/* Broadcom B43 wireless driver Copyright (c) 2005 Martin Langer Copyright (c) 2005 Stefano Brivio Copyright (c) 2005, 2006 Michael Buesch Copyright (c) 2005 Danny van Dyk Copyright (c) 2005 Andreas Jaggi Some parts of the code in this file are derived from the ipw2200 driver Copyright(c) 2003 - 2004 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, Boston, MA 02110-1301, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "b43.h" #include "main.h" #include "debugfs.h" #include "phy_common.h" #include "phy_g.h" #include "phy_n.h" #include "dma.h" #include "pio.h" #include "sysfs.h" #include "xmit.h" #include "lo.h" #include "pcmcia.h" MODULE_DESCRIPTION("Broadcom B43 wireless driver"); MODULE_AUTHOR("Martin Langer"); MODULE_AUTHOR("Stefano Brivio"); MODULE_AUTHOR("Michael Buesch"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID); static int modparam_bad_frames_preempt; module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames Preemption"); static char modparam_fwpostfix[16]; module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444); MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load."); static int modparam_hwpctl; module_param_named(hwpctl, modparam_hwpctl, int, 0444); MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)"); static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); int b43_modparam_qos = 1; module_param_named(qos, b43_modparam_qos, int, 0444); MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); static int modparam_btcoex = 1; module_param_named(btcoex, modparam_btcoex, int, 0444); MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)"); static const struct ssb_device_id b43_ssb_tbl[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16), SSB_DEVTABLE_END }; MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); /* Channel and ratetables are shared for all devices. * They can't be const, because ieee80211 puts some precalculated * data in there. This data is the same for all devices, so we don't * get concurrency issues */ #define RATETAB_ENT(_rateid, _flags) \ { \ .bitrate = B43_RATE_TO_BASE100KBPS(_rateid), \ .hw_value = (_rateid), \ .flags = (_flags), \ } /* * NOTE: When changing this, sync with xmit.c's * b43_plcp_get_bitrate_idx_* functions! */ static struct ieee80211_rate __b43_ratetable[] = { RATETAB_ENT(B43_CCK_RATE_1MB, 0), RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE), RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE), RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE), RATETAB_ENT(B43_OFDM_RATE_6MB, 0), RATETAB_ENT(B43_OFDM_RATE_9MB, 0), RATETAB_ENT(B43_OFDM_RATE_12MB, 0), RATETAB_ENT(B43_OFDM_RATE_18MB, 0), RATETAB_ENT(B43_OFDM_RATE_24MB, 0), RATETAB_ENT(B43_OFDM_RATE_36MB, 0), RATETAB_ENT(B43_OFDM_RATE_48MB, 0), RATETAB_ENT(B43_OFDM_RATE_54MB, 0), }; #define b43_a_ratetable (__b43_ratetable + 4) #define b43_a_ratetable_size 8 #define b43_b_ratetable (__b43_ratetable + 0) #define b43_b_ratetable_size 4 #define b43_g_ratetable (__b43_ratetable + 0) #define b43_g_ratetable_size 12 #define CHAN4G(_channel, _freq, _flags) { \ .band = IEEE80211_BAND_2GHZ, \ .center_freq = (_freq), \ .hw_value = (_channel), \ .flags = (_flags), \ .max_antenna_gain = 0, \ .max_power = 30, \ } static struct ieee80211_channel b43_2ghz_chantable[] = { CHAN4G(1, 2412, 0), CHAN4G(2, 2417, 0), CHAN4G(3, 2422, 0), CHAN4G(4, 2427, 0), CHAN4G(5, 2432, 0), CHAN4G(6, 2437, 0), CHAN4G(7, 2442, 0), CHAN4G(8, 2447, 0), CHAN4G(9, 2452, 0), CHAN4G(10, 2457, 0), CHAN4G(11, 2462, 0), CHAN4G(12, 2467, 0), CHAN4G(13, 2472, 0), CHAN4G(14, 2484, 0), }; #undef CHAN4G #define CHAN5G(_channel, _flags) { \ .band = IEEE80211_BAND_5GHZ, \ .center_freq = 5000 + (5 * (_channel)), \ .hw_value = (_channel), \ .flags = (_flags), \ .max_antenna_gain = 0, \ .max_power = 30, \ } static struct ieee80211_channel b43_5ghz_nphy_chantable[] = { CHAN5G(32, 0), CHAN5G(34, 0), CHAN5G(36, 0), CHAN5G(38, 0), CHAN5G(40, 0), CHAN5G(42, 0), CHAN5G(44, 0), CHAN5G(46, 0), CHAN5G(48, 0), CHAN5G(50, 0), CHAN5G(52, 0), CHAN5G(54, 0), CHAN5G(56, 0), CHAN5G(58, 0), CHAN5G(60, 0), CHAN5G(62, 0), CHAN5G(64, 0), CHAN5G(66, 0), CHAN5G(68, 0), CHAN5G(70, 0), CHAN5G(72, 0), CHAN5G(74, 0), CHAN5G(76, 0), CHAN5G(78, 0), CHAN5G(80, 0), CHAN5G(82, 0), CHAN5G(84, 0), CHAN5G(86, 0), CHAN5G(88, 0), CHAN5G(90, 0), CHAN5G(92, 0), CHAN5G(94, 0), CHAN5G(96, 0), CHAN5G(98, 0), CHAN5G(100, 0), CHAN5G(102, 0), CHAN5G(104, 0), CHAN5G(106, 0), CHAN5G(108, 0), CHAN5G(110, 0), CHAN5G(112, 0), CHAN5G(114, 0), CHAN5G(116, 0), CHAN5G(118, 0), CHAN5G(120, 0), CHAN5G(122, 0), CHAN5G(124, 0), CHAN5G(126, 0), CHAN5G(128, 0), CHAN5G(130, 0), CHAN5G(132, 0), CHAN5G(134, 0), CHAN5G(136, 0), CHAN5G(138, 0), CHAN5G(140, 0), CHAN5G(142, 0), CHAN5G(144, 0), CHAN5G(145, 0), CHAN5G(146, 0), CHAN5G(147, 0), CHAN5G(148, 0), CHAN5G(149, 0), CHAN5G(150, 0), CHAN5G(151, 0), CHAN5G(152, 0), CHAN5G(153, 0), CHAN5G(154, 0), CHAN5G(155, 0), CHAN5G(156, 0), CHAN5G(157, 0), CHAN5G(158, 0), CHAN5G(159, 0), CHAN5G(160, 0), CHAN5G(161, 0), CHAN5G(162, 0), CHAN5G(163, 0), CHAN5G(164, 0), CHAN5G(165, 0), CHAN5G(166, 0), CHAN5G(168, 0), CHAN5G(170, 0), CHAN5G(172, 0), CHAN5G(174, 0), CHAN5G(176, 0), CHAN5G(178, 0), CHAN5G(180, 0), CHAN5G(182, 0), CHAN5G(184, 0), CHAN5G(186, 0), CHAN5G(188, 0), CHAN5G(190, 0), CHAN5G(192, 0), CHAN5G(194, 0), CHAN5G(196, 0), CHAN5G(198, 0), CHAN5G(200, 0), CHAN5G(202, 0), CHAN5G(204, 0), CHAN5G(206, 0), CHAN5G(208, 0), CHAN5G(210, 0), CHAN5G(212, 0), CHAN5G(214, 0), CHAN5G(216, 0), CHAN5G(218, 0), CHAN5G(220, 0), CHAN5G(222, 0), CHAN5G(224, 0), CHAN5G(226, 0), CHAN5G(228, 0), }; static struct ieee80211_channel b43_5ghz_aphy_chantable[] = { CHAN5G(34, 0), CHAN5G(36, 0), CHAN5G(38, 0), CHAN5G(40, 0), CHAN5G(42, 0), CHAN5G(44, 0), CHAN5G(46, 0), CHAN5G(48, 0), CHAN5G(52, 0), CHAN5G(56, 0), CHAN5G(60, 0), CHAN5G(64, 0), CHAN5G(100, 0), CHAN5G(104, 0), CHAN5G(108, 0), CHAN5G(112, 0), CHAN5G(116, 0), CHAN5G(120, 0), CHAN5G(124, 0), CHAN5G(128, 0), CHAN5G(132, 0), CHAN5G(136, 0), CHAN5G(140, 0), CHAN5G(149, 0), CHAN5G(153, 0), CHAN5G(157, 0), CHAN5G(161, 0), CHAN5G(165, 0), CHAN5G(184, 0), CHAN5G(188, 0), CHAN5G(192, 0), CHAN5G(196, 0), CHAN5G(200, 0), CHAN5G(204, 0), CHAN5G(208, 0), CHAN5G(212, 0), CHAN5G(216, 0), }; #undef CHAN5G static struct ieee80211_supported_band b43_band_5GHz_nphy = { .band = IEEE80211_BAND_5GHZ, .channels = b43_5ghz_nphy_chantable, .n_channels = ARRAY_SIZE(b43_5ghz_nphy_chantable), .bitrates = b43_a_ratetable, .n_bitrates = b43_a_ratetable_size, }; static struct ieee80211_supported_band b43_band_5GHz_aphy = { .band = IEEE80211_BAND_5GHZ, .channels = b43_5ghz_aphy_chantable, .n_channels = ARRAY_SIZE(b43_5ghz_aphy_chantable), .bitrates = b43_a_ratetable, .n_bitrates = b43_a_ratetable_size, }; static struct ieee80211_supported_band b43_band_2GHz = { .band = IEEE80211_BAND_2GHZ, .channels = b43_2ghz_chantable, .n_channels = ARRAY_SIZE(b43_2ghz_chantable), .bitrates = b43_g_ratetable, .n_bitrates = b43_g_ratetable_size, }; static void b43_wireless_core_exit(struct b43_wldev *dev); static int b43_wireless_core_init(struct b43_wldev *dev); static void b43_wireless_core_stop(struct b43_wldev *dev); static int b43_wireless_core_start(struct b43_wldev *dev); static int b43_ratelimit(struct b43_wl *wl) { if (!wl || !wl->current_dev) return 1; if (b43_status(wl->current_dev) < B43_STAT_STARTED) return 1; /* We are up and running. * Ratelimit the messages to avoid DoS over the net. */ return net_ratelimit(); } void b43info(struct b43_wl *wl, const char *fmt, ...) { va_list args; if (!b43_ratelimit(wl)) return; va_start(args, fmt); printk(KERN_INFO "b43-%s: ", (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); vprintk(fmt, args); va_end(args); } void b43err(struct b43_wl *wl, const char *fmt, ...) { va_list args; if (!b43_ratelimit(wl)) return; va_start(args, fmt); printk(KERN_ERR "b43-%s ERROR: ", (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); vprintk(fmt, args); va_end(args); } void b43warn(struct b43_wl *wl, const char *fmt, ...) { va_list args; if (!b43_ratelimit(wl)) return; va_start(args, fmt); printk(KERN_WARNING "b43-%s warning: ", (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); vprintk(fmt, args); va_end(args); } #if B43_DEBUG void b43dbg(struct b43_wl *wl, const char *fmt, ...) { va_list args; va_start(args, fmt); printk(KERN_DEBUG "b43-%s debug: ", (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); vprintk(fmt, args); va_end(args); } #endif /* DEBUG */ static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val) { u32 macctl; B43_WARN_ON(offset % 4 != 0); macctl = b43_read32(dev, B43_MMIO_MACCTL); if (macctl & B43_MACCTL_BE) val = swab32(val); b43_write32(dev, B43_MMIO_RAM_CONTROL, offset); mmiowb(); b43_write32(dev, B43_MMIO_RAM_DATA, val); } static inline void b43_shm_control_word(struct b43_wldev *dev, u16 routing, u16 offset) { u32 control; /* "offset" is the WORD offset. */ control = routing; control <<= 16; control |= offset; b43_write32(dev, B43_MMIO_SHM_CONTROL, control); } u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { u32 ret; if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); ret <<= 16; b43_shm_control_word(dev, routing, (offset >> 2) + 1); ret |= b43_read16(dev, B43_MMIO_SHM_DATA); goto out; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); ret = b43_read32(dev, B43_MMIO_SHM_DATA); out: return ret; } u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; u32 ret; spin_lock_irqsave(&wl->shm_lock, flags); ret = __b43_shm_read32(dev, routing, offset); spin_unlock_irqrestore(&wl->shm_lock, flags); return ret; } u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) { u16 ret; if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); goto out; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); ret = b43_read16(dev, B43_MMIO_SHM_DATA); out: return ret; } u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; u16 ret; spin_lock_irqsave(&wl->shm_lock, flags); ret = __b43_shm_read16(dev, routing, offset); spin_unlock_irqrestore(&wl->shm_lock, flags); return ret; } void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) { if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, (value >> 16) & 0xffff); b43_shm_control_word(dev, routing, (offset >> 2) + 1); b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write32(dev, B43_MMIO_SHM_DATA, value); } void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) { struct b43_wl *wl = dev->wl; unsigned long flags; spin_lock_irqsave(&wl->shm_lock, flags); __b43_shm_write32(dev, routing, offset, value); spin_unlock_irqrestore(&wl->shm_lock, flags); } void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) { if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write16(dev, B43_MMIO_SHM_DATA, value); } void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) { struct b43_wl *wl = dev->wl; unsigned long flags; spin_lock_irqsave(&wl->shm_lock, flags); __b43_shm_write16(dev, routing, offset, value); spin_unlock_irqrestore(&wl->shm_lock, flags); } /* Read HostFlags */ u64 b43_hf_read(struct b43_wldev * dev) { u64 ret; ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI); ret <<= 16; ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI); ret <<= 16; ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO); return ret; } /* Write HostFlags */ void b43_hf_write(struct b43_wldev *dev, u64 value) { u16 lo, mi, hi; lo = (value & 0x00000000FFFFULL); mi = (value & 0x0000FFFF0000ULL) >> 16; hi = (value & 0xFFFF00000000ULL) >> 32; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); } void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) { u32 low, high; B43_WARN_ON(dev->dev->id.revision < 3); /* The hardware guarantees us an atomic read, if we * read the low register first. */ low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); *tsf = high; *tsf <<= 32; *tsf |= low; } static void b43_time_lock(struct b43_wldev *dev) { u32 macctl; macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl |= B43_MACCTL_TBTTHOLD; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit the write */ b43_read32(dev, B43_MMIO_MACCTL); } static void b43_time_unlock(struct b43_wldev *dev) { u32 macctl; macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_TBTTHOLD; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit the write */ b43_read32(dev, B43_MMIO_MACCTL); } static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) { u32 low, high; B43_WARN_ON(dev->dev->id.revision < 3); low = tsf; high = (tsf >> 32); /* The hardware guarantees us an atomic write, if we * write the low register first. */ b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low); mmiowb(); b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high); mmiowb(); } void b43_tsf_write(struct b43_wldev *dev, u64 tsf) { b43_time_lock(dev); b43_tsf_write_locked(dev, tsf); b43_time_unlock(dev); } static void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac) { static const u8 zero_addr[ETH_ALEN] = { 0 }; u16 data; if (!mac) mac = zero_addr; offset |= 0x0020; b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset); data = mac[0]; data |= mac[1] << 8; b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); data = mac[2]; data |= mac[3] << 8; b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); data = mac[4]; data |= mac[5] << 8; b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); } static void b43_write_mac_bssid_templates(struct b43_wldev *dev) { const u8 *mac; const u8 *bssid; u8 mac_bssid[ETH_ALEN * 2]; int i; u32 tmp; bssid = dev->wl->bssid; mac = dev->wl->mac_addr; b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid); memcpy(mac_bssid, mac, ETH_ALEN); memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); /* Write our MAC address and BSSID to template ram */ for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) { tmp = (u32) (mac_bssid[i + 0]); tmp |= (u32) (mac_bssid[i + 1]) << 8; tmp |= (u32) (mac_bssid[i + 2]) << 16; tmp |= (u32) (mac_bssid[i + 3]) << 24; b43_ram_write(dev, 0x20 + i, tmp); } } static void b43_upload_card_macaddress(struct b43_wldev *dev) { b43_write_mac_bssid_templates(dev); b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr); } static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) { /* slot_time is in usec. */ if (dev->phy.type != B43_PHYTYPE_G) return; b43_write16(dev, 0x684, 510 + slot_time); b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); } static void b43_short_slot_timing_enable(struct b43_wldev *dev) { b43_set_slot_time(dev, 9); } static void b43_short_slot_timing_disable(struct b43_wldev *dev) { b43_set_slot_time(dev, 20); } /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. * Returns the _previously_ enabled IRQ mask. */ static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask) { u32 old_mask; old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask); return old_mask; } /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. * Returns the _previously_ enabled IRQ mask. */ static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask) { u32 old_mask; old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask); return old_mask; } /* Synchronize IRQ top- and bottom-half. * IRQs must be masked before calling this. * This must not be called with the irq_lock held. */ static void b43_synchronize_irq(struct b43_wldev *dev) { synchronize_irq(dev->dev->irq); tasklet_kill(&dev->isr_tasklet); } /* DummyTransmission function, as documented on * http://bcm-specs.sipsolutions.net/DummyTransmission */ void b43_dummy_transmission(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_phy *phy = &dev->phy; unsigned int i, max_loop; u16 value; u32 buffer[5] = { 0x00000000, 0x00D40000, 0x00000000, 0x01000000, 0x00000000, }; switch (phy->type) { case B43_PHYTYPE_A: max_loop = 0x1E; buffer[0] = 0x000201CC; break; case B43_PHYTYPE_B: case B43_PHYTYPE_G: max_loop = 0xFA; buffer[0] = 0x000B846E; break; default: B43_WARN_ON(1); return; } spin_lock_irq(&wl->irq_lock); write_lock(&wl->tx_lock); for (i = 0; i < 5; i++) b43_ram_write(dev, i * 4, buffer[i]); /* Commit writes */ b43_read32(dev, B43_MMIO_MACCTL); b43_write16(dev, 0x0568, 0x0000); b43_write16(dev, 0x07C0, 0x0000); value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0); b43_write16(dev, 0x050C, value); b43_write16(dev, 0x0508, 0x0000); b43_write16(dev, 0x050A, 0x0000); b43_write16(dev, 0x054C, 0x0000); b43_write16(dev, 0x056A, 0x0014); b43_write16(dev, 0x0568, 0x0826); b43_write16(dev, 0x0500, 0x0000); b43_write16(dev, 0x0502, 0x0030); if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) b43_radio_write16(dev, 0x0051, 0x0017); for (i = 0x00; i < max_loop; i++) { value = b43_read16(dev, 0x050E); if (value & 0x0080) break; udelay(10); } for (i = 0x00; i < 0x0A; i++) { value = b43_read16(dev, 0x050E); if (value & 0x0400) break; udelay(10); } for (i = 0x00; i < 0x19; i++) { value = b43_read16(dev, 0x0690); if (!(value & 0x0100)) break; udelay(10); } if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) b43_radio_write16(dev, 0x0051, 0x0037); write_unlock(&wl->tx_lock); spin_unlock_irq(&wl->irq_lock); } static void key_write(struct b43_wldev *dev, u8 index, u8 algorithm, const u8 * key) { unsigned int i; u32 offset; u16 value; u16 kidx; /* Key index/algo block */ kidx = b43_kidx_to_fw(dev, index); value = ((kidx << 4) | algorithm); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value); /* Write the key to the Key Table Pointer offset */ offset = dev->ktp + (index * B43_SEC_KEYSIZE); for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { value = key[i]; value |= (u16) (key[i + 1]) << 8; b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value); } } static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr) { u32 addrtmp[2] = { 0, 0, }; u8 per_sta_keys_start = 8; if (b43_new_kidx_api(dev)) per_sta_keys_start = 4; B43_WARN_ON(index < per_sta_keys_start); /* We have two default TX keys and possibly two default RX keys. * Physical mac 0 is mapped to physical key 4 or 8, depending * on the firmware version. * So we must adjust the index here. */ index -= per_sta_keys_start; if (addr) { addrtmp[0] = addr[0]; addrtmp[0] |= ((u32) (addr[1]) << 8); addrtmp[0] |= ((u32) (addr[2]) << 16); addrtmp[0] |= ((u32) (addr[3]) << 24); addrtmp[1] = addr[4]; addrtmp[1] |= ((u32) (addr[5]) << 8); } if (dev->dev->id.revision >= 5) { /* Receive match transmitter address mechanism */ b43_shm_write32(dev, B43_SHM_RCMTA, (index * 2) + 0, addrtmp[0]); b43_shm_write16(dev, B43_SHM_RCMTA, (index * 2) + 1, addrtmp[1]); } else { /* RXE (Receive Engine) and * PSM (Programmable State Machine) mechanism */ if (index < 8) { /* TODO write to RCM 16, 19, 22 and 25 */ } else { b43_shm_write32(dev, B43_SHM_SHARED, B43_SHM_SH_PSM + (index * 6) + 0, addrtmp[0]); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PSM + (index * 6) + 4, addrtmp[1]); } } } static void do_key_write(struct b43_wldev *dev, u8 index, u8 algorithm, const u8 * key, size_t key_len, const u8 * mac_addr) { u8 buf[B43_SEC_KEYSIZE] = { 0, }; u8 per_sta_keys_start = 8; if (b43_new_kidx_api(dev)) per_sta_keys_start = 4; B43_WARN_ON(index >= dev->max_nr_keys); B43_WARN_ON(key_len > B43_SEC_KEYSIZE); if (index >= per_sta_keys_start) keymac_write(dev, index, NULL); /* First zero out mac. */ if (key) memcpy(buf, key, key_len); key_write(dev, index, algorithm, buf); if (index >= per_sta_keys_start) keymac_write(dev, index, mac_addr); dev->key[index].algorithm = algorithm; } static int b43_key_write(struct b43_wldev *dev, int index, u8 algorithm, const u8 * key, size_t key_len, const u8 * mac_addr, struct ieee80211_key_conf *keyconf) { int i; int sta_keys_start; if (key_len > B43_SEC_KEYSIZE) return -EINVAL; for (i = 0; i < dev->max_nr_keys; i++) { /* Check that we don't already have this key. */ B43_WARN_ON(dev->key[i].keyconf == keyconf); } if (index < 0) { /* Pairwise key. Get an empty slot for the key. */ if (b43_new_kidx_api(dev)) sta_keys_start = 4; else sta_keys_start = 8; for (i = sta_keys_start; i < dev->max_nr_keys; i++) { if (!dev->key[i].keyconf) { /* found empty */ index = i; break; } } if (index < 0) { b43warn(dev->wl, "Out of hardware key memory\n"); return -ENOSPC; } } else B43_WARN_ON(index > 3); do_key_write(dev, index, algorithm, key, key_len, mac_addr); if ((index <= 3) && !b43_new_kidx_api(dev)) { /* Default RX key */ B43_WARN_ON(mac_addr); do_key_write(dev, index + 4, algorithm, key, key_len, NULL); } keyconf->hw_key_idx = index; dev->key[index].keyconf = keyconf; return 0; } static int b43_key_clear(struct b43_wldev *dev, int index) { if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys))) return -EINVAL; do_key_write(dev, index, B43_SEC_ALGO_NONE, NULL, B43_SEC_KEYSIZE, NULL); if ((index <= 3) && !b43_new_kidx_api(dev)) { do_key_write(dev, index + 4, B43_SEC_ALGO_NONE, NULL, B43_SEC_KEYSIZE, NULL); } dev->key[index].keyconf = NULL; return 0; } static void b43_clear_keys(struct b43_wldev *dev) { int i; for (i = 0; i < dev->max_nr_keys; i++) b43_key_clear(dev, i); } static void b43_dump_keymemory(struct b43_wldev *dev) { unsigned int i, index, offset; DECLARE_MAC_BUF(macbuf); u8 mac[ETH_ALEN]; u16 algo; u32 rcmta0; u16 rcmta1; u64 hf; struct b43_key *key; if (!b43_debug(dev, B43_DBG_KEYS)) return; hf = b43_hf_read(dev); b43dbg(dev->wl, "Hardware key memory dump: USEDEFKEYS=%u\n", !!(hf & B43_HF_USEDEFKEYS)); for (index = 0; index < dev->max_nr_keys; index++) { key = &(dev->key[index]); printk(KERN_DEBUG "Key slot %02u: %s", index, (key->keyconf == NULL) ? " " : "*"); offset = dev->ktp + (index * B43_SEC_KEYSIZE); for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i); printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); } algo = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KEYIDXBLOCK + (index * 2)); printk(" Algo: %04X/%02X", algo, key->algorithm); if (index >= 4) { rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA, ((index - 4) * 2) + 0); rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA, ((index - 4) * 2) + 1); *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0); *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1); printk(" MAC: %s", print_mac(macbuf, mac)); } else printk(" DEFAULT KEY"); printk("\n"); } } void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) { u32 macctl; u16 ucstat; bool hwps; bool awake; int i; B43_WARN_ON((ps_flags & B43_PS_ENABLED) && (ps_flags & B43_PS_DISABLED)); B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP)); if (ps_flags & B43_PS_ENABLED) { hwps = 1; } else if (ps_flags & B43_PS_DISABLED) { hwps = 0; } else { //TODO: If powersave is not off and FIXME is not set and we are not in adhoc // and thus is not an AP and we are associated, set bit 25 } if (ps_flags & B43_PS_AWAKE) { awake = 1; } else if (ps_flags & B43_PS_ASLEEP) { awake = 0; } else { //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, // or we are associated, or FIXME, or the latest PS-Poll packet sent was // successful, set bit26 } /* FIXME: For now we force awake-on and hwps-off */ hwps = 0; awake = 1; macctl = b43_read32(dev, B43_MMIO_MACCTL); if (hwps) macctl |= B43_MACCTL_HWPS; else macctl &= ~B43_MACCTL_HWPS; if (awake) macctl |= B43_MACCTL_AWAKE; else macctl &= ~B43_MACCTL_AWAKE; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit write */ b43_read32(dev, B43_MMIO_MACCTL); if (awake && dev->dev->id.revision >= 5) { /* Wait for the microcode to wake up. */ for (i = 0; i < 100; i++) { ucstat = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODESTAT); if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP) break; udelay(10); } } } void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) { u32 tmslow; u32 macctl; flags |= B43_TMSLOW_PHYCLKEN; flags |= B43_TMSLOW_PHYRESET; ssb_device_enable(dev->dev, flags); msleep(2); /* Wait for the PLL to turn on. */ /* Now take the PHY out of Reset again */ tmslow = ssb_read32(dev->dev, SSB_TMSLOW); tmslow |= SSB_TMSLOW_FGC; tmslow &= ~B43_TMSLOW_PHYRESET; ssb_write32(dev->dev, SSB_TMSLOW, tmslow); ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ msleep(1); tmslow &= ~SSB_TMSLOW_FGC; ssb_write32(dev->dev, SSB_TMSLOW, tmslow); ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ msleep(1); /* Turn Analog ON, but only if we already know the PHY-type. * This protects against very early setup where we don't know the * PHY-type, yet. wireless_core_reset will be called once again later, * when we know the PHY-type. */ if (dev->phy.ops) dev->phy.ops->switch_analog(dev, 1); macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; if (flags & B43_TMSLOW_GMODE) macctl |= B43_MACCTL_GMODE; macctl |= B43_MACCTL_IHR_ENABLED; b43_write32(dev, B43_MMIO_MACCTL, macctl); } static void handle_irq_transmit_status(struct b43_wldev *dev) { u32 v0, v1; u16 tmp; struct b43_txstatus stat; while (1) { v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0); if (!(v0 & 0x00000001)) break; v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1); stat.cookie = (v0 >> 16); stat.seq = (v1 & 0x0000FFFF); stat.phy_stat = ((v1 & 0x00FF0000) >> 16); tmp = (v0 & 0x0000FFFF); stat.frame_count = ((tmp & 0xF000) >> 12); stat.rts_count = ((tmp & 0x0F00) >> 8); stat.supp_reason = ((tmp & 0x001C) >> 2); stat.pm_indicated = !!(tmp & 0x0080); stat.intermediate = !!(tmp & 0x0040); stat.for_ampdu = !!(tmp & 0x0020); stat.acked = !!(tmp & 0x0002); b43_handle_txstatus(dev, &stat); } } static void drain_txstatus_queue(struct b43_wldev *dev) { u32 dummy; if (dev->dev->id.revision < 5) return; /* Read all entries from the microcode TXstatus FIFO * and throw them away. */ while (1) { dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0); if (!(dummy & 0x00000001)) break; dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1); } } static u32 b43_jssi_read(struct b43_wldev *dev) { u32 val = 0; val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A); val <<= 16; val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088); return val; } static void b43_jssi_write(struct b43_wldev *dev, u32 jssi) { b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF)); b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16); } static void b43_generate_noise_sample(struct b43_wldev *dev) { b43_jssi_write(dev, 0x7F7F7F7F); b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); } static void b43_calculate_link_quality(struct b43_wldev *dev) { /* Top half of Link Quality calculation. */ if (dev->phy.type != B43_PHYTYPE_G) return; if (dev->noisecalc.calculation_running) return; dev->noisecalc.calculation_running = 1; dev->noisecalc.nr_samples = 0; b43_generate_noise_sample(dev); } static void handle_irq_noise(struct b43_wldev *dev) { struct b43_phy_g *phy = dev->phy.g; u16 tmp; u8 noise[4]; u8 i, j; s32 average; /* Bottom half of Link Quality calculation. */ if (dev->phy.type != B43_PHYTYPE_G) return; /* Possible race condition: It might be possible that the user * changed to a different channel in the meantime since we * started the calculation. We ignore that fact, since it's * not really that much of a problem. The background noise is * an estimation only anyway. Slightly wrong results will get damped * by the averaging of the 8 sample rounds. Additionally the * value is shortlived. So it will be replaced by the next noise * calculation round soon. */ B43_WARN_ON(!dev->noisecalc.calculation_running); *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); if (noise[0] == 0x7F || noise[1] == 0x7F || noise[2] == 0x7F || noise[3] == 0x7F) goto generate_new; /* Get the noise samples. */ B43_WARN_ON(dev->noisecalc.nr_samples >= 8); i = dev->noisecalc.nr_samples; noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]]; dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]]; dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]]; dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]]; dev->noisecalc.nr_samples++; if (dev->noisecalc.nr_samples == 8) { /* Calculate the Link Quality by the noise samples. */ average = 0; for (i = 0; i < 8; i++) { for (j = 0; j < 4; j++) average += dev->noisecalc.samples[i][j]; } average /= (8 * 4); average *= 125; average += 64; average /= 128; tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C); tmp = (tmp / 128) & 0x1F; if (tmp >= 8) average += 2; else average -= 25; if (tmp == 8) average -= 72; else average -= 48; dev->stats.link_noise = average; dev->noisecalc.calculation_running = 0; return; } generate_new: b43_generate_noise_sample(dev); } static void handle_irq_tbtt_indication(struct b43_wldev *dev) { if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { ///TODO: PS TBTT } else { if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) b43_power_saving_ctl_bits(dev, 0); } if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) dev->dfq_valid = 1; } static void handle_irq_atim_end(struct b43_wldev *dev) { if (dev->dfq_valid) { b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_DFQ_VALID); dev->dfq_valid = 0; } } static void handle_irq_pmq(struct b43_wldev *dev) { u32 tmp; //TODO: AP mode. while (1) { tmp = b43_read32(dev, B43_MMIO_PS_STATUS); if (!(tmp & 0x00000008)) break; } /* 16bit write is odd, but correct. */ b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002); } static void b43_write_template_common(struct b43_wldev *dev, const u8 * data, u16 size, u16 ram_offset, u16 shm_size_offset, u8 rate) { u32 i, tmp; struct b43_plcp_hdr4 plcp; plcp.data = 0; b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data)); ram_offset += sizeof(u32); /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet. * So leave the first two bytes of the next write blank. */ tmp = (u32) (data[0]) << 16; tmp |= (u32) (data[1]) << 24; b43_ram_write(dev, ram_offset, tmp); ram_offset += sizeof(u32); for (i = 2; i < size; i += sizeof(u32)) { tmp = (u32) (data[i + 0]); if (i + 1 < size) tmp |= (u32) (data[i + 1]) << 8; if (i + 2 < size) tmp |= (u32) (data[i + 2]) << 16; if (i + 3 < size) tmp |= (u32) (data[i + 3]) << 24; b43_ram_write(dev, ram_offset + i - 2, tmp); } b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset, size + sizeof(struct b43_plcp_hdr6)); } /* Check if the use of the antenna that ieee80211 told us to * use is possible. This will fall back to DEFAULT. * "antenna_nr" is the antenna identifier we got from ieee80211. */ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, u8 antenna_nr) { u8 antenna_mask; if (antenna_nr == 0) { /* Zero means "use default antenna". That's always OK. */ return 0; } /* Get the mask of available antennas. */ if (dev->phy.gmode) antenna_mask = dev->dev->bus->sprom.ant_available_bg; else antenna_mask = dev->dev->bus->sprom.ant_available_a; if (!(antenna_mask & (1 << (antenna_nr - 1)))) { /* This antenna is not available. Fall back to default. */ return 0; } return antenna_nr; } /* Convert a b43 antenna number value to the PHY TX control value. */ static u16 b43_antenna_to_phyctl(int antenna) { switch (antenna) { case B43_ANTENNA0: return B43_TXH_PHY_ANT0; case B43_ANTENNA1: return B43_TXH_PHY_ANT1; case B43_ANTENNA2: return B43_TXH_PHY_ANT2; case B43_ANTENNA3: return B43_TXH_PHY_ANT3; case B43_ANTENNA_AUTO: return B43_TXH_PHY_ANT01AUTO; } B43_WARN_ON(1); return 0; } static void b43_write_beacon_template(struct b43_wldev *dev, u16 ram_offset, u16 shm_size_offset) { unsigned int i, len, variable_len; const struct ieee80211_mgmt *bcn; const u8 *ie; bool tim_found = 0; unsigned int rate; u16 ctl; int antenna; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon); bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); len = min((size_t) dev->wl->current_beacon->len, 0x200 - sizeof(struct b43_plcp_hdr6)); rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value; b43_write_template_common(dev, (const u8 *)bcn, len, ram_offset, shm_size_offset, rate); /* Write the PHY TX control parameters. */ antenna = B43_ANTENNA_DEFAULT; antenna = b43_antenna_to_phyctl(antenna); ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); /* We can't send beacons with short preamble. Would get PHY errors. */ ctl &= ~B43_TXH_PHY_SHORTPRMBL; ctl &= ~B43_TXH_PHY_ANT; ctl &= ~B43_TXH_PHY_ENC; ctl |= antenna; if (b43_is_cck_rate(rate)) ctl |= B43_TXH_PHY_ENC_CCK; else ctl |= B43_TXH_PHY_ENC_OFDM; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); /* Find the position of the TIM and the DTIM_period value * and write them to SHM. */ ie = bcn->u.beacon.variable; variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable); for (i = 0; i < variable_len - 2; ) { uint8_t ie_id, ie_len; ie_id = ie[i]; ie_len = ie[i + 1]; if (ie_id == 5) { u16 tim_position; u16 dtim_period; /* This is the TIM Information Element */ /* Check whether the ie_len is in the beacon data range. */ if (variable_len < ie_len + 2 + i) break; /* A valid TIM is at least 4 bytes long. */ if (ie_len < 4) break; tim_found = 1; tim_position = sizeof(struct b43_plcp_hdr6); tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable); tim_position += i; dtim_period = ie[i + 3]; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_TIMBPOS, tim_position); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_DTIMPER, dtim_period); break; } i += ie_len + 2; } if (!tim_found) { /* * If ucode wants to modify TIM do it behind the beacon, this * will happen, for example, when doing mesh networking. */ b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_TIMBPOS, len + sizeof(struct b43_plcp_hdr6)); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_DTIMPER, 0); } b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset); } static void b43_write_probe_resp_plcp(struct b43_wldev *dev, u16 shm_offset, u16 size, struct ieee80211_rate *rate) { struct b43_plcp_hdr4 plcp; u32 tmp; __le16 dur; plcp.data = 0; b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); dur = ieee80211_generic_frame_duration(dev->wl->hw, dev->wl->vif, size, rate); /* Write PLCP in two parts and timing for packet transfer */ tmp = le32_to_cpu(plcp.data); b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16); b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur)); } /* Instead of using custom probe response template, this function * just patches custom beacon template by: * 1) Changing packet type * 2) Patching duration field * 3) Stripping TIM */ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev, u16 *dest_size, struct ieee80211_rate *rate) { const u8 *src_data; u8 *dest_data; u16 src_size, elem_size, src_pos, dest_pos; __le16 dur; struct ieee80211_hdr *hdr; size_t ie_start; src_size = dev->wl->current_beacon->len; src_data = (const u8 *)dev->wl->current_beacon->data; /* Get the start offset of the variable IEs in the packet. */ ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable)); if (B43_WARN_ON(src_size < ie_start)) return NULL; dest_data = kmalloc(src_size, GFP_ATOMIC); if (unlikely(!dest_data)) return NULL; /* Copy the static data and all Information Elements, except the TIM. */ memcpy(dest_data, src_data, ie_start); src_pos = ie_start; dest_pos = ie_start; for ( ; src_pos < src_size - 2; src_pos += elem_size) { elem_size = src_data[src_pos + 1] + 2; if (src_data[src_pos] == 5) { /* This is the TIM. */ continue; } memcpy(dest_data + dest_pos, src_data + src_pos, elem_size); dest_pos += elem_size; } *dest_size = dest_pos; hdr = (struct ieee80211_hdr *)dest_data; /* Set the frame control. */ hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); dur = ieee80211_generic_frame_duration(dev->wl->hw, dev->wl->vif, *dest_size, rate); hdr->duration_id = dur; return dest_data; } static void b43_write_probe_resp_template(struct b43_wldev *dev, u16 ram_offset, u16 shm_size_offset, struct ieee80211_rate *rate) { const u8 *probe_resp_data; u16 size; size = dev->wl->current_beacon->len; probe_resp_data = b43_generate_probe_resp(dev, &size, rate); if (unlikely(!probe_resp_data)) return; /* Looks like PLCP headers plus packet timings are stored for * all possible basic rates */ b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]); b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]); b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]); b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]); size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); b43_write_template_common(dev, probe_resp_data, size, ram_offset, shm_size_offset, rate->hw_value); kfree(probe_resp_data); } static void b43_upload_beacon0(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; if (wl->beacon0_uploaded) return; b43_write_beacon_template(dev, 0x68, 0x18); /* FIXME: Probe resp upload doesn't really belong here, * but we don't use that feature anyway. */ b43_write_probe_resp_template(dev, 0x268, 0x4A, &__b43_ratetable[3]); wl->beacon0_uploaded = 1; } static void b43_upload_beacon1(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; if (wl->beacon1_uploaded) return; b43_write_beacon_template(dev, 0x468, 0x1A); wl->beacon1_uploaded = 1; } static void handle_irq_beacon(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; u32 cmd, beacon0_valid, beacon1_valid; if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) return; /* This is the bottom half of the asynchronous beacon update. */ /* Ignore interrupt in the future. */ dev->irq_savedstate &= ~B43_IRQ_BEACON; cmd = b43_read32(dev, B43_MMIO_MACCMD); beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID); beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID); /* Schedule interrupt manually, if busy. */ if (beacon0_valid && beacon1_valid) { b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON); dev->irq_savedstate |= B43_IRQ_BEACON; return; } if (unlikely(wl->beacon_templates_virgin)) { /* We never uploaded a beacon before. * Upload both templates now, but only mark one valid. */ wl->beacon_templates_virgin = 0; b43_upload_beacon0(dev); b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON0_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); } else { if (!beacon0_valid) { b43_upload_beacon0(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON0_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); } else if (!beacon1_valid) { b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON1_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); } } } static void b43_beacon_update_trigger_work(struct work_struct *work) { struct b43_wl *wl = container_of(work, struct b43_wl, beacon_update_trigger); struct b43_wldev *dev; mutex_lock(&wl->mutex); dev = wl->current_dev; if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { spin_lock_irq(&wl->irq_lock); /* update beacon right away or defer to irq */ dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); handle_irq_beacon(dev); /* The handler might have updated the IRQ mask. */ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_savedstate); mmiowb(); spin_unlock_irq(&wl->irq_lock); } mutex_unlock(&wl->mutex); } /* Asynchronously update the packet templates in template RAM. * Locking: Requires wl->irq_lock to be locked. */ static void b43_update_templates(struct b43_wl *wl) { struct sk_buff *beacon; /* This is the top half of the ansynchronous beacon update. * The bottom half is the beacon IRQ. * Beacon update must be asynchronous to avoid sending an * invalid beacon. This can happen for example, if the firmware * transmits a beacon while we are updating it. */ /* We could modify the existing beacon and set the aid bit in * the TIM field, but that would probably require resizing and * moving of data within the beacon template. * Simply request a new beacon and let mac80211 do the hard work. */ beacon = ieee80211_beacon_get(wl->hw, wl->vif); if (unlikely(!beacon)) return; if (wl->current_beacon) dev_kfree_skb_any(wl->current_beacon); wl->current_beacon = beacon; wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; queue_work(wl->hw->workqueue, &wl->beacon_update_trigger); } static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) { b43_time_lock(dev); if (dev->dev->id.revision >= 3) { b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16)); b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10)); } else { b43_write16(dev, 0x606, (beacon_int >> 6)); b43_write16(dev, 0x610, beacon_int); } b43_time_unlock(dev); b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int); } static void b43_handle_firmware_panic(struct b43_wldev *dev) { u16 reason; /* Read the register that contains the reason code for the panic. */ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG); b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason); switch (reason) { default: b43dbg(dev->wl, "The panic reason is unknown.\n"); /* fallthrough */ case B43_FWPANIC_DIE: /* Do not restart the controller or firmware. * The device is nonfunctional from now on. * Restarting would result in this panic to trigger again, * so we avoid that recursion. */ break; case B43_FWPANIC_RESTART: b43_controller_restart(dev, "Microcode panic"); break; } } static void handle_irq_ucode_debug(struct b43_wldev *dev) { unsigned int i, cnt; u16 reason, marker_id, marker_line; __le16 *buf; /* The proprietary firmware doesn't have this IRQ. */ if (!dev->fw.opensource) return; /* Read the register that contains the reason code for this IRQ. */ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG); switch (reason) { case B43_DEBUGIRQ_PANIC: b43_handle_firmware_panic(dev); break; case B43_DEBUGIRQ_DUMP_SHM: if (!B43_DEBUG) break; /* Only with driver debugging enabled. */ buf = kmalloc(4096, GFP_ATOMIC); if (!buf) { b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n"); goto out; } for (i = 0; i < 4096; i += 2) { u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i); buf[i / 2] = cpu_to_le16(tmp); } b43info(dev->wl, "Shared memory dump:\n"); print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 2, buf, 4096, 1); kfree(buf); break; case B43_DEBUGIRQ_DUMP_REGS: if (!B43_DEBUG) break; /* Only with driver debugging enabled. */ b43info(dev->wl, "Microcode register dump:\n"); for (i = 0, cnt = 0; i < 64; i++) { u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i); if (cnt == 0) printk(KERN_INFO); printk("r%02u: 0x%04X ", i, tmp); cnt++; if (cnt == 6) { printk("\n"); cnt = 0; } } printk("\n"); break; case B43_DEBUGIRQ_MARKER: if (!B43_DEBUG) break; /* Only with driver debugging enabled. */ marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_MARKER_ID_REG); marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_MARKER_LINE_REG); b43info(dev->wl, "The firmware just executed the MARKER(%u) " "at line number %u\n", marker_id, marker_line); break; default: b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n", reason); } out: /* Acknowledge the debug-IRQ, so the firmware can continue. */ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK); } /* Interrupt handler bottom-half */ static void b43_interrupt_tasklet(struct b43_wldev *dev) { u32 reason; u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; u32 merged_dma_reason = 0; int i; unsigned long flags; spin_lock_irqsave(&dev->wl->irq_lock, flags); B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED); reason = dev->irq_reason; for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { dma_reason[i] = dev->dma_reason[i]; merged_dma_reason |= dma_reason[i]; } if (unlikely(reason & B43_IRQ_MAC_TXERR)) b43err(dev->wl, "MAC transmission error\n"); if (unlikely(reason & B43_IRQ_PHY_TXERR)) { b43err(dev->wl, "PHY transmission error\n"); rmb(); if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) { atomic_set(&dev->phy.txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); b43err(dev->wl, "Too many PHY TX errors, " "restarting the controller\n"); b43_controller_restart(dev, "PHY TX errors"); } } if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | B43_DMAIRQ_NONFATALMASK))) { if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { b43err(dev->wl, "Fatal DMA error: " "0x%08X, 0x%08X, 0x%08X, " "0x%08X, 0x%08X, 0x%08X\n", dma_reason[0], dma_reason[1], dma_reason[2], dma_reason[3], dma_reason[4], dma_reason[5]); b43_controller_restart(dev, "DMA error"); mmiowb(); spin_unlock_irqrestore(&dev->wl->irq_lock, flags); return; } if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { b43err(dev->wl, "DMA error: " "0x%08X, 0x%08X, 0x%08X, " "0x%08X, 0x%08X, 0x%08X\n", dma_reason[0], dma_reason[1], dma_reason[2], dma_reason[3], dma_reason[4], dma_reason[5]); } } if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) handle_irq_ucode_debug(dev); if (reason & B43_IRQ_TBTT_INDI) handle_irq_tbtt_indication(dev); if (reason & B43_IRQ_ATIM_END) handle_irq_atim_end(dev); if (reason & B43_IRQ_BEACON) handle_irq_beacon(dev); if (reason & B43_IRQ_PMQ) handle_irq_pmq(dev); if (reason & B43_IRQ_TXFIFO_FLUSH_OK) ;/* TODO */ if (reason & B43_IRQ_NOISESAMPLE_OK) handle_irq_noise(dev); /* Check the DMA reason registers for received data. */ if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { if (b43_using_pio_transfers(dev)) b43_pio_rx(dev->pio.rx_queue); else b43_dma_rx(dev->dma.rx_ring); } B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE); B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE); B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE); B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE); B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE); if (reason & B43_IRQ_TX_OK) handle_irq_transmit_status(dev); b43_interrupt_enable(dev, dev->irq_savedstate); mmiowb(); spin_unlock_irqrestore(&dev->wl->irq_lock, flags); } static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason) { b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); } /* Interrupt handler top-half */ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) { irqreturn_t ret = IRQ_NONE; struct b43_wldev *dev = dev_id; u32 reason; if (!dev) return IRQ_NONE; spin_lock(&dev->wl->irq_lock); if (b43_status(dev) < B43_STAT_STARTED) goto out; reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); if (reason == 0xffffffff) /* shared IRQ */ goto out; ret = IRQ_HANDLED; reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); if (!reason) goto out; dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) & 0x0001DC00; dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) & 0x0000DC00; dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) & 0x0000DC00; dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON) & 0x0001DC00; dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON) & 0x0000DC00; dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON) & 0x0000DC00; b43_interrupt_ack(dev, reason); /* disable all IRQs. They are enabled again in the bottom half. */ dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); /* save the reason code and call our bottom half. */ dev->irq_reason = reason; tasklet_schedule(&dev->isr_tasklet); out: mmiowb(); spin_unlock(&dev->wl->irq_lock); return ret; } static void do_release_fw(struct b43_firmware_file *fw) { release_firmware(fw->data); fw->data = NULL; fw->filename = NULL; } static void b43_release_firmware(struct b43_wldev *dev) { do_release_fw(&dev->fw.ucode); do_release_fw(&dev->fw.pcm); do_release_fw(&dev->fw.initvals); do_release_fw(&dev->fw.initvals_band); } static void b43_print_fw_helptext(struct b43_wl *wl, bool error) { const char *text; text = "You must go to " "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " "and download the correct firmware for this driver version. " "Please carefully read all instructions on this website.\n"; if (error) b43err(wl, text); else b43warn(wl, text); } static int do_request_fw(struct b43_wldev *dev, const char *name, struct b43_firmware_file *fw, bool silent) { char path[sizeof(modparam_fwpostfix) + 32]; const struct firmware *blob; struct b43_fw_header *hdr; u32 size; int err; if (!name) { /* Don't fetch anything. Free possibly cached firmware. */ do_release_fw(fw); return 0; } if (fw->filename) { if (strcmp(fw->filename, name) == 0) return 0; /* Already have this fw. */ /* Free the cached firmware first. */ do_release_fw(fw); } snprintf(path, ARRAY_SIZE(path), "b43%s/%s.fw", modparam_fwpostfix, name); err = request_firmware(&blob, path, dev->dev->dev); if (err == -ENOENT) { if (!silent) { b43err(dev->wl, "Firmware file \"%s\" not found\n", path); } return err; } else if (err) { b43err(dev->wl, "Firmware file \"%s\" request failed (err=%d)\n", path, err); return err; } if (blob->size < sizeof(struct b43_fw_header)) goto err_format; hdr = (struct b43_fw_header *)(blob->data); switch (hdr->type) { case B43_FW_TYPE_UCODE: case B43_FW_TYPE_PCM: size = be32_to_cpu(hdr->size); if (size != blob->size - sizeof(struct b43_fw_header)) goto err_format; /* fallthrough */ case B43_FW_TYPE_IV: if (hdr->ver != 1) goto err_format; break; default: goto err_format; } fw->data = blob; fw->filename = name; return 0; err_format: b43err(dev->wl, "Firmware file \"%s\" format error.\n", path); release_firmware(blob); return -EPROTO; } static int b43_request_firmware(struct b43_wldev *dev) { struct b43_firmware *fw = &dev->fw; const u8 rev = dev->dev->id.revision; const char *filename; u32 tmshigh; int err; /* Get microcode */ tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); if ((rev >= 5) && (rev <= 10)) filename = "ucode5"; else if ((rev >= 11) && (rev <= 12)) filename = "ucode11"; else if (rev >= 13) filename = "ucode13"; else goto err_no_ucode; err = do_request_fw(dev, filename, &fw->ucode, 0); if (err) goto err_load; /* Get PCM code */ if ((rev >= 5) && (rev <= 10)) filename = "pcm5"; else if (rev >= 11) filename = NULL; else goto err_no_pcm; fw->pcm_request_failed = 0; err = do_request_fw(dev, filename, &fw->pcm, 1); if (err == -ENOENT) { /* We did not find a PCM file? Not fatal, but * core rev <= 10 must do without hwcrypto then. */ fw->pcm_request_failed = 1; } else if (err) goto err_load; /* Get initvals */ switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1initvals5"; else filename = "a0g0initvals5"; } else goto err_no_initvals; break; case B43_PHYTYPE_G: if ((rev >= 5) && (rev <= 10)) filename = "b0g0initvals5"; else if (rev >= 13) filename = "b0g0initvals13"; else goto err_no_initvals; break; case B43_PHYTYPE_N: if ((rev >= 11) && (rev <= 12)) filename = "n0initvals11"; else goto err_no_initvals; break; default: goto err_no_initvals; } err = do_request_fw(dev, filename, &fw->initvals, 0); if (err) goto err_load; /* Get bandswitch initvals */ switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1bsinitvals5"; else filename = "a0g0bsinitvals5"; } else if (rev >= 11) filename = NULL; else goto err_no_initvals; break; case B43_PHYTYPE_G: if ((rev >= 5) && (rev <= 10)) filename = "b0g0bsinitvals5"; else if (rev >= 11) filename = NULL; else goto err_no_initvals; break; case B43_PHYTYPE_N: if ((rev >= 11) && (rev <= 12)) filename = "n0bsinitvals11"; else goto err_no_initvals; break; default: goto err_no_initvals; } err = do_request_fw(dev, filename, &fw->initvals_band, 0); if (err) goto err_load; return 0; err_load: b43_print_fw_helptext(dev->wl, 1); goto error; err_no_ucode: err = -ENODEV; b43err(dev->wl, "No microcode available for core rev %u\n", rev); goto error; err_no_pcm: err = -ENODEV; b43err(dev->wl, "No PCM available for core rev %u\n", rev); goto error; err_no_initvals: err = -ENODEV; b43err(dev->wl, "No Initial Values firmware file for PHY %u, " "core rev %u\n", dev->phy.type, rev); goto error; error: b43_release_firmware(dev); return err; } static int b43_upload_microcode(struct b43_wldev *dev) { const size_t hdr_len = sizeof(struct b43_fw_header); const __be32 *data; unsigned int i, len; u16 fwrev, fwpatch, fwdate, fwtime; u32 tmp, macctl; int err = 0; /* Jump the microcode PSM to offset 0 */ macctl = b43_read32(dev, B43_MMIO_MACCTL); B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN); macctl |= B43_MACCTL_PSM_JMP0; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Zero out all microcode PSM registers and shared memory. */ for (i = 0; i < 64; i++) b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0); for (i = 0; i < 4096; i += 2) b43_shm_write16(dev, B43_SHM_SHARED, i, 0); /* Upload Microcode. */ data = (__be32 *) (dev->fw.ucode.data->data + hdr_len); len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32); b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000); for (i = 0; i < len; i++) { b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); udelay(10); } if (dev->fw.pcm.data) { /* Upload PCM data. */ data = (__be32 *) (dev->fw.pcm.data->data + hdr_len); len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32); b43_shm_control_word(dev, B43_SHM_HW, 0x01EA); b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000); /* No need for autoinc bit in SHM_HW */ b43_shm_control_word(dev, B43_SHM_HW, 0x01EB); for (i = 0; i < len; i++) { b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); udelay(10); } } b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); /* Start the microcode PSM */ macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_PSM_JMP0; macctl |= B43_MACCTL_PSM_RUN; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Wait for the microcode to load and respond */ i = 0; while (1) { tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); if (tmp == B43_IRQ_MAC_SUSPENDED) break; i++; if (i >= 20) { b43err(dev->wl, "Microcode not responding\n"); b43_print_fw_helptext(dev->wl, 1); err = -ENODEV; goto error; } msleep_interruptible(50); if (signal_pending(current)) { err = -EINTR; goto error; } } b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); /* dummy read */ /* Get and check the revisions. */ fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV); fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH); fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE); fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME); if (fwrev <= 0x128) { b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from " "binary drivers older than version 4.x is unsupported. " "You must upgrade your firmware files.\n"); b43_print_fw_helptext(dev->wl, 1); err = -EOPNOTSUPP; goto error; } dev->fw.rev = fwrev; dev->fw.patch = fwpatch; dev->fw.opensource = (fwdate == 0xFFFF); if (dev->fw.opensource) { /* Patchlevel info is encoded in the "time" field. */ dev->fw.patch = fwtime; b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", dev->fw.rev, dev->fw.patch, dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); } else { b43info(dev->wl, "Loading firmware version %u.%u " "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch, (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF, (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F); if (dev->fw.pcm_request_failed) { b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. " "Hardware accelerated cryptography is disabled.\n"); b43_print_fw_helptext(dev->wl, 0); } } if (b43_is_old_txhdr_format(dev)) { /* We're over the deadline, but we keep support for old fw * until it turns out to be in major conflict with something new. */ b43warn(dev->wl, "You are using an old firmware image. " "Support for old firmware will be removed soon " "(official deadline was July 2008).\n"); b43_print_fw_helptext(dev->wl, 0); } return 0; error: macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_PSM_RUN; macctl |= B43_MACCTL_PSM_JMP0; b43_write32(dev, B43_MMIO_MACCTL, macctl); return err; } static int b43_write_initvals(struct b43_wldev *dev, const struct b43_iv *ivals, size_t count, size_t array_size) { const struct b43_iv *iv; u16 offset; size_t i; bool bit32; BUILD_BUG_ON(sizeof(struct b43_iv) != 6); iv = ivals; for (i = 0; i < count; i++) { if (array_size < sizeof(iv->offset_size)) goto err_format; array_size -= sizeof(iv->offset_size); offset = be16_to_cpu(iv->offset_size); bit32 = !!(offset & B43_IV_32BIT); offset &= B43_IV_OFFSET_MASK; if (offset >= 0x1000) goto err_format; if (bit32) { u32 value; if (array_size < sizeof(iv->data.d32)) goto err_format; array_size -= sizeof(iv->data.d32); value = get_unaligned_be32(&iv->data.d32); b43_write32(dev, offset, value); iv = (const struct b43_iv *)((const uint8_t *)iv + sizeof(__be16) + sizeof(__be32)); } else { u16 value; if (array_size < sizeof(iv->data.d16)) goto err_format; array_size -= sizeof(iv->data.d16); value = be16_to_cpu(iv->data.d16); b43_write16(dev, offset, value); iv = (const struct b43_iv *)((const uint8_t *)iv + sizeof(__be16) + sizeof(__be16)); } } if (array_size) goto err_format; return 0; err_format: b43err(dev->wl, "Initial Values Firmware file-format error.\n"); b43_print_fw_helptext(dev->wl, 1); return -EPROTO; } static int b43_upload_initvals(struct b43_wldev *dev) { const size_t hdr_len = sizeof(struct b43_fw_header); const struct b43_fw_header *hdr; struct b43_firmware *fw = &dev->fw; const struct b43_iv *ivals; size_t count; int err; hdr = (const struct b43_fw_header *)(fw->initvals.data->data); ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len); count = be32_to_cpu(hdr->size); err = b43_write_initvals(dev, ivals, count, fw->initvals.data->size - hdr_len); if (err) goto out; if (fw->initvals_band.data) { hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data); ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len); count = be32_to_cpu(hdr->size); err = b43_write_initvals(dev, ivals, count, fw->initvals_band.data->size - hdr_len); if (err) goto out; } out: return err; } /* Initialize the GPIOs * http://bcm-specs.sipsolutions.net/GPIO */ static int b43_gpio_init(struct b43_wldev *dev) { struct ssb_bus *bus = dev->dev->bus; struct ssb_device *gpiodev, *pcidev = NULL; u32 mask, set; b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) & ~B43_MACCTL_GPOUTSMSK); b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x000F); mask = 0x0000001F; set = 0x0000000F; if (dev->dev->bus->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; } if (0 /* FIXME: conditional unknown */ ) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0100); mask |= 0x0180; set |= 0x0180; } if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } if (dev->dev->id.revision >= 2) mask |= 0x0010; /* FIXME: This is redundant. */ #ifdef CONFIG_SSB_DRIVER_PCICORE pcidev = bus->pcicore.dev; #endif gpiodev = bus->chipco.dev ? : pcidev; if (!gpiodev) return 0; ssb_write32(gpiodev, B43_GPIO_CONTROL, (ssb_read32(gpiodev, B43_GPIO_CONTROL) & mask) | set); return 0; } /* Turn off all GPIO stuff. Call this on module unload, for example. */ static void b43_gpio_cleanup(struct b43_wldev *dev) { struct ssb_bus *bus = dev->dev->bus; struct ssb_device *gpiodev, *pcidev = NULL; #ifdef CONFIG_SSB_DRIVER_PCICORE pcidev = bus->pcicore.dev; #endif gpiodev = bus->chipco.dev ? : pcidev; if (!gpiodev) return; ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); } /* http://bcm-specs.sipsolutions.net/EnableMac */ void b43_mac_enable(struct b43_wldev *dev) { if (b43_debug(dev, B43_DBG_FIRMWARE)) { u16 fwstate; fwstate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODESTAT); if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) && (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) { b43err(dev->wl, "b43_mac_enable(): The firmware " "should be suspended, but current state is %u\n", fwstate); } } dev->mac_suspended--; B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) | B43_MACCTL_ENABLED); b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_MAC_SUSPENDED); /* Commit writes */ b43_read32(dev, B43_MMIO_MACCTL); b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); b43_power_saving_ctl_bits(dev, 0); } } /* http://bcm-specs.sipsolutions.net/SuspendMAC */ void b43_mac_suspend(struct b43_wldev *dev) { int i; u32 tmp; might_sleep(); B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) & ~B43_MACCTL_ENABLED); /* force pci to flush the write */ b43_read32(dev, B43_MMIO_MACCTL); for (i = 35; i; i--) { tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); if (tmp & B43_IRQ_MAC_SUSPENDED) goto out; udelay(10); } /* Hm, it seems this will take some time. Use msleep(). */ for (i = 40; i; i--) { tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); if (tmp & B43_IRQ_MAC_SUSPENDED) goto out; msleep(1); } b43err(dev->wl, "MAC suspend failed\n"); } out: dev->mac_suspended++; } static void b43_adjust_opmode(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; u32 ctl; u16 cfp_pretbtt; ctl = b43_read32(dev, B43_MMIO_MACCTL); /* Reset status to STA infrastructure mode. */ ctl &= ~B43_MACCTL_AP; ctl &= ~B43_MACCTL_KEEP_CTL; ctl &= ~B43_MACCTL_KEEP_BADPLCP; ctl &= ~B43_MACCTL_KEEP_BAD; ctl &= ~B43_MACCTL_PROMISC; ctl &= ~B43_MACCTL_BEACPROMISC; ctl |= B43_MACCTL_INFRA; if (b43_is_mode(wl, NL80211_IFTYPE_AP) || b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) ctl |= B43_MACCTL_AP; else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) ctl &= ~B43_MACCTL_INFRA; if (wl->filter_flags & FIF_CONTROL) ctl |= B43_MACCTL_KEEP_CTL; if (wl->filter_flags & FIF_FCSFAIL) ctl |= B43_MACCTL_KEEP_BAD; if (wl->filter_flags & FIF_PLCPFAIL) ctl |= B43_MACCTL_KEEP_BADPLCP; if (wl->filter_flags & FIF_PROMISC_IN_BSS) ctl |= B43_MACCTL_PROMISC; if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC) ctl |= B43_MACCTL_BEACPROMISC; /* Workaround: On old hardware the HW-MAC-address-filter * doesn't work properly, so always run promisc in filter * it in software. */ if (dev->dev->id.revision <= 4) ctl |= B43_MACCTL_PROMISC; b43_write32(dev, B43_MMIO_MACCTL, ctl); cfp_pretbtt = 2; if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { if (dev->dev->bus->chip_id == 0x4306 && dev->dev->bus->chip_rev == 3) cfp_pretbtt = 100; else cfp_pretbtt = 50; } b43_write16(dev, 0x612, cfp_pretbtt); } static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) { u16 offset; if (is_ofdm) { offset = 0x480; offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; } else { offset = 0x4C0; offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2; } b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20, b43_shm_read16(dev, B43_SHM_SHARED, offset)); } static void b43_rate_memory_init(struct b43_wldev *dev) { switch (dev->phy.type) { case B43_PHYTYPE_A: case B43_PHYTYPE_G: case B43_PHYTYPE_N: b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1); if (dev->phy.type == B43_PHYTYPE_A) break; /* fallthrough */ case B43_PHYTYPE_B: b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0); b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0); b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0); b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0); break; default: B43_WARN_ON(1); } } /* Set the default values for the PHY TX Control Words. */ static void b43_set_phytxctl_defaults(struct b43_wldev *dev) { u16 ctl = 0; ctl |= B43_TXH_PHY_ENC_CCK; ctl |= B43_TXH_PHY_ANT01AUTO; ctl |= B43_TXH_PHY_TXPWR; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl); } /* Set the TX-Antenna for management frames sent by firmware. */ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) { u16 ant; u16 tmp; ant = b43_antenna_to_phyctl(antenna); /* For ACK/CTS */ tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL); tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp); /* For Probe Resposes */ tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL); tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp); } /* This is the opposite of b43_chip_init() */ static void b43_chip_exit(struct b43_wldev *dev) { b43_phy_exit(dev); b43_gpio_cleanup(dev); /* firmware is released later */ } /* Initialize the chip * http://bcm-specs.sipsolutions.net/ChipInit */ static int b43_chip_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; int err; u32 value32, macctl; u16 value16; /* Initialize the MAC control */ macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED; if (dev->phy.gmode) macctl |= B43_MACCTL_GMODE; macctl |= B43_MACCTL_INFRA; b43_write32(dev, B43_MMIO_MACCTL, macctl); err = b43_request_firmware(dev); if (err) goto out; err = b43_upload_microcode(dev); if (err) goto out; /* firmware is released later */ err = b43_gpio_init(dev); if (err) goto out; /* firmware is released later */ err = b43_upload_initvals(dev); if (err) goto err_gpio_clean; /* Turn the Analog on and initialize the PHY. */ phy->ops->switch_analog(dev, 1); err = b43_phy_init(dev); if (err) goto err_gpio_clean; /* Disable Interference Mitigation. */ if (phy->ops->interf_mitigation) phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); /* Select the antennae */ if (phy->ops->set_rx_antenna) phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); if (phy->type == B43_PHYTYPE_B) { value16 = b43_read16(dev, 0x005E); value16 |= 0x0004; b43_write16(dev, 0x005E, value16); } b43_write32(dev, 0x0100, 0x01000000); if (dev->dev->id.revision < 5) b43_write32(dev, 0x010C, 0x01000000); b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) & ~B43_MACCTL_INFRA); b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) | B43_MACCTL_INFRA); /* Probe Response Timeout value */ /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000); /* Initially set the wireless operation mode. */ b43_adjust_opmode(dev); if (dev->dev->id.revision < 3) { b43_write16(dev, 0x060E, 0x0000); b43_write16(dev, 0x0610, 0x8000); b43_write16(dev, 0x0604, 0x0000); b43_write16(dev, 0x0606, 0x0200); } else { b43_write32(dev, 0x0188, 0x80000000); b43_write32(dev, 0x018C, 0x02000000); } b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00); value32 = ssb_read32(dev->dev, SSB_TMSLOW); value32 |= 0x00100000; ssb_write32(dev->dev, SSB_TMSLOW, value32); b43_write16(dev, B43_MMIO_POWERUP_DELAY, dev->dev->bus->chipco.fast_pwrup_delay); err = 0; b43dbg(dev->wl, "Chip initialized\n"); out: return err; err_gpio_clean: b43_gpio_cleanup(dev); return err; } static void b43_periodic_every60sec(struct b43_wldev *dev) { const struct b43_phy_operations *ops = dev->phy.ops; if (ops->pwork_60sec) ops->pwork_60sec(dev); /* Force check the TX power emission now. */ b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) { /* Update device statistics. */ b43_calculate_link_quality(dev); } static void b43_periodic_every15sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; u16 wdr; if (dev->fw.opensource) { /* Check if the firmware is still alive. * It will reset the watchdog counter to 0 in its idle loop. */ wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG); if (unlikely(wdr)) { b43err(dev->wl, "Firmware watchdog: The firmware died!\n"); b43_controller_restart(dev, "Firmware watchdog"); return; } else { b43_shm_write16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG, 1); } } if (phy->ops->pwork_15sec) phy->ops->pwork_15sec(dev); atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); } static void do_periodic_work(struct b43_wldev *dev) { unsigned int state; state = dev->periodic_state; if (state % 4 == 0) b43_periodic_every60sec(dev); if (state % 2 == 0) b43_periodic_every30sec(dev); b43_periodic_every15sec(dev); } /* Periodic work locking policy: * The whole periodic work handler is protected by * wl->mutex. If another lock is needed somewhere in the * pwork callchain, it's aquired in-place, where it's needed. */ static void b43_periodic_work_handler(struct work_struct *work) { struct b43_wldev *dev = container_of(work, struct b43_wldev, periodic_work.work); struct b43_wl *wl = dev->wl; unsigned long delay; mutex_lock(&wl->mutex); if (unlikely(b43_status(dev) != B43_STAT_STARTED)) goto out; if (b43_debug(dev, B43_DBG_PWORK_STOP)) goto out_requeue; do_periodic_work(dev); dev->periodic_state++; out_requeue: if (b43_debug(dev, B43_DBG_PWORK_FAST)) delay = msecs_to_jiffies(50); else delay = round_jiffies_relative(HZ * 15); queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay); out: mutex_unlock(&wl->mutex); } static void b43_periodic_tasks_setup(struct b43_wldev *dev) { struct delayed_work *work = &dev->periodic_work; dev->periodic_state = 0; INIT_DELAYED_WORK(work, b43_periodic_work_handler); queue_delayed_work(dev->wl->hw->workqueue, work, 0); } /* Check if communication with the device works correctly. */ static int b43_validate_chipaccess(struct b43_wldev *dev) { u32 v, backup; backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); /* Check for read/write and endianness problems. */ b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55) goto error; b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) goto error; b43_shm_write32(dev, B43_SHM_SHARED, 0, backup); if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) { /* The 32bit register shadows the two 16bit registers * with update sideeffects. Validate this. */ b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB); if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB) goto error; if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC) goto error; } b43_write32(dev, B43_MMIO_TSF_CFP_START, 0); v = b43_read32(dev, B43_MMIO_MACCTL); v |= B43_MACCTL_GMODE; if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) goto error; return 0; error: b43err(dev->wl, "Failed to validate the chipaccess\n"); return -ENODEV; } static void b43_security_init(struct b43_wldev *dev) { dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP); /* KTP is a word address, but we address SHM bytewise. * So multiply by two. */ dev->ktp *= 2; if (dev->dev->id.revision >= 5) { /* Number of RCMTA address slots */ b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8); } b43_clear_keys(dev); } static int b43_rng_read(struct hwrng *rng, u32 * data) { struct b43_wl *wl = (struct b43_wl *)rng->priv; unsigned long flags; /* Don't take wl->mutex here, as it could deadlock with * hwrng internal locking. It's not needed to take * wl->mutex here, anyway. */ spin_lock_irqsave(&wl->irq_lock, flags); *data = b43_read16(wl->current_dev, B43_MMIO_RNG); spin_unlock_irqrestore(&wl->irq_lock, flags); return (sizeof(u16)); } static void b43_rng_exit(struct b43_wl *wl) { if (wl->rng_initialized) hwrng_unregister(&wl->rng); } static int b43_rng_init(struct b43_wl *wl) { int err; snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); wl->rng.name = wl->rng_name; wl->rng.data_read = b43_rng_read; wl->rng.priv = (unsigned long)wl; wl->rng_initialized = 1; err = hwrng_register(&wl->rng); if (err) { wl->rng_initialized = 0; b43err(wl, "Failed to register the random " "number generator (%d)\n", err); } return err; } static int b43_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; unsigned long flags; int err; if (unlikely(skb->len < 2 + 2 + 6)) { /* Too short, this can't be a valid frame. */ goto drop_packet; } B43_WARN_ON(skb_shinfo(skb)->nr_frags); if (unlikely(!dev)) goto drop_packet; /* Transmissions on seperate queues can run concurrently. */ read_lock_irqsave(&wl->tx_lock, flags); err = -ENODEV; if (likely(b43_status(dev) >= B43_STAT_STARTED)) { if (b43_using_pio_transfers(dev)) err = b43_pio_tx(dev, skb); else err = b43_dma_tx(dev, skb); } read_unlock_irqrestore(&wl->tx_lock, flags); if (unlikely(err)) goto drop_packet; return NETDEV_TX_OK; drop_packet: /* We can not transmit this packet. Drop it. */ dev_kfree_skb_any(skb); return NETDEV_TX_OK; } /* Locking: wl->irq_lock */ static void b43_qos_params_upload(struct b43_wldev *dev, const struct ieee80211_tx_queue_params *p, u16 shm_offset) { u16 params[B43_NR_QOSPARAMS]; int bslots, tmp; unsigned int i; bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min; memset(¶ms, 0, sizeof(params)); params[B43_QOSPARAM_TXOP] = p->txop * 32; params[B43_QOSPARAM_CWMIN] = p->cw_min; params[B43_QOSPARAM_CWMAX] = p->cw_max; params[B43_QOSPARAM_CWCUR] = p->cw_min; params[B43_QOSPARAM_AIFS] = p->aifs; params[B43_QOSPARAM_BSLOTS] = bslots; params[B43_QOSPARAM_REGGAP] = bslots + p->aifs; for (i = 0; i < ARRAY_SIZE(params); i++) { if (i == B43_QOSPARAM_STATUS) { tmp = b43_shm_read16(dev, B43_SHM_SHARED, shm_offset + (i * 2)); /* Mark the parameters as updated. */ tmp |= 0x100; b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + (i * 2), tmp); } else { b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + (i * 2), params[i]); } } } /* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ static const u16 b43_qos_shm_offsets[] = { /* [mac80211-queue-nr] = SHM_OFFSET, */ [0] = B43_QOS_VOICE, [1] = B43_QOS_VIDEO, [2] = B43_QOS_BESTEFFORT, [3] = B43_QOS_BACKGROUND, }; /* Update all QOS parameters in hardware. */ static void b43_qos_upload_all(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_qos_params *params; unsigned int i; BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); b43_mac_suspend(dev); for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); b43_qos_params_upload(dev, &(params->p), b43_qos_shm_offsets[i]); } b43_mac_enable(dev); } static void b43_qos_clear(struct b43_wl *wl) { struct b43_qos_params *params; unsigned int i; /* Initialize QoS parameters to sane defaults. */ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); switch (b43_qos_shm_offsets[i]) { case B43_QOS_VOICE: params->p.txop = 0; params->p.aifs = 2; params->p.cw_min = 0x0001; params->p.cw_max = 0x0001; break; case B43_QOS_VIDEO: params->p.txop = 0; params->p.aifs = 2; params->p.cw_min = 0x0001; params->p.cw_max = 0x0001; break; case B43_QOS_BESTEFFORT: params->p.txop = 0; params->p.aifs = 3; params->p.cw_min = 0x0001; params->p.cw_max = 0x03FF; break; case B43_QOS_BACKGROUND: params->p.txop = 0; params->p.aifs = 7; params->p.cw_min = 0x0001; params->p.cw_max = 0x03FF; break; default: B43_WARN_ON(1); } } } /* Initialize the core's QOS capabilities */ static void b43_qos_init(struct b43_wldev *dev) { /* Upload the current QOS parameters. */ b43_qos_upload_all(dev); /* Enable QOS support. */ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); b43_write16(dev, B43_MMIO_IFSCTL, b43_read16(dev, B43_MMIO_IFSCTL) | B43_MMIO_IFSCTL_USE_EDCF); } static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, const struct ieee80211_tx_queue_params *params) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; unsigned int queue = (unsigned int)_queue; int err = -ENODEV; if (queue >= ARRAY_SIZE(wl->qos_params)) { /* Queue not available or don't support setting * params on this queue. Return success to not * confuse mac80211. */ return 0; } BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); mutex_lock(&wl->mutex); dev = wl->current_dev; if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) goto out_unlock; memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); b43_mac_suspend(dev); b43_qos_params_upload(dev, &(wl->qos_params[queue].p), b43_qos_shm_offsets[queue]); b43_mac_enable(dev); err = 0; out_unlock: mutex_unlock(&wl->mutex); return err; } static int b43_op_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; unsigned long flags; int err = -ENODEV; if (!dev) goto out; spin_lock_irqsave(&wl->irq_lock, flags); if (likely(b43_status(dev) >= B43_STAT_STARTED)) { if (b43_using_pio_transfers(dev)) b43_pio_get_tx_stats(dev, stats); else b43_dma_get_tx_stats(dev, stats); err = 0; } spin_unlock_irqrestore(&wl->irq_lock, flags); out: return err; } static int b43_op_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { struct b43_wl *wl = hw_to_b43_wl(hw); unsigned long flags; spin_lock_irqsave(&wl->irq_lock, flags); memcpy(stats, &wl->ieee_stats, sizeof(*stats)); spin_unlock_irqrestore(&wl->irq_lock, flags); return 0; } static void b43_put_phy_into_reset(struct b43_wldev *dev) { struct ssb_device *sdev = dev->dev; u32 tmslow; tmslow = ssb_read32(sdev, SSB_TMSLOW); tmslow &= ~B43_TMSLOW_GMODE; tmslow |= B43_TMSLOW_PHYRESET; tmslow |= SSB_TMSLOW_FGC; ssb_write32(sdev, SSB_TMSLOW, tmslow); msleep(1); tmslow = ssb_read32(sdev, SSB_TMSLOW); tmslow &= ~SSB_TMSLOW_FGC; tmslow |= B43_TMSLOW_PHYRESET; ssb_write32(sdev, SSB_TMSLOW, tmslow); msleep(1); } static const char * band_to_string(enum ieee80211_band band) { switch (band) { case IEEE80211_BAND_5GHZ: return "5"; case IEEE80211_BAND_2GHZ: return "2.4"; default: break; } B43_WARN_ON(1); return ""; } /* Expects wl->mutex locked */ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan) { struct b43_wldev *up_dev = NULL; struct b43_wldev *down_dev; struct b43_wldev *d; int err; bool uninitialized_var(gmode); int prev_status; /* Find a device and PHY which supports the band. */ list_for_each_entry(d, &wl->devlist, list) { switch (chan->band) { case IEEE80211_BAND_5GHZ: if (d->phy.supports_5ghz) { up_dev = d; gmode = 0; } break; case IEEE80211_BAND_2GHZ: if (d->phy.supports_2ghz) { up_dev = d; gmode = 1; } break; default: B43_WARN_ON(1); return -EINVAL; } if (up_dev) break; } if (!up_dev) { b43err(wl, "Could not find a device for %s-GHz band operation\n", band_to_string(chan->band)); return -ENODEV; } if ((up_dev == wl->current_dev) && (!!wl->current_dev->phy.gmode == !!gmode)) { /* This device is already running. */ return 0; } b43dbg(wl, "Switching to %s-GHz band\n", band_to_string(chan->band)); down_dev = wl->current_dev; prev_status = b43_status(down_dev); /* Shutdown the currently running core. */ if (prev_status >= B43_STAT_STARTED) b43_wireless_core_stop(down_dev); if (prev_status >= B43_STAT_INITIALIZED) b43_wireless_core_exit(down_dev); if (down_dev != up_dev) { /* We switch to a different core, so we put PHY into * RESET on the old core. */ b43_put_phy_into_reset(down_dev); } /* Now start the new core. */ up_dev->phy.gmode = gmode; if (prev_status >= B43_STAT_INITIALIZED) { err = b43_wireless_core_init(up_dev); if (err) { b43err(wl, "Fatal: Could not initialize device for " "selected %s-GHz band\n", band_to_string(chan->band)); goto init_failure; } } if (prev_status >= B43_STAT_STARTED) { err = b43_wireless_core_start(up_dev); if (err) { b43err(wl, "Fatal: Coult not start device for " "selected %s-GHz band\n", band_to_string(chan->band)); b43_wireless_core_exit(up_dev); goto init_failure; } } B43_WARN_ON(b43_status(up_dev) != prev_status); wl->current_dev = up_dev; return 0; init_failure: /* Whoops, failed to init the new core. No core is operating now. */ wl->current_dev = NULL; return err; } /* Write the short and long frame retry limit values. */ static void b43_set_retry_limits(struct b43_wldev *dev, unsigned int short_retry, unsigned int long_retry) { /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing * the chip-internal counter. */ short_retry = min(short_retry, (unsigned int)0xF); long_retry = min(long_retry, (unsigned int)0xF); b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, short_retry); b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, long_retry); } static int b43_op_config(struct ieee80211_hw *hw, u32 changed) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; struct b43_phy *phy; struct ieee80211_conf *conf = &hw->conf; unsigned long flags; int antenna; int err = 0; mutex_lock(&wl->mutex); /* Switch the band (if necessary). This might change the active core. */ err = b43_switch_band(wl, conf->channel); if (err) goto out_unlock_mutex; dev = wl->current_dev; phy = &dev->phy; b43_mac_suspend(dev); if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) b43_set_retry_limits(dev, conf->short_frame_max_tx_count, conf->long_frame_max_tx_count); changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS; if (!changed) goto out_mac_enable; /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ if (conf->channel->hw_value != phy->channel) b43_switch_channel(dev, conf->channel->hw_value); dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); /* Adjust the desired TX power level. */ if (conf->power_level != 0) { spin_lock_irqsave(&wl->irq_lock, flags); if (conf->power_level != phy->desired_txpower) { phy->desired_txpower = conf->power_level; b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | B43_TXPWR_IGNORE_TSSI); } spin_unlock_irqrestore(&wl->irq_lock, flags); } /* Antennas for RX and management frame TX. */ antenna = B43_ANTENNA_DEFAULT; b43_mgmtframe_txantenna(dev, antenna); antenna = B43_ANTENNA_DEFAULT; if (phy->ops->set_rx_antenna) phy->ops->set_rx_antenna(dev, antenna); /* Update templates for AP/mesh mode. */ if (b43_is_mode(wl, NL80211_IFTYPE_AP) || b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) b43_set_beacon_int(dev, conf->beacon_int); if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " "still turns the radio physically off. " "Press the button to turn it on.\n"); } } else { b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); b43info(dev->wl, "Radio turned off by software\n"); } } out_mac_enable: b43_mac_enable(dev); out_unlock_mutex: mutex_unlock(&wl->mutex); return err; } static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates) { struct ieee80211_supported_band *sband = dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)]; struct ieee80211_rate *rate; int i; u16 basic, direct, offset, basic_offset, rateptr; for (i = 0; i < sband->n_bitrates; i++) { rate = &sband->bitrates[i]; if (b43_is_cck_rate(rate->hw_value)) { direct = B43_SHM_SH_CCKDIRECT; basic = B43_SHM_SH_CCKBASIC; offset = b43_plcp_get_ratecode_cck(rate->hw_value); offset &= 0xF; } else { direct = B43_SHM_SH_OFDMDIRECT; basic = B43_SHM_SH_OFDMBASIC; offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); offset &= 0xF; } rate = ieee80211_get_response_rate(sband, brates, rate->bitrate); if (b43_is_cck_rate(rate->hw_value)) { basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value); basic_offset &= 0xF; } else { basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); basic_offset &= 0xF; } /* * Get the pointer that we need to point to * from the direct map */ rateptr = b43_shm_read16(dev, B43_SHM_SHARED, direct + 2 * basic_offset); /* and write it to the basic map */ b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset, rateptr); } } static void b43_op_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *conf, u32 changed) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; mutex_lock(&wl->mutex); dev = wl->current_dev; if (!dev || b43_status(dev) < B43_STAT_STARTED) goto out_unlock_mutex; b43_mac_suspend(dev); if (changed & BSS_CHANGED_BASIC_RATES) b43_update_basic_rates(dev, conf->basic_rates); if (changed & BSS_CHANGED_ERP_SLOT) { if (conf->use_short_slot) b43_short_slot_timing_enable(dev); else b43_short_slot_timing_disable(dev); } b43_mac_enable(dev); out_unlock_mutex: mutex_unlock(&wl->mutex); return; } static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; u8 algorithm; u8 index; int err; #if B43_DEBUG static const u8 bcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; #endif if (modparam_nohwcrypt) return -ENOSPC; /* User disabled HW-crypto */ mutex_lock(&wl->mutex); spin_lock_irq(&wl->irq_lock); write_lock(&wl->tx_lock); /* Why do we need all this locking here? * mutex -> Every config operation must take it. * irq_lock -> We modify the dev->key array, which is accessed * in the IRQ handlers. * tx_lock -> We modify the dev->key array, which is accessed * in the TX handler. */ dev = wl->current_dev; err = -ENODEV; if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; if (dev->fw.pcm_request_failed) { /* We don't have firmware for the crypto engine. * Must use software-crypto. */ err = -EOPNOTSUPP; goto out_unlock; } err = -EINVAL; switch (key->alg) { case ALG_WEP: if (key->keylen == LEN_WEP40) algorithm = B43_SEC_ALGO_WEP40; else algorithm = B43_SEC_ALGO_WEP104; break; case ALG_TKIP: algorithm = B43_SEC_ALGO_TKIP; break; case ALG_CCMP: algorithm = B43_SEC_ALGO_AES; break; default: B43_WARN_ON(1); goto out_unlock; } index = (u8) (key->keyidx); if (index > 3) goto out_unlock; switch (cmd) { case SET_KEY: if (algorithm == B43_SEC_ALGO_TKIP) { /* FIXME: No TKIP hardware encryption for now. */ err = -EOPNOTSUPP; goto out_unlock; } if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { if (WARN_ON(!sta)) { err = -EOPNOTSUPP; goto out_unlock; } /* Pairwise key with an assigned MAC address. */ err = b43_key_write(dev, -1, algorithm, key->key, key->keylen, sta->addr, key); } else { /* Group key */ err = b43_key_write(dev, index, algorithm, key->key, key->keylen, NULL, key); } if (err) goto out_unlock; if (algorithm == B43_SEC_ALGO_WEP40 || algorithm == B43_SEC_ALGO_WEP104) { b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS); } else { b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_USEDEFKEYS); } key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; break; case DISABLE_KEY: { err = b43_key_clear(dev, key->hw_key_idx); if (err) goto out_unlock; break; } default: B43_WARN_ON(1); } out_unlock: if (!err) { b43dbg(wl, "%s hardware based encryption for keyidx: %d, " "mac: %pM\n", cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, sta ? sta->addr : bcast_addr); b43_dump_keymemory(dev); } write_unlock(&wl->tx_lock); spin_unlock_irq(&wl->irq_lock); mutex_unlock(&wl->mutex); return err; } static void b43_op_configure_filter(struct ieee80211_hw *hw, unsigned int changed, unsigned int *fflags, int mc_count, struct dev_addr_list *mc_list) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; unsigned long flags; if (!dev) { *fflags = 0; return; } spin_lock_irqsave(&wl->irq_lock, flags); *fflags &= FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC; changed &= FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC; wl->filter_flags = *fflags; if (changed && b43_status(dev) >= B43_STAT_INITIALIZED) b43_adjust_opmode(dev); spin_unlock_irqrestore(&wl->irq_lock, flags); } static int b43_op_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; unsigned long flags; if (!dev) return -ENODEV; mutex_lock(&wl->mutex); spin_lock_irqsave(&wl->irq_lock, flags); B43_WARN_ON(wl->vif != vif); if (conf->bssid) memcpy(wl->bssid, conf->bssid, ETH_ALEN); else memset(wl->bssid, 0, ETH_ALEN); if (b43_status(dev) >= B43_STAT_INITIALIZED) { if (b43_is_mode(wl, NL80211_IFTYPE_AP) || b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { B43_WARN_ON(vif->type != wl->if_type); if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); } b43_write_mac_bssid_templates(dev); } spin_unlock_irqrestore(&wl->irq_lock, flags); mutex_unlock(&wl->mutex); return 0; } /* Locking: wl->mutex */ static void b43_wireless_core_stop(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; unsigned long flags; if (b43_status(dev) < B43_STAT_STARTED) return; /* Disable and sync interrupts. We must do this before than * setting the status to INITIALIZED, as the interrupt handler * won't care about IRQs then. */ spin_lock_irqsave(&wl->irq_lock, flags); dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ spin_unlock_irqrestore(&wl->irq_lock, flags); b43_synchronize_irq(dev); write_lock_irqsave(&wl->tx_lock, flags); b43_set_status(dev, B43_STAT_INITIALIZED); write_unlock_irqrestore(&wl->tx_lock, flags); b43_pio_stop(dev); mutex_unlock(&wl->mutex); /* Must unlock as it would otherwise deadlock. No races here. * Cancel the possibly running self-rearming periodic work. */ cancel_delayed_work_sync(&dev->periodic_work); mutex_lock(&wl->mutex); b43_mac_suspend(dev); free_irq(dev->dev->irq, dev); b43dbg(wl, "Wireless interface stopped\n"); } /* Locking: wl->mutex */ static int b43_wireless_core_start(struct b43_wldev *dev) { int err; B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); drain_txstatus_queue(dev); err = request_irq(dev->dev->irq, b43_interrupt_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (err) { b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); goto out; } /* We are ready to run. */ b43_set_status(dev, B43_STAT_STARTED); /* Start data flow (TX/RX). */ b43_mac_enable(dev); b43_interrupt_enable(dev, dev->irq_savedstate); /* Start maintainance work */ b43_periodic_tasks_setup(dev); b43dbg(dev->wl, "Wireless interface started\n"); out: return err; } /* Get PHY and RADIO versioning numbers */ static int b43_phy_versioning(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; u32 tmp; u8 analog_type; u8 phy_type; u8 phy_rev; u16 radio_manuf; u16 radio_ver; u16 radio_rev; int unsupported = 0; /* Get PHY versioning */ tmp = b43_read16(dev, B43_MMIO_PHY_VER); analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT; phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT; phy_rev = (tmp & B43_PHYVER_VERSION); switch (phy_type) { case B43_PHYTYPE_A: if (phy_rev >= 4) unsupported = 1; break; case B43_PHYTYPE_B: if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 && phy_rev != 7) unsupported = 1; break; case B43_PHYTYPE_G: if (phy_rev > 9) unsupported = 1; break; #ifdef CONFIG_B43_NPHY case B43_PHYTYPE_N: if (phy_rev > 4) unsupported = 1; break; #endif #ifdef CONFIG_B43_PHY_LP case B43_PHYTYPE_LP: if (phy_rev > 1) unsupported = 1; break; #endif default: unsupported = 1; }; if (unsupported) { b43err(dev->wl, "FOUND UNSUPPORTED PHY " "(Analog %u, Type %u, Revision %u)\n", analog_type, phy_type, phy_rev); return -EOPNOTSUPP; } b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", analog_type, phy_type, phy_rev); /* Get RADIO versioning */ if (dev->dev->bus->chip_id == 0x4317) { if (dev->dev->bus->chip_rev == 0) tmp = 0x3205017F; else if (dev->dev->bus->chip_rev == 1) tmp = 0x4205017F; else tmp = 0x5205017F; } else { b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16; } radio_manuf = (tmp & 0x00000FFF); radio_ver = (tmp & 0x0FFFF000) >> 12; radio_rev = (tmp & 0xF0000000) >> 28; if (radio_manuf != 0x17F /* Broadcom */) unsupported = 1; switch (phy_type) { case B43_PHYTYPE_A: if (radio_ver != 0x2060) unsupported = 1; if (radio_rev != 1) unsupported = 1; if (radio_manuf != 0x17F) unsupported = 1; break; case B43_PHYTYPE_B: if ((radio_ver & 0xFFF0) != 0x2050) unsupported = 1; break; case B43_PHYTYPE_G: if (radio_ver != 0x2050) unsupported = 1; break; case B43_PHYTYPE_N: if (radio_ver != 0x2055 && radio_ver != 0x2056) unsupported = 1; break; case B43_PHYTYPE_LP: if (radio_ver != 0x2062) unsupported = 1; break; default: B43_WARN_ON(1); } if (unsupported) { b43err(dev->wl, "FOUND UNSUPPORTED RADIO " "(Manuf 0x%X, Version 0x%X, Revision %u)\n", radio_manuf, radio_ver, radio_rev); return -EOPNOTSUPP; } b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n", radio_manuf, radio_ver, radio_rev); phy->radio_manuf = radio_manuf; phy->radio_ver = radio_ver; phy->radio_rev = radio_rev; phy->analog = analog_type; phy->type = phy_type; phy->rev = phy_rev; return 0; } static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { phy->hardware_power_control = !!modparam_hwpctl; phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); } static void setup_struct_wldev_for_init(struct b43_wldev *dev) { dev->dfq_valid = 0; /* Assume the radio is enabled. If it's not enabled, the state will * immediately get fixed on the first periodic work run. */ dev->radio_hw_enable = 1; /* Stats */ memset(&dev->stats, 0, sizeof(dev->stats)); setup_struct_phy_for_init(dev, &dev->phy); /* IRQ related flags */ dev->irq_reason = 0; memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; dev->mac_suspended = 1; /* Noise calculation context */ memset(&dev->noisecalc, 0, sizeof(dev->noisecalc)); } static void b43_bluetooth_coext_enable(struct b43_wldev *dev) { struct ssb_sprom *sprom = &dev->dev->bus->sprom; u64 hf; if (!modparam_btcoex) return; if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST)) return; if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode) return; hf = b43_hf_read(dev); if (sprom->boardflags_lo & B43_BFL_BTCMOD) hf |= B43_HF_BTCOEXALT; else hf |= B43_HF_BTCOEX; b43_hf_write(dev, hf); } static void b43_bluetooth_coext_disable(struct b43_wldev *dev) { if (!modparam_btcoex) return; //TODO } static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) { #ifdef CONFIG_SSB_DRIVER_PCICORE struct ssb_bus *bus = dev->dev->bus; u32 tmp; if (bus->pcicore.dev && bus->pcicore.dev->id.coreid == SSB_DEV_PCI && bus->pcicore.dev->id.revision <= 5) { /* IMCFGLO timeouts workaround. */ tmp = ssb_read32(dev->dev, SSB_IMCFGLO); tmp &= ~SSB_IMCFGLO_REQTO; tmp &= ~SSB_IMCFGLO_SERTO; switch (bus->bustype) { case SSB_BUSTYPE_PCI: case SSB_BUSTYPE_PCMCIA: tmp |= 0x32; break; case SSB_BUSTYPE_SSB: tmp |= 0x53; break; } ssb_write32(dev->dev, SSB_IMCFGLO, tmp); } #endif /* CONFIG_SSB_DRIVER_PCICORE */ } static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) { u16 pu_delay; /* The time value is in microseconds. */ if (dev->phy.type == B43_PHYTYPE_A) pu_delay = 3700; else pu_delay = 1050; if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) pu_delay = 500; if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) pu_delay = max(pu_delay, (u16)2400); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay); } /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */ static void b43_set_pretbtt(struct b43_wldev *dev) { u16 pretbtt; /* The time value is in microseconds. */ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { pretbtt = 2; } else { if (dev->phy.type == B43_PHYTYPE_A) pretbtt = 120; else pretbtt = 250; } b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt); b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt); } /* Shutdown a wireless core */ /* Locking: wl->mutex */ static void b43_wireless_core_exit(struct b43_wldev *dev) { u32 macctl; B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); if (b43_status(dev) != B43_STAT_INITIALIZED) return; b43_set_status(dev, B43_STAT_UNINIT); /* Stop the microcode PSM. */ macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_PSM_RUN; macctl |= B43_MACCTL_PSM_JMP0; b43_write32(dev, B43_MMIO_MACCTL, macctl); if (!dev->suspend_in_progress) { b43_leds_exit(dev); b43_rng_exit(dev->wl); } b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); dev->phy.ops->switch_analog(dev, 0); if (dev->wl->current_beacon) { dev_kfree_skb_any(dev->wl->current_beacon); dev->wl->current_beacon = NULL; } ssb_device_disable(dev->dev, 0); ssb_bus_may_powerdown(dev->dev->bus); } /* Initialize a wireless core */ static int b43_wireless_core_init(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct ssb_bus *bus = dev->dev->bus; struct ssb_sprom *sprom = &bus->sprom; struct b43_phy *phy = &dev->phy; int err; u64 hf; u32 tmp; B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); err = ssb_bus_powerup(bus, 0); if (err) goto out; if (!ssb_device_is_enabled(dev->dev)) { tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); } /* Reset all data structures. */ setup_struct_wldev_for_init(dev); phy->ops->prepare_structs(dev); /* Enable IRQ routing to this device. */ ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); b43_imcfglo_timeouts_workaround(dev); b43_bluetooth_coext_disable(dev); if (phy->ops->prepare_hardware) { err = phy->ops->prepare_hardware(dev); if (err) goto err_busdown; } err = b43_chip_init(dev); if (err) goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_WLCOREREV, dev->dev->id.revision); hf = b43_hf_read(dev); if (phy->type == B43_PHYTYPE_G) { hf |= B43_HF_SYMW; if (phy->rev == 1) hf |= B43_HF_GDCW; if (sprom->boardflags_lo & B43_BFL_PACTRL) hf |= B43_HF_OFDMPABOOST; } else if (phy->type == B43_PHYTYPE_B) { hf |= B43_HF_SYMW; if (phy->rev >= 2 && phy->radio_ver == 0x2050) hf &= ~B43_HF_GDCW; } b43_hf_write(dev, hf); b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT, B43_DEFAULT_LONG_RETRY_LIMIT); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2); /* Disable sending probe responses from firmware. * Setting the MaxTime to one usec will always trigger * a timeout, so we never send any probe resp. * A timeout of zero is infinite. */ b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1); b43_rate_memory_init(dev); b43_set_phytxctl_defaults(dev); /* Minimum Contention Window */ if (phy->type == B43_PHYTYPE_B) { b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F); } else { b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF); } /* Maximum Contention Window */ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) { dev->__using_pio_transfers = 1; err = b43_pio_init(dev); } else { dev->__using_pio_transfers = 0; err = b43_dma_init(dev); } if (err) goto err_chip_exit; b43_qos_init(dev); b43_set_synth_pu_delay(dev, 1); b43_bluetooth_coext_enable(dev); ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */ b43_upload_card_macaddress(dev); b43_security_init(dev); if (!dev->suspend_in_progress) b43_rng_init(wl); b43_set_status(dev, B43_STAT_INITIALIZED); if (!dev->suspend_in_progress) b43_leds_init(dev); out: return err; err_chip_exit: b43_chip_exit(dev); err_busdown: ssb_bus_may_powerdown(bus); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; } static int b43_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; unsigned long flags; int err = -EOPNOTSUPP; /* TODO: allow WDS/AP devices to coexist */ if (conf->type != NL80211_IFTYPE_AP && conf->type != NL80211_IFTYPE_MESH_POINT && conf->type != NL80211_IFTYPE_STATION && conf->type != NL80211_IFTYPE_WDS && conf->type != NL80211_IFTYPE_ADHOC) return -EOPNOTSUPP; mutex_lock(&wl->mutex); if (wl->operating) goto out_mutex_unlock; b43dbg(wl, "Adding Interface type %d\n", conf->type); dev = wl->current_dev; wl->operating = 1; wl->vif = conf->vif; wl->if_type = conf->type; memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); spin_lock_irqsave(&wl->irq_lock, flags); b43_adjust_opmode(dev); b43_set_pretbtt(dev); b43_set_synth_pu_delay(dev, 0); b43_upload_card_macaddress(dev); spin_unlock_irqrestore(&wl->irq_lock, flags); err = 0; out_mutex_unlock: mutex_unlock(&wl->mutex); return err; } static void b43_op_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; unsigned long flags; b43dbg(wl, "Removing Interface type %d\n", conf->type); mutex_lock(&wl->mutex); B43_WARN_ON(!wl->operating); B43_WARN_ON(wl->vif != conf->vif); wl->vif = NULL; wl->operating = 0; spin_lock_irqsave(&wl->irq_lock, flags); b43_adjust_opmode(dev); memset(wl->mac_addr, 0, ETH_ALEN); b43_upload_card_macaddress(dev); spin_unlock_irqrestore(&wl->irq_lock, flags); mutex_unlock(&wl->mutex); } static int b43_op_start(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; int did_init = 0; int err = 0; bool do_rfkill_exit = 0; /* Kill all old instance specific information to make sure * the card won't use it in the short timeframe between start * and mac80211 reconfiguring it. */ memset(wl->bssid, 0, ETH_ALEN); memset(wl->mac_addr, 0, ETH_ALEN); wl->filter_flags = 0; wl->radiotap_enabled = 0; b43_qos_clear(wl); wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; /* First register RFkill. * LEDs that are registered later depend on it. */ b43_rfkill_init(dev); mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { err = b43_wireless_core_init(dev); if (err) { do_rfkill_exit = 1; goto out_mutex_unlock; } did_init = 1; } if (b43_status(dev) < B43_STAT_STARTED) { err = b43_wireless_core_start(dev); if (err) { if (did_init) b43_wireless_core_exit(dev); do_rfkill_exit = 1; goto out_mutex_unlock; } } out_mutex_unlock: mutex_unlock(&wl->mutex); if (do_rfkill_exit) b43_rfkill_exit(dev); return err; } static void b43_op_stop(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; b43_rfkill_exit(dev); cancel_work_sync(&(wl->beacon_update_trigger)); mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); mutex_unlock(&wl->mutex); cancel_work_sync(&(wl->txpower_adjust_work)); } static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set) { struct b43_wl *wl = hw_to_b43_wl(hw); unsigned long flags; spin_lock_irqsave(&wl->irq_lock, flags); b43_update_templates(wl); spin_unlock_irqrestore(&wl->irq_lock, flags); return 0; } static void b43_op_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd notify_cmd, struct ieee80211_sta *sta) { struct b43_wl *wl = hw_to_b43_wl(hw); B43_WARN_ON(!vif || wl->vif != vif); } static const struct ieee80211_ops b43_hw_ops = { .tx = b43_op_tx, .conf_tx = b43_op_conf_tx, .add_interface = b43_op_add_interface, .remove_interface = b43_op_remove_interface, .config = b43_op_config, .bss_info_changed = b43_op_bss_info_changed, .config_interface = b43_op_config_interface, .configure_filter = b43_op_configure_filter, .set_key = b43_op_set_key, .get_stats = b43_op_get_stats, .get_tx_stats = b43_op_get_tx_stats, .start = b43_op_start, .stop = b43_op_stop, .set_tim = b43_op_beacon_set_tim, .sta_notify = b43_op_sta_notify, }; /* Hard-reset the chip. Do not call this directly. * Use b43_controller_restart() */ static void b43_chip_reset(struct work_struct *work) { struct b43_wldev *dev = container_of(work, struct b43_wldev, restart_work); struct b43_wl *wl = dev->wl; int err = 0; int prev_status; mutex_lock(&wl->mutex); prev_status = b43_status(dev); /* Bring the device down... */ if (prev_status >= B43_STAT_STARTED) b43_wireless_core_stop(dev); if (prev_status >= B43_STAT_INITIALIZED) b43_wireless_core_exit(dev); /* ...and up again. */ if (prev_status >= B43_STAT_INITIALIZED) { err = b43_wireless_core_init(dev); if (err) goto out; } if (prev_status >= B43_STAT_STARTED) { err = b43_wireless_core_start(dev); if (err) { b43_wireless_core_exit(dev); goto out; } } out: if (err) wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43err(wl, "Controller restart FAILED\n"); else b43info(wl, "Controller restarted\n"); } static int b43_setup_bands(struct b43_wldev *dev, bool have_2ghz_phy, bool have_5ghz_phy) { struct ieee80211_hw *hw = dev->wl->hw; if (have_2ghz_phy) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz; if (dev->phy.type == B43_PHYTYPE_N) { if (have_5ghz_phy) hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy; } else { if (have_5ghz_phy) hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy; } dev->phy.supports_2ghz = have_2ghz_phy; dev->phy.supports_5ghz = have_5ghz_phy; return 0; } static void b43_wireless_core_detach(struct b43_wldev *dev) { /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); b43_phy_free(dev); } static int b43_wireless_core_attach(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct ssb_bus *bus = dev->dev->bus; struct pci_dev *pdev = bus->host_pci; int err; bool have_2ghz_phy = 0, have_5ghz_phy = 0; u32 tmp; /* Do NOT do any device initialization here. * Do it in wireless_core_init() instead. * This function is for gathering basic information about the HW, only. * Also some structs may be set up here. But most likely you want to have * that in core_init(), too. */ err = ssb_bus_powerup(bus, 0); if (err) { b43err(wl, "Bus powerup failed\n"); goto out; } /* Get the PHY type. */ if (dev->dev->id.revision >= 5) { u32 tmshigh; tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY); have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY); } else B43_WARN_ON(1); dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); err = b43_phy_versioning(dev); if (err) goto err_powerdown; /* Check if this device supports multiband. */ if (!pdev || (pdev->device != 0x4312 && pdev->device != 0x4319 && pdev->device != 0x4324)) { /* No multiband support. */ have_2ghz_phy = 0; have_5ghz_phy = 0; switch (dev->phy.type) { case B43_PHYTYPE_A: have_5ghz_phy = 1; break; case B43_PHYTYPE_G: case B43_PHYTYPE_N: case B43_PHYTYPE_LP: have_2ghz_phy = 1; break; default: B43_WARN_ON(1); } } if (dev->phy.type == B43_PHYTYPE_A) { /* FIXME */ b43err(wl, "IEEE 802.11a devices are unsupported\n"); err = -EOPNOTSUPP; goto err_powerdown; } if (1 /* disable A-PHY */) { /* FIXME: For now we disable the A-PHY on multi-PHY devices. */ if (dev->phy.type != B43_PHYTYPE_N) { have_2ghz_phy = 1; have_5ghz_phy = 0; } } err = b43_phy_allocate(dev); if (err) goto err_powerdown; dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); err = b43_validate_chipaccess(dev); if (err) goto err_phy_free; err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); if (err) goto err_phy_free; /* Now set some default "current_dev" */ if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); dev->phy.ops->switch_analog(dev, 0); ssb_device_disable(dev->dev, 0); ssb_bus_may_powerdown(bus); out: return err; err_phy_free: b43_phy_free(dev); err_powerdown: ssb_bus_may_powerdown(bus); return err; } static void b43_one_core_detach(struct ssb_device *dev) { struct b43_wldev *wldev; struct b43_wl *wl; /* Do not cancel ieee80211-workqueue based work here. * See comment in b43_remove(). */ wldev = ssb_get_drvdata(dev); wl = wldev->wl; b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); wl->nr_devs--; ssb_set_drvdata(dev, NULL); kfree(wldev); } static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) { struct b43_wldev *wldev; struct pci_dev *pdev; int err = -ENOMEM; if (!list_empty(&wl->devlist)) { /* We are not the first core on this chip. */ pdev = dev->bus->host_pci; /* Only special chips support more than one wireless * core, although some of the other chips have more than * one wireless core as well. Check for this and * bail out early. */ if (!pdev || ((pdev->device != 0x4321) && (pdev->device != 0x4313) && (pdev->device != 0x431A))) { b43dbg(wl, "Ignoring unconnected 802.11 core\n"); return -ENODEV; } } wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); if (!wldev) goto out; wldev->dev = dev; wldev->wl = wl; b43_set_status(wldev, B43_STAT_UNINIT); wldev->bad_frames_preempt = modparam_bad_frames_preempt; tasklet_init(&wldev->isr_tasklet, (void (*)(unsigned long))b43_interrupt_tasklet, (unsigned long)wldev); INIT_LIST_HEAD(&wldev->list); err = b43_wireless_core_attach(wldev); if (err) goto err_kfree_wldev; list_add(&wldev->list, &wl->devlist); wl->nr_devs++; ssb_set_drvdata(dev, wldev); b43_debugfs_add_device(wldev); out: return err; err_kfree_wldev: kfree(wldev); return err; } #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice) ( \ (pdev->vendor == PCI_VENDOR_ID_##_vendor) && \ (pdev->device == _device) && \ (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \ (pdev->subsystem_device == _subdevice) ) static void b43_sprom_fixup(struct ssb_bus *bus) { struct pci_dev *pdev; /* boardflags workarounds */ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST; if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) bus->sprom.boardflags_lo |= B43_BFL_PACTRL; if (bus->bustype == SSB_BUSTYPE_PCI) { pdev = bus->host_pci; if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; } } static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) { struct ieee80211_hw *hw = wl->hw; ssb_set_devtypedata(dev, NULL); ieee80211_free_hw(hw); } static int b43_wireless_init(struct ssb_device *dev) { struct ssb_sprom *sprom = &dev->bus->sprom; struct ieee80211_hw *hw; struct b43_wl *wl; int err = -ENOMEM; b43_sprom_fixup(dev->bus); hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops); if (!hw) { b43err(NULL, "Could not allocate ieee80211 device\n"); goto out; } /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_MESH_POINT) | BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); hw->queues = b43_modparam_qos ? 4 : 1; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); else SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); /* Get and initialize struct b43_wl */ wl = hw_to_b43_wl(hw); memset(wl, 0, sizeof(*wl)); wl->hw = hw; spin_lock_init(&wl->irq_lock); rwlock_init(&wl->tx_lock); spin_lock_init(&wl->leds_lock); spin_lock_init(&wl->shm_lock); mutex_init(&wl->mutex); INIT_LIST_HEAD(&wl->devlist); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); ssb_set_devtypedata(dev, wl); b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); err = 0; out: return err; } static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) { struct b43_wl *wl; int err; int first = 0; wl = ssb_get_devtypedata(dev); if (!wl) { /* Probing the first core. Must setup common struct b43_wl */ first = 1; err = b43_wireless_init(dev); if (err) goto out; wl = ssb_get_devtypedata(dev); B43_WARN_ON(!wl); } err = b43_one_core_attach(dev, wl); if (err) goto err_wireless_exit; if (first) { err = ieee80211_register_hw(wl->hw); if (err) goto err_one_core_detach; } out: return err; err_one_core_detach: b43_one_core_detach(dev); err_wireless_exit: if (first) b43_wireless_exit(dev, wl); return err; } static void b43_remove(struct ssb_device *dev) { struct b43_wl *wl = ssb_get_devtypedata(dev); struct b43_wldev *wldev = ssb_get_drvdata(dev); /* We must cancel any work here before unregistering from ieee80211, * as the ieee80211 unreg will destroy the workqueue. */ cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); b43_one_core_detach(dev); if (list_empty(&wl->devlist)) { /* Last core on the chip unregistered. * We can destroy common struct b43_wl. */ b43_wireless_exit(dev, wl); } } /* Perform a hardware reset. This can be called from any context. */ void b43_controller_restart(struct b43_wldev *dev, const char *reason) { /* Must avoid requeueing, if we are in shutdown. */ if (b43_status(dev) < B43_STAT_INITIALIZED) return; b43info(dev->wl, "Controller RESET (%s) ...\n", reason); queue_work(dev->wl->hw->workqueue, &dev->restart_work); } #ifdef CONFIG_PM static int b43_suspend(struct ssb_device *dev, pm_message_t state) { struct b43_wldev *wldev = ssb_get_drvdata(dev); struct b43_wl *wl = wldev->wl; b43dbg(wl, "Suspending...\n"); mutex_lock(&wl->mutex); wldev->suspend_in_progress = true; wldev->suspend_init_status = b43_status(wldev); if (wldev->suspend_init_status >= B43_STAT_STARTED) b43_wireless_core_stop(wldev); if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) b43_wireless_core_exit(wldev); mutex_unlock(&wl->mutex); b43dbg(wl, "Device suspended.\n"); return 0; } static int b43_resume(struct ssb_device *dev) { struct b43_wldev *wldev = ssb_get_drvdata(dev); struct b43_wl *wl = wldev->wl; int err = 0; b43dbg(wl, "Resuming...\n"); mutex_lock(&wl->mutex); if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { err = b43_wireless_core_init(wldev); if (err) { b43err(wl, "Resume failed at core init\n"); goto out; } } if (wldev->suspend_init_status >= B43_STAT_STARTED) { err = b43_wireless_core_start(wldev); if (err) { b43_leds_exit(wldev); b43_rng_exit(wldev->wl); b43_wireless_core_exit(wldev); b43err(wl, "Resume failed at core start\n"); goto out; } } b43dbg(wl, "Device resumed.\n"); out: wldev->suspend_in_progress = false; mutex_unlock(&wl->mutex); return err; } #else /* CONFIG_PM */ # define b43_suspend NULL # define b43_resume NULL #endif /* CONFIG_PM */ static struct ssb_driver b43_ssb_driver = { .name = KBUILD_MODNAME, .id_table = b43_ssb_tbl, .probe = b43_probe, .remove = b43_remove, .suspend = b43_suspend, .resume = b43_resume, }; static void b43_print_driverinfo(void) { const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", *feat_leds = "", *feat_rfkill = ""; #ifdef CONFIG_B43_PCI_AUTOSELECT feat_pci = "P"; #endif #ifdef CONFIG_B43_PCMCIA feat_pcmcia = "M"; #endif #ifdef CONFIG_B43_NPHY feat_nphy = "N"; #endif #ifdef CONFIG_B43_LEDS feat_leds = "L"; #endif #ifdef CONFIG_B43_RFKILL feat_rfkill = "R"; #endif printk(KERN_INFO "Broadcom 43xx driver loaded " "[ Features: %s%s%s%s%s, Firmware-ID: " B43_SUPPORTED_FIRMWARE_ID " ]\n", feat_pci, feat_pcmcia, feat_nphy, feat_leds, feat_rfkill); } static int __init b43_init(void) { int err; b43_debugfs_init(); err = b43_pcmcia_init(); if (err) goto err_dfs_exit; err = ssb_driver_register(&b43_ssb_driver); if (err) goto err_pcmcia_exit; b43_print_driverinfo(); return err; err_pcmcia_exit: b43_pcmcia_exit(); err_dfs_exit: b43_debugfs_exit(); return err; } static void __exit b43_exit(void) { ssb_driver_unregister(&b43_ssb_driver); b43_pcmcia_exit(); b43_debugfs_exit(); } module_init(b43_init) module_exit(b43_exit)