da989e0bc7
Move the ngene/ddbridge firmware into their drivers. There are two reasons for that: 1) The firmware used there didn't work for a few devices I tested here (Terratec H5, H6 and H7); 2) At least Terratec H7 doesn't seem to require a firmware for it to work. After this change, if firmware is not specified, the driver will use a rom-based firmware (this seems to be the case for Terratec H7, although I need to better check the USB dumps to be sure about that). In any case, the firmware seems to be optional, as the DRX-K driver don't return the firmware load error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
559 lines
16 KiB
C
559 lines
16 KiB
C
/*
|
|
* ngene-cards.c: nGene PCIe bridge driver - card specific info
|
|
*
|
|
* Copyright (C) 2005-2007 Micronas
|
|
*
|
|
* Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
|
|
* Modifications for new nGene firmware,
|
|
* support for EEPROM-copying,
|
|
* support for new dual DVB-S2 card prototype
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 only, as published by the Free Software Foundation.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA
|
|
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
|
|
#include "ngene.h"
|
|
|
|
/* demods/tuners */
|
|
#include "stv6110x.h"
|
|
#include "stv090x.h"
|
|
#include "lnbh24.h"
|
|
#include "lgdt330x.h"
|
|
#include "mt2131.h"
|
|
#include "tda18271c2dd.h"
|
|
#include "drxk.h"
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Demod/tuner attachment ***************************************************/
|
|
/****************************************************************************/
|
|
|
|
static int tuner_attach_stv6110(struct ngene_channel *chan)
|
|
{
|
|
struct i2c_adapter *i2c;
|
|
struct stv090x_config *feconf = (struct stv090x_config *)
|
|
chan->dev->card_info->fe_config[chan->number];
|
|
struct stv6110x_config *tunerconf = (struct stv6110x_config *)
|
|
chan->dev->card_info->tuner_config[chan->number];
|
|
struct stv6110x_devctl *ctl;
|
|
|
|
/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
|
|
if (chan->number < 2)
|
|
i2c = &chan->dev->channel[0].i2c_adapter;
|
|
else
|
|
i2c = &chan->dev->channel[1].i2c_adapter;
|
|
|
|
ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c);
|
|
if (ctl == NULL) {
|
|
printk(KERN_ERR DEVICE_NAME ": No STV6110X found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
feconf->tuner_init = ctl->tuner_init;
|
|
feconf->tuner_sleep = ctl->tuner_sleep;
|
|
feconf->tuner_set_mode = ctl->tuner_set_mode;
|
|
feconf->tuner_set_frequency = ctl->tuner_set_frequency;
|
|
feconf->tuner_get_frequency = ctl->tuner_get_frequency;
|
|
feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
|
|
feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
|
|
feconf->tuner_set_bbgain = ctl->tuner_set_bbgain;
|
|
feconf->tuner_get_bbgain = ctl->tuner_get_bbgain;
|
|
feconf->tuner_set_refclk = ctl->tuner_set_refclk;
|
|
feconf->tuner_get_status = ctl->tuner_get_status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
struct ngene_channel *chan = fe->sec_priv;
|
|
int status;
|
|
|
|
if (enable) {
|
|
down(&chan->dev->pll_mutex);
|
|
status = chan->gate_ctrl(fe, 1);
|
|
} else {
|
|
status = chan->gate_ctrl(fe, 0);
|
|
up(&chan->dev->pll_mutex);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int tuner_attach_tda18271(struct ngene_channel *chan)
|
|
{
|
|
struct i2c_adapter *i2c;
|
|
struct dvb_frontend *fe;
|
|
|
|
i2c = &chan->dev->channel[0].i2c_adapter;
|
|
if (chan->fe->ops.i2c_gate_ctrl)
|
|
chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
|
|
fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
|
|
if (chan->fe->ops.i2c_gate_ctrl)
|
|
chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
|
|
if (!fe) {
|
|
printk(KERN_ERR "No TDA18271 found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tuner_attach_probe(struct ngene_channel *chan)
|
|
{
|
|
if (chan->demod_type == 0)
|
|
return tuner_attach_stv6110(chan);
|
|
if (chan->demod_type == 1)
|
|
return tuner_attach_tda18271(chan);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int demod_attach_stv0900(struct ngene_channel *chan)
|
|
{
|
|
struct i2c_adapter *i2c;
|
|
struct stv090x_config *feconf = (struct stv090x_config *)
|
|
chan->dev->card_info->fe_config[chan->number];
|
|
|
|
/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
|
|
/* Note: Both adapters share the same i2c bus, but the demod */
|
|
/* driver requires that each demod has its own i2c adapter */
|
|
if (chan->number < 2)
|
|
i2c = &chan->dev->channel[0].i2c_adapter;
|
|
else
|
|
i2c = &chan->dev->channel[1].i2c_adapter;
|
|
|
|
chan->fe = dvb_attach(stv090x_attach, feconf, i2c,
|
|
(chan->number & 1) == 0 ? STV090x_DEMODULATOR_0
|
|
: STV090x_DEMODULATOR_1);
|
|
if (chan->fe == NULL) {
|
|
printk(KERN_ERR DEVICE_NAME ": No STV0900 found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* store channel info */
|
|
if (feconf->tuner_i2c_lock)
|
|
chan->fe->analog_demod_priv = chan;
|
|
|
|
if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0,
|
|
0, chan->dev->card_info->lnb[chan->number])) {
|
|
printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n");
|
|
dvb_frontend_detach(chan->fe);
|
|
chan->fe = NULL;
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
|
|
{
|
|
struct ngene_channel *chan = fe->analog_demod_priv;
|
|
|
|
if (lock)
|
|
down(&chan->dev->pll_mutex);
|
|
else
|
|
up(&chan->dev->pll_mutex);
|
|
}
|
|
|
|
static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
|
|
{
|
|
struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD,
|
|
.buf = val, .len = 1 } };
|
|
return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
|
|
}
|
|
|
|
static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
|
|
u16 reg, u8 *val)
|
|
{
|
|
u8 msg[2] = {reg>>8, reg&0xff};
|
|
struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
|
|
.buf = msg, .len = 2},
|
|
{.addr = adr, .flags = I2C_M_RD,
|
|
.buf = val, .len = 1} };
|
|
return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
|
|
}
|
|
|
|
static int port_has_stv0900(struct i2c_adapter *i2c, int port)
|
|
{
|
|
u8 val;
|
|
if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int port_has_drxk(struct i2c_adapter *i2c, int port)
|
|
{
|
|
u8 val;
|
|
|
|
if (i2c_read(i2c, 0x29+port, &val) < 0)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int demod_attach_drxk(struct ngene_channel *chan,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct drxk_config config;
|
|
|
|
memset(&config, 0, sizeof(config));
|
|
config.microcode_name = "drxk_a3.mc";
|
|
config.adr = 0x29 + (chan->number ^ 2);
|
|
|
|
chan->fe = dvb_attach(drxk_attach, &config, i2c);
|
|
if (!chan->fe) {
|
|
printk(KERN_ERR "No DRXK found!\n");
|
|
return -ENODEV;
|
|
}
|
|
chan->fe->sec_priv = chan;
|
|
chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
|
|
chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
|
|
return 0;
|
|
}
|
|
|
|
static int cineS2_probe(struct ngene_channel *chan)
|
|
{
|
|
struct i2c_adapter *i2c;
|
|
struct stv090x_config *fe_conf;
|
|
u8 buf[3];
|
|
struct i2c_msg i2c_msg = { .flags = 0, .buf = buf };
|
|
int rc;
|
|
|
|
/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
|
|
if (chan->number < 2)
|
|
i2c = &chan->dev->channel[0].i2c_adapter;
|
|
else
|
|
i2c = &chan->dev->channel[1].i2c_adapter;
|
|
|
|
if (port_has_stv0900(i2c, chan->number)) {
|
|
chan->demod_type = 0;
|
|
fe_conf = chan->dev->card_info->fe_config[chan->number];
|
|
/* demod found, attach it */
|
|
rc = demod_attach_stv0900(chan);
|
|
if (rc < 0 || chan->number < 2)
|
|
return rc;
|
|
|
|
/* demod #2: reprogram outputs DPN1 & DPN2 */
|
|
i2c_msg.addr = fe_conf->address;
|
|
i2c_msg.len = 3;
|
|
buf[0] = 0xf1;
|
|
switch (chan->number) {
|
|
case 2:
|
|
buf[1] = 0x5c;
|
|
buf[2] = 0xc2;
|
|
break;
|
|
case 3:
|
|
buf[1] = 0x61;
|
|
buf[2] = 0xcc;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
rc = i2c_transfer(i2c, &i2c_msg, 1);
|
|
if (rc != 1) {
|
|
printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
|
|
return -EIO;
|
|
}
|
|
} else if (port_has_drxk(i2c, chan->number^2)) {
|
|
chan->demod_type = 1;
|
|
demod_attach_drxk(chan, i2c);
|
|
} else {
|
|
printk(KERN_ERR "No demod found on chan %d\n", chan->number);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct lgdt330x_config aver_m780 = {
|
|
.demod_address = 0xb2 >> 1,
|
|
.demod_chip = LGDT3303,
|
|
.serial_mpeg = 0x00, /* PARALLEL */
|
|
.clock_polarity_flip = 1,
|
|
};
|
|
|
|
static struct mt2131_config m780_tunerconfig = {
|
|
0xc0 >> 1
|
|
};
|
|
|
|
/* A single func to attach the demo and tuner, rather than
|
|
* use two sep funcs like the current design mandates.
|
|
*/
|
|
static int demod_attach_lg330x(struct ngene_channel *chan)
|
|
{
|
|
chan->fe = dvb_attach(lgdt330x_attach, &aver_m780, &chan->i2c_adapter);
|
|
if (chan->fe == NULL) {
|
|
printk(KERN_ERR DEVICE_NAME ": No LGDT330x found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter,
|
|
&m780_tunerconfig, 0);
|
|
|
|
return (chan->fe) ? 0 : -ENODEV;
|
|
}
|
|
|
|
/****************************************************************************/
|
|
/* Switch control (I2C gates, etc.) *****************************************/
|
|
/****************************************************************************/
|
|
|
|
|
|
static struct stv090x_config fe_cineS2 = {
|
|
.device = STV0900,
|
|
.demod_mode = STV090x_DUAL,
|
|
.clk_mode = STV090x_CLK_EXT,
|
|
|
|
.xtal = 27000000,
|
|
.address = 0x68,
|
|
|
|
.ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
|
|
.ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
|
|
|
|
.repeater_level = STV090x_RPTLEVEL_16,
|
|
|
|
.adc1_range = STV090x_ADC_1Vpp,
|
|
.adc2_range = STV090x_ADC_1Vpp,
|
|
|
|
.diseqc_envelope_mode = true,
|
|
|
|
.tuner_i2c_lock = cineS2_tuner_i2c_lock,
|
|
};
|
|
|
|
static struct stv090x_config fe_cineS2_2 = {
|
|
.device = STV0900,
|
|
.demod_mode = STV090x_DUAL,
|
|
.clk_mode = STV090x_CLK_EXT,
|
|
|
|
.xtal = 27000000,
|
|
.address = 0x69,
|
|
|
|
.ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
|
|
.ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
|
|
|
|
.repeater_level = STV090x_RPTLEVEL_16,
|
|
|
|
.adc1_range = STV090x_ADC_1Vpp,
|
|
.adc2_range = STV090x_ADC_1Vpp,
|
|
|
|
.diseqc_envelope_mode = true,
|
|
|
|
.tuner_i2c_lock = cineS2_tuner_i2c_lock,
|
|
};
|
|
|
|
static struct stv6110x_config tuner_cineS2_0 = {
|
|
.addr = 0x60,
|
|
.refclk = 27000000,
|
|
.clk_div = 1,
|
|
};
|
|
|
|
static struct stv6110x_config tuner_cineS2_1 = {
|
|
.addr = 0x63,
|
|
.refclk = 27000000,
|
|
.clk_div = 1,
|
|
};
|
|
|
|
static struct ngene_info ngene_info_cineS2 = {
|
|
.type = NGENE_SIDEWINDER,
|
|
.name = "Linux4Media cineS2 DVB-S2 Twin Tuner",
|
|
.io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN},
|
|
.demod_attach = {demod_attach_stv0900, demod_attach_stv0900},
|
|
.tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110},
|
|
.fe_config = {&fe_cineS2, &fe_cineS2},
|
|
.tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1},
|
|
.lnb = {0x0b, 0x08},
|
|
.tsf = {3, 3},
|
|
.fw_version = 18,
|
|
.msi_supported = true,
|
|
};
|
|
|
|
static struct ngene_info ngene_info_satixS2 = {
|
|
.type = NGENE_SIDEWINDER,
|
|
.name = "Mystique SaTiX-S2 Dual",
|
|
.io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN},
|
|
.demod_attach = {demod_attach_stv0900, demod_attach_stv0900},
|
|
.tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110},
|
|
.fe_config = {&fe_cineS2, &fe_cineS2},
|
|
.tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1},
|
|
.lnb = {0x0b, 0x08},
|
|
.tsf = {3, 3},
|
|
.fw_version = 18,
|
|
.msi_supported = true,
|
|
};
|
|
|
|
static struct ngene_info ngene_info_satixS2v2 = {
|
|
.type = NGENE_SIDEWINDER,
|
|
.name = "Mystique SaTiX-S2 Dual (v2)",
|
|
.io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
|
|
NGENE_IO_TSOUT},
|
|
.demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
|
|
.tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
|
|
.fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
|
|
.tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
|
|
.lnb = {0x0a, 0x08, 0x0b, 0x09},
|
|
.tsf = {3, 3},
|
|
.fw_version = 18,
|
|
.msi_supported = true,
|
|
};
|
|
|
|
static struct ngene_info ngene_info_cineS2v5 = {
|
|
.type = NGENE_SIDEWINDER,
|
|
.name = "Linux4Media cineS2 DVB-S2 Twin Tuner (v5)",
|
|
.io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
|
|
NGENE_IO_TSOUT},
|
|
.demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
|
|
.tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
|
|
.fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
|
|
.tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
|
|
.lnb = {0x0a, 0x08, 0x0b, 0x09},
|
|
.tsf = {3, 3},
|
|
.fw_version = 18,
|
|
.msi_supported = true,
|
|
};
|
|
|
|
|
|
static struct ngene_info ngene_info_duoFlex = {
|
|
.type = NGENE_SIDEWINDER,
|
|
.name = "Digital Devices DuoFlex PCIe or miniPCIe",
|
|
.io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
|
|
NGENE_IO_TSOUT},
|
|
.demod_attach = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe},
|
|
.tuner_attach = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe},
|
|
.fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
|
|
.tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
|
|
.lnb = {0x0a, 0x08, 0x0b, 0x09},
|
|
.tsf = {3, 3},
|
|
.fw_version = 18,
|
|
.msi_supported = true,
|
|
};
|
|
|
|
static struct ngene_info ngene_info_m780 = {
|
|
.type = NGENE_APP,
|
|
.name = "Aver M780 ATSC/QAM-B",
|
|
|
|
/* Channel 0 is analog, which is currently unsupported */
|
|
.io_type = { NGENE_IO_NONE, NGENE_IO_TSIN },
|
|
.demod_attach = { NULL, demod_attach_lg330x },
|
|
|
|
/* Ensure these are NULL else the frame will call them (as funcs) */
|
|
.tuner_attach = { 0, 0, 0, 0 },
|
|
.fe_config = { NULL, &aver_m780 },
|
|
.avf = { 0 },
|
|
|
|
/* A custom electrical interface config for the demod to bridge */
|
|
.tsf = { 4, 4 },
|
|
.fw_version = 15,
|
|
};
|
|
|
|
/****************************************************************************/
|
|
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Subsystem ID *********************************************************/
|
|
/****************************************************************************/
|
|
|
|
#define NGENE_ID(_subvend, _subdev, _driverdata) { \
|
|
.vendor = NGENE_VID, .device = NGENE_PID, \
|
|
.subvendor = _subvend, .subdevice = _subdev, \
|
|
.driver_data = (unsigned long) &_driverdata }
|
|
|
|
/****************************************************************************/
|
|
|
|
static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
|
|
NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2),
|
|
NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2),
|
|
NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
|
|
NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
|
|
NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
|
|
NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex),
|
|
NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex),
|
|
NGENE_ID(0x1461, 0x062e, ngene_info_m780),
|
|
{0}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ngene_id_tbl);
|
|
|
|
/****************************************************************************/
|
|
/* Init/Exit ****************************************************************/
|
|
/****************************************************************************/
|
|
|
|
static pci_ers_result_t ngene_error_detected(struct pci_dev *dev,
|
|
enum pci_channel_state state)
|
|
{
|
|
printk(KERN_ERR DEVICE_NAME ": PCI error\n");
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
if (state == pci_channel_io_frozen)
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
return PCI_ERS_RESULT_CAN_RECOVER;
|
|
}
|
|
|
|
static pci_ers_result_t ngene_link_reset(struct pci_dev *dev)
|
|
{
|
|
printk(KERN_INFO DEVICE_NAME ": link reset\n");
|
|
return 0;
|
|
}
|
|
|
|
static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev)
|
|
{
|
|
printk(KERN_INFO DEVICE_NAME ": slot reset\n");
|
|
return 0;
|
|
}
|
|
|
|
static void ngene_resume(struct pci_dev *dev)
|
|
{
|
|
printk(KERN_INFO DEVICE_NAME ": resume\n");
|
|
}
|
|
|
|
static struct pci_error_handlers ngene_errors = {
|
|
.error_detected = ngene_error_detected,
|
|
.link_reset = ngene_link_reset,
|
|
.slot_reset = ngene_slot_reset,
|
|
.resume = ngene_resume,
|
|
};
|
|
|
|
static struct pci_driver ngene_pci_driver = {
|
|
.name = "ngene",
|
|
.id_table = ngene_id_tbl,
|
|
.probe = ngene_probe,
|
|
.remove = __devexit_p(ngene_remove),
|
|
.err_handler = &ngene_errors,
|
|
.shutdown = ngene_shutdown,
|
|
};
|
|
|
|
static __init int module_init_ngene(void)
|
|
{
|
|
printk(KERN_INFO
|
|
"nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n");
|
|
return pci_register_driver(&ngene_pci_driver);
|
|
}
|
|
|
|
static __exit void module_exit_ngene(void)
|
|
{
|
|
pci_unregister_driver(&ngene_pci_driver);
|
|
}
|
|
|
|
module_init(module_init_ngene);
|
|
module_exit(module_exit_ngene);
|
|
|
|
MODULE_DESCRIPTION("nGene");
|
|
MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel");
|
|
MODULE_LICENSE("GPL");
|