kernel-fxtec-pro1x/arch/microblaze/lib/memcpy.c
Arnd Bergmann 122eec2f02 microblaze: remove cacheable_memcpy
This function is neither declared nor used anywhere
outside of ppc32, so remove it from microblaze.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21 15:56:05 +02:00

156 lines
3.9 KiB
C

/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2007 John Williams
*
* Reasonably optimised generic C-code for memcpy on Microblaze
* This is generic C code to do efficient, alignment-aware memcpy.
*
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
* Attempts were made, unsuccesfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
* This software has been developed by Intel Corporation.
* Intel specifically disclaims all warranties, express or
* implied, and all liability, including consequential and
* other indirect damages, for the use of this program, including
* liability for infringement of any proprietary rights,
* and including the warranties of merchantability and fitness
* for a particular purpose. Intel does not assume any
* responsibility for and errors which may appear in this program
* not any responsibility to update it.
*/
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/compiler.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/system.h>
#ifdef __HAVE_ARCH_MEMCPY
void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
{
const char *src = v_src;
char *dst = v_dst;
#ifndef CONFIG_OPT_LIB_FUNCTION
/* Simple, byte oriented memcpy. */
while (c--)
*dst++ = *src++;
return v_dst;
#else
/* The following code tries to optimize the copy by using unsigned
* alignment. This will work fine if both source and destination are
* aligned on the same boundary. However, if they are aligned on
* different boundaries shifts will be necessary. This might result in
* bad performance on MicroBlaze systems without a barrel shifter.
*/
const uint32_t *i_src;
uint32_t *i_dst;
if (c >= 4) {
unsigned value, buf_hold;
/* Align the dstination to a word boundry. */
/* This is done in an endian independant manner. */
switch ((unsigned long)dst & 3) {
case 1:
*dst++ = *src++;
--c;
case 2:
*dst++ = *src++;
--c;
case 3:
*dst++ = *src++;
--c;
}
i_dst = (void *)dst;
/* Choose a copy scheme based on the source */
/* alignment relative to dstination. */
switch ((unsigned long)src & 3) {
case 0x0: /* Both byte offsets are aligned */
i_src = (const void *)src;
for (; c >= 4; c -= 4)
*i_dst++ = *i_src++;
src = (const void *)i_src;
break;
case 0x1: /* Unaligned - Off by 1 */
/* Word align the source */
i_src = (const void *) ((unsigned)src & ~3);
/* Load the holding buffer */
buf_hold = *i_src++ << 8;
for (; c >= 4; c -= 4) {
value = *i_src++;
*i_dst++ = buf_hold | value >> 24;
buf_hold = value << 8;
}
/* Realign the source */
src = (const void *)i_src;
src -= 3;
break;
case 0x2: /* Unaligned - Off by 2 */
/* Word align the source */
i_src = (const void *) ((unsigned)src & ~3);
/* Load the holding buffer */
buf_hold = *i_src++ << 16;
for (; c >= 4; c -= 4) {
value = *i_src++;
*i_dst++ = buf_hold | value >> 16;
buf_hold = value << 16;
}
/* Realign the source */
src = (const void *)i_src;
src -= 2;
break;
case 0x3: /* Unaligned - Off by 3 */
/* Word align the source */
i_src = (const void *) ((unsigned)src & ~3);
/* Load the holding buffer */
buf_hold = *i_src++ << 24;
for (; c >= 4; c -= 4) {
value = *i_src++;
*i_dst++ = buf_hold | value >> 8;
buf_hold = value << 24;
}
/* Realign the source */
src = (const void *)i_src;
src -= 1;
break;
}
dst = (void *)i_dst;
}
/* Finish off any remaining bytes */
/* simple fast copy, ... unless a cache boundry is crossed */
switch (c) {
case 3:
*dst++ = *src++;
case 2:
*dst++ = *src++;
case 1:
*dst++ = *src++;
}
return v_dst;
#endif
}
EXPORT_SYMBOL(memcpy);
#endif /* __HAVE_ARCH_MEMCPY */