fd015480c2
The EP93xx C and D GPIO ports are multiplexed with the Keypad Interface peripheral. At power-up they default into non-GPIO mode with the Key Matrix controller enabled so these ports are unusable for GPIO. Note that the Keypad Interface peripheral is only available in the EP9307, EP9312, and EP9315 processor variants. The keypad support will clear the DeviceConfig bits appropriately to enable the Keypad Interface when the driver is loaded. And, when the driver is unloaded it will set the bits to return the ports to GPIO mode. To make these ports available for GPIO after power-up on all EP93xx processor variants, set the KEYS and GONK bits in the DeviceConfig register. Similarly, the E, G, and H ports are multiplexed with the IDE Interface peripheral. At power-up these also default into non-GPIO mode. Note that the IDE peripheral is only available in the EP9312 and EP9315 processor variants. Since an IDE driver is not even available in mainline, set the EONIDE, GONIDE, and HONIDE bits in the DeviceConfig register so that these ports will be available for GPIO use after power-up. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
439 lines
12 KiB
C
439 lines
12 KiB
C
/*
|
|
* linux/arch/arm/mach-ep93xx/gpio.c
|
|
*
|
|
* Generic EP93xx GPIO handling
|
|
*
|
|
* Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
|
|
*
|
|
* Based on code originally from:
|
|
* linux/arch/arm/mach-ep93xx/core.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
/*************************************************************************
|
|
* Interrupt handling for EP93xx on-chip GPIOs
|
|
*************************************************************************/
|
|
static unsigned char gpio_int_unmasked[3];
|
|
static unsigned char gpio_int_enabled[3];
|
|
static unsigned char gpio_int_type1[3];
|
|
static unsigned char gpio_int_type2[3];
|
|
static unsigned char gpio_int_debounce[3];
|
|
|
|
/* Port ordering is: A B F */
|
|
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
|
|
static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
|
|
static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
|
|
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
|
|
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
|
|
|
|
static void ep93xx_gpio_update_int_params(unsigned port)
|
|
{
|
|
BUG_ON(port > 2);
|
|
|
|
__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
|
|
|
|
__raw_writeb(gpio_int_type2[port],
|
|
EP93XX_GPIO_REG(int_type2_register_offset[port]));
|
|
|
|
__raw_writeb(gpio_int_type1[port],
|
|
EP93XX_GPIO_REG(int_type1_register_offset[port]));
|
|
|
|
__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
|
|
EP93XX_GPIO_REG(int_en_register_offset[port]));
|
|
}
|
|
|
|
static inline void ep93xx_gpio_int_mask(unsigned line)
|
|
{
|
|
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
|
|
}
|
|
|
|
void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
|
|
{
|
|
int line = irq_to_gpio(irq);
|
|
int port = line >> 3;
|
|
int port_mask = 1 << (line & 7);
|
|
|
|
if (enable)
|
|
gpio_int_debounce[port] |= port_mask;
|
|
else
|
|
gpio_int_debounce[port] &= ~port_mask;
|
|
|
|
__raw_writeb(gpio_int_debounce[port],
|
|
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
|
|
}
|
|
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
|
|
|
|
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned char status;
|
|
int i;
|
|
|
|
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
|
|
for (i = 0; i < 8; i++) {
|
|
if (status & (1 << i)) {
|
|
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
|
|
generic_handle_irq(gpio_irq);
|
|
}
|
|
}
|
|
|
|
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
|
|
for (i = 0; i < 8; i++) {
|
|
if (status & (1 << i)) {
|
|
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
|
|
generic_handle_irq(gpio_irq);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
/*
|
|
* map discontiguous hw irq range to continous sw irq range:
|
|
*
|
|
* IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
|
|
*/
|
|
int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
|
|
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
|
|
|
|
generic_handle_irq(gpio_irq);
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
int line = irq_to_gpio(d->irq);
|
|
int port = line >> 3;
|
|
int port_mask = 1 << (line & 7);
|
|
|
|
if ((irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
|
|
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
|
|
ep93xx_gpio_update_int_params(port);
|
|
}
|
|
|
|
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
|
|
{
|
|
int line = irq_to_gpio(d->irq);
|
|
int port = line >> 3;
|
|
int port_mask = 1 << (line & 7);
|
|
|
|
if ((irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
|
|
gpio_int_type2[port] ^= port_mask; /* switch edge direction */
|
|
|
|
gpio_int_unmasked[port] &= ~port_mask;
|
|
ep93xx_gpio_update_int_params(port);
|
|
|
|
__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
int line = irq_to_gpio(d->irq);
|
|
int port = line >> 3;
|
|
|
|
gpio_int_unmasked[port] &= ~(1 << (line & 7));
|
|
ep93xx_gpio_update_int_params(port);
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
int line = irq_to_gpio(d->irq);
|
|
int port = line >> 3;
|
|
|
|
gpio_int_unmasked[port] |= 1 << (line & 7);
|
|
ep93xx_gpio_update_int_params(port);
|
|
}
|
|
|
|
/*
|
|
* gpio_int_type1 controls whether the interrupt is level (0) or
|
|
* edge (1) triggered, while gpio_int_type2 controls whether it
|
|
* triggers on low/falling (0) or high/rising (1).
|
|
*/
|
|
static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct irq_desc *desc = irq_desc + d->irq;
|
|
const int gpio = irq_to_gpio(d->irq);
|
|
const int port = gpio >> 3;
|
|
const int port_mask = 1 << (gpio & 7);
|
|
|
|
gpio_direction_input(gpio);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
gpio_int_type1[port] |= port_mask;
|
|
gpio_int_type2[port] |= port_mask;
|
|
desc->handle_irq = handle_edge_irq;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
gpio_int_type1[port] |= port_mask;
|
|
gpio_int_type2[port] &= ~port_mask;
|
|
desc->handle_irq = handle_edge_irq;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
gpio_int_type1[port] &= ~port_mask;
|
|
gpio_int_type2[port] |= port_mask;
|
|
desc->handle_irq = handle_level_irq;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
gpio_int_type1[port] &= ~port_mask;
|
|
gpio_int_type2[port] &= ~port_mask;
|
|
desc->handle_irq = handle_level_irq;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
gpio_int_type1[port] |= port_mask;
|
|
/* set initial polarity based on current input level */
|
|
if (gpio_get_value(gpio))
|
|
gpio_int_type2[port] &= ~port_mask; /* falling */
|
|
else
|
|
gpio_int_type2[port] |= port_mask; /* rising */
|
|
desc->handle_irq = handle_edge_irq;
|
|
break;
|
|
default:
|
|
pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_int_enabled[port] |= port_mask;
|
|
|
|
desc->status &= ~IRQ_TYPE_SENSE_MASK;
|
|
desc->status |= type & IRQ_TYPE_SENSE_MASK;
|
|
|
|
ep93xx_gpio_update_int_params(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip ep93xx_gpio_irq_chip = {
|
|
.name = "GPIO",
|
|
.irq_ack = ep93xx_gpio_irq_ack,
|
|
.irq_mask_ack = ep93xx_gpio_irq_mask_ack,
|
|
.irq_mask = ep93xx_gpio_irq_mask,
|
|
.irq_unmask = ep93xx_gpio_irq_unmask,
|
|
.irq_set_type = ep93xx_gpio_irq_type,
|
|
};
|
|
|
|
void __init ep93xx_gpio_init_irq(void)
|
|
{
|
|
int gpio_irq;
|
|
|
|
for (gpio_irq = gpio_to_irq(0);
|
|
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
|
|
set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
|
|
set_irq_handler(gpio_irq, handle_level_irq);
|
|
set_irq_flags(gpio_irq, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* gpiolib interface for EP93xx on-chip GPIOs
|
|
*************************************************************************/
|
|
struct ep93xx_gpio_chip {
|
|
struct gpio_chip chip;
|
|
|
|
void __iomem *data_reg;
|
|
void __iomem *data_dir_reg;
|
|
};
|
|
|
|
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
|
|
|
|
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
|
|
unsigned long flags;
|
|
u8 v;
|
|
|
|
local_irq_save(flags);
|
|
v = __raw_readb(ep93xx_chip->data_dir_reg);
|
|
v &= ~(1 << offset);
|
|
__raw_writeb(v, ep93xx_chip->data_dir_reg);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int val)
|
|
{
|
|
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
|
|
unsigned long flags;
|
|
int line;
|
|
u8 v;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Set the value */
|
|
v = __raw_readb(ep93xx_chip->data_reg);
|
|
if (val)
|
|
v |= (1 << offset);
|
|
else
|
|
v &= ~(1 << offset);
|
|
__raw_writeb(v, ep93xx_chip->data_reg);
|
|
|
|
/* Drive as an output */
|
|
line = chip->base + offset;
|
|
if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
|
|
/* Ports A/B/F */
|
|
ep93xx_gpio_int_mask(line);
|
|
ep93xx_gpio_update_int_params(line >> 3);
|
|
}
|
|
|
|
v = __raw_readb(ep93xx_chip->data_dir_reg);
|
|
v |= (1 << offset);
|
|
__raw_writeb(v, ep93xx_chip->data_dir_reg);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
|
|
|
|
return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
|
|
}
|
|
|
|
static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
|
|
unsigned long flags;
|
|
u8 v;
|
|
|
|
local_irq_save(flags);
|
|
v = __raw_readb(ep93xx_chip->data_reg);
|
|
if (val)
|
|
v |= (1 << offset);
|
|
else
|
|
v &= ~(1 << offset);
|
|
__raw_writeb(v, ep93xx_chip->data_reg);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
|
|
u8 data_reg, data_dir_reg;
|
|
int gpio, i;
|
|
|
|
data_reg = __raw_readb(ep93xx_chip->data_reg);
|
|
data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
|
|
|
|
gpio = ep93xx_chip->chip.base;
|
|
for (i = 0; i < chip->ngpio; i++, gpio++) {
|
|
int is_out = data_dir_reg & (1 << i);
|
|
|
|
seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
|
|
chip->label, i, gpio,
|
|
gpiochip_is_requested(chip, i) ? : "",
|
|
is_out ? "out" : "in ",
|
|
(data_reg & (1 << i)) ? "hi" : "lo");
|
|
|
|
if (!is_out) {
|
|
int irq = gpio_to_irq(gpio);
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
if (irq >= 0 && desc->action) {
|
|
char *trigger;
|
|
|
|
switch (desc->status & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_NONE:
|
|
trigger = "(default)";
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
trigger = "edge-falling";
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
trigger = "edge-rising";
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
trigger = "edge-both";
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
trigger = "level-high";
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
trigger = "level-low";
|
|
break;
|
|
default:
|
|
trigger = "?trigger?";
|
|
break;
|
|
}
|
|
|
|
seq_printf(s, " irq-%d %s%s",
|
|
irq, trigger,
|
|
(desc->status & IRQ_WAKEUP)
|
|
? " wakeup" : "");
|
|
}
|
|
}
|
|
|
|
seq_printf(s, "\n");
|
|
}
|
|
}
|
|
|
|
#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \
|
|
{ \
|
|
.chip = { \
|
|
.label = name, \
|
|
.direction_input = ep93xx_gpio_direction_input, \
|
|
.direction_output = ep93xx_gpio_direction_output, \
|
|
.get = ep93xx_gpio_get, \
|
|
.set = ep93xx_gpio_set, \
|
|
.dbg_show = ep93xx_gpio_dbg_show, \
|
|
.base = base_gpio, \
|
|
.ngpio = 8, \
|
|
}, \
|
|
.data_reg = EP93XX_GPIO_REG(dr), \
|
|
.data_dir_reg = EP93XX_GPIO_REG(ddr), \
|
|
}
|
|
|
|
static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
|
|
EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
|
|
EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
|
|
EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
|
|
EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
|
|
EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
|
|
EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
|
|
EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
|
|
EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
|
|
};
|
|
|
|
void __init ep93xx_gpio_init(void)
|
|
{
|
|
int i;
|
|
|
|
/* Set Ports C, D, E, G, and H for GPIO use */
|
|
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
|
|
EP93XX_SYSCON_DEVCFG_GONK |
|
|
EP93XX_SYSCON_DEVCFG_EONIDE |
|
|
EP93XX_SYSCON_DEVCFG_GONIDE |
|
|
EP93XX_SYSCON_DEVCFG_HONIDE);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
|
|
gpiochip_add(&ep93xx_gpio_banks[i].chip);
|
|
}
|