33f0f88f1c
The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
770 lines
23 KiB
C
770 lines
23 KiB
C
/*
|
|
* KOBIL USB Smart Card Terminal Driver
|
|
*
|
|
* Copyright (C) 2002 KOBIL Systems GmbH
|
|
* Author: Thomas Wahrenbruch
|
|
*
|
|
* Contact: linuxusb@kobil.de
|
|
*
|
|
* This program is largely derived from work by the linux-usb group
|
|
* and associated source files. Please see the usb/serial files for
|
|
* individual credits and copyrights.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
|
|
* patience.
|
|
*
|
|
* Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
|
|
* (Adapter K), B1 Professional and KAAN Professional (Adapter B)
|
|
*
|
|
* (21/05/2004) tw
|
|
* Fix bug with P'n'P readers
|
|
*
|
|
* (28/05/2003) tw
|
|
* Add support for KAAN SIM
|
|
*
|
|
* (12/09/2002) tw
|
|
* Adapted to 2.5.
|
|
*
|
|
* (11/08/2002) tw
|
|
* Initial version.
|
|
*/
|
|
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/ioctl.h>
|
|
#include "usb-serial.h"
|
|
#include "kobil_sct.h"
|
|
|
|
static int debug;
|
|
|
|
/* Version Information */
|
|
#define DRIVER_VERSION "21/05/2004"
|
|
#define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
|
|
#define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
|
|
|
|
#define KOBIL_VENDOR_ID 0x0D46
|
|
#define KOBIL_ADAPTER_B_PRODUCT_ID 0x2011
|
|
#define KOBIL_ADAPTER_K_PRODUCT_ID 0x2012
|
|
#define KOBIL_USBTWIN_PRODUCT_ID 0x0078
|
|
#define KOBIL_KAAN_SIM_PRODUCT_ID 0x0081
|
|
|
|
#define KOBIL_TIMEOUT 500
|
|
#define KOBIL_BUF_LENGTH 300
|
|
|
|
|
|
/* Function prototypes */
|
|
static int kobil_startup (struct usb_serial *serial);
|
|
static void kobil_shutdown (struct usb_serial *serial);
|
|
static int kobil_open (struct usb_serial_port *port, struct file *filp);
|
|
static void kobil_close (struct usb_serial_port *port, struct file *filp);
|
|
static int kobil_write (struct usb_serial_port *port,
|
|
const unsigned char *buf, int count);
|
|
static int kobil_write_room(struct usb_serial_port *port);
|
|
static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static int kobil_tiocmget(struct usb_serial_port *port, struct file *file);
|
|
static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static void kobil_read_int_callback( struct urb *urb, struct pt_regs *regs );
|
|
static void kobil_write_callback( struct urb *purb, struct pt_regs *regs );
|
|
|
|
|
|
static struct usb_device_id id_table [] = {
|
|
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
|
|
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) },
|
|
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) },
|
|
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_KAAN_SIM_PRODUCT_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
|
|
MODULE_DEVICE_TABLE (usb, id_table);
|
|
|
|
static struct usb_driver kobil_driver = {
|
|
.name = "kobil",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = id_table,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
|
|
static struct usb_serial_driver kobil_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "kobil",
|
|
},
|
|
.description = "KOBIL USB smart card terminal",
|
|
.id_table = id_table,
|
|
.num_interrupt_in = NUM_DONT_CARE,
|
|
.num_bulk_in = 0,
|
|
.num_bulk_out = 0,
|
|
.num_ports = 1,
|
|
.attach = kobil_startup,
|
|
.shutdown = kobil_shutdown,
|
|
.ioctl = kobil_ioctl,
|
|
.tiocmget = kobil_tiocmget,
|
|
.tiocmset = kobil_tiocmset,
|
|
.open = kobil_open,
|
|
.close = kobil_close,
|
|
.write = kobil_write,
|
|
.write_room = kobil_write_room,
|
|
.read_int_callback = kobil_read_int_callback,
|
|
};
|
|
|
|
|
|
struct kobil_private {
|
|
int write_int_endpoint_address;
|
|
int read_int_endpoint_address;
|
|
unsigned char buf[KOBIL_BUF_LENGTH]; // buffer for the APDU to send
|
|
int filled; // index of the last char in buf
|
|
int cur_pos; // index of the next char to send in buf
|
|
__u16 device_type;
|
|
int line_state;
|
|
struct termios internal_termios;
|
|
};
|
|
|
|
|
|
static int kobil_startup (struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
struct kobil_private *priv;
|
|
struct usb_device *pdev;
|
|
struct usb_host_config *actconfig;
|
|
struct usb_interface *interface;
|
|
struct usb_host_interface *altsetting;
|
|
struct usb_host_endpoint *endpoint;
|
|
|
|
priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL);
|
|
if (!priv){
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->filled = 0;
|
|
priv->cur_pos = 0;
|
|
priv->device_type = le16_to_cpu(serial->dev->descriptor.idProduct);
|
|
priv->line_state = 0;
|
|
|
|
switch (priv->device_type){
|
|
case KOBIL_ADAPTER_B_PRODUCT_ID:
|
|
printk(KERN_DEBUG "KOBIL B1 PRO / KAAN PRO detected\n");
|
|
break;
|
|
case KOBIL_ADAPTER_K_PRODUCT_ID:
|
|
printk(KERN_DEBUG "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n");
|
|
break;
|
|
case KOBIL_USBTWIN_PRODUCT_ID:
|
|
printk(KERN_DEBUG "KOBIL USBTWIN detected\n");
|
|
break;
|
|
case KOBIL_KAAN_SIM_PRODUCT_ID:
|
|
printk(KERN_DEBUG "KOBIL KAAN SIM detected\n");
|
|
break;
|
|
}
|
|
usb_set_serial_port_data(serial->port[0], priv);
|
|
|
|
// search for the necessary endpoints
|
|
pdev = serial->dev;
|
|
actconfig = pdev->actconfig;
|
|
interface = actconfig->interface[0];
|
|
altsetting = interface->cur_altsetting;
|
|
endpoint = altsetting->endpoint;
|
|
|
|
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
|
|
endpoint = &altsetting->endpoint[i];
|
|
if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
|
|
((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
|
|
dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
|
|
priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress;
|
|
}
|
|
if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
|
|
((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
|
|
dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
|
|
priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void kobil_shutdown (struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
|
|
|
|
for (i=0; i < serial->num_ports; ++i) {
|
|
while (serial->port[i]->open_count > 0) {
|
|
kobil_close (serial->port[i], NULL);
|
|
}
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
usb_set_serial_port_data(serial->port[i], NULL);
|
|
}
|
|
}
|
|
|
|
|
|
static int kobil_open (struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
int i, result = 0;
|
|
struct kobil_private *priv;
|
|
unsigned char *transfer_buffer;
|
|
int transfer_buffer_length = 8;
|
|
int write_urb_transfer_buffer_length = 8;
|
|
|
|
dbg("%s - port %d", __FUNCTION__, port->number);
|
|
priv = usb_get_serial_port_data(port);
|
|
priv->line_state = 0;
|
|
|
|
// someone sets the dev to 0 if the close method has been called
|
|
port->interrupt_in_urb->dev = port->serial->dev;
|
|
|
|
|
|
/* force low_latency on so that our tty_push actually forces
|
|
* the data through, otherwise it is scheduled, and with high
|
|
* data rates (like with OHCI) data can get lost.
|
|
*/
|
|
port->tty->low_latency = 1;
|
|
|
|
// without this, every push_tty_char is echoed :-(
|
|
port->tty->termios->c_lflag = 0;
|
|
port->tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
|
|
port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
|
|
port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
|
|
|
|
// set up internal termios structure
|
|
priv->internal_termios.c_iflag = port->tty->termios->c_iflag;
|
|
priv->internal_termios.c_oflag = port->tty->termios->c_oflag;
|
|
priv->internal_termios.c_cflag = port->tty->termios->c_cflag;
|
|
priv->internal_termios.c_lflag = port->tty->termios->c_lflag;
|
|
|
|
for (i=0; i<NCCS; i++) {
|
|
priv->internal_termios.c_cc[i] = port->tty->termios->c_cc[i];
|
|
}
|
|
|
|
// allocate memory for transfer buffer
|
|
transfer_buffer = (unsigned char *) kmalloc(transfer_buffer_length, GFP_KERNEL);
|
|
if (! transfer_buffer) {
|
|
return -ENOMEM;
|
|
} else {
|
|
memset(transfer_buffer, 0, transfer_buffer_length);
|
|
}
|
|
|
|
// allocate write_urb
|
|
if (!port->write_urb) {
|
|
dbg("%s - port %d Allocating port->write_urb", __FUNCTION__, port->number);
|
|
port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!port->write_urb) {
|
|
dbg("%s - port %d usb_alloc_urb failed", __FUNCTION__, port->number);
|
|
kfree(transfer_buffer);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
// allocate memory for write_urb transfer buffer
|
|
port->write_urb->transfer_buffer = (unsigned char *) kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
|
|
if (! port->write_urb->transfer_buffer) {
|
|
kfree(transfer_buffer);
|
|
usb_free_urb(port->write_urb);
|
|
port->write_urb = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
// get hardware version
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_GetMisc,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
|
|
SUSBCR_MSC_GetHWVersion,
|
|
0,
|
|
transfer_buffer,
|
|
transfer_buffer_length,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
dbg("%s - port %d Send get_HW_version URB returns: %i", __FUNCTION__, port->number, result);
|
|
dbg("Harware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
|
|
|
|
// get firmware version
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_GetMisc,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
|
|
SUSBCR_MSC_GetFWVersion,
|
|
0,
|
|
transfer_buffer,
|
|
transfer_buffer_length,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
dbg("%s - port %d Send get_FW_version URB returns: %i", __FUNCTION__, port->number, result);
|
|
dbg("Firmware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
|
|
|
|
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
|
|
// Setting Baudrate, Parity and Stopbits
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_SetBaudRateParityAndStopBits,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | SUSBCR_SPASB_1StopBit,
|
|
0,
|
|
transfer_buffer,
|
|
0,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
|
|
|
|
// reset all queues
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_Misc,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
SUSBCR_MSC_ResetAllQueues,
|
|
0,
|
|
transfer_buffer,
|
|
0,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
dbg("%s - port %d Send reset_all_queues URB returns: %i", __FUNCTION__, port->number, result);
|
|
}
|
|
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
|
|
priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
|
|
// start reading (Adapter B 'cause PNP string)
|
|
result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC );
|
|
dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
|
|
}
|
|
|
|
kfree(transfer_buffer);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void kobil_close (struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
dbg("%s - port %d", __FUNCTION__, port->number);
|
|
|
|
if (port->write_urb) {
|
|
usb_kill_urb(port->write_urb);
|
|
usb_free_urb( port->write_urb );
|
|
port->write_urb = NULL;
|
|
}
|
|
if (port->interrupt_in_urb)
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
}
|
|
|
|
|
|
static void kobil_read_int_callback( struct urb *purb, struct pt_regs *regs)
|
|
{
|
|
int result;
|
|
struct usb_serial_port *port = (struct usb_serial_port *) purb->context;
|
|
struct tty_struct *tty;
|
|
unsigned char *data = purb->transfer_buffer;
|
|
// char *dbg_data;
|
|
|
|
dbg("%s - port %d", __FUNCTION__, port->number);
|
|
|
|
if (purb->status) {
|
|
dbg("%s - port %d Read int status not zero: %d", __FUNCTION__, port->number, purb->status);
|
|
return;
|
|
}
|
|
|
|
tty = port->tty;
|
|
if (purb->actual_length) {
|
|
|
|
// BEGIN DEBUG
|
|
/*
|
|
dbg_data = (unsigned char *) kmalloc((3 * purb->actual_length + 10) * sizeof(char), GFP_KERNEL);
|
|
if (! dbg_data) {
|
|
return;
|
|
}
|
|
memset(dbg_data, 0, (3 * purb->actual_length + 10));
|
|
for (i = 0; i < purb->actual_length; i++) {
|
|
sprintf(dbg_data +3*i, "%02X ", data[i]);
|
|
}
|
|
dbg(" <-- %s", dbg_data );
|
|
kfree(dbg_data);
|
|
*/
|
|
// END DEBUG
|
|
|
|
tty_buffer_request_room(tty, purb->actual_length);
|
|
tty_insert_flip_string(tty, data, purb->actual_length);
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
// someone sets the dev to 0 if the close method has been called
|
|
port->interrupt_in_urb->dev = port->serial->dev;
|
|
|
|
result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC );
|
|
dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
|
|
}
|
|
|
|
|
|
static void kobil_write_callback( struct urb *purb, struct pt_regs *regs )
|
|
{
|
|
}
|
|
|
|
|
|
static int kobil_write (struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
int length = 0;
|
|
int result = 0;
|
|
int todo = 0;
|
|
struct kobil_private * priv;
|
|
|
|
if (count == 0) {
|
|
dbg("%s - port %d write request of 0 bytes", __FUNCTION__, port->number);
|
|
return 0;
|
|
}
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
|
|
if (count > (KOBIL_BUF_LENGTH - priv->filled)) {
|
|
dbg("%s - port %d Error: write request bigger than buffer size", __FUNCTION__, port->number);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
// Copy data to buffer
|
|
memcpy (priv->buf + priv->filled, buf, count);
|
|
|
|
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, priv->buf + priv->filled);
|
|
|
|
priv->filled = priv->filled + count;
|
|
|
|
|
|
// only send complete block. TWIN, KAAN SIM and adapter K use the same protocol.
|
|
if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) ||
|
|
((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) {
|
|
|
|
// stop reading (except TWIN and KAAN SIM)
|
|
if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) )
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
|
|
todo = priv->filled - priv->cur_pos;
|
|
|
|
while(todo > 0) {
|
|
// max 8 byte in one urb (endpoint size)
|
|
length = (todo < 8) ? todo : 8;
|
|
// copy data to transfer buffer
|
|
memcpy(port->write_urb->transfer_buffer, priv->buf + priv->cur_pos, length );
|
|
usb_fill_int_urb( port->write_urb,
|
|
port->serial->dev,
|
|
usb_sndintpipe(port->serial->dev, priv->write_int_endpoint_address),
|
|
port->write_urb->transfer_buffer,
|
|
length,
|
|
kobil_write_callback,
|
|
port,
|
|
8
|
|
);
|
|
|
|
priv->cur_pos = priv->cur_pos + length;
|
|
result = usb_submit_urb( port->write_urb, GFP_NOIO );
|
|
dbg("%s - port %d Send write URB returns: %i", __FUNCTION__, port->number, result);
|
|
todo = priv->filled - priv->cur_pos;
|
|
|
|
if (todo > 0) {
|
|
msleep(24);
|
|
}
|
|
|
|
} // end while
|
|
|
|
priv->filled = 0;
|
|
priv->cur_pos = 0;
|
|
|
|
// someone sets the dev to 0 if the close method has been called
|
|
port->interrupt_in_urb->dev = port->serial->dev;
|
|
|
|
// start reading (except TWIN and KAAN SIM)
|
|
if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) {
|
|
// someone sets the dev to 0 if the close method has been called
|
|
port->interrupt_in_urb->dev = port->serial->dev;
|
|
|
|
result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO );
|
|
dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
|
|
static int kobil_write_room (struct usb_serial_port *port)
|
|
{
|
|
//dbg("%s - port %d", __FUNCTION__, port->number);
|
|
return 8;
|
|
}
|
|
|
|
|
|
static int kobil_tiocmget(struct usb_serial_port *port, struct file *file)
|
|
{
|
|
struct kobil_private * priv;
|
|
int result;
|
|
unsigned char *transfer_buffer;
|
|
int transfer_buffer_length = 8;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
|
|
// This device doesn't support ioctl calls
|
|
return -EINVAL;
|
|
}
|
|
|
|
// allocate memory for transfer buffer
|
|
transfer_buffer = (unsigned char *) kmalloc(transfer_buffer_length, GFP_KERNEL);
|
|
if (!transfer_buffer) {
|
|
return -ENOMEM;
|
|
}
|
|
memset(transfer_buffer, 0, transfer_buffer_length);
|
|
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_GetStatusLineState,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
|
|
0,
|
|
0,
|
|
transfer_buffer,
|
|
transfer_buffer_length,
|
|
KOBIL_TIMEOUT);
|
|
|
|
dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x",
|
|
__FUNCTION__, port->number, result, transfer_buffer[0]);
|
|
|
|
if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) {
|
|
priv->line_state |= TIOCM_DSR;
|
|
} else {
|
|
priv->line_state &= ~TIOCM_DSR;
|
|
}
|
|
|
|
kfree(transfer_buffer);
|
|
return priv->line_state;
|
|
}
|
|
|
|
static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct kobil_private * priv;
|
|
int result;
|
|
int dtr = 0;
|
|
int rts = 0;
|
|
unsigned char *transfer_buffer;
|
|
int transfer_buffer_length = 8;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
|
|
// This device doesn't support ioctl calls
|
|
return -EINVAL;
|
|
}
|
|
|
|
// allocate memory for transfer buffer
|
|
transfer_buffer = (unsigned char *) kmalloc(transfer_buffer_length, GFP_KERNEL);
|
|
if (! transfer_buffer) {
|
|
return -ENOMEM;
|
|
}
|
|
memset(transfer_buffer, 0, transfer_buffer_length);
|
|
|
|
if (set & TIOCM_RTS)
|
|
rts = 1;
|
|
if (set & TIOCM_DTR)
|
|
dtr = 1;
|
|
if (clear & TIOCM_RTS)
|
|
rts = 0;
|
|
if (clear & TIOCM_DTR)
|
|
dtr = 0;
|
|
|
|
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
|
|
if (dtr != 0)
|
|
dbg("%s - port %d Setting DTR", __FUNCTION__, port->number);
|
|
else
|
|
dbg("%s - port %d Clearing DTR", __FUNCTION__, port->number);
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_SetStatusLinesOrQueues,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
|
|
0,
|
|
transfer_buffer,
|
|
0,
|
|
KOBIL_TIMEOUT);
|
|
} else {
|
|
if (rts != 0)
|
|
dbg("%s - port %d Setting RTS", __FUNCTION__, port->number);
|
|
else
|
|
dbg("%s - port %d Clearing RTS", __FUNCTION__, port->number);
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_SetStatusLinesOrQueues,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
|
|
0,
|
|
transfer_buffer,
|
|
0,
|
|
KOBIL_TIMEOUT);
|
|
}
|
|
dbg("%s - port %d Send set_status_line URB returns: %i", __FUNCTION__, port->number, result);
|
|
kfree(transfer_buffer);
|
|
return (result < 0) ? result : 0;
|
|
}
|
|
|
|
|
|
static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct kobil_private * priv;
|
|
int result;
|
|
unsigned short urb_val = 0;
|
|
unsigned char *transfer_buffer;
|
|
int transfer_buffer_length = 8;
|
|
char *settings;
|
|
void __user *user_arg = (void __user *)arg;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
|
|
// This device doesn't support ioctl calls
|
|
return 0;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case TCGETS: // 0x5401
|
|
if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios))) {
|
|
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
|
|
return -EFAULT;
|
|
}
|
|
if (kernel_termios_to_user_termios((struct termios __user *)arg,
|
|
&priv->internal_termios))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case TCSETS: // 0x5402
|
|
if (!(port->tty->termios)) {
|
|
dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
|
|
return -ENOTTY;
|
|
}
|
|
if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios))) {
|
|
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
|
|
return -EFAULT;
|
|
}
|
|
if (user_termios_to_kernel_termios(&priv->internal_termios,
|
|
(struct termios __user *)arg))
|
|
return -EFAULT;
|
|
|
|
settings = (unsigned char *) kmalloc(50, GFP_KERNEL);
|
|
if (! settings) {
|
|
return -ENOBUFS;
|
|
}
|
|
memset(settings, 0, 50);
|
|
|
|
switch (priv->internal_termios.c_cflag & CBAUD) {
|
|
case B1200:
|
|
urb_val = SUSBCR_SBR_1200;
|
|
strcat(settings, "1200 ");
|
|
break;
|
|
case B9600:
|
|
default:
|
|
urb_val = SUSBCR_SBR_9600;
|
|
strcat(settings, "9600 ");
|
|
break;
|
|
}
|
|
|
|
urb_val |= (priv->internal_termios.c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
|
|
strcat(settings, (priv->internal_termios.c_cflag & CSTOPB) ? "2 StopBits " : "1 StopBit ");
|
|
|
|
if (priv->internal_termios.c_cflag & PARENB) {
|
|
if (priv->internal_termios.c_cflag & PARODD) {
|
|
urb_val |= SUSBCR_SPASB_OddParity;
|
|
strcat(settings, "Odd Parity");
|
|
} else {
|
|
urb_val |= SUSBCR_SPASB_EvenParity;
|
|
strcat(settings, "Even Parity");
|
|
}
|
|
} else {
|
|
urb_val |= SUSBCR_SPASB_NoParity;
|
|
strcat(settings, "No Parity");
|
|
}
|
|
dbg("%s - port %d setting port to: %s", __FUNCTION__, port->number, settings );
|
|
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_SetBaudRateParityAndStopBits,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
urb_val,
|
|
0,
|
|
settings,
|
|
0,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
|
|
dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
|
|
kfree(settings);
|
|
return 0;
|
|
|
|
case TCFLSH: // 0x540B
|
|
transfer_buffer = (unsigned char *) kmalloc(transfer_buffer_length, GFP_KERNEL);
|
|
if (! transfer_buffer) {
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
result = usb_control_msg( port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0 ),
|
|
SUSBCRequest_Misc,
|
|
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
|
SUSBCR_MSC_ResetAllQueues,
|
|
0,
|
|
NULL,//transfer_buffer,
|
|
0,
|
|
KOBIL_TIMEOUT
|
|
);
|
|
|
|
dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
|
|
|
|
kfree(transfer_buffer);
|
|
return ((result < 0) ? -EFAULT : 0);
|
|
|
|
}
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
|
|
static int __init kobil_init (void)
|
|
{
|
|
int retval;
|
|
retval = usb_serial_register(&kobil_device);
|
|
if (retval)
|
|
goto failed_usb_serial_register;
|
|
retval = usb_register(&kobil_driver);
|
|
if (retval)
|
|
goto failed_usb_register;
|
|
|
|
info(DRIVER_VERSION " " DRIVER_AUTHOR);
|
|
info(DRIVER_DESC);
|
|
|
|
return 0;
|
|
failed_usb_register:
|
|
usb_serial_deregister(&kobil_device);
|
|
failed_usb_serial_register:
|
|
return retval;
|
|
}
|
|
|
|
|
|
static void __exit kobil_exit (void)
|
|
{
|
|
usb_deregister (&kobil_driver);
|
|
usb_serial_deregister (&kobil_device);
|
|
}
|
|
|
|
module_init(kobil_init);
|
|
module_exit(kobil_exit);
|
|
|
|
MODULE_AUTHOR( DRIVER_AUTHOR );
|
|
MODULE_DESCRIPTION( DRIVER_DESC );
|
|
MODULE_LICENSE( "GPL" );
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|