b920de1b77
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
151 lines
7.8 KiB
C
151 lines
7.8 KiB
C
/* AM33v2 on-board bus controller registers
|
|
*
|
|
* Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
|
|
* Written by David Howells (dhowells@redhat.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public Licence
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the Licence, or (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef _ASM_BUSCTL_REGS_H
|
|
#define _ASM_BUSCTL_REGS_H
|
|
|
|
#include <asm/cpu-regs.h>
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
/* bus controller registers */
|
|
#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */
|
|
#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */
|
|
#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */
|
|
#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */
|
|
#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */
|
|
#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */
|
|
#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */
|
|
#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */
|
|
#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */
|
|
#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */
|
|
#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */
|
|
#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */
|
|
#define BCCR_API 0x00070000 /* bus arbitration priority */
|
|
#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */
|
|
#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */
|
|
#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */
|
|
#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */
|
|
#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */
|
|
#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */
|
|
#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */
|
|
#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */
|
|
#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */
|
|
#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */
|
|
#define BCCR_TMON 0x03000000 /* timeout value settings */
|
|
#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */
|
|
#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */
|
|
#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */
|
|
#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */
|
|
#define BCCR_TMOE 0x10000000 /* timeout detection enable */
|
|
|
|
#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */
|
|
#define BCBERR_BESB 0x0000001f /* erroneous access destination space */
|
|
#define BCBERR_BESB_MON 0x00000001 /* - monitor space */
|
|
#define BCBERR_BESB_IO 0x00000002 /* - IO bus */
|
|
#define BCBERR_BESB_EX 0x00000004 /* - EX bus */
|
|
#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */
|
|
#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */
|
|
#define BCBERR_BERW 0x00000100 /* type of access */
|
|
#define BCBERR_BERW_WRITE 0x00000000 /* - write */
|
|
#define BCBERR_BERW_READ 0x00000100 /* - read */
|
|
#define BCBERR_BESD 0x00000200 /* error detector */
|
|
#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */
|
|
#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */
|
|
#define BCBERR_BEBST 0x00000400 /* type of access */
|
|
#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */
|
|
#define BCBERR_BEBST_BURST 0x00000400 /* - burst */
|
|
#define BCBERR_BEME 0x00000800 /* multiple bus error flag */
|
|
#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */
|
|
#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */
|
|
#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */
|
|
#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */
|
|
#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */
|
|
|
|
#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */
|
|
|
|
/* system bus controller registers */
|
|
#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */
|
|
#define SBBASE_BE 0x00000001 /* bank enable */
|
|
#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */
|
|
#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */
|
|
|
|
#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */
|
|
#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */
|
|
#define SBCNTRL0_REH 0x0000f000 /* read enable hold */
|
|
#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */
|
|
#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */
|
|
#define SBCNTRL0_DAH 0x0f000000 /* data hold */
|
|
#define SBCNTRL0_ADH 0xf0000000 /* address hold */
|
|
|
|
#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */
|
|
#define SBCNTRL1_WED 0x00000f00 /* write enable delay */
|
|
#define SBCNTRL1_RED 0x0000f000 /* read enable delay */
|
|
#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */
|
|
#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */
|
|
#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */
|
|
#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */
|
|
|
|
#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */
|
|
#define SBCNTRL2_WC 0x000000ff /* wait count */
|
|
#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */
|
|
#define SBCNTRL2_WM 0x01000000 /* wait mode setting */
|
|
#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */
|
|
#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */
|
|
#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */
|
|
#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */
|
|
#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */
|
|
#define SBCNTRL2_BW 0x04000000 /* bus width */
|
|
#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */
|
|
#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */
|
|
#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */
|
|
#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */
|
|
#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */
|
|
#define SBCNTRL2_BT 0x70000000 /* bus type setting */
|
|
#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */
|
|
#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */
|
|
#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */
|
|
#define SBCNTRL2_BTSE 0x80000000 /* burst enable */
|
|
|
|
/* memory bus controller */
|
|
#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */
|
|
#define SDBASE_CE 0x00000001 /* chip enable */
|
|
#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */
|
|
#define SDBASE_CBAM_SHIFT 16
|
|
#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */
|
|
|
|
#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */
|
|
#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */
|
|
#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */
|
|
#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */
|
|
#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */
|
|
#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */
|
|
#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */
|
|
#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */
|
|
#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */
|
|
#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */
|
|
#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */
|
|
#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */
|
|
#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */
|
|
#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */
|
|
#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */
|
|
#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */
|
|
#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */
|
|
#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */
|
|
|
|
#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */
|
|
#define SDREFCNT_PERI 0x00000fff /* refresh period */
|
|
|
|
#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* _ASM_BUSCTL_REGS_H */
|