kernel-fxtec-pro1x/drivers/tty/serial
Ricardo Ribalda Delgado 017bec38c0 serial/8250_fintek: Support for multiple base_ports
Fintek chip can be connected at address 0x4e and also 0x2e.
Add some logic to find out the address of the chip.

Reported-by: Peter Hong <peter_hong@fintek.com.tw>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:14:42 -07:00
..
8250 serial/8250_fintek: Support for multiple base_ports 2015-07-23 15:14:42 -07:00
cpm_uart tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 2015-03-26 23:00:36 +01:00
jsm serial: jsm: some off by one bugs 2015-03-26 23:00:36 +01:00
21285.c
68328serial.c tty: 68328serial.c: move assignment out of if () block 2015-05-10 19:04:16 +02:00
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
amba-pl010.c
amba-pl011.c drivers: PL011: add ACPI probing for SBSA UART 2015-05-24 13:08:51 -07:00
apbuart.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
apbuart.h
ar933x_uart.c
arc_uart.c
atmel_serial.c tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send 2015-05-24 12:49:16 -07:00
bcm63xx_uart.c
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial: bfin: ctsrts: enfore Kconfig naming convention 2015-05-06 22:26:59 +02:00
clps711x.c
crisv10.c tty: crisv10.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
crisv10.h
digicolor-usart.c
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Add support for big-endian MMIO accesses 2015-06-01 06:55:12 +09:00
efm32-uart.c
etraxfs-uart.c
fsl_lpuart.c Merge 4.0-rc7 into tty-next 2015-04-07 11:07:20 +02:00
icom.c tty: icom.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c serial: ifx6x60: Remove superfluous casts when calling request_irq() 2015-05-06 22:27:01 +02:00
ifx6x60.h
imx.c Merge 4.1-rc7 into tty-next 2015-06-08 10:49:28 -07:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig TTY/Serial driver patches for 4.2-rc1 2015-06-26 15:53:22 -07:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c
lpc32xx_hs.c
m32r_sio.c
m32r_sio.h
m32r_sio_reg.h
Makefile serial: stm32-usart: Add STM32 USART Driver 2015-06-10 17:34:26 -07:00
max310x.c
max3100.c
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c
meson_uart.c ARM: meson: serial: convert iounmap to devm_iounmap 2015-05-06 22:27:02 +02:00
mpc52xx_uart.c drivers/tty/serial/mpc52xx_uart.c: fix typo in C comment 2015-05-06 22:26:59 +02:00
mpsc.c tty: mpsc.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
msm_serial.c
msm_serial.h tty: serial: msm_serial: Remove dead code 2015-03-26 22:31:09 +01:00
mux.c
mxs-auart.c serial: mxs: Constify platform_device_id 2015-05-10 19:08:16 +02:00
netx-serial.c
nwpserial.c
of_serial.c serial: of_serial: check the return value of clk_prepare_enable() 2015-06-01 06:55:12 +09:00
omap-serial.c serial: omap: Switch wake-up interrupt to generic wakeirq 2015-06-09 23:35:00 -07:00
pch_uart.c
pmac_zilog.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Constify platform_device_id 2015-05-10 19:08:16 +02:00
samsung.h
sb1250-duart.c
sc16is7xx.c sc16is7xx: use kworker for RS-485 configuration 2015-06-01 06:47:27 +09:00
sccnxp.c
serial-tegra.c serial: tegra: Fix memory leak on DMA setup failure 2015-05-24 12:53:44 -07:00
serial_core.c serial: core: cleanup in uart_get_baud_rate() 2015-06-12 17:34:36 -07:00
serial_ks8695.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c TTY/Serial driver patches for 4.2-rc1 2015-06-26 15:53:22 -07:00
serial_mctrl_gpio.h
serial_txx9.c
sh-sci.c TTY/Serial driver patches for 4.2-rc1 2015-06-26 15:53:22 -07:00
sh-sci.h serial: sh-sci: Replace hardcoded overrun bit values 2015-05-10 19:06:39 +02:00
sirfsoc_uart.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
sirfsoc_uart.h serial: sirf: use hrtimer for data rx 2015-06-01 06:51:37 +09:00
sn_console.c
sprd_serial.c serial: sprd: check for NULL after calling devm_clk_get 2015-06-12 17:39:50 -07:00
st-asc.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
stm32-usart.c serial: stm32-usart: Add STM32 USART Driver 2015-06-10 17:34:26 -07:00
suncore.c
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c serial: xilinx: Use platform_get_irq to get irq description structure 2015-04-28 14:26:21 +02:00
ucc_uart.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c serial: xuartps: add __init to earlycon write method 2015-05-10 19:10:08 +02:00
zs.c
zs.h