/* * arch/arm/mach-ep93xx/core.c * Core routines for Cirrus EP93xx chips. * * Copyright (C) 2006 Lennert Buytenhek * Copyright (C) 2007 Herbert Valerio Riedel * * Thanks go to Michael Burian and Ray Lehtiniemi for their key * role in the ep93xx linux community. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /************************************************************************* * Static I/O mappings that are needed for all EP93xx platforms *************************************************************************/ static struct map_desc ep93xx_io_desc[] __initdata = { { .virtual = EP93XX_AHB_VIRT_BASE, .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), .length = EP93XX_AHB_SIZE, .type = MT_DEVICE, }, { .virtual = EP93XX_APB_VIRT_BASE, .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), .length = EP93XX_APB_SIZE, .type = MT_DEVICE, }, }; void __init ep93xx_map_io(void) { iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); } /************************************************************************* * Timer handling for EP93xx ************************************************************************* * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, * is free-running, and can't generate interrupts. * * The 508 kHz timers are ideal for use for the timer interrupt, as the * most common values of HZ divide 508 kHz nicely. We pick one of the 16 * bit timers (timer 1) since we don't need more than 16 bits of reload * value as long as HZ >= 8. * * The higher clock rate of timer 4 makes it a better choice than the * other timers for use in gettimeoffset(), while the fact that it can't * generate interrupts means we don't have to worry about not being able * to use this timer for something else. We also use timer 4 for keeping * track of lost jiffies. */ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) >= TIMER4_TICKS_PER_JIFFY) { last_jiffy_time += TIMER4_TICKS_PER_JIFFY; timer_tick(); } return IRQ_HANDLED; } static struct irqaction ep93xx_timer_irq = { .name = "ep93xx timer", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = ep93xx_timer_interrupt, }; static void __init ep93xx_timer_init(void) { /* Enable periodic HZ timer. */ __raw_writel(0x48, EP93XX_TIMER1_CONTROL); __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD); __raw_writel(0xc8, EP93XX_TIMER1_CONTROL); /* Enable lost jiffy timer. */ __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH); setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); } static unsigned long ep93xx_gettimeoffset(void) { int offset; offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; /* Calculate (1000000 / 983040) * offset. */ return offset + (53 * offset / 3072); } struct sys_timer ep93xx_timer = { .init = ep93xx_timer_init, .offset = ep93xx_gettimeoffset, }; /************************************************************************* * GPIO handling for EP93xx *************************************************************************/ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; static unsigned char gpio_int_debounce[3]; /* Port ordering is: A B F */ static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); __raw_writeb(gpio_int_type2[port], EP93XX_GPIO_REG(int_type2_register_offset[port])); __raw_writeb(gpio_int_type1[port], EP93XX_GPIO_REG(int_type1_register_offset[port])); __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], EP93XX_GPIO_REG(int_en_register_offset[port])); } void ep93xx_gpio_int_mask(unsigned line) { gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } void ep93xx_gpio_int_debounce(unsigned int irq, int enable) { int line = irq_to_gpio(irq); int port = line >> 3; int port_mask = 1 << (line & 7); if (enable) gpio_int_debounce[port] |= port_mask; else gpio_int_debounce[port] &= ~port_mask; __raw_writeb(gpio_int_debounce[port], EP93XX_GPIO_REG(int_debounce_register_offset[port])); } EXPORT_SYMBOL(ep93xx_gpio_int_debounce); /************************************************************************* * EP93xx IRQ handling *************************************************************************/ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned char status; int i; status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; generic_handle_irq(gpio_irq); } } status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; generic_handle_irq(gpio_irq); } } } static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* * map discontiguous hw irq range to continous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; generic_handle_irq(gpio_irq); } static void ep93xx_gpio_irq_ack(unsigned int irq) { int line = irq_to_gpio(irq); int port = line >> 3; int port_mask = 1 << (line & 7); if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ ep93xx_gpio_update_int_params(port); } __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { int line = irq_to_gpio(irq); int port = line >> 3; int port_mask = 1 << (line & 7); if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; ep93xx_gpio_update_int_params(port); __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } static void ep93xx_gpio_irq_mask(unsigned int irq) { int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); ep93xx_gpio_update_int_params(port); } static void ep93xx_gpio_irq_unmask(unsigned int irq) { int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); ep93xx_gpio_update_int_params(port); } /* * gpio_int_type1 controls whether the interrupt is level (0) or * edge (1) triggered, while gpio_int_type2 controls whether it * triggers on low/falling (0) or high/rising (1). */ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { struct irq_desc *desc = irq_desc + irq; const int gpio = irq_to_gpio(irq); const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); gpio_direction_input(gpio); switch (type) { case IRQ_TYPE_EDGE_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_edge_irq; break; case IRQ_TYPE_EDGE_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_edge_irq; break; case IRQ_TYPE_LEVEL_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_level_irq; break; case IRQ_TYPE_LEVEL_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_level_irq; break; case IRQ_TYPE_EDGE_BOTH: gpio_int_type1[port] |= port_mask; /* set initial polarity based on current input level */ if (gpio_get_value(gpio)) gpio_int_type2[port] &= ~port_mask; /* falling */ else gpio_int_type2[port] |= port_mask; /* rising */ desc->handle_irq = handle_edge_irq; break; default: pr_err("failed to set irq type %d for gpio %d\n", type, gpio); return -EINVAL; } gpio_int_enabled[port] |= port_mask; desc->status &= ~IRQ_TYPE_SENSE_MASK; desc->status |= type & IRQ_TYPE_SENSE_MASK; ep93xx_gpio_update_int_params(port); return 0; } static struct irq_chip ep93xx_gpio_irq_chip = { .name = "GPIO", .ack = ep93xx_gpio_irq_ack, .mask_ack = ep93xx_gpio_irq_mask_ack, .mask = ep93xx_gpio_irq_mask, .unmask = ep93xx_gpio_irq_unmask, .set_type = ep93xx_gpio_irq_type, }; void __init ep93xx_init_irq(void) { int gpio_irq; vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); for (gpio_irq = gpio_to_irq(0); gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); set_irq_handler(gpio_irq, handle_level_irq); set_irq_flags(gpio_irq, IRQF_VALID); } set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler); set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler); } /************************************************************************* * EP93xx System Controller Software Locked register handling *************************************************************************/ /* * syscon_swlock prevents anything else from writing to the syscon * block while a software locked register is being written. */ static DEFINE_SPINLOCK(syscon_swlock); void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) { unsigned long flags; spin_lock_irqsave(&syscon_swlock, flags); __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(val, reg); spin_unlock_irqrestore(&syscon_swlock, flags); } EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) { unsigned long flags; unsigned int val; spin_lock_irqsave(&syscon_swlock, flags); val = __raw_readl(EP93XX_SYSCON_DEVCFG); val |= set_bits; val &= ~clear_bits; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(val, EP93XX_SYSCON_DEVCFG); spin_unlock_irqrestore(&syscon_swlock, flags); } EXPORT_SYMBOL(ep93xx_devcfg_set_clear); /************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) static void ep93xx_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { unsigned int mcr; mcr = 0; if (!(mctrl & TIOCM_RTS)) mcr |= 2; if (!(mctrl & TIOCM_DTR)) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); } static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; static struct amba_device uart1_device = { .dev = { .init_name = "apb:uart1", .platform_data = &ep93xx_uart_data, }, .res = { .start = EP93XX_UART1_PHYS_BASE, .end = EP93XX_UART1_PHYS_BASE + 0x0fff, .flags = IORESOURCE_MEM, }, .irq = { IRQ_EP93XX_UART1, NO_IRQ }, .periphid = 0x00041010, }; static struct amba_device uart2_device = { .dev = { .init_name = "apb:uart2", .platform_data = &ep93xx_uart_data, }, .res = { .start = EP93XX_UART2_PHYS_BASE, .end = EP93XX_UART2_PHYS_BASE + 0x0fff, .flags = IORESOURCE_MEM, }, .irq = { IRQ_EP93XX_UART2, NO_IRQ }, .periphid = 0x00041010, }; static struct amba_device uart3_device = { .dev = { .init_name = "apb:uart3", .platform_data = &ep93xx_uart_data, }, .res = { .start = EP93XX_UART3_PHYS_BASE, .end = EP93XX_UART3_PHYS_BASE + 0x0fff, .flags = IORESOURCE_MEM, }, .irq = { IRQ_EP93XX_UART3, NO_IRQ }, .periphid = 0x00041010, }; static struct resource ep93xx_rtc_resource[] = { { .start = EP93XX_RTC_PHYS_BASE, .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device ep93xx_rtc_device = { .name = "ep93xx-rtc", .id = -1, .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), .resource = ep93xx_rtc_resource, }; static struct resource ep93xx_ohci_resources[] = { [0] = { .start = EP93XX_USB_PHYS_BASE, .end = EP93XX_USB_PHYS_BASE + 0x0fff, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_EP93XX_USB, .end = IRQ_EP93XX_USB, .flags = IORESOURCE_IRQ, }, }; static struct platform_device ep93xx_ohci_device = { .name = "ep93xx-ohci", .id = -1, .dev = { .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), .resource = ep93xx_ohci_resources, }; static struct ep93xx_eth_data ep93xx_eth_data; static struct resource ep93xx_eth_resource[] = { { .start = EP93XX_ETHERNET_PHYS_BASE, .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, .flags = IORESOURCE_MEM, }, { .start = IRQ_EP93XX_ETHERNET, .end = IRQ_EP93XX_ETHERNET, .flags = IORESOURCE_IRQ, } }; static struct platform_device ep93xx_eth_device = { .name = "ep93xx-eth", .id = -1, .dev = { .platform_data = &ep93xx_eth_data, }, .num_resources = ARRAY_SIZE(ep93xx_eth_resource), .resource = ep93xx_eth_resource, }; void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) { if (copy_addr) memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); ep93xx_eth_data = *data; platform_device_register(&ep93xx_eth_device); } /************************************************************************* * EP93xx i2c peripheral handling *************************************************************************/ static struct i2c_gpio_platform_data ep93xx_i2c_data; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", .id = 0, .dev.platform_data = &ep93xx_i2c_data, }; void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num) { /* * Set the EEPROM interface pin drive type control. * Defines the driver type for the EECLK and EEDAT pins as either * open drain, which will require an external pull-up, or a normal * CMOS driver. */ if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) pr_warning("sda != EEDAT, open drain has no effect\n"); if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) pr_warning("scl != EECLK, open drain has no effect\n"); __raw_writel((data->sda_is_open_drain << 1) | (data->scl_is_open_drain << 0), EP93XX_GPIO_EEDRIVE); ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); platform_device_register(&ep93xx_i2c_device); } /************************************************************************* * EP93xx LEDs *************************************************************************/ static struct gpio_led ep93xx_led_pins[] = { { .name = "platform:grled", .gpio = EP93XX_GPIO_LINE_GRLED, }, { .name = "platform:rdled", .gpio = EP93XX_GPIO_LINE_RDLED, }, }; static struct gpio_led_platform_data ep93xx_led_data = { .num_leds = ARRAY_SIZE(ep93xx_led_pins), .leds = ep93xx_led_pins, }; static struct platform_device ep93xx_leds = { .name = "leds-gpio", .id = -1, .dev = { .platform_data = &ep93xx_led_data, }, }; /************************************************************************* * EP93xx pwm peripheral handling *************************************************************************/ static struct resource ep93xx_pwm0_resource[] = { { .start = EP93XX_PWM_PHYS_BASE, .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device ep93xx_pwm0_device = { .name = "ep93xx-pwm", .id = 0, .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), .resource = ep93xx_pwm0_resource, }; static struct resource ep93xx_pwm1_resource[] = { { .start = EP93XX_PWM_PHYS_BASE + 0x20, .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device ep93xx_pwm1_device = { .name = "ep93xx-pwm", .id = 1, .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), .resource = ep93xx_pwm1_resource, }; void __init ep93xx_register_pwm(int pwm0, int pwm1) { if (pwm0) platform_device_register(&ep93xx_pwm0_device); /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ if (pwm1) platform_device_register(&ep93xx_pwm1_device); } int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { int err; if (pdev->id == 0) { err = 0; } else if (pdev->id == 1) { err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, dev_name(&pdev->dev)); if (err) return err; err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); if (err) goto fail; /* PWM 1 output on EGPIO[14] */ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); } else { err = -ENODEV; } return err; fail: gpio_free(EP93XX_GPIO_LINE_EGPIO14); return err; } EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); void ep93xx_pwm_release_gpio(struct platform_device *pdev) { if (pdev->id == 1) { gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); gpio_free(EP93XX_GPIO_LINE_EGPIO14); /* EGPIO[14] used for GPIO */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); } } EXPORT_SYMBOL(ep93xx_pwm_release_gpio); /************************************************************************* * EP93xx video peripheral handling *************************************************************************/ static struct ep93xxfb_mach_info ep93xxfb_data; static struct resource ep93xx_fb_resource[] = { { .start = EP93XX_RASTER_PHYS_BASE, .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device ep93xx_fb_device = { .name = "ep93xx-fb", .id = -1, .dev = { .platform_data = &ep93xxfb_data, .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_fb_resource), .resource = ep93xx_fb_resource, }; void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) { ep93xxfb_data = *data; platform_device_register(&ep93xx_fb_device); } /************************************************************************* * EP93xx matrix keypad peripheral handling *************************************************************************/ static struct resource ep93xx_keypad_resource[] = { { .start = EP93XX_KEY_MATRIX_PHYS_BASE, .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1, .flags = IORESOURCE_MEM, }, { .start = IRQ_EP93XX_KEY, .end = IRQ_EP93XX_KEY, .flags = IORESOURCE_IRQ, }, }; static struct platform_device ep93xx_keypad_device = { .name = "ep93xx-keypad", .id = -1, .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), .resource = ep93xx_keypad_resource, }; void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) { ep93xx_keypad_device.dev.platform_data = data; platform_device_register(&ep93xx_keypad_device); } int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { int err; int i; for (i = 0; i < 8; i++) { err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); if (err) goto fail_gpio_c; err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); if (err) goto fail_gpio_d; } /* Enable the keypad controller; GPIO ports C and D used for keypad */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | EP93XX_SYSCON_DEVCFG_GONK); return 0; fail_gpio_d: gpio_free(EP93XX_GPIO_LINE_C(i)); fail_gpio_c: for ( ; i >= 0; --i) { gpio_free(EP93XX_GPIO_LINE_C(i)); gpio_free(EP93XX_GPIO_LINE_D(i)); } return err; } EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); void ep93xx_keypad_release_gpio(struct platform_device *pdev) { int i; for (i = 0; i < 8; i++) { gpio_free(EP93XX_GPIO_LINE_C(i)); gpio_free(EP93XX_GPIO_LINE_D(i)); } /* Disable the keypad controller; GPIO ports C and D used for GPIO */ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | EP93XX_SYSCON_DEVCFG_GONK); } EXPORT_SYMBOL(ep93xx_keypad_release_gpio); extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); ep93xx_gpio_init(); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); amba_device_register(&uart3_device, &iomem_resource); platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); platform_device_register(&ep93xx_leds); }