f5db4af466
This patch contains a device-mapper mirror log module that forwards requests to userspace for processing. The structures used for communication between kernel and userspace are located in include/linux/dm-log-userspace.h. Due to the frequency, diversity, and 2-way communication nature of the exchanges between kernel and userspace, 'connector' was chosen as the interface for communication. The first log implementations written in userspace - "clustered-disk" and "clustered-core" - support clustered shared storage. A userspace daemon (in the LVM2 source code repository) uses openAIS/corosync to process requests in an ordered fashion with the rest of the nodes in the cluster so as to prevent log state corruption. Other implementations with no association to LVM or openAIS/corosync, are certainly possible. (Imagine if two machines are writing to the same region of a mirror. They would both mark the region dirty, but you need a cluster-aware entity that can handle properly marking the region clean when they are done. Otherwise, you might clear the region when the first machine is done, not the second.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
119 lines
3.9 KiB
Makefile
119 lines
3.9 KiB
Makefile
#
|
|
# Makefile for the kernel software RAID and LVM drivers.
|
|
#
|
|
|
|
dm-mod-y += dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \
|
|
dm-ioctl.o dm-io.o dm-kcopyd.o dm-sysfs.o
|
|
dm-multipath-y += dm-path-selector.o dm-mpath.o
|
|
dm-snapshot-y += dm-snap.o dm-exception-store.o dm-snap-transient.o \
|
|
dm-snap-persistent.o
|
|
dm-mirror-y += dm-raid1.o
|
|
dm-log-userspace-y \
|
|
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
|
|
md-mod-y += md.o bitmap.o
|
|
raid456-y += raid5.o
|
|
raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
|
|
raid6int1.o raid6int2.o raid6int4.o \
|
|
raid6int8.o raid6int16.o raid6int32.o \
|
|
raid6altivec1.o raid6altivec2.o raid6altivec4.o \
|
|
raid6altivec8.o \
|
|
raid6mmx.o raid6sse1.o raid6sse2.o
|
|
hostprogs-y += mktables
|
|
|
|
# Note: link order is important. All raid personalities
|
|
# and must come before md.o, as they each initialise
|
|
# themselves, and md.o may use the personalities when it
|
|
# auto-initialised.
|
|
|
|
obj-$(CONFIG_MD_LINEAR) += linear.o
|
|
obj-$(CONFIG_MD_RAID0) += raid0.o
|
|
obj-$(CONFIG_MD_RAID1) += raid1.o
|
|
obj-$(CONFIG_MD_RAID10) += raid10.o
|
|
obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o
|
|
obj-$(CONFIG_MD_RAID456) += raid456.o
|
|
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
|
|
obj-$(CONFIG_MD_FAULTY) += faulty.o
|
|
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
|
|
obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
|
|
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
|
|
obj-$(CONFIG_DM_DELAY) += dm-delay.o
|
|
obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
|
|
obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o
|
|
obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o
|
|
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
|
|
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
|
|
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
|
|
obj-$(CONFIG_DM_ZERO) += dm-zero.o
|
|
|
|
quiet_cmd_unroll = UNROLL $@
|
|
cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
|
|
< $< > $@ || ( rm -f $@ && exit 1 )
|
|
|
|
ifeq ($(CONFIG_ALTIVEC),y)
|
|
altivec_flags := -maltivec -mabi=altivec
|
|
endif
|
|
|
|
ifeq ($(CONFIG_DM_UEVENT),y)
|
|
dm-mod-objs += dm-uevent.o
|
|
endif
|
|
|
|
targets += raid6int1.c
|
|
$(obj)/raid6int1.c: UNROLL := 1
|
|
$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
targets += raid6int2.c
|
|
$(obj)/raid6int2.c: UNROLL := 2
|
|
$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
targets += raid6int4.c
|
|
$(obj)/raid6int4.c: UNROLL := 4
|
|
$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
targets += raid6int8.c
|
|
$(obj)/raid6int8.c: UNROLL := 8
|
|
$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
targets += raid6int16.c
|
|
$(obj)/raid6int16.c: UNROLL := 16
|
|
$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
targets += raid6int32.c
|
|
$(obj)/raid6int32.c: UNROLL := 32
|
|
$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
CFLAGS_raid6altivec1.o += $(altivec_flags)
|
|
targets += raid6altivec1.c
|
|
$(obj)/raid6altivec1.c: UNROLL := 1
|
|
$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
CFLAGS_raid6altivec2.o += $(altivec_flags)
|
|
targets += raid6altivec2.c
|
|
$(obj)/raid6altivec2.c: UNROLL := 2
|
|
$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
CFLAGS_raid6altivec4.o += $(altivec_flags)
|
|
targets += raid6altivec4.c
|
|
$(obj)/raid6altivec4.c: UNROLL := 4
|
|
$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
CFLAGS_raid6altivec8.o += $(altivec_flags)
|
|
targets += raid6altivec8.c
|
|
$(obj)/raid6altivec8.c: UNROLL := 8
|
|
$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
|
|
$(call if_changed,unroll)
|
|
|
|
quiet_cmd_mktable = TABLE $@
|
|
cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
|
|
|
|
targets += raid6tables.c
|
|
$(obj)/raid6tables.c: $(obj)/mktables FORCE
|
|
$(call if_changed,mktable)
|