2e19458312
This patch reworks the cell iic interrupt handling so that: - Node ID is back in the interrupt number (only one IRQ host is created for all nodes). This allows interrupts from sources on another node to be routed non-locally. This will allow possibly one day to fix maxcpus=1 or 2 and still get interrupts from devices on BE 1. (A bit more fixing is needed for that) and it will allow us to implement actual affinity control of external interrupts. - Added handling of the IO exceptions interrupts (badly named, but I re-used the name initially used by STI). Those are the interrupts exposed by IIC_ISR and IIC_IRR, such as the IOC translation exception, performance monitor, etc... Those get their special numbers in the IRQ number space and are internally implemented as a cascade on unit 0xe, class 1 of each node. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
87 lines
2.8 KiB
C
87 lines
2.8 KiB
C
#ifndef ASM_CELL_PIC_H
|
|
#define ASM_CELL_PIC_H
|
|
#ifdef __KERNEL__
|
|
/*
|
|
* Mapping of IIC pending bits into per-node interrupt numbers.
|
|
*
|
|
* Interrupt numbers are in the range 0...0x1ff where the top bit
|
|
* (0x100) represent the source node. Only 2 nodes are supported with
|
|
* the current code though it's trivial to extend that if necessary using
|
|
* higher level bits
|
|
*
|
|
* The bottom 8 bits are split into 2 type bits and 6 data bits that
|
|
* depend on the type:
|
|
*
|
|
* 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
|
|
* 01 (0x40 | data) : IO exception. data is the exception number as
|
|
* defined by bit numbers in IIC_SR
|
|
* 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
|
|
* and node is always 0 (IPIs are per-cpu, their source is
|
|
* not relevant)
|
|
* 11 (0xc0 | data) : reserved
|
|
*
|
|
* In addition, interrupt number 0x80000000 is defined as always invalid
|
|
* (that is the node field is expected to never extend to move than 23 bits)
|
|
*
|
|
*/
|
|
|
|
enum {
|
|
IIC_IRQ_INVALID = 0x80000000u,
|
|
IIC_IRQ_NODE_MASK = 0x100,
|
|
IIC_IRQ_NODE_SHIFT = 8,
|
|
IIC_IRQ_MAX = 0x1ff,
|
|
IIC_IRQ_TYPE_MASK = 0xc0,
|
|
IIC_IRQ_TYPE_NORMAL = 0x00,
|
|
IIC_IRQ_TYPE_IOEXC = 0x40,
|
|
IIC_IRQ_TYPE_IPI = 0x80,
|
|
IIC_IRQ_CLASS_SHIFT = 4,
|
|
IIC_IRQ_CLASS_0 = 0x00,
|
|
IIC_IRQ_CLASS_1 = 0x10,
|
|
IIC_IRQ_CLASS_2 = 0x20,
|
|
IIC_SOURCE_COUNT = 0x200,
|
|
|
|
/* Here are defined the various source/dest units. Avoid using those
|
|
* definitions if you can, they are mostly here for reference
|
|
*/
|
|
IIC_UNIT_SPU_0 = 0x4,
|
|
IIC_UNIT_SPU_1 = 0x7,
|
|
IIC_UNIT_SPU_2 = 0x3,
|
|
IIC_UNIT_SPU_3 = 0x8,
|
|
IIC_UNIT_SPU_4 = 0x2,
|
|
IIC_UNIT_SPU_5 = 0x9,
|
|
IIC_UNIT_SPU_6 = 0x1,
|
|
IIC_UNIT_SPU_7 = 0xa,
|
|
IIC_UNIT_IOC_0 = 0x0,
|
|
IIC_UNIT_IOC_1 = 0xb,
|
|
IIC_UNIT_THREAD_0 = 0xe, /* target only */
|
|
IIC_UNIT_THREAD_1 = 0xf, /* target only */
|
|
IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */
|
|
|
|
/* Base numbers for the external interrupts */
|
|
IIC_IRQ_EXT_IOIF0 =
|
|
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
|
|
IIC_IRQ_EXT_IOIF1 =
|
|
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
|
|
|
|
/* Base numbers for the IIC_ISR interrupts */
|
|
IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
|
|
IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
|
|
IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
|
|
IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
|
|
IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
|
|
|
|
/* Which bits in IIC_ISR are edge sensitive */
|
|
IIC_ISR_EDGE_MASK = 0x4ul,
|
|
};
|
|
|
|
extern void iic_init_IRQ(void);
|
|
extern void iic_cause_IPI(int cpu, int mesg);
|
|
extern void iic_request_IPIs(void);
|
|
extern void iic_setup_cpu(void);
|
|
|
|
extern u8 iic_get_target_id(int cpu);
|
|
|
|
extern void spider_init_IRQ(void);
|
|
|
|
#endif
|
|
#endif /* ASM_CELL_PIC_H */
|