|
#define FB_ACTIVATE_MASK 15
|
|
/* values */
|
|
#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */
|
|
#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */
|
|
#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */
|
|
#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/
|
|
#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */
|
|
|
|
#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */
|
|
|
|
#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
|
|
#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
|
|
#define FB_SYNC_EXT 4 /* external sync */
|
|
#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
|
|
#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
|
|
/* vtotal = 144d/288n/576i => PAL */
|
|
/* vtotal = 121d/242n/484i => NTSC */
|
|
#define FB_SYNC_ON_GREEN 32 /* sync on green */
|
|
|
|
#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
|
|
#define FB_VMODE_INTERLACED 1 /* interlaced */
|
|
#define FB_VMODE_DOUBLE 2 /* double scan */
|
|
#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */
|
|
#define FB_VMODE_MASK 255
|
|
|
|
#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
|
|
#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
|
|
#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
|
|
|
|
/*
|
|
* Display rotation support
|
|
*/
|
|
#define FB_ROTATE_UR 0
|
|
#define FB_ROTATE_CW 1
|
|
#define FB_ROTATE_UD 2
|
|
#define FB_ROTATE_CCW 3
|
|
|
|
#define PICOS2KHZ(a) (1000000000UL/(a))
|
|
#define KHZ2PICOS(a) (1000000000UL/(a))
|
|
|
|
struct fb_var_screeninfo {
|
|
__u32 xres; /* visible resolution */
|
|
__u32 yres;
|
|
__u32 xres_virtual; /* virtual resolution */
|
|
__u32 yres_virtual;
|
|
__u32 xoffset; /* offset from virtual to visible */
|
|
__u32 yoffset; /* resolution */
|
|
|
|
__u32 bits_per_pixel; /* guess what */
|
|
__u32 grayscale; /* != 0 Graylevels instead of colors */
|
|
|
|
struct fb_bitfield red; /* bitfield in fb mem if true color, */
|
|
struct fb_bitfield green; /* else only length is significant */
|
|
struct fb_bitfield blue;
|
|
struct fb_bitfield transp; /* transparency */
|
|
|
|
__u32 nonstd; /* != 0 Non standard pixel format */
|
|
|
|
__u32 activate; /* see FB_ACTIVATE_* */
|
|
|
|
__u32 height; /* height of picture in mm */
|
|
__u32 width; /* width of picture in mm */
|
|
|
|
__u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
|
|
|
|
/* Timing: All values in pixclocks, except pixclock (of course) */
|
|
__u32 pixclock; /* pixel clock in ps (pico seconds) */
|
|
__u32 left_margin; /* time from sync to picture */
|
|
__u32 right_margin; /* time from picture to sync */
|
|
__u32 upper_margin; /* time from sync to picture */
|
|
__u32 lower_margin;
|
|
__u32 hsync_len; /* length of horizontal sync */
|
|
__u32 vsync_len; /* length of vertical sync */
|
|
__u32 sync; /* see FB_SYNC_* */
|
|
__u32 vmode; /* see FB_VMODE_* */
|
|
__u32 rotate; /* angle we rotate counter clockwise */
|
|
__u32 reserved[5]; /* Reserved for future compatibility */
|
|
};
|
|
|
|
struct fb_cmap {
|
|
__u32 start; /* First entry */
|
|
__u32 len; /* Number of entries */
|
|
__u16 *red; /* Red values */
|
|
__u16 *green;
|
|
__u16 *blue;
|
|
__u16 *transp; /* transparency, can be NULL */
|
|
};
|
|
|
|
struct fb_con2fbmap {
|
|
__u32 console;
|
|
__u32 framebuffer;
|
|
};
|
|
|
|
/* VESA Blanking Levels */
|
|
#define VESA_NO_BLANKING 0
|
|
#define VESA_VSYNC_SUSPEND 1
|
|
#define VESA_HSYNC_SUSPEND 2
|
|
#define VESA_POWERDOWN 3
|
|
|
|
|
|
enum {
|
|
/* screen: unblanked, hsync: on, vsync: on */
|
|
FB_BLANK_UNBLANK = VESA_NO_BLANKING,
|
|
|
|
/* screen: blanked, hsync: on, vsync: on */
|
|
FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
|
|
|
|
/* screen: blanked, hsync: on, vsync: off */
|
|
FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
|
|
|
|
/* screen: blanked, hsync: off, vsync: on */
|
|
FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
|
|
|
|
/* screen: blanked, hsync: off, vsync: off */
|
|
FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1
|
|
};
|
|
|
|
#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */
|
|
#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */
|
|
#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */
|
|
#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */
|
|
#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */
|
|
#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */
|
|
#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */
|
|
#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */
|
|
#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */
|
|
|
|
struct fb_vblank {
|
|
__u32 flags; /* FB_VBLANK flags */
|
|
__u32 count; /* counter of retraces since boot */
|
|
__u32 vcount; /* current scanline position */
|
|
__u32 hcount; /* current scandot position */
|
|
__u32 reserved[4]; /* reserved for future compatibility */
|
|
};
|
|
|
|
/* Internal HW accel */
|
|
#define ROP_COPY 0
|
|
#define ROP_XOR 1
|
|
|
|
struct fb_copyarea {
|
|
__u32 dx;
|
|
__u32 dy;
|
|
__u32 width;
|
|
__u32 height;
|
|
__u32 sx;
|
|
__u32 sy;
|
|
};
|
|
|
|
struct fb_fillrect {
|
|
__u32 dx; /* screen-relative */
|
|
__u32 dy;
|
|
__u32 width;
|
|
__u32 height;
|
|
__u32 color;
|
|
__u32 rop;
|
|
};
|
|
|
|
struct fb_image {
|
|
__u32 dx; /* Where to place image */
|
|
__u32 dy;
|
|
__u32 width; /* Size of image */
|
|
__u32 height;
|
|
__u32 fg_color; /* Only used when a mono bitmap */
|
|
__u32 bg_color;
|
|
__u8 depth; /* Depth of the image */
|
|
const char *data; /* Pointer to image data */
|
|
struct fb_cmap cmap; /* color map info */
|
|
};
|
|
|
|
/*
|
|
* hardware cursor control
|
|
*/
|
|
|
|
#define FB_CUR_SETIMAGE 0x01
|
|
#define FB_CUR_SETPOS 0x02
|
|
#define FB_CUR_SETHOT 0x04
|
|
#define FB_CUR_SETCMAP 0x08
|
|
#define FB_CUR_SETSHAPE 0x10
|
|
#define FB_CUR_SETSIZE 0x20
|
|
#define FB_CUR_SETALL 0xFF
|
|
|
|
struct fbcurpos {
|
|
__u16 x, y;
|
|
};
|
|
|
|
struct fb_cursor {
|
|
__u16 set; /* what to set */
|
|
__u16 enable; /* cursor on/off */
|
|
__u16 rop; /* bitop operation */
|
|
const char *mask; /* cursor mask bits */
|
|
struct fbcurpos hot; /* cursor hot spot */
|
|
struct fb_image image; /* Cursor image */
|
|
};
|
|
|
|
#ifdef CONFIG_FB_BACKLIGHT
|
|
/* Settings for the generic backlight code */
|
|
#define FB_BACKLIGHT_LEVELS 128
|
|
#define FB_BACKLIGHT_MAX 0xFF
|
|
#endif
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/list.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/io.h>
|
|
|
|
struct vm_area_struct;
|
|
struct fb_info;
|
|
struct device;
|
|
struct file;
|
|
|
|
/* Definitions below are used in the parsed monitor specs */
|
|
#define FB_DPMS_ACTIVE_OFF 1
|
|
#define FB_DPMS_SUSPEND 2
|
|
#define FB_DPMS_STANDBY 4
|
|
|
|
#define FB_DISP_DDI 1
|
|
#define FB_DISP_ANA_700_300 2
|
|
#define FB_DISP_ANA_714_286 4
|
|
#define FB_DISP_ANA_1000_400 8
|
|
#define FB_DISP_ANA_700_000 16
|
|
|
|
#define FB_DISP_MONO 32
|
|
#define FB_DISP_RGB 64
|
|
#define FB_DISP_MULTI 128
|
|
#define FB_DISP_UNKNOWN 256
|
|
|
|
#define FB_SIGNAL_NONE 0
|
|
#define FB_SIGNAL_BLANK_BLANK 1
|
|
#define FB_SIGNAL_SEPARATE 2
|
|
#define FB_SIGNAL_COMPOSITE 4
|
|
#define FB_SIGNAL_SYNC_ON_GREEN 8
|
|
#define FB_SIGNAL_SERRATION_ON 16
|
|
|
|
#define FB_MISC_PRIM_COLOR 1
|
|
#define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */
|
|
struct fb_chroma {
|
|
__u32 redx; /* in fraction of 1024 */
|
|
__u32 greenx;
|
|
__u32 bluex;
|
|
__u32 whitex;
|
|
__u32 redy;
|
|
__u32 greeny;
|
|
__u32 bluey;
|
|
__u32 whitey;
|
|
};
|
|
|
|
struct fb_monspecs {
|
|
struct fb_chroma chroma;
|
|
struct fb_videomode *modedb; /* mode database */
|
|
__u8 manufacturer[4]; /* Manufacturer */
|
|
__u8 monitor[14]; /* Monitor String */
|
|
__u8 serial_no[14]; /* Serial Number */
|
|
__u8 ascii[14]; /* ? */
|
|
__u32 modedb_len; /* mode database length */
|
|
__u32 model; /* Monitor Model */
|
|
__u32 serial; /* Serial Number - Integer */
|
|
__u32 year; /* Year manufactured */
|
|
__u32 week; /* Week Manufactured */
|
|
__u32 hfmin; /* hfreq lower limit (Hz) */
|
|
__u32 hfmax; /* hfreq upper limit (Hz) */
|
|
__u32 dclkmin; /* pixelclock lower limit (Hz) */
|
|
__u32 dclkmax; /* pixelclock upper limit (Hz) */
|
|
__u16 input; /* display type - see FB_DISP_* */
|
|
__u16 dpms; /* DPMS support - see FB_DPMS_ */
|
|
__u16 signal; /* Signal Type - see FB_SIGNAL_* */
|
|
__u16 vfmin; /* vfreq lower limit (Hz) */
|
|
__u16 vfmax; /* vfreq upper limit (Hz) */
|
|
__u16 gamma; /* Gamma - in fractions of 100 */
|
|
__u16 gtf : 1; /* supports GTF */
|
|
__u16 misc; /* Misc flags - see FB_MISC_* */
|
|
__u8 version; /* EDID version... */
|
|
__u8 revision; /* ...and revision */
|
|
__u8 max_x; /* Maximum horizontal size (cm) */
|
|
__u8 max_y; /* Maximum vertical size (cm) */
|
|
};
|
|
|
|
struct fb_cmap_user {
|
|
__u32 start; /* First entry */
|
|
__u32 len; /* Number of entries */
|
|
__u16 __user *red; /* Red values */
|
|
__u16 __user *green;
|
|
__u16 __user *blue;
|
|
__u16 __user *transp; /* transparency, can be NULL */
|
|
};
|
|
|
|
struct fb_image_user {
|
|
__u32 dx; /* Where to place image */
|
|
__u32 dy;
|
|
__u32 width; /* Size of image */
|
|
__u32 height;
|
|
__u32 fg_color; /* Only used when a mono bitmap */
|
|
__u32 bg_color;
|
|
__u8 depth; /* Depth of the image */
|
|
const char __user *data; /* Pointer to image data */
|
|
struct fb_cmap_user cmap; /* color map info */
|
|
};
|
|
|
|
struct fb_cursor_user {
|
|
__u16 set; /* what to set */
|
|
__u16 enable; /* cursor on/off */
|
|
__u16 rop; /* bitop operation */
|
|
const char __user *mask; /* cursor mask bits */
|
|
struct fbcurpos hot; /* cursor hot spot */
|
|
struct fb_image_user image; /* Cursor image */
|
|
};
|
|
|
|
/*
|
|
* Register/unregister for framebuffer events
|
|
*/
|
|
|
|
/* The resolution of the passed in fb_info about to change */
|
|
#define FB_EVENT_MODE_CHANGE 0x01
|
|
/* The display on this fb_info is beeing suspended, no access to the
|
|
* framebuffer is allowed any more after that call returns
|
|
*/
|
|
#define FB_EVENT_SUSPEND 0x02
|
|
/* The display on this fb_info was resumed, you can restore the display
|
|
* if you own it
|
|
*/
|
|
#define FB_EVENT_RESUME 0x03
|
|
/* An entry from the modelist was removed */
|
|
#define FB_EVENT_MODE_DELETE 0x04
|
|
/* A driver registered itself */
|
|
#define FB_EVENT_FB_REGISTERED 0x05
|
|
/* A driver unregistered itself */
|
|
#define FB_EVENT_FB_UNREGISTERED 0x06
|
|
/* CONSOLE-SPECIFIC: get console to framebuffer mapping */
|
|
#define FB_EVENT_GET_CONSOLE_MAP 0x07
|
|
/* CONSOLE-SPECIFIC: set console to framebuffer mapping */
|
|
#define FB_EVENT_SET_CONSOLE_MAP 0x08
|
|
/* A hardware display blank change occurred */
|
|
#define FB_EVENT_BLANK 0x09
|
|
/* Private modelist is to be replaced */
|
|
#define FB_EVENT_NEW_MODELIST 0x0A
|
|
/* The resolution of the passed in fb_info about to change and
|
|
all vc's should be changed */
|
|
#define FB_EVENT_MODE_CHANGE_ALL 0x0B
|
|
/* A software display blank change occurred */
|
|
#define FB_EVENT_CONBLANK 0x0C
|
|
/* Get drawing requirements */
|
|
#define FB_EVENT_GET_REQ 0x0D
|
|
/* Unbind from the console if possible */
|
|
#define FB_EVENT_FB_UNBIND 0x0E
|
|
/* CONSOLE-SPECIFIC: remap all consoles to new fb - for vga switcheroo */
|
|
#define FB_EVENT_REMAP_ALL_CONSOLE 0x0F
|
|
|
|
struct fb_event {
|
|
struct fb_info *info;
|
|
void *data;
|
|
};
|
|
|
|
struct fb_blit_caps {
|
|
u32 x;
|
|
u32 y;
|
|
u32 len;
|
|
u32 flags;
|
|
};
|
|
|
|
extern int fb_register_client(struct notifier_block *nb);
|
|
extern int fb_unregister_client(struct notifier_block *nb);
|
|
extern int fb_notifier_call_chain(unsigned long val, void *v);
|
|
/*
|
|
* Pixmap structure definition
|
|
*
|
|
* The purpose of this structure is to translate data
|
|
* from the hardware independent format of fbdev to what
|
|
* format the hardware needs.
|
|
*/
|
|
|
|
#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */
|
|
#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */
|
|
#define FB_PIXMAP_IO 4 /* memory is iomapped */
|
|
#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */
|
|
|
|
struct fb_pixmap {
|
|
u8 *addr; /* pointer to memory */
|
|
u32 size; /* size of buffer in bytes */
|
|
u32 offset; /* current offset to buffer */
|
|
u32 buf_align; /* byte alignment of each bitmap */
|
|
u32 scan_align; /* alignment per scanline */
|
|
u32 access_align; /* alignment per read/write (bits) */
|
|
u32 flags; /* see FB_PIXMAP_* */
|
|
u32 blit_x; /* supported bit block dimensions (1-32)*/
|
|
u32 blit_y; /* Format: blit_x = 1 << (width - 1) */
|
|
/* blit_y = 1 << (height - 1) */
|
|
/* if 0, will be set to 0xffffffff (all)*/
|
|
/* access methods */
|
|
void (*writeio)(struct fb_info *info, void __iomem *dst, void *src, unsigned int size);
|
|
void (*readio) (struct fb_info *info, void *dst, void __iomem *src, unsigned int size);
|
|
};
|
|
|
|
#ifdef CONFIG_FB_DEFERRED_IO
|
|
struct fb_deferred_io {
|
|
/* delay between mkwrite and deferred handler */
|
|
unsigned long delay;
|
|
struct mutex lock; /* mutex that protects the page list */
|
|
struct list_head pagelist; /* list of touched pages */
|
|
/* callback */
|
|
void (*deferred_io)(struct fb_info *info, struct list_head *pagelist);
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* Frame buffer operations
|
|
*
|
|
* LOCKING NOTE: those functions must _ALL_ be called with the console
|
|
* semaphore held, this is the only suitable locking mechanism we have
|
|
* in 2.6. Some may be called at interrupt time at this point though.
|
|
*
|
|
* The exception to this is the debug related hooks. Putting the fb
|
|
* into a debug state (e.g. flipping to the kernel console) and restoring
|
|
* it must be done in a lock-free manner, so low level drivers should
|
|
* keep track of the initial console (if applicable) and may need to
|
|
* perform direct, unlocked hardware writes in these hooks.
|
|
*/
|
|
|
|
struct fb_ops {
|
|
/* open/release and usage marking */
|
|
struct module *owner;
|
|
int (*fb_open)(struct fb_info *info, int user);
|
|
int (*fb_release)(struct fb_info *info, int user);
|
|
|
|
/* For framebuffers with strange non linear layouts or that do not
|
|
* work with normal memory mapped access
|
|
*/
|
|
ssize_t (*fb_read)(struct fb_info *info, char __user *buf,
|
|
size_t count, loff_t *ppos);
|
|
ssize_t (*fb_write)(struct fb_info *info, const char __user *buf,
|
|
size_t count, loff_t *ppos);
|
|
|
|
/* checks var and eventually tweaks it to something supported,
|
|
* DO NOT MODIFY PAR */
|
|
int (*fb_check_var)(struct fb_var_screeninfo *var, struct fb_info *info);
|
|
|
|
/* set the video mode according to info->var */
|
|
int (*fb_set_par)(struct fb_info *info);
|
|
|
|
/* set color register */
|
|
int (*fb_setcolreg)(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp, struct fb_info *info);
|
|
|
|
/* set color registers in batch */
|
|
int (*fb_setcmap)(struct fb_cmap *cmap, struct fb_info *info);
|
|
|
|
/* blank display */
|
|
int (*fb_blank)(int blank, struct fb_info *info);
|
|
|
|
/* pan display */
|
|
int (*fb_pan_display)(struct fb_var_screeninfo *var, struct fb_info *info);
|
|
|
|
/* Draws a rectangle */
|
|
void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
|
|
/* Copy data from area to another */
|
|
void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
|
|
/* Draws a image to the display */
|
|
void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
|
|
|
|
/* Draws cursor */
|
|
int (*fb_cursor) (struct fb_info *info, struct fb_cursor *cursor);
|
|
|
|
/* Rotates the display */
|
|
void (*fb_rotate)(struct fb_info *info, int angle);
|
|
|
|
/* wait for blit idle, optional */
|
|
int (*fb_sync)(struct fb_info *info);
|
|
|
|
/* perform fb specific ioctl (optional) */
|
|
int (*fb_ioctl)(struct fb_info *info, unsigned int cmd,
|
|
unsigned long arg);
|
|
|
|
/* Handle 32bit compat ioctl (optional) */
|
|
int (*fb_compat_ioctl)(struct fb_info *info, unsigned cmd,
|
|
unsigned long arg);
|
|
|
|
/* perform fb specific mmap */
|
|
int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
|
|
|
|
/* get capability given var */
|
|
void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
|
|
struct fb_var_screeninfo *var);
|
|
|
|
/* teardown any resources to do with this framebuffer */
|
|
void (*fb_destroy)(struct fb_info *info);
|
|
|
|
/* called at KDB enter and leave time to prepare the console */
|
|
int (*fb_debug_enter)(struct fb_info *info);
|
|
int (*fb_debug_leave)(struct fb_info *info);
|
|
};
|
|
|
|
#ifdef CONFIG_FB_TILEBLITTING
|
|
#define FB_TILE_CURSOR_NONE 0
|
|
#define FB_TILE_CURSOR_UNDERLINE 1
|
|
#define FB_TILE_CURSOR_LOWER_THIRD 2
|
|
#define FB_TILE_CURSOR_LOWER_HALF 3
|
|
#define FB_TILE_CURSOR_TWO_THIRDS 4
|
|
#define FB_TILE_CURSOR_BLOCK 5
|
|
|
|
struct fb_tilemap {
|
|
__u32 width; /* width of each tile in pixels */
|
|
__u32 height; /* height of each tile in scanlines */
|
|
__u32 depth; /* color depth of each tile */
|
|
__u32 length; /* number of tiles in the map */
|
|
const __u8 *data; /* actual tile map: a bitmap array, packed
|
|
to the nearest byte */
|
|
};
|
|
|
|
struct fb_tilerect {
|
|
__u32 sx; /* origin in the x-axis */
|
|
__u32 sy; /* origin in the y-axis */
|
|
__u32 width; /* number of tiles in the x-axis */
|
|
__u32 height; /* number of tiles in the y-axis */
|
|
__u32 index; /* what tile to use: index to tile map */
|
|
__u32 fg; /* foreground color */
|
|
__u32 bg; /* background color */
|
|
__u32 rop; /* raster operation */
|
|
};
|
|
|
|
struct fb_tilearea {
|
|
__u32 sx; /* source origin in the x-axis */
|
|
__u32 sy; /* source origin in the y-axis */
|
|
__u32 dx; /* destination origin in the x-axis */
|
|
__u32 dy; /* destination origin in the y-axis */
|
|
__u32 width; /* number of tiles in the x-axis */
|
|
__u32 height; /* number of tiles in the y-axis */
|
|
};
|
|
|
|
struct fb_tileblit {
|
|
__u32 sx; /* origin in the x-axis */
|
|
__u32 sy; /* origin in the y-axis */
|
|
__u32 width; /* number of tiles in the x-axis */
|
|
__u32 height; /* number of tiles in the y-axis */
|
|
__u32 fg; /* foreground color */
|
|
__u32 bg; /* background color */
|
|
__u32 length; /* number of tiles to draw */
|
|
__u32 *indices; /* array of indices to tile map */
|
|
};
|
|
|
|
struct fb_tilecursor {
|
|
__u32 sx; /* cursor position in the x-axis */
|
|
__u32 sy; /* cursor position in the y-axis */
|
|
__u32 mode; /* 0 = erase, 1 = draw */
|
|
__u32 shape; /* see FB_TILE_CURSOR_* */
|
|
__u32 fg; /* foreground color */
|
|
__u32 bg; /* background color */
|
|
};
|
|
|
|
struct fb_tile_ops {
|
|
/* set tile characteristics */
|
|
void (*fb_settile)(struct fb_info *info, struct fb_tilemap *map);
|
|
|
|
/* all dimensions from hereon are in terms of tiles */
|
|
|
|
/* move a rectangular region of tiles from one area to another*/
|
|
void (*fb_tilecopy)(struct fb_info *info, struct fb_tilearea *area);
|
|
/* fill a rectangular region with a tile */
|
|
void (*fb_tilefill)(struct fb_info *info, struct fb_tilerect *rect);
|
|
/* copy an array of tiles */
|
|
void (*fb_tileblit)(struct fb_info *info, struct fb_tileblit *blit);
|
|
/* cursor */
|
|
void (*fb_tilecursor)(struct fb_info *info,
|
|
struct fb_tilecursor *cursor);
|
|
/* get maximum length of the tile map */
|
|
int (*fb_get_tilemax)(struct fb_info *info);
|
|
};
|
|
#endif /* CONFIG_FB_TILEBLITTING */
|
|
|
|
/* FBINFO_* = fb_info.flags bit flags */
|
|
#define FBINFO_MODULE 0x0001 /* Low-level driver is a module */
|
|
#define FBINFO_HWACCEL_DISABLED 0x0002
|
|
/* When FBINFO_HWACCEL_DISABLED is set:
|
|
* Hardware acceleration is turned off. Software implementations
|
|
* of required functions (copyarea(), fillrect(), and imageblit())
|
|
* takes over; acceleration engine should be in a quiescent state */
|
|
|
|
/* hints */
|
|
#define FBINFO_VIRTFB 0x0004 /* FB is System RAM, not device. */
|
|
#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */
|
|
#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */
|
|
|
|
/* hardware supported ops */
|
|
/* semantics: when a bit is set, it indicates that the operation is
|
|
* accelerated by hardware.
|
|
* required functions will still work even if the bit is not set.
|
|
* optional functions may not even exist if the flag bit is not set.
|
|
*/
|
|
#define FBINFO_HWACCEL_NONE 0x0000
|
|
#define FBINFO_HWACCEL_COPYAREA 0x0100 /* required */
|
|
#define FBINFO_HWACCEL_FILLRECT 0x0200 /* required */
|
|
#define FBINFO_HWACCEL_IMAGEBLIT 0x0400 /* required */
|
|
#define FBINFO_HWACCEL_ROTATE 0x0800 /* optional */
|
|
#define FBINFO_HWACCEL_XPAN 0x1000 /* optional */
|
|
#define FBINFO_HWACCEL_YPAN 0x2000 /* optional */
|
|
#define FBINFO_HWACCEL_YWRAP 0x4000 /* optional */
|
|
|
|
#define FBINFO_MISC_USEREVENT 0x10000 /* event request
|
|
from userspace */
|
|
#define FBINFO_MISC_TILEBLITTING 0x20000 /* use tile blitting */
|
|
|
|
/* A driver may set this flag to indicate that it does want a set_par to be
|
|
* called every time when fbcon_switch is executed. The advantage is that with
|
|
* this flag set you can really be sure that set_par is always called before
|
|
* any of the functions dependent on the correct hardware state or altering
|
|
* that state, even if you are using some broken X releases. The disadvantage
|
|
* is that it introduces unwanted delays to every console switch if set_par
|
|
* is slow. It is a good idea to try this flag in the drivers initialization
|
|
* code whenever there is a bug report related to switching between X and the
|
|
* framebuffer console.
|
|
*/
|
|
#define FBINFO_MISC_ALWAYS_SETPAR 0x40000
|
|
|
|
/* where the fb is a firmware driver, and can be replaced with a proper one */
|
|
#define FBINFO_MISC_FIRMWARE 0x80000
|
|
/*
|
|
* Host and GPU endianness differ.
|
|
*/
|
|
#define FBINFO_FOREIGN_ENDIAN 0x100000
|
|
/*
|
|
* Big endian math. This is the same flags as above, but with different
|
|
* meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag
|
|
* and host endianness. Drivers should not use this flag.
|
|
*/
|
|
#define FBINFO_BE_MATH 0x100000
|
|
|
|
/* report to the VT layer that this fb driver can accept forced console
|
|
output like oopses */
|
|
#define FBINFO_CAN_FORCE_OUTPUT 0x200000
|
|
|
|
struct fb_info {
|
|
atomic_t count;
|
|
int node;
|
|
int flags;
|
|
struct mutex lock; /* Lock for open/release/ioctl funcs */
|
|
struct mutex mm_lock; /* Lock for fb_mmap and smem_* fields */
|
|
struct fb_var_screeninfo var; /* Current var */
|
|
struct fb_fix_screeninfo fix; /* Current fix */
|
|
struct fb_monspecs monspecs; /* Current Monitor specs */
|
|
struct work_struct queue; /* Framebuffer event queue */
|
|
struct fb_pixmap pixmap; /* Image hardware mapper */
|
|
struct fb_pixmap sprite; /* Cursor hardware mapper */
|
|
struct fb_cmap cmap; /* Current cmap */
|
|
struct list_head modelist; /* mode list */
|
|
struct fb_videomode *mode; /* current mode */
|
|
|
|
#ifdef CONFIG_FB_BACKLIGHT
|
|
/* assigned backlight device */
|
|
/* set before framebuffer registration,
|
|
remove after unregister */
|
|
struct backlight_device *bl_dev;
|
|
|
|
/* Backlight level curve */
|
|
struct mutex bl_curve_mutex;
|
|
u8 bl_curve[FB_BACKLIGHT_LEVELS];
|
|
#endif
|
|
#ifdef CONFIG_FB_DEFERRED_IO
|
|
struct delayed_work deferred_work;
|
|
struct fb_deferred_io *fbdefio;
|
|
#endif
|
|
|
|
struct fb_ops *fbops;
|
|
struct device *device; /* This is the parent */
|
|
struct device *dev; /* This is this fb device */
|
|
int class_flag; /* private sysfs flags */
|
|
#ifdef CONFIG_FB_TILEBLITTING
|
|
struct fb_tile_ops *tileops; /* Tile Blitting */
|
|
#endif
|
|
char __iomem *screen_base; /* Virtual address */
|
|
unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */
|
|
void *pseudo_palette; /* Fake palette of 16 colors */
|
|
#define FBINFO_STATE_RUNNING 0
|
|
#define FBINFO_STATE_SUSPENDED 1
|
|
u32 state; /* Hardware state i.e suspend */
|
|
void *fbcon_par; /* fbcon use-only private area */
|
|
/* From here on everything is device dependent */
|
|
void *par;
|
|
/* we need the PCI or similar aperture base/size not
|
|
smem_start/size as smem_start may just be an object
|
|
allocated inside the aperture so may not actually overlap */
|
|
struct apertures_struct {
|
|
unsigned int count;
|
|
struct aperture {
|
|
resource_size_t base;
|
|
resource_size_t size;
|
|
} ranges[0];
|
|
} *apertures;
|
|
};
|
|
|
|
static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
|
|
struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
|
|
+ max_num * sizeof(struct aperture), GFP_KERNEL);
|
|
if (!a)
|
|
return NULL;
|
|
a->count = max_num;
|
|
return a;
|
|
}
|
|
|
|
#ifdef MODULE
|
|
#define FBINFO_DEFAULT FBINFO_MODULE
|
|
#else
|
|
#define FBINFO_DEFAULT 0
|
|
#endif
|
|
|
|
// This will go away
|
|
#define FBINFO_FLAG_MODULE FBINFO_MODULE
|
|
#define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT
|
|
|
|
/* This will go away
|
|
* fbset currently hacks in FB_ACCELF_TEXT into var.accel_flags
|
|
* when it wants to turn the acceleration engine on. This is
|
|
* really a separate operation, and should be modified via sysfs.
|
|
* But for now, we leave it broken with the following define
|
|
*/
|
|
#define STUPID_ACCELF_TEXT_SHIT
|
|
|
|
// This will go away
|
|
#if defined(__sparc__)
|
|
|
|
/* We map all of our framebuffers such that big-endian accesses
|
|
* are what we want, so the following is sufficient.
|
|
*/
|
|
|
|
// This will go away
|
|
#define fb_readb sbus_readb
|
|
#define fb_readw sbus_readw
|
|
#define fb_readl sbus_readl
|
|
#define fb_readq sbus_readq
|
|
#define fb_writeb sbus_writeb
|
|
#define fb_writew sbus_writew
|
|
#define fb_writel sbus_writel
|
|
#define fb_writeq sbus_writeq
|
|
#define fb_memset sbus_memset_io
|
|
#define fb_memcpy_fromfb sbus_memcpy_fromio
|
|
#define fb_memcpy_tofb sbus_memcpy_toio
|
|
|
|
#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
|
|
|
|
#define fb_readb __raw_readb
|
|
#define fb_readw __raw_readw
|
|
#define fb_readl __raw_readl
|
|
#define fb_readq __raw_readq
|
|
#define fb_writeb __raw_writeb
|
|
#define fb_writew __raw_writew
|
|
#define fb_writel __raw_writel
|
|
#define fb_writeq __raw_writeq
|
|
#define fb_memset memset_io
|
|
#define fb_memcpy_fromfb memcpy_fromio
|
|
#define fb_memcpy_tofb memcpy_toio
|
|
|
|
#else
|
|
|
|
#define fb_readb(addr) (*(volatile u8 *) (addr))
|
|
#define fb_readw(addr) (*(volatile u16 *) (addr))
|
|
#define fb_readl(addr) (*(volatile u32 *) (addr))
|
|
#define fb_readq(addr) (*(volatile u64 *) (addr))
|
|
#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
|
|
#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
|
|
#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
|
|
#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
|
|
#define fb_memset memset
|
|
#define fb_memcpy_fromfb memcpy
|
|
#define fb_memcpy_tofb memcpy
|
|
|
|
#endif
|
|
|
|
#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0)
|
|
#define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \
|
|
(val) << (bits))
|
|
#define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \
|
|
(val) >> (bits))
|
|
|
|
/*
|
|
* `Generic' versions of the frame buffer device operations
|
|
*/
|
|
|
|
extern int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var);
|
|
extern int fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var);
|
|
extern int fb_blank(struct fb_info *info, int blank);
|
|
extern void cfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
|
|
extern void cfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
|
|
extern void cfb_imageblit(struct fb_info *info, const struct fb_image *image);
|
|
/*
|
|
* Drawing operations where framebuffer is in system RAM
|
|
*/
|
|
extern void sys_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
|
|
extern void sys_copyarea(struct fb_info *info, const struct fb_copyarea *area);
|
|
extern void sys_imageblit(struct fb_info *info, const struct fb_image *image);
|
|
extern ssize_t fb_sys_read(struct fb_info *info, char __user *buf,
|
|
size_t count, loff_t *ppos);
|
|
extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
|
|
size_t count, loff_t *ppos);
|
|
|
|
/* drivers/video/fbmem.c */
|
|
extern int register_framebuffer(struct fb_info *fb_info);
|
|
extern int unregister_framebuffer(struct fb_info *fb_info);
|
|
extern void remove_conflicting_framebuffers(struct apertures_struct *a,
|
|
const char *name, bool primary);
|
|
extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
|
|
extern int fb_show_logo(struct fb_info *fb_info, int rotate);
|
|
extern char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size);
|
|
extern void fb_pad_unaligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 idx,
|
|
u32 height, u32 shift_high, u32 shift_low, u32 mod);
|
|
extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height);
|
|
extern void fb_set_suspend(struct fb_info *info, int state);
|
|
extern int fb_get_color_depth(struct fb_var_screeninfo *var,
|
|
struct fb_fix_screeninfo *fix);
|
|
extern int fb_get_options(char *name, char **option);
|
|
extern int fb_new_modelist(struct fb_info *info);
|
|
|
|
extern struct fb_info *registered_fb[FB_MAX];
|
|
extern int num_registered_fb;
|
|
extern struct class *fb_class;
|
|
|
|
extern int lock_fb_info(struct fb_info *info);
|
|
|
|
static inline void unlock_fb_info(struct fb_info *info)
|
|
{
|
|
mutex_unlock(&info->lock);
|
|
}
|
|
|
|
static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
|
|
u8 *src, u32 s_pitch, u32 height)
|
|
{
|
|
int i, j;
|
|
|
|
d_pitch -= s_pitch;
|
|
|
|
for (i = height; i--; ) {
|
|
/* s_pitch is a few bytes at the most, memcpy is suboptimal */
|
|
for (j = 0; j < s_pitch; j++)
|
|
*dst++ = *src++;
|
|
dst += d_pitch;
|
|
}
|
|
}
|
|
|
|
/* drivers/video/fb_defio.c */
|
|
extern void fb_deferred_io_init(struct fb_info *info);
|
|
extern void fb_deferred_io_open(struct fb_info *info,
|
|
struct inode *inode,
|
|
struct file *file);
|
|
extern void fb_deferred_io_cleanup(struct fb_info *info);
|
|
extern int fb_deferred_io_fsync(struct file *file, int datasync);
|
|
|
|
static inline bool fb_be_math(struct fb_info *info)
|
|
{
|
|
#ifdef CONFIG_FB_FOREIGN_ENDIAN
|
|
#if defined(CONFIG_FB_BOTH_ENDIAN)
|
|
return info->flags & FBINFO_BE_MATH;
|
|
#elif defined(CONFIG_FB_BIG_ENDIAN)
|
|
return true;
|
|
#elif defined(CONFIG_FB_LITTLE_ENDIAN)
|
|
return false;
|
|
#endif /* CONFIG_FB_BOTH_ENDIAN */
|
|
#else
|
|
#ifdef __BIG_ENDIAN
|
|
return true;
|
|
#else
|
|
return false;
|
|
#endif /* __BIG_ENDIAN */
|
|
#endif /* CONFIG_FB_FOREIGN_ENDIAN */
|
|
}
|
|
|
|
/* drivers/video/fbsysfs.c */
|
|
extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
|
|
extern void framebuffer_release(struct fb_info *info);
|
|
extern int fb_init_device(struct fb_info *fb_info);
|
|
extern void fb_cleanup_device(struct fb_info *head);
|
|
extern void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max);
|
|
|
|
/* drivers/video/fbmon.c */
|
|
#define FB_MAXTIMINGS 0
|
|
#define FB_VSYNCTIMINGS 1
|
|
#define FB_HSYNCTIMINGS 2
|
|
#define FB_DCLKTIMINGS 3
|
|
#define FB_IGNOREMON 0x100
|
|
|
|
#define FB_MODE_IS_UNKNOWN 0
|
|
#define FB_MODE_IS_DETAILED 1
|
|
#define FB_MODE_IS_STANDARD 2
|
|
#define FB_MODE_IS_VESA 4
|
|
#define FB_MODE_IS_CALCULATED 8
|
|
#define FB_MODE_IS_FIRST 16
|
|
#define FB_MODE_IS_FROM_VAR 32
|
|
|
|
extern int fbmon_dpms(const struct fb_info *fb_info);
|
|
extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
extern int fb_validate_mode(const struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
|
|
extern const unsigned char *fb_firmware_edid(struct device *device);
|
|
extern void fb_edid_to_monspecs(unsigned char *edid,
|
|
struct fb_monspecs *specs);
|
|
extern void fb_edid_add_monspecs(unsigned char *edid,
|
|
struct fb_monspecs *specs);
|
|
extern void fb_destroy_modedb(struct fb_videomode *modedb);
|
|
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
|
|
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
|
|
|
|
/* drivers/video/modedb.c */
|
|
#define VESA_MODEDB_SIZE 34
|
|
extern void fb_var_to_videomode(struct fb_videomode *mode,
|
|
const struct fb_var_screeninfo *var);
|
|
extern void fb_videomode_to_var(struct fb_var_screeninfo *var,
|
|
const struct fb_videomode *mode);
|
|
extern int fb_mode_is_equal(const struct fb_videomode *mode1,
|
|
const struct fb_videomode *mode2);
|
|
extern int fb_add_videomode(const struct fb_videomode *mode,
|
|
struct list_head *head);
|
|
extern void fb_delete_videomode(const struct fb_videomode *mode,
|
|
struct list_head *head);
|
|
extern const struct fb_videomode *fb_match_mode(const struct fb_var_screeninfo *var,
|
|
struct list_head *head);
|
|
extern const struct fb_videomode *fb_find_best_mode(const struct fb_var_screeninfo *var,
|
|
struct list_head *head);
|
|
extern const struct fb_videomode *fb_find_nearest_mode(const struct fb_videomode *mode,
|
|
struct list_head *head);
|
|
extern void fb_destroy_modelist(struct list_head *head);
|
|
extern void fb_videomode_to_modelist(const struct fb_videomode *modedb, int num,
|
|
struct list_head *head);
|
|
extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs *specs,
|
|
struct list_head *head);
|
|
|
|
/* drivers/video/fbcmap.c */
|
|
extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
|
|
extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
|
|
extern void fb_dealloc_cmap(struct fb_cmap *cmap);
|
|
extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
|
|
extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
|
|
extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
|
|
extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
|
|
extern const struct fb_cmap *fb_default_cmap(int len);
|
|
extern void fb_invert_cmaps(void);
|
|
|
|
struct fb_videomode {
|
|
const char *name; /* optional */
|
|
u32 refresh; /* optional */
|
|
u32 xres;
|
|
u32 yres;
|
|
u32 pixclock;
|
|
u32 left_margin;
|
|
u32 right_margin;
|
|
u32 upper_margin;
|
|
u32 lower_margin;
|
|
u32 hsync_len;
|
|
u32 vsync_len;
|
|
u32 sync;
|
|
u32 vmode;
|
|
u32 flag;
|
|
};
|
|
|
|
extern const char *fb_mode_option;
|
|
extern const struct fb_videomode vesa_modes[];
|
|
extern const struct fb_videomode cea_modes[64];
|
|
|
|
struct fb_modelist {
|
|
struct list_head list;
|
|
struct fb_videomode mode;
|
|
};
|
|
|
|
extern int fb_find_mode(struct fb_var_screeninfo *var,
|
|
struct fb_info *info, const char *mode_option,
|
|
const struct fb_videomode *db,
|
|
unsigned int dbsize,
|
|
const struct fb_videomode *default_mode,
|
|
unsigned int default_bpp);
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* _LINUX_FB_H */
|