Commit graph

6 commits

Author SHA1 Message Date
Anton Blanchard
63e6c5b810 powerpc: Pair loads and stores in copy_4k_page
A number of our chips like loads and stores to be paired. A small kernel
module testcase shows the improvement of pairing loads and stores in
copy_4k_page:

POWER6: +9%
POWER7: +1.5%

#include <linux/module.h>
#include <linux/mm.h>

#define ITERATIONS 10000000

static int __init copypage_init(void)
{
	struct timespec before, after;
	unsigned long i;
	struct page *destpage, *srcpage;
	char *dest, *src;

	destpage = alloc_page(GFP_KERNEL);
	srcpage = alloc_page(GFP_KERNEL);

	dest = page_address(destpage);
	src = page_address(srcpage);

	getnstimeofday(&before);

	for (i = 0; i < ITERATIONS; i++)
		copy_4K_page(dest, src);

	getnstimeofday(&after);

	free_page((unsigned long)dest);
	free_page((unsigned long)src);

	printk(KERN_DEBUG "copy_4K_page loop took %lu ns\n",
		(after.tv_sec - before.tv_sec) * NSEC_PER_SEC +
		(after.tv_nsec - before.tv_nsec));

	return 0;
}

static void __exit copypage_exit(void)
{
}

module_init(copypage_init)
module_exit(copypage_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-17 14:03:16 +11:00
Anton Blanchard
3cd980dbc1 powerpc: perf_event: Cleanup copy_page output by hiding setup symbol
A lot of hits in "setup" doesn't make much sense, so hide this symbol and
allow all the hits to end up in copy_4k_page.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:05 +11:00
Mark Nelson
57dda6ef5b powerpc: New copy_4K_page()
This new copy_4K_page() function was originally tuned for the best
performance on the Cell processor, but after testing on more 64bit
powerpc chips it was found that with a small modification it either
matched the performance offered by the current mainline version or
bettered it by a small amount.

It was found that on a Cell-based QS22 blade the amount of system
time measured when compiling a 2.6.26 pseries_defconfig decreased
by 4%. Using the same test, a 4-way 970MP machine saw a decrease of
2% in system time. No noticeable change was seen on Power4, Power5
or Power6.

The 4096 byte page is copied in thirty-two 128 byte strides. An
initial setup loop executes dcbt instructions for the whole source
page and dcbz instructions for the whole destination page. To do
this, the cache line size is retrieved from ppc64_caches.

A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the
previous patch) is used to make the modification to this new copy
routine - on Power4, 970 and Cell the feature bit is set so the
setup loop is executed, but on all other 64bit chips the setup
loop is nop'ed out.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:07:42 -07:00
Jon Mason
2ef9481e66 [PATCH] powerpc: trivial: modify comments to refer to new location of files
This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree.  I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:53:51 +11:00
Benjamin Herrenschmidt
3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Paul Mackerras
70d64ceaa1 powerpc: Rename files to have consistent _32/_64 suffixes
This doesn't change any code, just renames things so we consistently
have foo_32.c and foo_64.c where we have separate 32- and 64-bit
versions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:52:43 +10:00
Renamed from arch/powerpc/lib/copypage.S (Browse further)