Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.
But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch makes the event files, set_event and available_events
aware of the subsystem.
Now you can enable an entire subsystem with:
echo 'irq:*' > set_event
Note: the '*' is not needed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If a trace point header defines TRACE_SYSTEM, then it will add the
following trace points into that event system.
If include/trace/irq_event_types.h has:
#define TRACE_SYSTEM irq
at the top and
#undef TRACE_SYSTEM
at the bottom, then a directory "irq" will be created in the
/debug/tracing/events directory. Inside that directory will contain the
two trace points that are defined in include/trace/irq_event_types.h.
Only adding the above to irq and not to sched, we get:
# ls /debug/tracing/events/
irq sched_process_exit sched_signal_send sched_wakeup_new
sched_kthread_stop sched_process_fork sched_switch
sched_kthread_stop_ret sched_process_free sched_wait_task
sched_migrate_task sched_process_wait sched_wakeup
# ls /debug/tracing/events/irq
irq_handler_entry irq_handler_exit
If we add #define TRACE_SYSTEM sched to the trace/sched_event_types.h
then the rest of the trace events will be put in a sched directory
within the events directory.
I've been playing with this idea of the subsystem for a while, but
recently Tom Zanussi posted some patches to lkml that included this
method. Tom's approach was clean and got me to finally put some effort
to clean up the event trace points.
Thanks to Tom Zanussi for demonstrating how nice the subsystem
method is.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
To further facilitate the ease of adding trace points for developers, this
patch creates include/trace/trace_events.h and
include/trace/trace_event_types.h.
The former file will hold the trace/<type>.h files and the latter will hold
the trace/<type>_event_types.h files.
To create new tracepoints and to have them automatically
appear in the event tracer, a developer makes the trace/<type>.h file
which includes <linux/tracepoint.h> and the trace/<type>_event_types.h file.
The trace/<type>_event_types.h file will hold the TRACE_FORMAT
macros.
Then add the trace/<type>.h file to trace/trace_events.h,
and add the trace/<type>_event_types.h to the trace_event_types.h file.
No need to modify files elsewhere.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
kcalloc is a better approach to allocate a NULL array.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix compile warning and clean up
When I first wrote __tracing_open, instead of passing the error
code via the ERR_PTR macros, I lazily used a separate parameter
to hold the return for errors.
When Frederic Weisbecker updated that function, he used the Linux
kernel ERR_PTR for the returns. This caused the parameter return
to possibly not be initialized on error. gcc correctly pointed this
out with a warning.
This patch converts the entire function to use the Linux kernel
ERR_PTR macro methods.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to possible race conditions
There's some uses of current_tracer that is not protected by the
trace_types_lock. There is a small chance that a sysadmin changes
the tracer while the current_tracer is being referenced.
If the race is hit, it is unlikely to cause any harm since the
tracers are constant and are not freed. But some strang side
effects may occur.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds the tracer dependent options dynamically to the
options directory when the tracer is activated. These options are
removed when the tracer is deactivated.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates an options directory in the debugfs, that contains
the available tracing options. These files contain 1 or 0, where 1
is the option is enabled and 0 it is disabled.
Simply echoing in 1 will enable the option and 0 will disable it.
This patch only contains the core options, not the tracer options.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Allow CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures to still specify
that their sched_clock() implementation is reliable.
This will be used by x86 to switch on a faster sched_clock_cpu()
implementation on certain CPU types.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: implement new tracing timestamp APIs
Add three trace clock variants, with differing scalability/precision
tradeoffs:
- local: CPU-local trace clock
- medium: scalable global clock with some jitter
- global: globally monotonic, serialized clock
Make the ring-buffer use the local trace clock internally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
make sure we dont execute more complex sched_clock() code in NMI context.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new tracepoints
Add them to the generic IRQ code, that way every architecture
gets these new tracepoints, not just x86.
Using Steve's new 'TRACE_FORMAT', I can get function graph
trace as follows using the original two IRQ tracepoints:
3) | handle_IRQ_event() {
3) | /* (irq_handler_entry) irq=28 handler=eth0 */
3) | e1000_intr_msi() {
3) 2.460 us | __napi_schedule();
3) 9.416 us | }
3) | /* (irq_handler_exit) irq=28 handler=eth0 return=handled */
3) + 22.935 us | }
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure the VFS layout of per CPU trace buffers
The per cpu trace files are all in a single directory:
/debug/tracing/per_cpu. In case of a large number of cpu, the
content of this directory becomes messy so we create now one
directory per cpu inside /debug/tracing/per_cpu which contain
each their own trace_pipe and trace files.
Ie:
/debug/tracing$ ls -R per_cpu
per_cpu:
cpu0 cpu1
per_cpu/cpu0:
trace trace_pipe
per_cpu/cpu1:
trace trace_pipe
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should
be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it
TRACE_FORMAT.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.
Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.
Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.
The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.
The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.
Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: split up tracing output per cpu
Currently, on the tracing debugfs directory, three files are
available to the user to let him extracting the trace output:
- trace is an iterator through the ring-buffer. It's a reader
but not a consumer It doesn't block when no more traces are
available.
- trace pretty similar to the former, except that it adds more
informations such as prempt count, irq flag, ...
- trace_pipe is a reader and a consumer, it will also block
waiting for traces if necessary (heh, yes it's a pipe).
The traces coming from different cpus are curretly mixed up
inside these files. Sometimes it messes up the informations,
sometimes it's useful, depending on what does the tracer
capture.
The tracing_cpumask file is useful to filter the output and
select only the traces captured a custom defined set of cpus.
But still it is not enough powerful to extract at the same time
one trace buffer per cpu.
So this patch creates a new directory: /debug/tracing/per_cpu/.
Inside this directory, you will now find one trace_pipe file and
one trace file per cpu.
Which means if you have two cpus, you will have:
trace0
trace1
trace_pipe0
trace_pipe1
And of course, reading these files will have the same effect
than with the usual tracing files, except that you will only see
the traces from the given cpu.
The original all-in-one cpu trace file are still available on
their original place.
Until now, only one consumer was allowed on trace_pipe to avoid
racy consuming on the ring-buffer. Now the approach changed a
bit, you can have only one consumer per cpu.
Which means you are allowed to read concurrently trace_pipe0 and
trace_pipe1 But you can't have two readers on trace_pipe0 or
trace_pipe1.
Following the same logic, if there is one reader on the common
trace_pipe, you can not have at the same time another reader on
trace_pipe0 or in trace_pipe1. Because in trace_pipe is already
a consumer in all cpu buffers in essence.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove old debug/tracing API
/debug/tracing/latency_trace is an old legacy format we kept from
the old latency tracer. Remove the file for now. If there's any
useful bit missing then we'll propagate any useful output bits into
the /debug/tracing/trace output.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix CPU hotplug lockup
bts_hotcpu_handler() is called with irqs disabled, so using mutex_lock()
is a no-no.
All the BTS codepaths here are atomic (they do not schedule), so using
a spinlock is the right solution.
Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the directory /debug/tracing/events/ that will contain
all the registered trace points.
# ls /debug/tracing/events/
sched_kthread_stop sched_process_fork sched_switch
sched_kthread_stop_ret sched_process_free sched_wait_task
sched_migrate_task sched_process_wait sched_wakeup
sched_process_exit sched_signal_send sched_wakeup_new
# ls /debug/tracing/events/sched_switch/
enable
# cat /debug/tracing/events/sched_switch/enable
1
# cat /debug/tracing/set_event
sched_switch
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT
such that they are automatically registered with the event tracer.
And it also adds the tracing sched headers to kernel/trace/events.c
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates the event tracing infrastructure of ftrace.
It will create the files:
/debug/tracing/available_events
/debug/tracing/set_event
The available_events will list the trace points that have been
registered with the event tracer.
set_events will allow the user to enable or disable an event hook.
example:
# echo sched_wakeup > /debug/tracing/set_event
Will enable the sched_wakeup event (if it is registered).
# echo "!sched_wakeup" >> /debug/tracing/set_event
Will disable the sched_wakeup event (and only that event).
# echo > /debug/tracing/set_event
Will disable all events (notice the '>')
# cat /debug/tracing/available_events > /debug/tracing/set_event
Will enable all registered event hooks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Fix an invalid memory reference problem when cpu hotplug support is
disabled and the hw-branch-tracer is set as current tracer.
Initializing the tracer calls bts_trace_init() which has already
been freed at this time.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the sysdev_suspend/resume from the callee to the callers, with
no real change in semantics, so that we can rework the disabling of
interrupts during suspend/hibernation.
This is based on an earlier patch from Linus.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hibernate:
PM: Fix suspend_console and resume_console to use only one semaphore
PM: Wait for console in resume
PM: Fix pm_notifiers during user mode hibernation
swsusp: clean up shrink_all_zones()
swsusp: dont fiddle with swappiness
PM: fix build for CONFIG_PM unset
PM/hibernate: fix "swap breaks after hibernation failures"
PM/resume: wait for device probing to finish
Consolidate driver_probe_done() loops into one place
This fixes a race where a thread acquires the console while the
console is suspended, and the console is resumed before this
thread releases it. In this case, the secondary console
semaphore would be left locked, and the primary semaphore would
be released twice. This in turn would cause the console switch
on suspend or resume to hang forever.
Note that suspend_console does not actually lock the console
for clients that use acquire_console_sem, it only locks it for
clients that use try_acquire_console_sem. If we change
suspend_console to fully lock the console, then the kernel
may deadlock on suspend. One client of try_acquire_console_sem
is acquire_console_semaphore_for_printk, which uses it to
prevent printk from using the console while it is suspended.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoids later waking up to a blinking cursor if the device woke up and
returned to sleep before the console switch happened.
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig
resume. Make sure we also call notifiers with correct parameter telling
them what we are really doing.
Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken
config dependncies. Fix that.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the resume code does not currently wait for device probing to finish.
Even without async function calls this is dicey and not correct,
but with async function calls during the boot sequence this is going
to get hit more...
This patch adds the synchronization using the newly introduced helper.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: added precaution on failure detection
Break out of the modifying loop as soon as a failure is detected.
This is just an added precaution found by code review and was not
found by any bug chasing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates the weak functions: ftrace_arch_code_modify_prepare
and ftrace_arch_code_modify_post_process that are called before and
after the stop machine is called to modify the kernel text.
If the arch needs to do pre or post processing, it only needs to define
these functions.
[ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_*
over using ftrace_arch_modify_* ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: trace only functions matching a pattern
The set_graph_function file let one to trace only one or several
chosen functions and follow all their code flow.
Currently, only a constant function name is allowed so this patch
allows the ftrace_regex functions:
- matches all functions that end with "name":
echo *name > set_graph_function
- matches all functions that begin with "name":
echo name* > set_graph_function
- matches all functions that contains "name":
echo *name* > set_graph_function
Example:
echo mutex* > set_graph_function
0) | mutex_lock_nested() {
0) 0.563 us | __might_sleep();
0) 2.072 us | }
0) | mutex_unlock() {
0) 1.036 us | __mutex_unlock_slowpath();
0) 2.433 us | }
0) | mutex_unlock() {
0) 0.691 us | __mutex_unlock_slowpath();
0) 1.787 us | }
0) | mutex_lock_interruptible_nested() {
0) 0.548 us | __might_sleep();
0) 1.945 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: limit the number of loops the ring buffer self test can make
tracing: have function trace select kallsyms
tracing: disable tracing while testing ring buffer
tracing/function-graph-tracer: trace the idle tasks
Impact: prevent deadlock if ring buffer gets corrupted
This patch adds a paranoid check to make sure the ring buffer consumer
does not go into an infinite loop. Since the ring buffer has been set
to read only, the consumer should not loop for more than the ring buffer
size. A check is added to make sure the consumer does not loop more than
the ring buffer size.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix output of function tracer to be useful
The function tracer is pretty useless if KALLSYMS is not configured.
Unless you are good at reading hex values, the function tracer should
select the KALLSYMS configuration.
Also, the dynamic function tracer will fail its self test if KALLSYMS
is not selected.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to prevent hard lockup on self tests
If one of the tracers are broken and is constantly filling the ring
buffer while the test of the ring buffer is running, it will hang
the box. The reason is that the test is a consumer that will not
stop till the ring buffer is empty. But if the tracer is broken and
is constantly producing input to the buffer, this test will never
end. The result is a lockup of the box.
This happened when KALLSYMS was not defined and the dynamic ftrace
test constantly filled the ring buffer, because the filter failed
and all functions were being traced. Something was being called
that constantly filled the buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
block: fix booting from partitioned md array
block: revert part of 18ce3751cc
cciss: PCI power management reset for kexec
paride/pg.c: xs(): &&/|| confusion
fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free
block: fix bad definition of BIO_RW_SYNC
bsg: Fix sense buffer bug in SG_IO
