fa1b2ca4fa
There's no point in giving the I2C bus of Voodoo3 adapters a class value, there's no video chip driver checking for it anymore. If support is ever needed, the video device should be instantiated explicitly rather than probed. To the best of my knowledge the only video chip that can be found on these boards is a BT869 video encoder, for which no support exists currently. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
248 lines
6.1 KiB
C
248 lines
6.1 KiB
C
/*
|
|
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>,
|
|
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
Simon Vogl
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
|
the BT869 and possibly other I2C devices. */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <asm/io.h>
|
|
|
|
/* the only registers we use */
|
|
#define REG 0x78
|
|
#define REG2 0x70
|
|
|
|
/* bit locations in the register */
|
|
#define DDC_ENAB 0x00040000
|
|
#define DDC_SCL_OUT 0x00080000
|
|
#define DDC_SDA_OUT 0x00100000
|
|
#define DDC_SCL_IN 0x00200000
|
|
#define DDC_SDA_IN 0x00400000
|
|
#define I2C_ENAB 0x00800000
|
|
#define I2C_SCL_OUT 0x01000000
|
|
#define I2C_SDA_OUT 0x02000000
|
|
#define I2C_SCL_IN 0x04000000
|
|
#define I2C_SDA_IN 0x08000000
|
|
|
|
/* initialization states */
|
|
#define INIT2 0x2
|
|
#define INIT3 0x4
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
|
|
static void __iomem *ioaddr;
|
|
|
|
/* The voo GPIO registers don't have individual masks for each bit
|
|
so we always have to read before writing. */
|
|
|
|
static void bit_vooi2c_setscl(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if (val)
|
|
r |= I2C_SCL_OUT;
|
|
else
|
|
r &= ~I2C_SCL_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
static void bit_vooi2c_setsda(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if (val)
|
|
r |= I2C_SDA_OUT;
|
|
else
|
|
r &= ~I2C_SDA_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
/* The GPIO pins are open drain, so the pins always remain outputs.
|
|
We rely on the i2c-algo-bit routines to set the pins high before
|
|
reading the input from other chips. */
|
|
|
|
static int bit_vooi2c_getscl(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
|
}
|
|
|
|
static int bit_vooi2c_getsda(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
|
}
|
|
|
|
static void bit_vooddc_setscl(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if (val)
|
|
r |= DDC_SCL_OUT;
|
|
else
|
|
r &= ~DDC_SCL_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
static void bit_vooddc_setsda(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if (val)
|
|
r |= DDC_SDA_OUT;
|
|
else
|
|
r &= ~DDC_SDA_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
static int bit_vooddc_getscl(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
|
|
}
|
|
|
|
static int bit_vooddc_getsda(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
|
|
}
|
|
|
|
static int config_v3(struct pci_dev *dev)
|
|
{
|
|
unsigned long cadr;
|
|
|
|
/* map Voodoo3 memory */
|
|
cadr = dev->resource[0].start;
|
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
ioaddr = ioremap_nocache(cadr, 0x1000);
|
|
if (ioaddr) {
|
|
writel(0x8160, ioaddr + REG2);
|
|
writel(0xcffc0020, ioaddr + REG);
|
|
dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
|
.setsda = bit_vooi2c_setsda,
|
|
.setscl = bit_vooi2c_setscl,
|
|
.getsda = bit_vooi2c_getsda,
|
|
.getscl = bit_vooi2c_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter voodoo3_i2c_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "I2C Voodoo3/Banshee adapter",
|
|
.algo_data = &voo_i2c_bit_data,
|
|
};
|
|
|
|
static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
|
.setsda = bit_vooddc_setsda,
|
|
.setscl = bit_vooddc_setscl,
|
|
.getsda = bit_vooddc_getsda,
|
|
.getscl = bit_vooddc_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter voodoo3_ddc_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.class = I2C_CLASS_DDC,
|
|
.name = "DDC Voodoo3/Banshee adapter",
|
|
.algo_data = &voo_ddc_bit_data,
|
|
};
|
|
|
|
static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, voodoo3_ids);
|
|
|
|
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int retval;
|
|
|
|
retval = config_v3(dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* set up the sysfs linkage to our parent device */
|
|
voodoo3_i2c_adapter.dev.parent = &dev->dev;
|
|
voodoo3_ddc_adapter.dev.parent = &dev->dev;
|
|
|
|
retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
|
if (retval)
|
|
return retval;
|
|
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
|
if (retval)
|
|
i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
return retval;
|
|
}
|
|
|
|
static void __devexit voodoo3_remove(struct pci_dev *dev)
|
|
{
|
|
i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
i2c_del_adapter(&voodoo3_ddc_adapter);
|
|
iounmap(ioaddr);
|
|
}
|
|
|
|
static struct pci_driver voodoo3_driver = {
|
|
.name = "voodoo3_smbus",
|
|
.id_table = voodoo3_ids,
|
|
.probe = voodoo3_probe,
|
|
.remove = __devexit_p(voodoo3_remove),
|
|
};
|
|
|
|
static int __init i2c_voodoo3_init(void)
|
|
{
|
|
return pci_register_driver(&voodoo3_driver);
|
|
}
|
|
|
|
static void __exit i2c_voodoo3_exit(void)
|
|
{
|
|
pci_unregister_driver(&voodoo3_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
"Philip Edelbrock <phil@netroedge.com>, "
|
|
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
|
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_voodoo3_init);
|
|
module_exit(i2c_voodoo3_exit);
|