/* linux/arch/arm/mach-s3c2410/mach-anubis.c * * Copyright (c) 2003-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Modifications: * 02-May-2005 BJD Copied from mach-bast.c * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/arch/anubis-map.h> #include <asm/arch/anubis-irq.h> #include <asm/arch/anubis-cpld.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-mem.h> #include <asm/arch/regs-lcd.h> #include <asm/arch/nand.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> #include "clock.h" #include "devs.h" #include "cpu.h" #define COPYRIGHT ", (c) 2005 Simtec Electronics" static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, /* we could possibly compress the next set down into a set of smaller tables * pagetables, but that would mean using an L2 section, and it still means * we cannot actually feed the same register to an LDR due to 16K spacing */ /* CPLD control registers */ { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, /* IDE drives */ { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { [0] = { .name = "uclk", .divisor = 1, .min_baud = 0, .max_baud = 0, }, [1] = { .name = "pclk", .divisor = 1, .min_baud = 0, .max_baud = 0. } }; static struct s3c2410_uartcfg anubis_uartcfgs[] = { [0] = { .hwport = 0, .flags = 0, .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, .clocks = anubis_serial_clocks, .clocks_size = ARRAY_SIZE(anubis_serial_clocks) }, [1] = { .hwport = 2, .flags = 0, .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, .clocks = anubis_serial_clocks, .clocks_size = ARRAY_SIZE(anubis_serial_clocks) }, }; /* NAND Flash on Anubis board */ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; static struct mtd_partition anubis_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, .offset = 0 }, [1] = { .name = "/boot", .size = SZ_4M - SZ_16K, .offset = SZ_16K, }, [2] = { .name = "user1", .offset = SZ_4M, .size = SZ_32M - SZ_4M, }, [3] = { .name = "user2", .offset = SZ_32M, .size = MTDPART_SIZ_FULL, } }; /* the Anubis has 3 selectable slots for nand-flash, the two * on-board chip areas, as well as the external slot. * * Note, there is no current hot-plug support for the External * socket. */ static struct s3c2410_nand_set anubis_nand_sets[] = { [1] = { .name = "External", .nr_chips = 1, .nr_map = external_map, .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), .partitions = anubis_default_nand_part }, [0] = { .name = "chip0", .nr_chips = 1, .nr_map = chip0_map, .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), .partitions = anubis_default_nand_part }, [2] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), .partitions = anubis_default_nand_part }, }; static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) { unsigned int tmp; slot = set->nr_map[slot] & 3; pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", slot, set, set->nr_map); tmp = __raw_readb(ANUBIS_VA_CTRL1); tmp &= ~ANUBIS_CTRL1_NANDSEL; tmp |= slot; pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); __raw_writeb(tmp, ANUBIS_VA_CTRL1); } static struct s3c2410_platform_nand anubis_nand_info = { .tacls = 25, .twrph0 = 80, .twrph1 = 80, .nr_sets = ARRAY_SIZE(anubis_nand_sets), .sets = anubis_nand_sets, .select_chip = anubis_nand_select, }; /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c, &s3c_device_rtc, &s3c_device_nand, }; static struct clk *anubis_clocks[] = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, &s3c24xx_clkout1, &s3c24xx_uclk, }; static struct s3c24xx_board anubis_board __initdata = { .devices = anubis_devices, .devices_count = ARRAY_SIZE(anubis_devices), .clocks = anubis_clocks, .clocks_count = ARRAY_SIZE(anubis_clocks) }; static void __init anubis_map_io(void) { /* initialise the clocks */ s3c24xx_dclk0.parent = NULL; s3c24xx_dclk0.rate = 12*1000*1000; s3c24xx_dclk1.parent = NULL; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; s3c24xx_clkout1.parent = &s3c24xx_dclk1; s3c24xx_uclk.parent = &s3c24xx_clkout1; s3c_device_nand.dev.platform_data = &anubis_nand_info; s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); s3c24xx_set_board(&anubis_board); /* ensure that the GPIO is setup */ s3c2410_gpio_setpin(S3C2410_GPA0, 1); } MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = anubis_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END