kernel-fxtec-pro1x/drivers/s390/cio/cio.h
Martin Schwidefsky 1f44a22577 s390: convert interrupt handling to use generic hardirq
With the introduction of PCI it became apparent that s390 should
convert to generic hardirqs as too many drivers do not have the
correct dependency for GENERIC_HARDIRQS. On the architecture
level s390 does not have irq lines. It has external interrupts,
I/O interrupts and adapter interrupts. This patch hard-codes all
external interrupts as irq #1, all I/O interrupts as irq #2 and
all adapter interrupts as irq #3. The additional information from
the lowcore associated with the interrupt is stored in the
pt_regs of the interrupt frame, where the interrupt handler can
pick it up. For PCI/MSI interrupts the adapter interrupt handler
scans the relevant bit fields and calls generic_handle_irq with
the virtual irq number for the MSI interrupt.

Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22 12:20:04 +02:00

135 lines
4.1 KiB
C

#ifndef S390_CIO_H
#define S390_CIO_H
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <asm/chpid.h>
#include <asm/cio.h>
#include <asm/fcx.h>
#include <asm/schid.h>
#include "chsc.h"
/*
* path management control word
*/
struct pmcw {
u32 intparm; /* interruption parameter */
u32 qf : 1; /* qdio facility */
u32 w : 1;
u32 isc : 3; /* interruption sublass */
u32 res5 : 3; /* reserved zeros */
u32 ena : 1; /* enabled */
u32 lm : 2; /* limit mode */
u32 mme : 2; /* measurement-mode enable */
u32 mp : 1; /* multipath mode */
u32 tf : 1; /* timing facility */
u32 dnv : 1; /* device number valid */
u32 dev : 16; /* device number */
u8 lpm; /* logical path mask */
u8 pnom; /* path not operational mask */
u8 lpum; /* last path used mask */
u8 pim; /* path installed mask */
u16 mbi; /* measurement-block index */
u8 pom; /* path operational mask */
u8 pam; /* path available mask */
u8 chpid[8]; /* CHPID 0-7 (if available) */
u32 unused1 : 8; /* reserved zeros */
u32 st : 3; /* subchannel type */
u32 unused2 : 18; /* reserved zeros */
u32 mbfc : 1; /* measurement block format control */
u32 xmwme : 1; /* extended measurement word mode enable */
u32 csense : 1; /* concurrent sense; can be enabled ...*/
/* ... per MSCH, however, if facility */
/* ... is not installed, this results */
/* ... in an operand exception. */
} __attribute__ ((packed));
/* Target SCHIB configuration. */
struct schib_config {
u64 mba;
u32 intparm;
u16 mbi;
u32 isc:3;
u32 ena:1;
u32 mme:2;
u32 mp:1;
u32 csense:1;
u32 mbfc:1;
} __attribute__ ((packed));
/*
* subchannel information block
*/
struct schib {
struct pmcw pmcw; /* path management control word */
union scsw scsw; /* subchannel status word */
__u64 mba; /* measurement block address */
__u8 mda[4]; /* model dependent area */
} __attribute__ ((packed,aligned(4)));
/*
* When rescheduled, todo's with higher values will overwrite those
* with lower values.
*/
enum sch_todo {
SCH_TODO_NOTHING,
SCH_TODO_EVAL,
SCH_TODO_UNREG,
};
/* subchannel data structure used by I/O subroutines */
struct subchannel {
struct subchannel_id schid;
spinlock_t *lock; /* subchannel lock */
struct mutex reg_mutex;
enum {
SUBCHANNEL_TYPE_IO = 0,
SUBCHANNEL_TYPE_CHSC = 1,
SUBCHANNEL_TYPE_MSG = 2,
SUBCHANNEL_TYPE_ADM = 3,
} st; /* subchannel type */
__u8 vpm; /* verified path mask */
__u8 lpm; /* logical path mask */
__u8 opm; /* operational path mask */
struct schib schib; /* subchannel information block */
int isc; /* desired interruption subclass */
struct chsc_ssd_info ssd_info; /* subchannel description */
struct device dev; /* entry in device tree */
struct css_driver *driver;
enum sch_todo todo;
struct work_struct todo_work;
struct schib_config config;
} __attribute__ ((aligned(8)));
#define to_subchannel(n) container_of(n, struct subchannel, dev)
extern int cio_validate_subchannel (struct subchannel *, struct subchannel_id);
extern int cio_enable_subchannel(struct subchannel *, u32);
extern int cio_disable_subchannel (struct subchannel *);
extern int cio_cancel (struct subchannel *);
extern int cio_clear (struct subchannel *);
extern int cio_resume (struct subchannel *);
extern int cio_halt (struct subchannel *);
extern int cio_start (struct subchannel *, struct ccw1 *, __u8);
extern int cio_start_key (struct subchannel *, struct ccw1 *, __u8, __u8);
extern int cio_cancel (struct subchannel *);
extern int cio_set_options (struct subchannel *, int);
extern int cio_update_schib(struct subchannel *sch);
extern int cio_commit_config(struct subchannel *sch);
int cio_tm_start_key(struct subchannel *sch, struct tcw *tcw, u8 lpm, u8 key);
int cio_tm_intrg(struct subchannel *sch);
/* Use with care. */
#ifdef CONFIG_CCW_CONSOLE
extern struct subchannel *cio_probe_console(void);
extern int cio_is_console(struct subchannel_id);
extern void cio_register_early_subchannels(void);
extern void cio_tsch(struct subchannel *sch);
#else
#define cio_is_console(schid) 0
static inline void cio_register_early_subchannels(void) {}
#endif
#endif