kernel-fxtec-pro1x/arch/mips/pci/fixup-malta.c
Paul Burton 9e53481eea MIPS: Malta: Let PIIX4 respond to PCI special cycles
This patch enables the PIIX4 to respond to special cycles on the PCI
bus. One such special cycle must be used in order to enter a suspend
state, and if response to it is not enabled then the suspend state will
never be entered.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6904/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30 21:01:09 +02:00

158 lines
4.6 KiB
C

#include <linux/init.h>
#include <linux/pci.h>
#include <asm/mips-boards/piix4.h>
/* PCI interrupt pins */
#define PCIA 1
#define PCIB 2
#define PCIC 3
#define PCID 4
/* This table is filled in by interrogating the PIIX4 chip */
static char pci_irq[5] = {
};
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* 0: GT64120 PCI bridge */
{0, 0, 0, 0, 0 }, /* 1: Unused */
{0, 0, 0, 0, 0 }, /* 2: Unused */
{0, 0, 0, 0, 0 }, /* 3: Unused */
{0, 0, 0, 0, 0 }, /* 4: Unused */
{0, 0, 0, 0, 0 }, /* 5: Unused */
{0, 0, 0, 0, 0 }, /* 6: Unused */
{0, 0, 0, 0, 0 }, /* 7: Unused */
{0, 0, 0, 0, 0 }, /* 8: Unused */
{0, 0, 0, 0, 0 }, /* 9: Unused */
{0, 0, 0, 0, PCID }, /* 10: PIIX4 USB */
{0, PCIB, 0, 0, 0 }, /* 11: AMD 79C973 Ethernet */
{0, PCIC, 0, 0, 0 }, /* 12: Crystal 4281 Sound */
{0, 0, 0, 0, 0 }, /* 13: Unused */
{0, 0, 0, 0, 0 }, /* 14: Unused */
{0, 0, 0, 0, 0 }, /* 15: Unused */
{0, 0, 0, 0, 0 }, /* 16: Unused */
{0, 0, 0, 0, 0 }, /* 17: Bonito/SOC-it PCI Bridge*/
{0, PCIA, PCIB, PCIC, PCID }, /* 18: PCI Slot 1 */
{0, PCIB, PCIC, PCID, PCIA }, /* 19: PCI Slot 2 */
{0, PCIC, PCID, PCIA, PCIB }, /* 20: PCI Slot 3 */
{0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int virq;
virq = irq_tab[slot][pin];
return pci_irq[virq];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
static void malta_piix_func3_base_fixup(struct pci_dev *dev)
{
/* Set a sane PM I/O base address */
pci_write_config_word(dev, PIIX4_FUNC3_PMBA, 0x1000);
/* Enable access to the PM I/O region */
pci_write_config_byte(dev, PIIX4_FUNC3_PMREGMISC,
PIIX4_FUNC3_PMREGMISC_EN);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
malta_piix_func3_base_fixup);
static void malta_piix_func0_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
u32 reg_val32;
u16 reg_val16;
/* PIIX PIRQC[A:D] irq mappings */
static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
12, 0, 14, 15
};
int i;
/* Interrogate PIIX4 to get PCI IRQ mapping */
for (i = 0; i <= 3; i++) {
pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, &reg_val);
if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE)
pci_irq[PCIA+i] = 0; /* Disabled */
else
pci_irq[PCIA+i] = piixirqmap[reg_val &
PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK];
}
/* Done by YAMON 2.00 onwards */
if (PCI_SLOT(pdev->devfn) == 10) {
/*
* Set top of main memory accessible by ISA or DMA
* devices to 16 Mb.
*/
pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, &reg_val);
pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
}
/* Mux SERIRQ to its pin */
pci_read_config_dword(pdev, PIIX4_FUNC0_GENCFG, &reg_val32);
pci_write_config_dword(pdev, PIIX4_FUNC0_GENCFG,
reg_val32 | PIIX4_FUNC0_GENCFG_SERIRQ);
/* Enable SERIRQ */
pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, &reg_val);
reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT;
pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val);
/* Enable response to special cycles */
pci_read_config_word(pdev, PCI_COMMAND, &reg_val16);
pci_write_config_word(pdev, PCI_COMMAND,
reg_val16 | PCI_COMMAND_SPECIAL);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
malta_piix_func0_fixup);
static void malta_piix_func1_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
/* Done by YAMON 2.02 onwards */
if (PCI_SLOT(pdev->devfn) == 10) {
/*
* IDE Decode enable.
*/
pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
&reg_val);
pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN);
pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
&reg_val);
pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,
malta_piix_func1_fixup);
/* Enable PCI 2.1 compatibility in PIIX4 */
static void quirk_dlcsetup(struct pci_dev *dev)
{
u8 odlc, ndlc;
(void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc);
/* Enable passive releases and delayed transaction */
ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN |
PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN |
PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN;
(void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
quirk_dlcsetup);