Initialize default pixel format in driver probe() rather than in
s_power handler. This also prevents resetting the configuration
applied before the device was powered on.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is prerequisite for enabling the sub-device node.
The control handler is now initialized in driver's probe callback
in order to allow the user space access controls before the device
power is enabled with s_power. This is needed due to s_power being
currently called only by the host driver.
It also adds the subdev internal operations, only open() for now
for the TRY format initialization.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
v4l2_ctrl_handler_setup() may fail so check its return value when
restoring controls after device is powered on. While at it simplify
the m5mols_restore_function() a bit.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change the v4l2_device notifications id to S5P_FIMC_TX_END_NOTIFY.
Moreover, when frame capture fails, send an 'end of frame' notification
with size set to 0 to let the host driver return a buffer back to the
user and prevent applications waiting forever on DQBUF.
The notification is needed only for the s5p-fimc driver.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Improve the single frame capture set up sequence. Since there is
no need to re-enable the interrupts in each capture sequence, unmask
the required interrupts once at the device initialization time.
Signed-off-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The M-5MOLS internal controller's initialization time depends on the
hardware and firmware revision. Currently the driver just waits for
worst case time period, after applying the voltage supplies, for
the device to be ready. The M-5MOLS supports "System initialization"
interrupt which is triggered after the controller finished booting.
So use this interrupt to optimize the initialization sequence.
After the voltage supplies are applied the I2C communication will
fail, until the internal controller initializes to Flash Writer
state. For the period when the I2C is not accessible use the
isp_ready flag to suppress the error logs.
Signed-off-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is no need to keep this in the drivers' private data structure,
an on the stack variable is enough. Also simplify a bit the ISP state
switching function.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The work struct based interrupt handling is not flexible enough
as the M-5MOLS control sequence involves I2C access sequences
before and after an interrupt is generated. A single waitqueue is
enough for the job so remove the work struct based code.
Signed-off-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make m5mols_busy_wait function jiffies based rather than relying
on some fixed number of I2C read iterations while busy waiting
for the device to execute a request. With fixed number of iterations
we may be getting different wait times, depending on the I2C speed.
In some conditions we have to wait even if the I2C communications
fails, in those cases M5MOLS_I2C_RDY_WAIT_MASK should be passed
as the mask argument to m5mols_busy_wait().
Signed-off-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The redundant definitions of the m5mols I2C register addresses within
the pages (categories) are removed. In place of symbolic definitions
plain numbers are used which simplifies the code and eases identifying
the registers in the documentation.
Also make the m5mols_busy() function accept I2C_REG() value as a register
address, like all other functions, rather than using the category and
command values.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On Exynos SoCs the FIMC IP allows to configure globally the alpha
component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555
and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control
in order to let the applications control the alpha component value.
The alpha value range depends on the pixel format, for RGB32 it's
0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15
(4-bits). The v4l2 control range is always 0..255 and the alpha
component data width is determined by currently set format on the
V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications
need to match the alpha channel value range and the pixel format
since the driver will clamp the alpha component. Depending on
fourcc the valid alpha bits are:
- V4L2_PIX_FMT_RGB555 [0]
- V4L2_PIX_FMT_RGB444 [3:0]
- V4L2_PIX_FMT_RGB32 [7:0]
When switching to a pixel format with smaller alpha component width
the currently set alpha value will be clamped to maximum value valid
for current format. When switching to a format with wider alpha the
alpha value remains unchanged.
The variant description data structure is extended with a new entry
so an additional control is created only where really supported by
the hardware.
V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid
for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture
or memory-to-memory devices that are capable of setting up the per-pixel
alpha component to some arbitrary value. It allows to set the alpha
component for all pixels to an arbitrary value.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linux 3.2-rc7
* tag 'v3.2-rc7': (1304 commits)
Linux 3.2-rc7
netfilter: xt_connbytes: handle negation correctly
Btrfs: call d_instantiate after all ops are setup
Btrfs: fix worker lock misuse in find_worker
net: relax rcvbuf limits
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
net: introduce DST_NOPEER dst flag
mqprio: Avoid panic if no options are provided
bridge: provide a mtu() method for fake_dst_ops
md/bitmap: It is OK to clear bits during recovery.
md: don't give up looking for spares on first failure-to-add
md/raid5: ensure correct assessment of drives during degraded reshape.
md/linear: fix hot-add of devices to linear arrays.
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
ipv4: using prefetch requires including prefetch.h
VFS: Fix race between CPU hotplug and lglocks
vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
USB: Fix usb/isp1760 build on sparc
net: Add a flow_cache_flush_deferred function
...
Conflicts:
drivers/media/common/tuners/tda18218.c
drivers/media/video/omap3isp/ispccdc.c
drivers/staging/media/as102/as102_drv.h
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
While tda10021 supports both DVB-C Annex A and C, it is currently
hard-coded to Annex A. Add support for Annex C and re-work the
code in order to report the delivery systems, thans to Andreas,
that passed us the register settings for the Roll-off factor.
Thanks-to: Andreas Oberriter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert the existing data struct to use the QAM modulation macros,
instead of assuming that they're numbered from 0 to 5.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The difference between Annex A and C is the roll-off factor.
Properly implement it inside the driver, using the information
provided by Andreas.
Thanks-to: Andreas Oberriter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert the existing data struct to use the QAM modulation macros,
instead of assuming that they're numbered from 0 to 5.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of using a roll-off factor, change DRX-K & friends to select
the bandwidth filter and the Nyquist half roll-off via delivery system.
This provides a cleaner support for Annex A/C switch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of trying to propagate errors down the pipeline manually (and
failing to do so properly in all cases), flag SBL errors in the pipeline
to which the entity that triggered the error belongs, and use pipeline
error flags to mark buffers as faulty when completing them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When mapping from a V4L2 pixel format to a media bus format in the
VIDIOC_TRY_FMT and VIDIOC_S_FMT handlers, the requested format may be
unsupported by the driver. Return a hardcoded format instead of
WARN()ing in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch adds the driver for the as3645a LED flash controller. This
controller supports a high power led in flash and torch modes and an
indicator light, sometimes also called privacy light.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com>
Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Antti Koskipaa <antti.koskipaa@gmail.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When enumerating an entity, assign the entire entity specification
instead of only the first two words. (This requires giving the
specification union a name.)
So far, no driver actually uses more than two words, but this will
be needed for ALSA entities.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
[laurent.pinchart@ideasonboard.com: Rename specification to info]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The HS/VS interrupt handler needs to access the pipeline object. It
erronously tries to get it from the CCDC output video node, which isn't
necessarily included in the pipeline. This leads to a NULL pointer
dereference.
Fix the bug by getting the pipeline object from the CCDC subdev entity.
Reported-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The maximum preview engine output size depends on the ISP revision, not
the OMAP revision. Rename the macros accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hauppauge RC-5 tables require the full scancodes. The code at budget-ci
handles it right, however, it request the rc-code to mask them with 0xff,
breaking support for some remote controllers.
Fix it by not selecting a scancode mask when the driver is on full_rc5 mode.
Reported-by: Brian May <brian@microcomaustralia.com.au>
Tested-by: Brian May <brian@microcomaustralia.com.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This reverts commit ff83bd82cb.
As requested by Antti:
From a talk with him at #linuxtv irc, he strong feeling that some apps
like MythTV will do a lot a lot of I2C I/O and now it adds locks,
with utimatelly means more delays. This could cause bad effects.
There is a new patch for 3.3 that re-writes af9013 in order to limit
I2C I/O. and thus those patches could be nice to have together
because those user who has has problems are most likely MythTV users.
So, let's revert this commit for now.
Requested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Override default delivery system information provided by FE_GET_INFO, so
that applications can enumerate delivery systems provided by the frontend.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Override default delivery system information provided by FE_GET_INFO, so
that applications can enumerate delivery systems provided by the frontend.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Override default delivery system information provided by FE_GET_INFO, so
that applications can enumerate delivery systems provided by the frontend.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, for any multi-standard frontend it is assumed that it just
has a single standard capability. This is fine in some cases, but
makes things hard when there are incompatible standards in conjuction.
Eg: DVB-S can be seen as a subset of DVB-S2, but the same doesn't hold
the same for DSS. This is not specific to any driver as it is, but a
generic issue. This was handled correctly in the multiproto tree,
while such functionality is missing from the v5 API update.
http://www.linuxtv.org/pipermail/vdr/2008-November/018417.html
Later on a FE_CAN_2G_MODULATION was added as a hack to workaround this
issue in the v5 API, but that hack is incapable of addressing the
issue, as it can be used to simply distinguish between DVB-S and
DVB-S2 alone, or another X vs X2 modulation. If there are more systems,
then you have a potential issue.
An application needs to query the device capabilities before requesting
any operation from the device.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Acked-by: Andreas Oberritter <obi@linuxtv.org>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-By: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/tm6000/tm6000-input.c: In function ‘tm6000_ir_int_start’:
drivers/media/video/tm6000/tm6000-input.c:381:3: warning: ‘return’ with no value, in function returning non-void [-Wreturn-type]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When using only subdev user-space operations the camera
interface input was not configured properly. Fix this by
updating the corresponding data structure in set_fmt
operation.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a potential integer overflow in uvc_ioctl_ctrl_map(). When a
large xmap->menu_count is passed from the userspace, the subsequent call
to kmalloc() will allocate a buffer smaller than expected.
map->menu_count and map->menu_info would later be used in a loop (e.g.
in uvc_query_v4l2_ctrl), which leads to out-of-bound access.
The patch checks the ioctl argument and returns -EINVAL for zero or too
large values in xmap->menu_count.
Signed-off-by: Haogang Chen <haogangchen@gmail.com>
[laurent.pinchart@ideasonboard.com Prevent excessive memory consumption]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
UVC devices transmit a device timestamp along with video frames. Convert
the timestamp to a host timestamp and use it to fill the V4L2 buffer
timestamp field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Create a debugfs entry per UVC stream. This will be used to export
stream statistics.
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[mchehab@redhat.com: add incude <linux/module.h> to avoid compilation breakage]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
GET_RES request support is mandatory for extension units, but some
cameras still choke on it (one example is the Logitech QuickCam PTZ that
returns a single byte for the PTZ relative control instead of four).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of skipping the payload completely, which would make the
resulting image corrupted anyway, store the payload normally and mark
the buffer as erroneous. If the no_drop module parameter is set to 1 the
buffer will then be passed to userspace, and tt will then be up to the
application to decide what to do with the buffer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The function is not used outside of its compilation unit. Make it
static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in
the device IDs list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The macros are defined in both drivers/media/video/uvc/uvc_video.c and
include/linux/usb/video.h. Remove definitions from the former.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Turn streaming off (by selecting alternate setting 0) and disable the
video buffers queue in the uvc_video_enable() error path.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Replace the current video buffers queue implementation with
videobuf2-vmalloc.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add mem, length and bytesused fields to the uvc_buffer structure and use
them instead of accessing the uvc_buffer::buf m.offset, length and
bytesused fields directly. This prepares the driver to the conversion to
videobuf2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The ati_remote driver currently uses 2-byte scancodes. However, one of
those bytes is actually a checksum and therefore shouldn't be considered
as part of the scancode.
Fix the driver to only use the actual data byte as a scancode and to
check the checksum itself. Update the bundled keymaps accordingly.
Since ati_remote was only migrated to the rc subsystem for 3.2, the
previous scancodes weren't emitted on any stable kernel.
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Checking for &dev->int_in is useless because it returns the address of
the embedded struct tm6000_endpoint, which will always be positive and
therefore true.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Function parameters on subsequent lines should never be aligned with the
function name but rather be indented.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The original patch used the fast USB quirk to enable fast access to
registers in the tm6000_read_write_usb(). The applied patch moved the
check to the tm6000_reset(), probably due to some merge conflicts.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Improve the use of the WARN_ON() macro and use a local variable, instead
of reduntantly dereferencing a pointer in v4l2-dev.c
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Otherwise compilation breaks with:
...
after apparently no longer included recursively from other header files.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
priv gets dereferenced in mt9t112_set_params() so we should return
before calling that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On 64-bit platforms assigning a pointer to a 32-bit variable causes a
compiler warning and cannot actually work. Soc-camera currently doesn't
support any 64-bit systems, but such platforms can be added in the
and in any case compiler warnings should be avoided.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adjustment of the colors by the po2030n is finer than by the bridge controls.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The 'open-drain' mode was not reset when starting the webcams.
This problem was introduced by commit 0e4d413af1 and
its exact effects are unknown.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As the alternate settings are now sorted in gspca main,
the variable 'nbalt' is no more useful.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The alternate settings are now sorted in gspca main, so the flag
'reverse_alts' is no more useful.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If there are two or more different it913x devices on the system they share the same
ite_config and over write its settings.
To over come this, the ite_config is copied to the priv area.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This a bus repeater for it913x devices. Commands usually fail because of other
activity on the USB bus.
Bulk failures that report -ETIMEDOUT or -EBUSY are repeated.
Enpoints that return actlen not equal len request -EAGAIN.
The retry is set at 10.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch is against the mainline v3.1 release (c3b92c8) and
fixes a compile error when building for OMAP3+DSS+VOUT
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support add for IT9135 9005 devices
With this patch IT9135 devices now move to using
dvb-usb-it9135-01.fw firmware
IT9137 remain on previous firmware.
IT9135 devices seem more stable on this firmware.
If the user wishes to remain on it9137 firmware they can change
back using firmware=1 module option.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Multi firmware loader
This uses scatter write firmware headers
The firmware must start with 03 XX 00
and be the extract firmware length.
I have tried all available firmwares with this loader.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for NEC extended keys.
The default remote has now changed to RC_MAP_MSI_DIGIVOX_III
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There appears to be differences in the tuner registers
on earlier IT9135 devices.
Using the current IT9137 settings cause corruptions on
some channels
This patch is in preparation for multi firmware loading and
current unsupported types.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The msg->command field is 32 bits, and we should fill it with a call
to cpu_to_le32(). The current code is broke on big endian systems.
On little endian systems it truncates the 32 bit value to 16 bits
which probably still works fine.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
More debugging and user info from it913x-fe.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Previously endpoint had been aligned to packet size (128)
Some early it9135 devices appear to have problems with this.
This patch now aligns with mpeg TS size (188)
With the pid filter off max size is increased to the maxmium
size (348 * 188)
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The DRX-K doesn't change the delivery system at set_properties,
but do it at frontend init. This causes problems on programs like
w_scan that, by default, opens both frontends.
Instead, explicitly set the format when set_parameters callback is
called.
Tested-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Likely misuse of & vs &&.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While xc5000 supports 7MHz bandwidth, the driver were lacking the code
implementing this feature, causing tuning issues with VHF chanels
used in Countries like Italy.
After this patch:
>>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0d49: pmt_pid 0x0102 RAI -- Rai 1 (running)
0x0000 0x0d4a: pmt_pid 0x0101 RAI -- Rai 2 (running)
0x0000 0x0d4b: pmt_pid 0x0100 RAI -- Rai 3 TGR Veneto (running)
0x0000 0x0d53: pmt_pid 0x0118 RAI -- Rai News (running)
0x0000 0x0d54: pmt_pid 0x0119 Rai -- Rai 3 TGR Emilia Romagna (running)
0x0000 0x0d4c: pmt_pid 0x0103 Rai -- Rai Radio1 (running)
0x0000 0x0d4d: pmt_pid 0x0104 Rai -- Rai Radio2 (running)
0x0000 0x0d4e: pmt_pid 0x0105 Rai -- Rai Radio3 (running)
Network Name 'Rai'
Tested-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
omap_vout crashes on start if a corresponding driver is not loaded for a
display device.
This patch changes omap_vout init sequence to skip devices without a
driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by Devin Heitmueller <dheitmueller@kernellabs.com>:
> It seems like a change such as this could significantly change the
> timing of tuner initialization if you have multiple xc5000 based
> products that might have a slow i2c bus. Was that intentional?
After discussed with Eddi de Pierri <eddi@depieri.net>, it was pointed that
the change was not intentional, and it was just a trial while developing
the patches that add support for HVR-930C.
So, remove this hack.
Reported-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Acked by: Eddi de Pierri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
All devices should support alsa module. Devices with DVB will
auto-load the dvb module. This way, tm6000-based devices should
now have hot plugin.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that the tm6000 driver is on a good shape, we can enable
device autodetection, based on the USB ID.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The IR support were broken on my tests with HVR-900H. Also,
there were several issues on the current implementation.
This patch is a major rewrite of the IR support for this
- Improve debug messages;
- Don't do polling for interrrupt based IR;
- Add proper support for RC-5 protocol;
- Always provide 16 bits for NEC and RC-5;
- Fix polling code;
- Split polling functions from URB Interrupt ones;
- Don't hardcode the XTAL reference for tm6000 IR;
- If a URB submit fails, retries after 100ms;
- etc.
Tested on Hauppauge HVR-900H, with RC-5 and NEC remotes.
Issues on IR handling, on this device:
- Repeat events aren't detected (neither on NEC or RC-5);
- NEC codes are always provided with 16 bits.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
IR registers 0xd9 to 0xdf were badly named, making harder to
check what's the register accessed at the RC code. Fix the
name convention.
No functional changes on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
beholder use a map with 3 bytes, but many rc maps have 2 bytes, so I add a workaround for beholder rc.
Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A V4L2 standards mask may contain several standards. A more restricted
mask with just one standard is used when user needs to bind to an specific
standard that can't be auto-detect among a more generic mask.
So, Improve the autodetection logic to detect the correct audio standard
most of the time.
Based on a patch made by Dmitri Belimov <d.belimov@gmail.com>.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are some properties found on em28xx, but not on tm6000. Add
them, in order to be more consistent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Otherwise compilation breaks with:
...
after apparently no longer included recursively from other header files.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We pass this to fm_tx_set_radio_text() which expects a NUL terminated
string.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch fixes following build break:
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In case pixel format is modified in set_fmt by the driver,
the changes are not propagated back to the caller. Fix this
by adjusting passed data for TRY and ACTIVE format.
Also remove redundant pixel format code information from
struct m5mols_info, it's already available in 'ffmt' array.
Remove pad number validation in set/get_fmt, this is already
done in the core.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
With 16-bit RGB565 colour format pixels are stored by the device in memory
in the following order:
| b3 | b2 | b1 | b0 |
~+-----+-----+-----+-----+
| R5 G6 B5 | R5 G6 B5 |
This corresponds to V4L2_PIX_FMT_RGB565 fourcc, not V4L2_PIX_FMT_RGB565X.
This change is required to avoid trouble when setting up video pipeline
with the s5p-tv devices, so the colour formats at both devices can be
properly matched.
Cc: <stable@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When a sensor with MIPI-CSI interface is attached through platform
data definition and the MIPI-CSI receiver is not selected in kernel
configuration s5p-fimc driver probe() will now succeed, issuing only
a warning. It was done this way to allow the driver to work even if
system configuration is not exactly right.
Instead make the driver's probe() fail if a MIPI-CSI sensor was
requested but s5p-csis module is not present.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Minimum vertical pixel size alignment for input and output DMA and
the scaler depend on color format, rotation, the IP instance and revision.
Make vertical pixel size of format and crop better fit for each SoC
revision and the IP instance by adding min_vsize_align attribute to
the FIMC variant data structure. It's now common for the DMA engines
and the scaler.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The "s5p-fimc-md" platform device platform_data is used to pass
attached camera sensor data. Not allowing device probe() to succeed
when it's null prevents using FIMC as a mem-to-mem device only.
Fix this by removing the platform_data check against null and
registering sensors only if platform_data is specified.
Also add logging of the information which /dev/video is assigned
to which device during probe().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When requested more than 2 buffers the buffer dequeue order was wrong
due to erroneous updating FIMC registers in every interrupt handler
call. This also fixes regression of resetting the output DMA buffer
pointer at wrong time, when some buffers are already queued in hardware.
The hardware is reset in the start_streaming callback in order to align
the H/W state with the software output buffer pointer (buf_index).
Additionally a simple write to S5P_CISCCTRL register is replaced with
a read/modification/write to make sure the scaler is not being disabled
in fimc_hw_set_scaler().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
ST_LPM bit must not be initially set, so the first resume helper
call properly quiesce the device's operation.
Also fimc_runtime_suspend() at device remove is unneeded and
leads to unbalanced clock disable so remove it.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make sure the subdev pointer is cleared when the subdev object
has been freed.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After i2c_unregister_device() has been called the client object can already
be freed and thus using the client pointer may lead to dereferencing freed
memory. Avoid this by saving the adapter pointer for further use before
i2c_unregister_device() call.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The intend of this patch is to limit the maximum I2C speed.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The intend of this patch is to add the support for the DiBcom reference
board TFE8096P.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The purpose of this patch is to support the DiBcom chip dib8096P.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The intend of this patch is to add the support for the DiBcom reference
board TFE7790E.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patches improves the tuning of the dib8000 and correct the monitoringr
of the SNR.The patch allows to faster detect that there is no ISDB-T channel
on the wanted frequency.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The intend of this patch is to correct some warnings given.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The intend of this patch is to add the support for the DiBcom reference
board TFE7090E.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch intends to update the dib7000p and dib0090 driver in order to
improve the performances.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Line up constant defines to the same column.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix indent of statements to improve readability.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move operator in complex expression to the end of the line to preserve
consistency.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change multiple definitions in one statement into multiple statements
with one definition per statement.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change double assignment in one statement into two assignment
statements.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change double spaces between lexemes into single spaces.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change indent of statements to use tabs and to improve readability.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Delete curly braces around single if-else statements.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove unnecessary curly braces around single if statement.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move operators in complex expressions to the end of the lines to
preserve consistency.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change indent of statements with (less than 8) spaces to indent with
tabs.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Line up comments to match indent of surrounding statements.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change obscure line endings to less obscure ones. (improve readability)
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Plase operators in complex expressions at the end of the lines to
preserve consistency.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Delete part of the comment that is not checked in code.
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
