kernel-fxtec-pro1x/drivers/s390/cio/qdio.h
Jan Glauber be8d97a540 [S390] qdio: 2nd stage retry on SIGA-W busy conditions
The SIGA-W may return with the busy bit set which means the device was
blocked. The busy loop which retries the SIGA-W for 100us may not be
long enough when running under a heavily loaded hypervisor.

Extend the retry mechanism by adding a longer second stage which retries
the SIGA-W for up to 10s. In difference to the first retry loop the second
stage is using mdelay to stop the cpu between the retries and thereby
avoid additional preassure in on the hypervisor.
If the second stage retry is successfull a device reset is avoided.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 16:44:19 +02:00

475 lines
13 KiB
C

/*
* linux/drivers/s390/cio/qdio.h
*
* Copyright 2000,2009 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
* Jan Glauber <jang@linux.vnet.ibm.com>
*/
#ifndef _CIO_QDIO_H
#define _CIO_QDIO_H
#include <asm/page.h>
#include <asm/schid.h>
#include <asm/debug.h>
#include "chsc.h"
#define QDIO_BUSY_BIT_PATIENCE (100 << 12) /* 100 microseconds */
#define QDIO_BUSY_BIT_RETRY_DELAY 10 /* 10 milliseconds */
#define QDIO_BUSY_BIT_RETRIES 1000 /* = 10s retry time */
#define QDIO_INPUT_THRESHOLD (500 << 12) /* 500 microseconds */
/*
* if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait
* till next initiative to give transmitted skbs back to the stack is too long.
* Therefore polling is started in case of multicast queue is filled more
* than 50 percent.
*/
#define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */
enum qdio_irq_states {
QDIO_IRQ_STATE_INACTIVE,
QDIO_IRQ_STATE_ESTABLISHED,
QDIO_IRQ_STATE_ACTIVE,
QDIO_IRQ_STATE_STOPPED,
QDIO_IRQ_STATE_CLEANUP,
QDIO_IRQ_STATE_ERR,
NR_QDIO_IRQ_STATES,
};
/* used as intparm in do_IO */
#define QDIO_DOING_ESTABLISH 1
#define QDIO_DOING_ACTIVATE 2
#define QDIO_DOING_CLEANUP 3
#define SLSB_STATE_NOT_INIT 0x0
#define SLSB_STATE_EMPTY 0x1
#define SLSB_STATE_PRIMED 0x2
#define SLSB_STATE_HALTED 0xe
#define SLSB_STATE_ERROR 0xf
#define SLSB_TYPE_INPUT 0x0
#define SLSB_TYPE_OUTPUT 0x20
#define SLSB_OWNER_PROG 0x80
#define SLSB_OWNER_CU 0x40
#define SLSB_P_INPUT_NOT_INIT \
(SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_NOT_INIT) /* 0x80 */
#define SLSB_P_INPUT_ACK \
(SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x81 */
#define SLSB_CU_INPUT_EMPTY \
(SLSB_OWNER_CU | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x41 */
#define SLSB_P_INPUT_PRIMED \
(SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_PRIMED) /* 0x82 */
#define SLSB_P_INPUT_HALTED \
(SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_HALTED) /* 0x8e */
#define SLSB_P_INPUT_ERROR \
(SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_ERROR) /* 0x8f */
#define SLSB_P_OUTPUT_NOT_INIT \
(SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_NOT_INIT) /* 0xa0 */
#define SLSB_P_OUTPUT_EMPTY \
(SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_EMPTY) /* 0xa1 */
#define SLSB_CU_OUTPUT_PRIMED \
(SLSB_OWNER_CU | SLSB_TYPE_OUTPUT | SLSB_STATE_PRIMED) /* 0x62 */
#define SLSB_P_OUTPUT_HALTED \
(SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_HALTED) /* 0xae */
#define SLSB_P_OUTPUT_ERROR \
(SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_ERROR) /* 0xaf */
#define SLSB_ERROR_DURING_LOOKUP 0xff
/* additional CIWs returned by extended Sense-ID */
#define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */
#define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */
/* flags for st qdio sch data */
#define CHSC_FLAG_QDIO_CAPABILITY 0x80
#define CHSC_FLAG_VALIDITY 0x40
/* qdio adapter-characteristics-1 flag */
#define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */
#define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */
#define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */
#define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */
#define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */
#define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */
#define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */
/* SIGA flags */
#define QDIO_SIGA_WRITE 0x00
#define QDIO_SIGA_READ 0x01
#define QDIO_SIGA_SYNC 0x02
#define QDIO_SIGA_QEBSM_FLAG 0x80
#ifdef CONFIG_64BIT
static inline int do_sqbs(u64 token, unsigned char state, int queue,
int *start, int *count)
{
register unsigned long _ccq asm ("0") = *count;
register unsigned long _token asm ("1") = token;
unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
asm volatile(
" .insn rsy,0xeb000000008A,%1,0,0(%2)"
: "+d" (_ccq), "+d" (_queuestart)
: "d" ((unsigned long)state), "d" (_token)
: "memory", "cc");
*count = _ccq & 0xff;
*start = _queuestart & 0xff;
return (_ccq >> 32) & 0xff;
}
static inline int do_eqbs(u64 token, unsigned char *state, int queue,
int *start, int *count, int ack)
{
register unsigned long _ccq asm ("0") = *count;
register unsigned long _token asm ("1") = token;
unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
unsigned long _state = (unsigned long)ack << 63;
asm volatile(
" .insn rrf,0xB99c0000,%1,%2,0,0"
: "+d" (_ccq), "+d" (_queuestart), "+d" (_state)
: "d" (_token)
: "memory", "cc");
*count = _ccq & 0xff;
*start = _queuestart & 0xff;
*state = _state & 0xff;
return (_ccq >> 32) & 0xff;
}
#else
static inline int do_sqbs(u64 token, unsigned char state, int queue,
int *start, int *count) { return 0; }
static inline int do_eqbs(u64 token, unsigned char *state, int queue,
int *start, int *count, int ack) { return 0; }
#endif /* CONFIG_64BIT */
struct qdio_irq;
struct siga_flag {
u8 input:1;
u8 output:1;
u8 sync:1;
u8 sync_after_ai:1;
u8 sync_out_after_pci:1;
u8:3;
} __attribute__ ((packed));
struct chsc_ssqd_area {
struct chsc_header request;
u16:10;
u8 ssid:2;
u8 fmt:4;
u16 first_sch;
u16:16;
u16 last_sch;
u32:32;
struct chsc_header response;
u32:32;
struct qdio_ssqd_desc qdio_ssqd;
} __attribute__ ((packed));
struct scssc_area {
struct chsc_header request;
u16 operation_code;
u16:16;
u32:32;
u32:32;
u64 summary_indicator_addr;
u64 subchannel_indicator_addr;
u32 ks:4;
u32 kc:4;
u32:21;
u32 isc:3;
u32 word_with_d_bit;
u32:32;
struct subchannel_id schid;
u32 reserved[1004];
struct chsc_header response;
u32:32;
} __attribute__ ((packed));
struct qdio_dev_perf_stat {
unsigned int adapter_int;
unsigned int qdio_int;
unsigned int pci_request_int;
unsigned int tasklet_inbound;
unsigned int tasklet_inbound_resched;
unsigned int tasklet_inbound_resched2;
unsigned int tasklet_outbound;
unsigned int siga_read;
unsigned int siga_write;
unsigned int siga_sync;
unsigned int inbound_call;
unsigned int inbound_handler;
unsigned int stop_polling;
unsigned int inbound_queue_full;
unsigned int outbound_call;
unsigned int outbound_handler;
unsigned int outbound_queue_full;
unsigned int fast_requeue;
unsigned int target_full;
unsigned int eqbs;
unsigned int eqbs_partial;
unsigned int sqbs;
unsigned int sqbs_partial;
unsigned int int_discarded;
} ____cacheline_aligned;
struct qdio_queue_perf_stat {
/*
* Sorted into order-2 buckets: 1, 2-3, 4-7, ... 64-127, 128.
* Since max. 127 SBALs are scanned reuse entry for 128 as queue full
* aka 127 SBALs found.
*/
unsigned int nr_sbals[8];
unsigned int nr_sbal_error;
unsigned int nr_sbal_nop;
unsigned int nr_sbal_total;
};
enum qdio_queue_irq_states {
QDIO_QUEUE_IRQS_DISABLED,
};
struct qdio_input_q {
/* input buffer acknowledgement flag */
int polling;
/* first ACK'ed buffer */
int ack_start;
/* how much sbals are acknowledged with qebsm */
int ack_count;
/* last time of noticing incoming data */
u64 timestamp;
/* upper-layer polling flag */
unsigned long queue_irq_state;
/* callback to start upper-layer polling */
void (*queue_start_poll) (struct ccw_device *, int, unsigned long);
};
struct qdio_output_q {
/* PCIs are enabled for the queue */
int pci_out_enabled;
/* timer to check for more outbound work */
struct timer_list timer;
/* used SBALs before tasklet schedule */
int scan_threshold;
};
/*
* Note on cache alignment: grouped slsb and write mostly data at the beginning
* sbal[] is read-only and starts on a new cacheline followed by read mostly.
*/
struct qdio_q {
struct slsb slsb;
union {
struct qdio_input_q in;
struct qdio_output_q out;
} u;
/*
* inbound: next buffer the program should check for
* outbound: next buffer to check if adapter processed it
*/
int first_to_check;
/* first_to_check of the last time */
int last_move;
/* beginning position for calling the program */
int first_to_kick;
/* number of buffers in use by the adapter */
atomic_t nr_buf_used;
/* error condition during a data transfer */
unsigned int qdio_error;
struct tasklet_struct tasklet;
struct qdio_queue_perf_stat q_stats;
struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q] ____cacheline_aligned;
/* queue number */
int nr;
/* bitmask of queue number */
int mask;
/* input or output queue */
int is_input_q;
/* list of thinint input queues */
struct list_head entry;
/* upper-layer program handler */
qdio_handler_t (*handler);
struct dentry *debugfs_q;
struct qdio_irq *irq_ptr;
struct sl *sl;
/*
* A page is allocated under this pointer and used for slib and sl.
* slib is 2048 bytes big and sl points to offset PAGE_SIZE / 2.
*/
struct slib *slib;
} __attribute__ ((aligned(256)));
struct qdio_irq {
struct qib qib;
u32 *dsci; /* address of device state change indicator */
struct ccw_device *cdev;
struct dentry *debugfs_dev;
struct dentry *debugfs_perf;
unsigned long int_parm;
struct subchannel_id schid;
unsigned long sch_token; /* QEBSM facility */
enum qdio_irq_states state;
struct siga_flag siga_flag; /* siga sync information from qdioac */
int nr_input_qs;
int nr_output_qs;
struct ccw1 ccw;
struct ciw equeue;
struct ciw aqueue;
struct qdio_ssqd_desc ssqd_desc;
void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *);
int perf_stat_enabled;
struct qdr *qdr;
unsigned long chsc_page;
struct qdio_q *input_qs[QDIO_MAX_QUEUES_PER_IRQ];
struct qdio_q *output_qs[QDIO_MAX_QUEUES_PER_IRQ];
debug_info_t *debug_area;
struct mutex setup_mutex;
struct qdio_dev_perf_stat perf_stat;
};
/* helper functions */
#define queue_type(q) q->irq_ptr->qib.qfmt
#define SCH_NO(q) (q->irq_ptr->schid.sch_no)
#define is_thinint_irq(irq) \
(irq->qib.qfmt == QDIO_IQDIO_QFMT || \
css_general_characteristics.aif_osa)
#define qperf(__qdev, __attr) ((__qdev)->perf_stat.(__attr))
#define qperf_inc(__q, __attr) \
({ \
struct qdio_irq *qdev = (__q)->irq_ptr; \
if (qdev->perf_stat_enabled) \
(qdev->perf_stat.__attr)++; \
})
static inline void account_sbals_error(struct qdio_q *q, int count)
{
q->q_stats.nr_sbal_error += count;
q->q_stats.nr_sbal_total += count;
}
/* the highest iqdio queue is used for multicast */
static inline int multicast_outbound(struct qdio_q *q)
{
return (q->irq_ptr->nr_output_qs > 1) &&
(q->nr == q->irq_ptr->nr_output_qs - 1);
}
#define pci_out_supported(q) \
(q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)
#define is_qebsm(q) (q->irq_ptr->sch_token != 0)
#define need_siga_in(q) (q->irq_ptr->siga_flag.input)
#define need_siga_out(q) (q->irq_ptr->siga_flag.output)
#define need_siga_sync(q) (unlikely(q->irq_ptr->siga_flag.sync))
#define need_siga_sync_after_ai(q) \
(unlikely(q->irq_ptr->siga_flag.sync_after_ai))
#define need_siga_sync_out_after_pci(q) \
(unlikely(q->irq_ptr->siga_flag.sync_out_after_pci))
#define for_each_input_queue(irq_ptr, q, i) \
for (i = 0, q = irq_ptr->input_qs[0]; \
i < irq_ptr->nr_input_qs; \
q = irq_ptr->input_qs[++i])
#define for_each_output_queue(irq_ptr, q, i) \
for (i = 0, q = irq_ptr->output_qs[0]; \
i < irq_ptr->nr_output_qs; \
q = irq_ptr->output_qs[++i])
#define prev_buf(bufnr) \
((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
#define next_buf(bufnr) \
((bufnr + 1) & QDIO_MAX_BUFFERS_MASK)
#define add_buf(bufnr, inc) \
((bufnr + inc) & QDIO_MAX_BUFFERS_MASK)
#define sub_buf(bufnr, dec) \
((bufnr - dec) & QDIO_MAX_BUFFERS_MASK)
#define queue_irqs_enabled(q) \
(test_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state) == 0)
#define queue_irqs_disabled(q) \
(test_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state) != 0)
#define TIQDIO_SHARED_IND 63
/* device state change indicators */
struct indicator_t {
u32 ind; /* u32 because of compare-and-swap performance */
atomic_t count; /* use count, 0 or 1 for non-shared indicators */
};
extern struct indicator_t *q_indicators;
static inline int shared_ind(u32 *dsci)
{
return dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
}
/* prototypes for thin interrupt */
void qdio_setup_thinint(struct qdio_irq *irq_ptr);
int qdio_establish_thinint(struct qdio_irq *irq_ptr);
void qdio_shutdown_thinint(struct qdio_irq *irq_ptr);
void tiqdio_add_input_queues(struct qdio_irq *irq_ptr);
void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr);
void tiqdio_inbound_processing(unsigned long q);
int tiqdio_allocate_memory(void);
void tiqdio_free_memory(void);
int tiqdio_register_thinints(void);
void tiqdio_unregister_thinints(void);
/* prototypes for setup */
void qdio_inbound_processing(unsigned long data);
void qdio_outbound_processing(unsigned long data);
void qdio_outbound_timer(unsigned long data);
void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
struct irb *irb);
int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs,
int nr_output_qs);
void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr);
int qdio_setup_get_ssqd(struct qdio_irq *irq_ptr,
struct subchannel_id *schid,
struct qdio_ssqd_desc *data);
int qdio_setup_irq(struct qdio_initialize *init_data);
void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
struct ccw_device *cdev);
void qdio_release_memory(struct qdio_irq *irq_ptr);
int qdio_setup_create_sysfs(struct ccw_device *cdev);
void qdio_setup_destroy_sysfs(struct ccw_device *cdev);
int qdio_setup_init(void);
void qdio_setup_exit(void);
int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
unsigned char *state);
#endif /* _CIO_QDIO_H */