/* * ata_generic.c - Generic PATA/SATA controller driver. * Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> * * May be copied or modified under the terms of the GNU General Public License * * Driver for PCI IDE interfaces implementing the standard bus mastering * interface functionality. This assumes the BIOS did the drive set up and * tuning for us. By default we do not grab all IDE class devices as they * may have other drivers or need fixups to avoid problems. Instead we keep * a default list of stuff without documentation/driver that appears to * work. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "ata_generic" #define DRV_VERSION "0.2.15" /* * A generic parallel ATA driver using libata */ /** * generic_set_mode - mode setting * @link: link to set up * @unused: returned device on error * * Use a non standard set_mode function. We don't want to be tuned. * The BIOS configured everything. Our job is not to fiddle. We * read the dma enabled bits from the PCI configuration of the device * and respect them. */ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) { struct ata_port *ap = link->ap; int dma_enabled = 0; struct ata_device *dev; struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); if (pdev->vendor == PCI_VENDOR_ID_CENATEK) dma_enabled = 0xFF; ata_for_each_dev(dev, link, ENABLED) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + dev->devno))) { unsigned int xfer_mask = ata_id_xfermask(dev->id); const char *name; if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) name = ata_mode_string(xfer_mask); else { /* SWDMA perhaps? */ name = "DMA"; xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0); } ata_dev_printk(dev, KERN_INFO, "configured for %s\n", name); dev->xfer_mode = ata_xfer_mask2mode(xfer_mask); dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode); dev->flags &= ~ATA_DFLAG_PIO; } else { ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; } } return 0; } static struct scsi_host_template generic_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations generic_port_ops = { .inherits = &ata_bmdma_port_ops, .cable_detect = ata_cable_unknown, .set_mode = generic_set_mode, }; static int all_generic_ide; /* Set to claim all devices */ /** * ata_generic_init - attach generic IDE * @dev: PCI device found * @id: match entry * * Called each time a matching IDE interface is found. We check if the * interface is one we wish to claim and if so we perform any chip * specific hacks then let the ATA layer do the heavy lifting. */ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u16 command; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &generic_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; /* Don't use the generic entry unless instructed to do so */ if (id->driver_data == 1 && all_generic_ide == 0) return -ENODEV; /* Devices that need care */ if (dev->vendor == PCI_VENDOR_ID_UMC && dev->device == PCI_DEVICE_ID_UMC_UM8886A && (!(PCI_FUNC(dev->devfn) & 1))) return -ENODEV; if (dev->vendor == PCI_VENDOR_ID_OPTI && dev->device == PCI_DEVICE_ID_OPTI_82C558 && (!(PCI_FUNC(dev->devfn) & 1))) return -ENODEV; /* Don't re-enable devices in generic mode or we will break some motherboards with disabled and unused IDE controllers */ pci_read_config_word(dev, PCI_COMMAND, &command); if (!(command & PCI_COMMAND_IO)) return -ENODEV; if (dev->vendor == PCI_VENDOR_ID_AL) ata_pci_bmdma_clear_simplex(dev); if (dev->vendor == PCI_VENDOR_ID_ATI) { int rc = pcim_enable_device(dev); if (rc < 0) return rc; pcim_pin_device(dev); } return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL); } static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, /* Must come last. If you add entries adjust this table appropriately */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, { 0, }, }; static struct pci_driver ata_generic_pci_driver = { .name = DRV_NAME, .id_table = ata_generic, .probe = ata_generic_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, #endif }; static int __init ata_generic_init(void) { return pci_register_driver(&ata_generic_pci_driver); } static void __exit ata_generic_exit(void) { pci_unregister_driver(&ata_generic_pci_driver); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for generic ATA"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, ata_generic); MODULE_VERSION(DRV_VERSION); module_init(ata_generic_init); module_exit(ata_generic_exit); module_param(all_generic_ide, int, 0);