ad33707417
This patch enables DT support for the IIC driver used on SH-based SoCs such as sh7722 and sh7724 among others as well as SH-Mobile SoCs such as sh7367, sh7377, sh7372, sh73a0 and r8a7740. Tested with out-of-tree DT support code on the sh7372 Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
750 lines
20 KiB
C
750 lines
20 KiB
C
/*
|
|
* SuperH Mobile I2C Controller
|
|
*
|
|
* Copyright (C) 2008 Magnus Damm
|
|
*
|
|
* Portions of the code based on out-of-tree driver i2c-sh7343.c
|
|
* Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of_i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c/i2c-sh_mobile.h>
|
|
|
|
/* Transmit operation: */
|
|
/* */
|
|
/* 0 byte transmit */
|
|
/* BUS: S A8 ACK P */
|
|
/* IRQ: DTE WAIT */
|
|
/* ICIC: */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 */
|
|
/* */
|
|
/* 1 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK P */
|
|
/* IRQ: DTE WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) */
|
|
/* */
|
|
/* 2 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
|
|
/* IRQ: DTE WAIT WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) D8(2) */
|
|
/* */
|
|
/* 3 bytes or more, +---------+ gets repeated */
|
|
/* */
|
|
/* */
|
|
/* Receive operation: */
|
|
/* */
|
|
/* 0 byte receive - not supported since slave may hold SDA low */
|
|
/* */
|
|
/* 1 byte receive [TX] | [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) */
|
|
/* */
|
|
/* 2 byte receive [TX]| [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) */
|
|
/* */
|
|
/* 3 byte receive [TX] | [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) D8(3) */
|
|
/* */
|
|
/* 4 bytes or more, this part is repeated +---------+ */
|
|
/* */
|
|
/* */
|
|
/* Interrupt order and BUSY flag */
|
|
/* ___ _ */
|
|
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
|
|
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
|
|
/* */
|
|
/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
|
|
/* ___ */
|
|
/* WAIT IRQ ________________________________/ \___________ */
|
|
/* TACK IRQ ____________________________________/ \_______ */
|
|
/* DTE IRQ __________________________________________/ \_ */
|
|
/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
|
|
/* _______________________________________________ */
|
|
/* BUSY __/ \_ */
|
|
/* */
|
|
|
|
enum sh_mobile_i2c_op {
|
|
OP_START = 0,
|
|
OP_TX_FIRST,
|
|
OP_TX,
|
|
OP_TX_STOP,
|
|
OP_TX_TO_RX,
|
|
OP_RX,
|
|
OP_RX_STOP,
|
|
OP_RX_STOP_DATA,
|
|
};
|
|
|
|
struct sh_mobile_i2c_data {
|
|
struct device *dev;
|
|
void __iomem *reg;
|
|
struct i2c_adapter adap;
|
|
unsigned long bus_speed;
|
|
struct clk *clk;
|
|
u_int8_t icic;
|
|
u_int8_t iccl;
|
|
u_int8_t icch;
|
|
u_int8_t flags;
|
|
|
|
spinlock_t lock;
|
|
wait_queue_head_t wait;
|
|
struct i2c_msg *msg;
|
|
int pos;
|
|
int sr;
|
|
};
|
|
|
|
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
|
|
|
|
#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
|
|
|
|
/* Register offsets */
|
|
#define ICDR 0x00
|
|
#define ICCR 0x04
|
|
#define ICSR 0x08
|
|
#define ICIC 0x0c
|
|
#define ICCL 0x10
|
|
#define ICCH 0x14
|
|
|
|
/* Register bits */
|
|
#define ICCR_ICE 0x80
|
|
#define ICCR_RACK 0x40
|
|
#define ICCR_TRS 0x10
|
|
#define ICCR_BBSY 0x04
|
|
#define ICCR_SCP 0x01
|
|
|
|
#define ICSR_SCLM 0x80
|
|
#define ICSR_SDAM 0x40
|
|
#define SW_DONE 0x20
|
|
#define ICSR_BUSY 0x10
|
|
#define ICSR_AL 0x08
|
|
#define ICSR_TACK 0x04
|
|
#define ICSR_WAIT 0x02
|
|
#define ICSR_DTE 0x01
|
|
|
|
#define ICIC_ICCLB8 0x80
|
|
#define ICIC_ICCHB8 0x40
|
|
#define ICIC_ALE 0x08
|
|
#define ICIC_TACKE 0x04
|
|
#define ICIC_WAITE 0x02
|
|
#define ICIC_DTEE 0x01
|
|
|
|
static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
|
|
{
|
|
if (offs == ICIC)
|
|
data |= pd->icic;
|
|
|
|
iowrite8(data, pd->reg + offs);
|
|
}
|
|
|
|
static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
|
|
{
|
|
return ioread8(pd->reg + offs);
|
|
}
|
|
|
|
static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
|
|
unsigned char set, unsigned char clr)
|
|
{
|
|
iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
|
|
}
|
|
|
|
static void activate_ch(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned long i2c_clk;
|
|
u_int32_t num;
|
|
u_int32_t denom;
|
|
u_int32_t tmp;
|
|
|
|
/* Wake up device and enable clock */
|
|
pm_runtime_get_sync(pd->dev);
|
|
clk_enable(pd->clk);
|
|
|
|
/* Get clock rate after clock is enabled */
|
|
i2c_clk = clk_get_rate(pd->clk);
|
|
|
|
/* Calculate the value for iccl. From the data sheet:
|
|
* iccl = (p clock / transfer rate) * (L / (L + H))
|
|
* where L and H are the SCL low/high ratio (5/4 in this case).
|
|
* We also round off the result.
|
|
*/
|
|
num = i2c_clk * 5;
|
|
denom = pd->bus_speed * 9;
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
pd->iccl = (u_int8_t)((num/denom) + 1);
|
|
else
|
|
pd->iccl = (u_int8_t)(num/denom);
|
|
|
|
/* one more bit of ICCL in ICIC */
|
|
if (pd->flags & IIC_FLAG_HAS_ICIC67) {
|
|
if ((num/denom) > 0xff)
|
|
pd->icic |= ICIC_ICCLB8;
|
|
else
|
|
pd->icic &= ~ICIC_ICCLB8;
|
|
}
|
|
|
|
/* Calculate the value for icch. From the data sheet:
|
|
icch = (p clock / transfer rate) * (H / (L + H)) */
|
|
num = i2c_clk * 4;
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
pd->icch = (u_int8_t)((num/denom) + 1);
|
|
else
|
|
pd->icch = (u_int8_t)(num/denom);
|
|
|
|
/* one more bit of ICCH in ICIC */
|
|
if (pd->flags & IIC_FLAG_HAS_ICIC67) {
|
|
if ((num/denom) > 0xff)
|
|
pd->icic |= ICIC_ICCHB8;
|
|
else
|
|
pd->icic &= ~ICIC_ICCHB8;
|
|
}
|
|
|
|
/* Enable channel and configure rx ack */
|
|
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
|
|
|
|
/* Mask all interrupts */
|
|
iic_wr(pd, ICIC, 0);
|
|
|
|
/* Set the clock */
|
|
iic_wr(pd, ICCL, pd->iccl);
|
|
iic_wr(pd, ICCH, pd->icch);
|
|
}
|
|
|
|
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
/* Clear/disable interrupts */
|
|
iic_wr(pd, ICSR, 0);
|
|
iic_wr(pd, ICIC, 0);
|
|
|
|
/* Disable channel */
|
|
iic_set_clr(pd, ICCR, 0, ICCR_ICE);
|
|
|
|
/* Disable clock and mark device as idle */
|
|
clk_disable(pd->clk);
|
|
pm_runtime_put_sync(pd->dev);
|
|
}
|
|
|
|
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
|
|
enum sh_mobile_i2c_op op, unsigned char data)
|
|
{
|
|
unsigned char ret = 0;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data);
|
|
|
|
spin_lock_irqsave(&pd->lock, flags);
|
|
|
|
switch (op) {
|
|
case OP_START: /* issue start and trigger DTE interrupt */
|
|
iic_wr(pd, ICCR, 0x94);
|
|
break;
|
|
case OP_TX_FIRST: /* disable DTE interrupt and write data */
|
|
iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
iic_wr(pd, ICDR, data);
|
|
break;
|
|
case OP_TX: /* write data */
|
|
iic_wr(pd, ICDR, data);
|
|
break;
|
|
case OP_TX_STOP: /* write data and issue a stop afterwards */
|
|
iic_wr(pd, ICDR, data);
|
|
iic_wr(pd, ICCR, 0x90);
|
|
break;
|
|
case OP_TX_TO_RX: /* select read mode */
|
|
iic_wr(pd, ICCR, 0x81);
|
|
break;
|
|
case OP_RX: /* just read data */
|
|
ret = iic_rd(pd, ICDR);
|
|
break;
|
|
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
|
|
iic_wr(pd, ICIC,
|
|
ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
iic_wr(pd, ICCR, 0xc0);
|
|
break;
|
|
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
|
|
iic_wr(pd, ICIC,
|
|
ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
ret = iic_rd(pd, ICDR);
|
|
iic_wr(pd, ICCR, 0xc0);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pd->lock, flags);
|
|
|
|
dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->pos == -1)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->pos == (pd->msg->len - 1))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
|
|
unsigned char *buf)
|
|
{
|
|
switch (pd->pos) {
|
|
case -1:
|
|
*buf = (pd->msg->addr & 0x7f) << 1;
|
|
*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
|
|
break;
|
|
default:
|
|
*buf = pd->msg->buf[pd->pos];
|
|
}
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned char data;
|
|
|
|
if (pd->pos == pd->msg->len)
|
|
return 1;
|
|
|
|
sh_mobile_i2c_get_data(pd, &data);
|
|
|
|
if (sh_mobile_i2c_is_last_byte(pd))
|
|
i2c_op(pd, OP_TX_STOP, data);
|
|
else if (sh_mobile_i2c_is_first_byte(pd))
|
|
i2c_op(pd, OP_TX_FIRST, data);
|
|
else
|
|
i2c_op(pd, OP_TX, data);
|
|
|
|
pd->pos++;
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned char data;
|
|
int real_pos;
|
|
|
|
do {
|
|
if (pd->pos <= -1) {
|
|
sh_mobile_i2c_get_data(pd, &data);
|
|
|
|
if (sh_mobile_i2c_is_first_byte(pd))
|
|
i2c_op(pd, OP_TX_FIRST, data);
|
|
else
|
|
i2c_op(pd, OP_TX, data);
|
|
break;
|
|
}
|
|
|
|
if (pd->pos == 0) {
|
|
i2c_op(pd, OP_TX_TO_RX, 0);
|
|
break;
|
|
}
|
|
|
|
real_pos = pd->pos - 2;
|
|
|
|
if (pd->pos == pd->msg->len) {
|
|
if (real_pos < 0) {
|
|
i2c_op(pd, OP_RX_STOP, 0);
|
|
break;
|
|
}
|
|
data = i2c_op(pd, OP_RX_STOP_DATA, 0);
|
|
} else
|
|
data = i2c_op(pd, OP_RX, 0);
|
|
|
|
if (real_pos >= 0)
|
|
pd->msg->buf[real_pos] = data;
|
|
} while (0);
|
|
|
|
pd->pos++;
|
|
return pd->pos == (pd->msg->len + 2);
|
|
}
|
|
|
|
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct platform_device *dev = dev_id;
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
unsigned char sr;
|
|
int wakeup;
|
|
|
|
sr = iic_rd(pd, ICSR);
|
|
pd->sr |= sr; /* remember state */
|
|
|
|
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
|
|
(pd->msg->flags & I2C_M_RD) ? "read" : "write",
|
|
pd->pos, pd->msg->len);
|
|
|
|
if (sr & (ICSR_AL | ICSR_TACK)) {
|
|
/* don't interrupt transaction - continue to issue stop */
|
|
iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
|
|
wakeup = 0;
|
|
} else if (pd->msg->flags & I2C_M_RD)
|
|
wakeup = sh_mobile_i2c_isr_rx(pd);
|
|
else
|
|
wakeup = sh_mobile_i2c_isr_tx(pd);
|
|
|
|
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
|
|
iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
|
|
|
|
if (wakeup) {
|
|
pd->sr |= SW_DONE;
|
|
wake_up(&pd->wait);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
|
|
{
|
|
if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
|
|
dev_err(pd->dev, "Unsupported zero length i2c read\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Initialize channel registers */
|
|
iic_set_clr(pd, ICCR, 0, ICCR_ICE);
|
|
|
|
/* Enable channel and configure rx ack */
|
|
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
|
|
|
|
/* Set the clock */
|
|
iic_wr(pd, ICCL, pd->iccl);
|
|
iic_wr(pd, ICCH, pd->icch);
|
|
|
|
pd->msg = usr_msg;
|
|
pd->pos = -1;
|
|
pd->sr = 0;
|
|
|
|
/* Enable all interrupts to begin with */
|
|
iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
|
|
struct i2c_msg *msg;
|
|
int err = 0;
|
|
u_int8_t val;
|
|
int i, k, retry_count;
|
|
|
|
activate_ch(pd);
|
|
|
|
/* Process all messages */
|
|
for (i = 0; i < num; i++) {
|
|
msg = &msgs[i];
|
|
|
|
err = start_ch(pd, msg);
|
|
if (err)
|
|
break;
|
|
|
|
i2c_op(pd, OP_START, 0);
|
|
|
|
/* The interrupt handler takes care of the rest... */
|
|
k = wait_event_timeout(pd->wait,
|
|
pd->sr & (ICSR_TACK | SW_DONE),
|
|
5 * HZ);
|
|
if (!k)
|
|
dev_err(pd->dev, "Transfer request timed out\n");
|
|
|
|
retry_count = 1000;
|
|
again:
|
|
val = iic_rd(pd, ICSR);
|
|
|
|
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
|
|
|
|
/* the interrupt handler may wake us up before the
|
|
* transfer is finished, so poll the hardware
|
|
* until we're done.
|
|
*/
|
|
if (val & ICSR_BUSY) {
|
|
udelay(10);
|
|
if (retry_count--)
|
|
goto again;
|
|
|
|
err = -EIO;
|
|
dev_err(pd->dev, "Polling timed out\n");
|
|
break;
|
|
}
|
|
|
|
/* handle missing acknowledge and arbitration lost */
|
|
if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
|
|
err = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
deactivate_ch(pd);
|
|
|
|
if (!err)
|
|
err = num;
|
|
return err;
|
|
}
|
|
|
|
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static struct i2c_algorithm sh_mobile_i2c_algorithm = {
|
|
.functionality = sh_mobile_i2c_func,
|
|
.master_xfer = sh_mobile_i2c_xfer,
|
|
};
|
|
|
|
static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
|
|
{
|
|
struct resource *res;
|
|
int ret = -ENXIO;
|
|
int n, k = 0;
|
|
|
|
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
|
|
for (n = res->start; hook && n <= res->end; n++) {
|
|
if (request_irq(n, sh_mobile_i2c_isr, 0,
|
|
dev_name(&dev->dev), dev)) {
|
|
for (n--; n >= res->start; n--)
|
|
free_irq(n, dev);
|
|
|
|
goto rollback;
|
|
}
|
|
}
|
|
k++;
|
|
}
|
|
|
|
if (hook)
|
|
return k > 0 ? 0 : -ENOENT;
|
|
|
|
ret = 0;
|
|
|
|
rollback:
|
|
k--;
|
|
|
|
while (k >= 0) {
|
|
res = platform_get_resource(dev, IORESOURCE_IRQ, k);
|
|
for (n = res->start; n <= res->end; n++)
|
|
free_irq(n, dev);
|
|
|
|
k--;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_probe(struct platform_device *dev)
|
|
{
|
|
struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data;
|
|
struct sh_mobile_i2c_data *pd;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
int size;
|
|
int ret;
|
|
|
|
pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
|
|
if (pd == NULL) {
|
|
dev_err(&dev->dev, "cannot allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pd->clk = clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(pd->clk)) {
|
|
dev_err(&dev->dev, "cannot get clock\n");
|
|
ret = PTR_ERR(pd->clk);
|
|
goto err;
|
|
}
|
|
|
|
ret = sh_mobile_i2c_hook_irqs(dev, 1);
|
|
if (ret) {
|
|
dev_err(&dev->dev, "cannot request IRQ\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
pd->dev = &dev->dev;
|
|
platform_set_drvdata(dev, pd);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&dev->dev, "cannot find IO resource\n");
|
|
ret = -ENOENT;
|
|
goto err_irq;
|
|
}
|
|
|
|
size = resource_size(res);
|
|
|
|
pd->reg = ioremap(res->start, size);
|
|
if (pd->reg == NULL) {
|
|
dev_err(&dev->dev, "cannot map IO\n");
|
|
ret = -ENXIO;
|
|
goto err_irq;
|
|
}
|
|
|
|
/* Use platformd data bus speed or NORMAL_SPEED */
|
|
pd->bus_speed = NORMAL_SPEED;
|
|
if (pdata && pdata->bus_speed)
|
|
pd->bus_speed = pdata->bus_speed;
|
|
|
|
/* The IIC blocks on SH-Mobile ARM processors
|
|
* come with two new bits in ICIC.
|
|
*/
|
|
if (size > 0x17)
|
|
pd->flags |= IIC_FLAG_HAS_ICIC67;
|
|
|
|
/* Enable Runtime PM for this device.
|
|
*
|
|
* Also tell the Runtime PM core to ignore children
|
|
* for this device since it is valid for us to suspend
|
|
* this I2C master driver even though the slave devices
|
|
* on the I2C bus may not be suspended.
|
|
*
|
|
* The state of the I2C hardware bus is unaffected by
|
|
* the Runtime PM state.
|
|
*/
|
|
pm_suspend_ignore_children(&dev->dev, true);
|
|
pm_runtime_enable(&dev->dev);
|
|
|
|
/* setup the private data */
|
|
adap = &pd->adap;
|
|
i2c_set_adapdata(adap, pd);
|
|
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &sh_mobile_i2c_algorithm;
|
|
adap->dev.parent = &dev->dev;
|
|
adap->retries = 5;
|
|
adap->nr = dev->id;
|
|
adap->dev.of_node = dev->dev.of_node;
|
|
|
|
strlcpy(adap->name, dev->name, sizeof(adap->name));
|
|
|
|
spin_lock_init(&pd->lock);
|
|
init_waitqueue_head(&pd->wait);
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0) {
|
|
dev_err(&dev->dev, "cannot add numbered adapter\n");
|
|
goto err_all;
|
|
}
|
|
|
|
dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
|
|
adap->nr, pd->bus_speed);
|
|
|
|
of_i2c_register_devices(adap);
|
|
return 0;
|
|
|
|
err_all:
|
|
iounmap(pd->reg);
|
|
err_irq:
|
|
sh_mobile_i2c_hook_irqs(dev, 0);
|
|
err_clk:
|
|
clk_put(pd->clk);
|
|
err:
|
|
kfree(pd);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&pd->adap);
|
|
iounmap(pd->reg);
|
|
sh_mobile_i2c_hook_irqs(dev, 0);
|
|
clk_put(pd->clk);
|
|
pm_runtime_disable(&dev->dev);
|
|
kfree(pd);
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_runtime_nop(struct device *dev)
|
|
{
|
|
/* Runtime PM callback shared between ->runtime_suspend()
|
|
* and ->runtime_resume(). Simply returns success.
|
|
*
|
|
* This driver re-initializes all registers after
|
|
* pm_runtime_get_sync() anyway so there is no need
|
|
* to save and restore registers here.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
|
|
.runtime_suspend = sh_mobile_i2c_runtime_nop,
|
|
.runtime_resume = sh_mobile_i2c_runtime_nop,
|
|
};
|
|
|
|
static const struct of_device_id sh_mobile_i2c_dt_ids[] __devinitconst = {
|
|
{ .compatible = "renesas,rmobile-iic", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
|
|
|
|
static struct platform_driver sh_mobile_i2c_driver = {
|
|
.driver = {
|
|
.name = "i2c-sh_mobile",
|
|
.owner = THIS_MODULE,
|
|
.pm = &sh_mobile_i2c_dev_pm_ops,
|
|
.of_match_table = sh_mobile_i2c_dt_ids,
|
|
},
|
|
.probe = sh_mobile_i2c_probe,
|
|
.remove = sh_mobile_i2c_remove,
|
|
};
|
|
|
|
static int __init sh_mobile_i2c_adap_init(void)
|
|
{
|
|
return platform_driver_register(&sh_mobile_i2c_driver);
|
|
}
|
|
|
|
static void __exit sh_mobile_i2c_adap_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_mobile_i2c_driver);
|
|
}
|
|
|
|
subsys_initcall(sh_mobile_i2c_adap_init);
|
|
module_exit(sh_mobile_i2c_adap_exit);
|
|
|
|
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:i2c-sh_mobile");
|