kernel-fxtec-pro1x/include/asm-sparc/floppy.h
Thomas Gleixner 6741320247 [PATCH] irq-flags: SPARC: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00

368 lines
10 KiB
C

/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
*/
#ifndef __ASM_SPARC_FLOPPY_H
#define __ASM_SPARC_FLOPPY_H
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/idprom.h>
#include <asm/machines.h>
#include <asm/oplib.h>
#include <asm/auxio.h>
#include <asm/irq.h>
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
#undef request_region
#define release_region(X, Y) do { } while(0)
#define request_region(X, Y, Z) (1)
/* References:
* 1) Netbsd Sun floppy driver.
* 2) NCR 82077 controller manual
* 3) Intel 82077 controller manual
*/
struct sun_flpy_controller {
volatile unsigned char status_82072; /* Main Status reg. */
#define dcr_82072 status_82072 /* Digital Control reg. */
#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */
volatile unsigned char data_82072; /* Data fifo. */
#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */
volatile unsigned char dor_82077; /* Digital Output reg. */
volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
volatile unsigned char status_82077; /* Main Status Register. */
#define drs_82077 status_82077 /* Digital Rate Select reg. */
volatile unsigned char data_82077; /* Data fifo. */
volatile unsigned char ___unused;
volatile unsigned char dir_82077; /* Digital Input reg. */
#define dcr_82077 dir_82077 /* Config Control reg. */
};
/* You'll only ever find one controller on a SparcStation anyways. */
static struct sun_flpy_controller *sun_fdc = NULL;
volatile unsigned char *fdc_status;
struct sun_floppy_ops {
unsigned char (*fd_inb)(int port);
void (*fd_outb)(unsigned char value, int port);
};
static struct sun_floppy_ops sun_fdops;
#define fd_inb(port) sun_fdops.fd_inb(port)
#define fd_outb(value,port) sun_fdops.fd_outb(value,port)
#define fd_enable_dma() sun_fd_enable_dma()
#define fd_disable_dma() sun_fd_disable_dma()
#define fd_request_dma() (0) /* nothing... */
#define fd_free_dma() /* nothing... */
#define fd_clear_dma_ff() /* nothing... */
#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode)
#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr)
#define fd_set_dma_count(count) sun_fd_set_dma_count(count)
#define fd_enable_irq() /* nothing... */
#define fd_disable_irq() /* nothing... */
#define fd_cacheflush(addr, size) /* nothing... */
#define fd_request_irq() sun_fd_request_irq()
#define fd_free_irq() /* nothing... */
#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size))
#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
#endif
#define FLOPPY_MOTOR_MASK 0x10
/* XXX This isn't really correct. XXX */
#define get_dma_residue(x) (0)
#define FLOPPY0_TYPE 4
#define FLOPPY1_TYPE 0
/* Super paranoid... */
#undef HAVE_DISABLE_HLT
/* Here is where we catch the floppy driver trying to initialize,
* therefore this is where we call the PROM device tree probing
* routine etc. on the Sparc.
*/
#define FDC1 sun_floppy_init()
#define N_FDC 1
#define N_DRIVE 8
/* No 64k boundary crossing problems on the Sparc. */
#define CROSS_64KB(a,s) (0)
/* Routines unique to each controller type on a Sun. */
static unsigned char sun_82072_fd_inb(int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to read unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 4: /* FD_STATUS */
return sun_fdc->status_82072 & ~STATUS_DMA;
case 5: /* FD_DATA */
return sun_fdc->data_82072;
case 7: /* FD_DIR */
return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0;
};
panic("sun_82072_fd_inb: How did I get here?");
}
static void sun_82072_fd_outb(unsigned char value, int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to write to unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 2: /* FD_DOR */
/* Oh geese, 82072 on the Sun has no DOR register,
* the functionality is implemented via the AUXIO
* I/O register. So we must emulate the behavior.
*
* ASSUMPTIONS: There will only ever be one floppy
* drive attached to a Sun controller
* and it will be at drive zero.
*/
{
unsigned bits = 0;
if (value & 0x10) bits |= AUXIO_FLPY_DSEL;
if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT;
set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
}
break;
case 5: /* FD_DATA */
sun_fdc->data_82072 = value;
break;
case 7: /* FD_DCR */
sun_fdc->dcr_82072 = value;
break;
case 4: /* FD_STATUS */
sun_fdc->status_82072 = value;
break;
};
return;
}
static unsigned char sun_82077_fd_inb(int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to read unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 4: /* FD_STATUS */
return sun_fdc->status_82077 & ~STATUS_DMA;
case 5: /* FD_DATA */
return sun_fdc->data_82077;
case 7: /* FD_DIR */
/* XXX: Is DCL on 0x80 in sun4m? */
return sun_fdc->dir_82077;
};
panic("sun_82072_fd_inb: How did I get here?");
}
static void sun_82077_fd_outb(unsigned char value, int port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to write to unknown port %d\n", port);
panic("floppy: Port bolixed.");
case 2: /* FD_DOR */
/* Happily, the 82077 has a real DOR register. */
sun_fdc->dor_82077 = value;
break;
case 5: /* FD_DATA */
sun_fdc->data_82077 = value;
break;
case 7: /* FD_DCR */
sun_fdc->dcr_82077 = value;
break;
case 4: /* FD_STATUS */
sun_fdc->status_82077 = value;
break;
};
return;
}
/* For pseudo-dma (Sun floppy drives have no real DMA available to
* them so we must eat the data fifo bytes directly ourselves) we have
* three state variables. doing_pdma tells our inline low-level
* assembly floppy interrupt entry point whether it should sit and eat
* bytes from the fifo or just transfer control up to the higher level
* floppy interrupt c-code. I tried very hard but I could not get the
* pseudo-dma to work in c-code without getting many overruns and
* underruns. If non-zero, doing_pdma encodes the direction of
* the transfer for debugging. 1=read 2=write
*/
char *pdma_vaddr;
unsigned long pdma_size;
volatile int doing_pdma = 0;
/* This is software state */
char *pdma_base = NULL;
unsigned long pdma_areasize;
/* Common routines to all controller types on the Sparc. */
static __inline__ void virtual_dma_init(void)
{
/* nothing... */
}
static __inline__ void sun_fd_disable_dma(void)
{
doing_pdma = 0;
if (pdma_base) {
mmu_unlockarea(pdma_base, pdma_areasize);
pdma_base = NULL;
}
}
static __inline__ void sun_fd_set_dma_mode(int mode)
{
switch(mode) {
case DMA_MODE_READ:
doing_pdma = 1;
break;
case DMA_MODE_WRITE:
doing_pdma = 2;
break;
default:
printk("Unknown dma mode %d\n", mode);
panic("floppy: Giving up...");
}
}
static __inline__ void sun_fd_set_dma_addr(char *buffer)
{
pdma_vaddr = buffer;
}
static __inline__ void sun_fd_set_dma_count(int length)
{
pdma_size = length;
}
static __inline__ void sun_fd_enable_dma(void)
{
pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
pdma_base = pdma_vaddr;
pdma_areasize = pdma_size;
}
/* Our low-level entry point in arch/sparc/kernel/entry.S */
irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
static int sun_fd_request_irq(void)
{
static int once = 0;
int error;
if(!once) {
once = 1;
error = request_fast_irq(FLOPPY_IRQ, floppy_hardint,
IRQF_DISABLED, "floppy");
return ((error == 0) ? 0 : -1);
} else return 0;
}
static struct linux_prom_registers fd_regs[2];
static int sun_floppy_init(void)
{
char state[128];
int tnode, fd_node, num_regs;
struct resource r;
use_virtual_dma = 1;
FLOPPY_IRQ = 11;
/* Forget it if we aren't on a machine that could possibly
* ever have a floppy drive.
*/
if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
(idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
/* We certainly don't have a floppy controller. */
goto no_sun_fdc;
}
/* Well, try to find one. */
tnode = prom_getchild(prom_root_node);
fd_node = prom_searchsiblings(tnode, "obio");
if(fd_node != 0) {
tnode = prom_getchild(fd_node);
fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
} else {
fd_node = prom_searchsiblings(tnode, "fd");
}
if(fd_node == 0) {
goto no_sun_fdc;
}
/* The sun4m lets us know if the controller is actually usable. */
if(sparc_cpu_model == sun4m &&
prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
if(!strcmp(state, "disabled")) {
goto no_sun_fdc;
}
}
num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
num_regs = (num_regs / sizeof(fd_regs[0]));
prom_apply_obio_ranges(fd_regs, num_regs);
memset(&r, 0, sizeof(r));
r.flags = fd_regs[0].which_io;
r.start = fd_regs[0].phys_addr;
sun_fdc = (struct sun_flpy_controller *)
sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
/* Last minute sanity check... */
if(sun_fdc->status_82072 == 0xff) {
sun_fdc = NULL;
goto no_sun_fdc;
}
if(sparc_cpu_model == sun4c) {
sun_fdops.fd_inb = sun_82072_fd_inb;
sun_fdops.fd_outb = sun_82072_fd_outb;
fdc_status = &sun_fdc->status_82072;
/* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */
} else {
sun_fdops.fd_inb = sun_82077_fd_inb;
sun_fdops.fd_outb = sun_82077_fd_outb;
fdc_status = &sun_fdc->status_82077;
/* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */
}
/* Success... */
allowed_drive_mask = 0x01;
return (int) sun_fdc;
no_sun_fdc:
return -1;
}
static int sparc_eject(void)
{
set_dor(0x00, 0xff, 0x90);
udelay(500);
set_dor(0x00, 0x6f, 0x00);
udelay(500);
return 0;
}
#define fd_eject(drive) sparc_eject()
#define EXTRA_FLOPPY_PARAMS
#endif /* !(__ASM_SPARC_FLOPPY_H) */