32abb4788d
LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf Tested on OMAP4430 (bryan.wu@canonical.com: use module_i2c_driver() rather than lm3556_init/lm3556_exit for code simplicity; fixed some typo pointed out by Rob Landley) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Kim, Milo <Milo.Kim@ti.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
85 lines
2.9 KiB
Text
85 lines
2.9 KiB
Text
Kernel driver for lm3556
|
|
========================
|
|
|
|
*Texas Instrument:
|
|
1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
|
|
* Datasheet: http://www.national.com/ds/LM/LM3556.pdf
|
|
|
|
Authors:
|
|
Daniel Jeong
|
|
Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
|
|
|
|
Description
|
|
-----------
|
|
There are 3 functions in LM3556, Flash, Torch and Indicator.
|
|
|
|
FLASH MODE
|
|
In Flash Mode, the LED current source(LED) provides 16 target current levels
|
|
from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
|
|
CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
|
|
or by pulling the STROBE pin HIGH.
|
|
LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
|
|
* if STROBE pin is enabled, below example control brightness only, and
|
|
ON / OFF will be controlled by STROBE pin.
|
|
|
|
Flash Example:
|
|
OFF : #echo 0 > sys/class/leds/flash/brightness
|
|
93.75 mA: #echo 1 > sys/class/leds/flash/brightness
|
|
... .....
|
|
1500 mA: #echo 16 > sys/class/leds/flash/brightness
|
|
|
|
TORCH MODE
|
|
In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
|
|
REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
|
|
hardware TORCH input.
|
|
LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
|
|
* if TORCH pin is enabled, below example control brightness only,
|
|
and ON / OFF will be controlled by TORCH pin.
|
|
|
|
Torch Example:
|
|
OFF : #echo 0 > sys/class/leds/torch/brightness
|
|
46.88 mA: #echo 1 > sys/class/leds/torch/brightness
|
|
... .....
|
|
375 mA : #echo 8 > sys/class/leds/torch/brightness
|
|
|
|
INDICATOR MODE
|
|
Indicator pattern can be set through sys/class/leds/indicator/pattern file,
|
|
and 4 patterns are pre-defined in indicator_pattern array.
|
|
According to N-lank, Pulse time and N Period values, different pattern wiill
|
|
be generated.If you want new patterns for your own device, change
|
|
indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
|
|
Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
|
|
|
|
Indicator pattern example:
|
|
pattern 0: #echo 0 > sys/class/leds/indicator/pattern
|
|
....
|
|
pattern 3: #echo 3 > sys/class/leds/indicator/pattern
|
|
|
|
Indicator brightness can be controlled through
|
|
sys/class/leds/indicator/brightness file.
|
|
|
|
Example:
|
|
OFF : #echo 0 > sys/class/leds/indicator/brightness
|
|
5.86 mA : #echo 1 > sys/class/leds/indicator/brightness
|
|
........
|
|
46.875mA : #echo 8 > sys/class/leds/indicator/brightness
|
|
|
|
Notes
|
|
-----
|
|
Driver expects it is registered using the i2c_board_info mechanism.
|
|
To register the chip at address 0x63 on specific adapter, set the platform data
|
|
according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
|
|
|
|
Example:
|
|
static struct i2c_board_info __initdata board_i2c_ch4[] = {
|
|
{
|
|
I2C_BOARD_INFO(LM3556_NAME, 0x63),
|
|
.platform_data = &lm3556_pdata,
|
|
},
|
|
};
|
|
|
|
and register it in the platform init function
|
|
|
|
Example:
|
|
board_register_i2c_bus(4, 400,
|
|
board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));
|