Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/sound/soc/blackfin/bf5xx-i2s.c
Liam Girdwood f0fba2ad1b ASoC: multi-component - ASoC Multi-Component Support 
This patch extends the ASoC API to allow sound cards to have more than one
CODEC and more than one platform DMA controller. This is achieved by dividing
some current ASoC structures that contain both driver data and device data into
structures that only either contain device data or driver data. i.e.

 struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                          +->  struct snd_soc_codec_driver (driver data)

 struct snd_soc_platform --->  struct snd_soc_platform (device data)
                          +->  struct snd_soc_platform_driver (driver data)

 struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                          +->  struct snd_soc_dai_driver (driver data)

 struct snd_soc_device   --->  deleted

This now allows ASoC to be more tightly aligned with the Linux driver model and
also means that every ASoC codec, platform and (platform) DAI is a kernel
device. ASoC component private data is now stored as device private data.

The ASoC sound card struct snd_soc_card has also been updated to store lists
of it's components rather than a pointer to a codec and platform. The PCM
runtime struct soc_pcm_runtime now has pointers to all its components.

This patch adds DAPM support for ASoC multi-component and removes struct
snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
or runtime PCM level basis rather than using snd_soc_socdev.

Other notable multi-component changes:-

 * Stream operations now de-reference less structures.
 * close_delayed work() now runs on a DAI basis rather than looping all DAIs
   in a card.
 * PM suspend()/resume() operations can now handle N CODECs and Platforms
   per sound card.
 * Added soc_bind_dai_link() to bind the component devices to the sound card.
 * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
   DAI link components.
 * sysfs entries can now be registered per component per card.
 * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
 * snd_soc_register_codec() now does all the codec list and mutex init.

This patch changes the probe() and remove() of the CODEC drivers as follows:-

 o Make CODEC driver a platform driver
 o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
 o Removed all static codec pointers (drivers now support > 1 codec dev)
 o snd_soc_register_pcms() now done by core.
 o snd_soc_register_dai() folded into snd_soc_register_codec().

CS4270 portions:
Acked-by: Timur Tabi <timur@freescale.com>

Some TLV320aic23 and Cirrus platform fixes.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

TI CODEC and OMAP fixes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>

Samsung platform and misc fixes :-
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>

MPC8610 and PPC fixes.
Signed-off-by: Timur Tabi <timur@freescale.com>

i.MX fixes and some core fixes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

J4740 platform fixes:-
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

CC: Tony Lindgren <tony@atomide.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
CC: Daniel Gloeckner <dg@emlix.com>
CC: Manuel Lauss <mano@roarinelk.homelinux.net>
CC: Mike Frysinger <vapier.adi@gmail.com>
CC: Arnaud Patard <apatard@mandriva.com>
CC: Wan ZongShun <mcuos.com@gmail.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12 14:00:00 +01:00

334 lines
8 KiB
C
Raw Blame History

/*
* File: sound/soc/blackfin/bf5xx-i2s.c
* Author: Cliff Cai <Cliff.Cai@analog.com>
*
* Created: Tue June 06 2008
* Description: Blackfin I2S CPU DAI driver
*
* Modified:
* Copyright 2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <asm/irq.h>
#include <asm/portmux.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include "bf5xx-sport.h"
struct bf5xx_i2s_port {
u16 tcr1;
u16 rcr1;
u16 tcr2;
u16 rcr2;
int configured;
};
static struct bf5xx_i2s_port bf5xx_i2s;
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
static struct sport_param sport_params[2] = {
{
.dma_rx_chan = CH_SPORT0_RX,
.dma_tx_chan = CH_SPORT0_TX,
.err_irq = IRQ_SPORT0_ERROR,
.regs = (struct sport_register *)SPORT0_TCR1,
},
{
.dma_rx_chan = CH_SPORT1_RX,
.dma_tx_chan = CH_SPORT1_TX,
.err_irq = IRQ_SPORT1_ERROR,
.regs = (struct sport_register *)SPORT1_TCR1,
}
};
/*
* Setting the TFS pin selector for SPORT 0 based on whether the selected
* port id F or G. If the port is F then no conflict should exist for the
* TFS. When Port G is selected and EMAC then there is a conflict between
* the PHY interrupt line and TFS. Current settings prevent the conflict
* by ignoring the TFS pin when Port G is selected. This allows both
* codecs and EMAC using Port G concurrently.
*/
#ifdef CONFIG_BF527_SPORT0_PORTG
#define LOCAL_SPORT0_TFS (0)
#else
#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
#endif
static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };
static int bf5xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
int ret = 0;
/* interface format:support I2S,slave mode */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
bf5xx_i2s.tcr1 |= TFSR | TCKFE;
bf5xx_i2s.rcr1 |= RFSR | RCKFE;
bf5xx_i2s.tcr2 |= TSFSE;
bf5xx_i2s.rcr2 |= RSFSE;
break;
case SND_SOC_DAIFMT_DSP_A:
bf5xx_i2s.tcr1 |= TFSR;
bf5xx_i2s.rcr1 |= RFSR;
break;
case SND_SOC_DAIFMT_LEFT_J:
ret = -EINVAL;
break;
default:
printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
ret = -EINVAL;
break;
}
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
break;
case SND_SOC_DAIFMT_CBS_CFS:
case SND_SOC_DAIFMT_CBM_CFS:
case SND_SOC_DAIFMT_CBS_CFM:
ret = -EINVAL;
break;
default:
printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
ret = -EINVAL;
break;
}
return ret;
}
static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
int ret = 0;
bf5xx_i2s.tcr2 &= ~0x1f;
bf5xx_i2s.rcr2 &= ~0x1f;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
bf5xx_i2s.tcr2 |= 15;
bf5xx_i2s.rcr2 |= 15;
sport_handle->wdsize = 2;
break;
case SNDRV_PCM_FORMAT_S24_LE:
bf5xx_i2s.tcr2 |= 23;
bf5xx_i2s.rcr2 |= 23;
sport_handle->wdsize = 3;
break;
case SNDRV_PCM_FORMAT_S32_LE:
bf5xx_i2s.tcr2 |= 31;
bf5xx_i2s.rcr2 |= 31;
sport_handle->wdsize = 4;
break;
}
if (!bf5xx_i2s.configured) {
/*
* TX and RX are not independent,they are enabled at the
* same time, even if only one side is running. So, we
* need to configure both of them at the time when the first
* stream is opened.
*
* CPU DAI:slave mode.
*/
bf5xx_i2s.configured = 1;
ret = sport_config_rx(sport_handle, bf5xx_i2s.rcr1,
bf5xx_i2s.rcr2, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_tx(sport_handle, bf5xx_i2s.tcr1,
bf5xx_i2s.tcr2, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
}
return 0;
}
static void bf5xx_i2s_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
/* No active stream, SPORT is allowed to be configured again. */
if (!dai->active)
bf5xx_i2s.configured = 0;
}
static int bf5xx_i2s_probe(struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
pr_err("Requesting Peripherals failed\n");
return -EFAULT;
}
/* request DMA for SPORT */
sport_handle = sport_init(&sport_params[sport_num], 4, \
2 * sizeof(u32), NULL);
if (!sport_handle) {
peripheral_free_list(&sport_req[sport_num][0]);
return -ENODEV;
}
return 0;
}
static int bf5xx_i2s_remove(struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
peripheral_free_list(&sport_req[sport_num][0]);
return 0;
}
#ifdef CONFIG_PM
static int bf5xx_i2s_suspend(struct snd_soc_dai *dai)
{
pr_debug("%s : sport %d\n", __func__, dai->id);
if (dai->capture_active)
sport_rx_stop(sport_handle);
if (dai->playback_active)
sport_tx_stop(sport_handle);
return 0;
}
static int bf5xx_i2s_resume(struct snd_soc_dai *dai)
{
int ret;
pr_debug("%s : sport %d\n", __func__, dai->id);
ret = sport_config_rx(sport_handle, bf5xx_i2s.rcr1,
bf5xx_i2s.rcr2, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_tx(sport_handle, bf5xx_i2s.tcr1,
bf5xx_i2s.tcr2, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
return 0;
}
#else
#define bf5xx_i2s_suspend NULL
#define bf5xx_i2s_resume NULL
#endif
#define BF5XX_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_96000)
#define BF5XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |\
SNDRV_PCM_FMTBIT_S32_LE)
static struct snd_soc_dai_ops bf5xx_i2s_dai_ops = {
.shutdown = bf5xx_i2s_shutdown,
.hw_params = bf5xx_i2s_hw_params,
.set_fmt = bf5xx_i2s_set_dai_fmt,
};
static struct snd_soc_dai_driver bf5xx_i2s_dai = {
.probe = bf5xx_i2s_probe,
.remove = bf5xx_i2s_remove,
.suspend = bf5xx_i2s_suspend,
.resume = bf5xx_i2s_resume,
.playback = {
.channels_min = 1,
.channels_max = 2,
.rates = BF5XX_I2S_RATES,
.formats = BF5XX_I2S_FORMATS,},
.capture = {
.channels_min = 1,
.channels_max = 2,
.rates = BF5XX_I2S_RATES,
.formats = BF5XX_I2S_FORMATS,},
.ops = &bf5xx_i2s_dai_ops,
};
static int bfin_i2s_drv_probe(struct platform_device *pdev)
{
return snd_soc_register_dai(&pdev->dev, &bf5xx_i2s_dai);
}
static int __devexit bfin_i2s_drv_remove(struct platform_device *pdev)
{
snd_soc_unregister_dai(&pdev->dev);
return 0;
}
static struct platform_driver bfin_i2s_driver = {
.probe = bfin_i2s_drv_probe,
.remove = __devexit_p(bfin_i2s_drv_remove),
.driver = {
.name = "bf5xx-i2s",
.owner = THIS_MODULE,
},
};
static int __init bfin_i2s_init(void)
{
return platform_driver_register(&bfin_i2s_driver);
}
static void __exit bfin_i2s_exit(void)
{
platform_driver_unregister(&bfin_i2s_driver);
}
module_init(bfin_i2s_init);
module_exit(bfin_i2s_exit);
/* Module information */
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("I2S driver for ADI Blackfin");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink