Commit graph

776 commits

Author SHA1 Message Date
Dave Airlie
669899878c drm/radeon: fix hdmi offset bug reported by smatch.
Reported-by: Dan Carpenter
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19 10:35:02 +10:00
Alex Deucher
8e36ed0084 drm/radeon/kms: hpd cleanup
- Use radeon hpd enum consistently (in both hotplug and dp)
- Legacy r100 with DVI should be HPD_1 not NONE

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19 10:31:41 +10:00
Alex Deucher
2bfcc0fc69 drm/radeon/kms: reset ddc_bus in object header parsing
Some LVDS connectors don't have a ddc bus, so reset the
ddc bus to invalid before parsing the next connector
to avoid using stale ddc bus data.  Should fix
fdo bug 28164.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19 10:31:16 +10:00
Dave Airlie
05ea893c46 Merge remote branch 'anholt/drm-intel-next' into drm-next
* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...
2010-05-19 09:35:51 +10:00
Dave Airlie
26481fb156 drm/radeon/pm: fix device_create_file return value checks.
print an error if these fail.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:58:56 +10:00
Alex Deucher
4bff51711c drm/radeon/kms/pm: fix r6xx+ profile setup
This patch is a combination of the previous two profile
patches, but without the index bugs.  It cleans up and
fixes some issues with pm profile setup on r6xx chips.
Some tables have different orderings for the power states,
also, r600 only has 1 clock mode per power state. On
desktop cards there are no battery modes, so the low and high
power states are the same.  For the low profile case, choose
the lower clock mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:55 +10:00
Alex Deucher
ce8a3eb20c drm/radeon/kms/pm: make pm spam debug only
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:53 +10:00
Alex Deucher
ce8f53709b drm/radeon/kms/pm: rework power management
- Separate dynpm and profile based power management methods.  You can select the pm method
  by echoing the selected method ("dynpm" or "profile") to power_method in sysfs.
- Expose basic 4 profile in profile method
  "default" - default clocks
  "auto" - select between low and high based on ac/dc state
  "low" - DC, low power mode
  "high" - AC, performance mode
  The current base profile is "default", but it should switched to "auto" once we've tested
  on more systems.  Switching the state is a matter of echoing the requested profile to
  power_profile in sysfs.  The lowest power states are selected automatically when dpms turns
  the monitors off in all states but default.
- Remove dynamic fence-based reclocking for the moment.  We can revisit this later once we
  have basic pm in.
- Move pm init/fini to modesetting path.  pm is tightly coupled with display state.  Make sure
  display side is initialized before pm.
- Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume.
- Remove dynpm module option.  It's now selectable via sysfs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:52 +10:00
Alex Deucher
d7311171c4 drm/radeon/kms/pm: add support for no display power states
The lowest power states often cause display problems, so only enable
them when all displays are off.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:50 +10:00
Alex Deucher
ca2af92311 drm/radeon/kms: fix lock ordering in ring, ib handling
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:48 +10:00
Matthew Garrett
01434b4bfb radeon: Use fences to gate entry to reclocking on <r600
GUI idle interrupts don't seem to work terribly well on r500 and earlier,
so let's use a fence instead.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:47 +10:00
Matthew Garrett
91700f3cac radeon: Split out ring locking and allocation
We need to handle the ring while we've already locked it, so split out
the allocation and commit functions in order to allow them to be used.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:45 +10:00
Alex Deucher
78930b1c39 drm/radeon/kms: enable misc pm power state features on r1xx-r4xx
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc,

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:43 +10:00
Alex Deucher
536fcd5124 drm/radeon/kms: enable misc pm power state features on r5xx, rs6xx
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc,

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:42 +10:00
Alex Deucher
4f3218cbc3 drm/radeon/kms: re-enable gui idle interrupts on r6xx+
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:38 +10:00
Dave Airlie
f4b7fb94c5 drm/radeon/kms: take vram mutex pointer before derefing object.
since derefing the object might free it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:37 +10:00
Alex Deucher
539d241817 drm/radeon/kms: more pm fixes
- disable gui idle interrupt use
  Seems to hang some r5xx chips
- move vbl range check into
  existing vbl check function in
  radeon_pm.c
- disable crtc mc acccess for the
  whole reclocking process

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:35 +10:00
Ben Skeggs
68adac5e49 drm: move radeon_fixed.h to shared drm_fixed.h header
Will be used by nouveau driver also in the near future.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:33 +10:00
Matthew Garrett
15a7df8db8 radeon: Enable memory reclocking on r100-500
This seems to be relatively stable now, so enable it for these chipsets
too.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:31 +10:00
Matthew Garrett
f81f202402 radeon: Try harder to ensure we reclock in vblank
The vblank interrupt on r600 doesn't seem to be especially reliable, so
perform some sanity checks before the actual reclock.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:29 +10:00
Matthew Garrett
612e06ce9c radeon: Fix locking in power management paths
The ttm code could take vram_mutex followed by cp_mutex, while the
reclocking code would do the reverse. Hilarity could ensue.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:27 +10:00
Matthew Garrett
c37d230af4 radeon: Make sure that we determine the correct PM state before transition
We need to choose the correct PM state to transition into before starting
the actual change. Call radeon_get_power_state() at the top of the clock
setting to do so.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:26 +10:00
Matthew Garrett
956ac86d92 radeon: Enable memory reclockong on r600
With luck, dynamic memory reclocking on r600 should be stable with
the previous patches. Enable it.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:23 +10:00
Matthew Garrett
d9932a3241 radeon: Stop the ttm workqueue while reclocking
The ttm bo workqueue may touch objects while we're reclocking, so make
sure it's blocked until we're done.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:22 +10:00
Matthew Garrett
8f5b5e632c radeon: Take drm struct_mutex over reclocking
We need to block the drm core from doing anything that may touch our vram
during reclock, so take the drm mutex for the duration.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:19 +10:00
Matthew Garrett
5876dd249e radeon: Unmap vram pages when reclocking
Touching vram while the card is reclocking can lead to lockups. Unmap
any pages that could be touched by the CPU and block any accesses to
vram until the reclocking is complete.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:17 +10:00
Matthew Garrett
2aba631c00 radeon: Unify PM entry paths
There's a moderate amount of effort involved in setting the card up for
clock transitions, so unify the codepaths to make it easier to implement.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:16 +10:00
Alex Deucher
a424816fb3 drm/radeon/kms/pm: rework power management
Add two new sysfs attributes:
- dynpm
- power_state

Echoing 0/1 to dynpm disables/enables dynamic power management.
The driver scales the sclk dynamically based on the number of
queued fences.  dynpm only scales sclk dynamically in single head
mode.

Echoing x.y to power_state selects a static power state (x) and clock
mode (y).  This allows you to statically select a power state and clock
mode.  Selecting a static clock mode will disable dynpm.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:14 +10:00
Alex Deucher
49e02b7306 drm/radeon/kms/pm: add additional asic callbacks
- pm_misc() - handles voltage, pcie lanes, and other non
clock related power mode settings.  Currently disabled.
Needs further debugging

- pm_prepare() - disables crtc mem requests right now.
All memory clients need to be disabled when changing
memory clocks.  This function can be expanded to include
disabling fb access as well.

- pm_finish() - enable active memory clients.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:12 +10:00
Alex Deucher
58e21dff53 drm/radeon/kms/pm: restore default power state on exit
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:10 +10:00
Alex Deucher
79daedc942 drm/radeon/kms: minor pm cleanups
- remove non_clock_info struct
- track power state misc flags

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:08 +10:00
Alex Deucher
d91eeb7862 drm/radeon/kms/pm: clean power state printing
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:07 +10:00
Alex Deucher
90c3905950 drm/radeon/kms/pm: don't enable pm if there is only on power state
Just adds overhead when the power state will never change.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:05 +10:00
Alex Deucher
678e7dfa9e drm/radeon/kms/atom: load hwmon drivers
Hook the atom table parsing up to module loading, so we can automatically
load the appropriate hwmon drivers.

Based on initial patch for r6xx from Matthew Garrett

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:02 +10:00
Alex Deucher
c00f53be5e drm/radeon/kms/pm: update display watermarks with power state changes
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:21:00 +10:00
Alex Deucher
a48b9b4edb drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)
This also simplifies the code and enables reclocking with multiple heads
active by tracking whether the power states are single or multi-head
capable.

Eventually, we will want to select a power state based on external
factors (AC/DC state, user selection, etc.).

(v2) Update for evergreen

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:58 +10:00
Alex Deucher
bae6b56273 drm/radeon/kms/pm: add asic specific callbacks for setting power state (v2)
(v2) Add evergreen vbl checks

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:57 +10:00
Alex Deucher
03214bd5c6 drm/radeon/kms/pm: move pm state update to crtc functions
crtcs are what we ultimately care about wrt to pm.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:55 +10:00
Alex Deucher
8a56df632e drm/radeon/kms/pm: interate across crtcs for vblank
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:53 +10:00
Alex Deucher
02b17cc053 drm/radeon/kms/atom/pm: rework power mode parsing
On pre-r6xx, the power mode array is usually ordered:
low
...
high
default

On r6xx+:
default
low
...
high

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:52 +10:00
Alex Deucher
ef6e6cf56a drm/radeon/kms: wait for gpu idle before changing power mode
set proper wait condition as noted by Rafał Miłecki.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:50 +10:00
Alex Deucher
2031f77ca9 drm/radeon/kms: add support for gui idle interrupts (v4)
Useful for certain power management operations.  You
need to wait for the GUI engine (2D, 3D, CP, etc.) to be
idle before changing clocks or adjusting engine parameters.

(v2) Fix gui idle enable on pre-r6xx asics

(v3) The gui idle interrrupt status bit is permanently asserted
on pre-r6xx chips, but the interrrupt is still generated.
workaround it in the driver.

(v4) Add support for evergreen

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:49 +10:00
Alex Deucher
def9ba9cf6 drm/radeon/kms: add gui_idle callback
Check to see if the GUI engine and related blocks
(2D, 3D, CP, etc) are idle or not.  There are a number
of cases when we need to know if the drawing engine
is busy.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 18:20:47 +10:00
Dave Airlie
eb1f8e4f3b drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:11 +10:00
Marcin Slusarz
1471ca9aa7 fbdev: allow passing more than one aperture for handoff
It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:27 +10:00
Jerome Glisse
bc35afdb18 drm/radeon/kms: add query for crtc hw id from crtc id to get info V2
Userspace need to know the hw crtc id (0, 1, 2, ...) from the drm
crtc id. Bump the minor version so userspace can enable conditionaly
features depend on this.

V2 use num_crtc and avoid DRM_ERROR

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:59:08 +10:00
Julia Lawall
f405a1ab2b drivers/gpu/drm: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:55:55 +10:00
Alex Deucher
68b61a7fd2 drm/radeon/kms/combios: match lvds panel info parsing to ddx
Should work better on some panels.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:54:22 +10:00
Alex Deucher
1ff26a3604 drm/radeon/kms/atom: fix typo in LVDS panel info parsing
Fixes LVDS issues on some laptops; notably laptops with
2048x1536 panels.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:53:52 +10:00
Alex Deucher
8bf3aae621 drm/radeon/kms: fix copy pasto in disable encoders patch
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-11 14:53:56 +10:00