* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
doc: fix typo in comment explaining rb_tree usage
Remove fs/ntfs/ChangeLog
doc: fix console doc typo
doc: cpuset: Update the cpuset flag file
Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
Remove drivers/parport/ChangeLog
Remove drivers/char/ChangeLog
doc: typo - Table 1-2 should refer to "status", not "statm"
tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
devres/irq: Fix devm_irq_match comment
Remove reference to kthread_create_on_cpu
tree-wide: Assorted spelling fixes
tree-wide: fix 'lenght' typo in comments and code
drm/kms: fix spelling in error message
doc: capitalization and other minor fixes in pnp doc
devres: typo fix s/dev/devm/
Remove redundant trailing semicolons from macros
fix typo "definetly" -> "definitely" in comment
tree-wide: s/widht/width/g typo in comments
...
Fix trivial conflict in Documentation/laptops/00-INDEX
scripts/kernel-doc mishandles a function that has a multi-line function
short description and no function parameters. The observed problem was
from drivers/scsi/scsi_netlink.c:
/**
* scsi_netlink_init - Called by SCSI subsystem to intialize
* the SCSI transport netlink interface
*
**/
kernel-doc treated the " * " line as a Description: section with only a
newline character in the Description contents. This caused
output_highlight() to complain: "output_highlight got called with no
args?", plus produce a perl call stack backtrace.
The fix is just to ignore Description sections if they only contain "\n".
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on Arjan's suggestion, extend the list of ops structures that should
be const.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a small code snippet, which will be complained about by
checkpatch.pl:
#define __STRUCT_KFIFO_COMMON(recsize, ptrtype) \
union { \
struct { \
unsigned int in; \
unsigned int out; \
}; \
char rectype[recsize]; \
ptrtype *ptr; \
const ptrtype *ptr_const; \
};
This construct is legal and safe, so checkpatch.pl should accept this. It
should be also true for struct defined in a macro.
Add the `struct' and `union' keywords to the exceptions list of the
checkpatch.pl script, to prevent error message "Macros with multiple
statements should be enclosed in a do - while loop". Otherwise it is not
possible to build a struct or union with a macro.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch falsely complained about '__initconst' because it thought the
'const' needed a space before. Fix this by changing the list of
attributes:
- add '__initconst'
- force plain 'init' to contain a word-boundary at the end
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case if the statement and the conditional are in one line, the line
appears in the report doubly.
And items of this check have no blank line before the next item.
This patch fixes these trivial problems, to improve readability of the
report.
[sample.c]
> if (cond1
> && cond2
> && cond3) func_foo();
>
> if (cond4) func_bar();
Before:
> ERROR: trailing statements should be on next line
> #1: FILE: sample.c:1:
> +if (cond1
> [...]
> + && cond3) func_foo();
> ERROR: trailing statements should be on next line
> #5: FILE: sample.c:5:
> +if (cond4) func_bar();
> +if (cond4) func_bar();
> total: 2 errors, 0 warnings, 5 lines checked
After:
> ERROR: trailing statements should be on next line
> #1: FILE: sample.c:1:
> +if (cond1
> [...]
> + && cond3) func_foo();
>
> ERROR: trailing statements should be on next line
> #5: FILE: sample.c:5:
> +if (cond4) func_bar();
>
> total: 2 errors, 0 warnings, 5 lines checked
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sizeof(&foo) is frequently an error. Warn on its use.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If MAINTAINERS section entries are misformatted, it was possible to have
an infinite loop.
Correct the defect by always moving the index to the end of section + 1
Also, exit check for exclude as soon as possible.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Picky mail systems won't accept email addresses where recipient has period
in name; ie. David S. Miller <davemloft.net> will not work.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perlcritic is a standard checker for Perl Best Practices. This patch
fixes most of the warnings in the get_maintainer script. If kernel
programmers are going to have checkpatch they should write clean scripts
as well...
Bareword file handle opened at line 176, column 1. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 176, column 1. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 207, column 5. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 207, column 5. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 246, column 6. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 246, column 6. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 258, column 2. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 258, column 2. See page 207 of PBP. (Severity: 5)
Expression form of "eval" at line 983, column 17. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 985, column 17. See page 161 of PBP. (Severity: 5)
Subroutine prototypes used at line 1186, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 1206, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doesn't need or accept '-' as a trailing option to read stdin. Doesn't
print usage() after bad options. Adds --usage as command line equivalent
of --help
Suggested-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an imperfect option to search a source file for email addresses.
New option: --file-emails or --fe
email addresses in files are freeform text and are nearly impossible to
parse. Still, might as well try to do a somewhat acceptable job of
finding them. This code should find all addresses that are in the form
addr@domain.tld
The code assumes that up to 3 alphabetic words along with dashes, commas,
and periods that preceed the email address are a name.
If 3 words are found for the name, and one of the first two words are a
single letter and period, or just a single letter then the 3 words are use
as name otherwise the last 2 words are used.
Some variants that are shown correctly:
John Smith <jksmith@domain.org>
Random J. Developer <rjd@tld.com>
Random J. Developer (rjd@tld.com)
J. Random Developer rjd@tld.com
Variants that are shown nominally correctly:
Written by First Last (funny-addr@somecompany.com)
is shown as:
First Last <funny-addr@somecompany.com>
Variants that are shown incorrectly:
Some Really Long Name <srln@foo.bar>
MontaVista Software, Inc. <source@mvista.com>
are returned as:
Long Name <srln@foo.bar>
"Software, Inc" <source@mvista.com>
--roles and --rolestats show "(in file)" for matches.
For instance:
Without -file-emails:
$ ./scripts/get_maintainer.pl -f -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
linux-kernel@vger.kernel.org (open list)
With -fe:
$ ./scripts/get_maintainer.pl -f -fe -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
Matt Mackall <mpm@selenic.com> (in file)
Ingo Molnar <mingo@redhat.com> (in file)
linux-kernel@vger.kernel.org (open list)
netdev@vger.kernel.org (open list:NETWORKING [GENERAL])
The number of email addresses in the file in not limited. Neither is the
number of returned email addresses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
ftrace: Add function names to dangling } in function graph tracer
tracing: Simplify memory recycle of trace_define_field
tracing: Remove unnecessary variable in print_graph_return
tracing: Fix typo of info text in trace_kprobe.c
tracing: Fix typo in prof_sysexit_enable()
tracing: Remove CONFIG_TRACE_POWER from kernel config
tracing: Fix ftrace_event_call alignment for use with gcc 4.5
ftrace: Remove memory barriers from NMI code when not needed
tracing/kprobes: Add short documentation for HAVE_REGS_AND_STACK_ACCESS_API
s390: Add pt_regs register and stack access API
tracing/kprobes: Make Kconfig dependencies generic
tracing: Unify arch_syscall_addr() implementations
tracing: Add notrace to TRACE_EVENT implementation functions
ftrace: Allow to remove a single function from function graph filter
tracing: Add correct/incorrect to sort keys for branch annotation output
tracing: Simplify test for function_graph tracing start point
tracing: Drop the tr check from the graph tracing path
tracing: Add stack dump to trace_printk if stacktrace option is set
tracing: Use appropriate perl constructs in recordmcount.pl
tracing: optimize recordmcount.pl for offsets-handling
...
I also found the -filelist option, but apparently the implementation
is broken, and it was broken from the very first git commit.
For the -filelist option I suggest the removal (I wasn't able to find
any users of it, moreover it's not even listed in the
usage() output, so presumably nobody knows about it).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem is that $. keeps track of the current record number (which
is line number by default). But if you pass it multiple files, it does
not wrap at the end of file, and therefore contains the *total* number
of processed lines.
I suppose we can fix line numbering by introducing a simple assignment
$. = 1
before processing every new file.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
kconfig: Simplify LSMOD= handling
kconfig: Add LSMOD=file to override the lsmod for localmodconfig
kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl
kconfig: Check for if conditions in Kconfig for localmodconfig
kconfig: Create include/generated for localmodconfig
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
LKML-Reference: <20100203162014.GA10956@sepie.suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing the following:
make LSMOD=file localmodconfig
Will make the streamline-config code use the given file instead of
lsmod. If the file is an executable, it will execute it, otherwise
it will read it as text.
make LSMOD=/my/local/path/lsmod localmodconfig
The above will execute the lsmod in /my/local/path instead of the
lsmods that may be located elsewhere.
make LSMOD=embedded_board_lsmod localmodconfig
The above will read the "embedded_board_lsmod" as a text file. This
is useful if you are doing a cross compile and need to run the
config against modules that exist on an embedded device.
Note, if the LSMOD= file does is not a path, it will add the
path to the object directory. That is, the above example will look
for "embedded_board_lsmod" in the directory that the binary will
be built in (the O=dir directory).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On branch config/linus
When I use markup_oops.pl parse a x8664 oops, I got:
objdump: --start-address: bad number: NaN
No matching code found
This is because:
main::(./m.pl:228): open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
DB<3> p $decodestart
NaN
This NaN is from:
main::(./m.pl:176): my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
DB<2> p $func_offset
0x175
There is already a "0x" in $func_offset, another 0x makes it a NaN.
The $func_offset is from line:
if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)".
Signed-off-by: Hui Zhu <teawater@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When git has been set to always use color in .gitconfig then I get the
warning message
Bad divisor in main::vcs_assign: 0
This is caused by vcs_file_signoffs not matching any commits due to the
pattern not understand the colour codes. Fix this by telling git log to
never use colour.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Distributions now have lsmod in /bin instead of /sbin. But to handle
both cases, we look for it in /sbin /bin /usr/bin and /usr/sbin.
If lsmod is not found in any of those paths, it defaults to use
just lsmod and hopes that it lies in the path of the user.
Tested-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The sym_is() compares a symbol in an attempt to automatically skip symbol
prefixes. It does this first by searching the real symbol with the normal
unprefixed symbol. But then it uses the length of the original symbol to
check the end of the substring instead of the length of the symbol it is
looking for. On non-prefixed arches, this is effectively the same thing,
so there is no problem. On prefixed-arches, since this is exceeds by just
one byte, a crash is rare and it is usually a NUL byte anyways. But every
once in a blue moon, you get the right page alignment and it segfaults.
For example, on the Blackfin arch, sym_is() will be called with the real
symbol "___mod_usb_device_table" as "symbol" when looking for the normal
symbol "__mod_usb_device_table" as "name". The substring will thus return
one byte into "symbol" and store it into "match". But then "match" will
be indexed with the length of "symbol" instead of "name" and so we will
exceed the storage. i.e. the code ends up doing:
char foo[] = "abc"; return foo[strlen(foo)+1] == '\0';
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing/filters: Add comment for match callbacks
tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
lib: Introduce strnstr()
tracing/filters: Fix MATCH_END_ONLY filter matching
tracing/filters: Fix MATCH_FRONT_ONLY filter matching
ftrace: Fix MATCH_END_ONLY function filter
tracing/x86: Derive arch from bits argument in recordmcount.pl
ring-buffer: Add rb_list_head() wrapper around new reader page next field
ring-buffer: Wrap a list.next reference with rb_list_head()
When I try to use markup_oops.pl in x86, I always get:
cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found
This is because in line:
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
$func_offset will get a number like "0x2"
But in follow code:
my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");
It add other ox to ox2. Then this value will be set to NaN.
So I made a small patch to fix it.
Signed-off-by: Hui Zhu <teawater@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In an x86 build with CONFIG_KERNEL_LZMA enabled and dash as sh,
arch/x86/boot/compressed/vmlinux.bin.lzma ends with
'\xf0\x7d\x39\x00' (16 bytes) instead of the 4 bytes intended and
the resulting vmlinuz fails to boot. This improves on the
previous behavior, in which the file contained the characters
'-ne ' as well, but not by much.
Previous commits replaced "echo -ne" first with "/bin/echo -ne",
then "printf" in the hope of improving portability, but none of
these commands is guaranteed to support hexadecimal escapes on
POSIX systems. So use the shell to convert from hexadecimal to
octal.
With this change, an LZMA-compressed kernel built with dash as sh
boots correctly again.
Reported-by: Sebastian Dalfuß <sd@sedf.de>
Reported-by: Oliver Hartkopp <oliver@hartkopp.net>
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alek Du <alek.du@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Maybe this will stop people emailing me about it.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let the arch argument be overruled by bits. Otherwise, building of
external modules against a i386 target on a x86-64 host (and likely vice
versa as well) fails unless ARCH=i386 is explicitly passed to make.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
LKML-Reference: <4B4AFE10.8050109@siemens.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The following command doesn't generate any output.
`./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c`
An excluded "X:" pattern match in any section would cause a file not to
match any other section.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series adds generic support for creating and extracting
LZO-compressed kernel images, as well as support for using such images on
the x86 and ARM architectures, and support for creating and using
LZO-compressed initrd and initramfs images.
Russell King said:
: Testing on a Cortex A9 model:
: - lzo decompressor is 65% of the time gzip takes to decompress a kernel
: - lzo kernel is 9% larger than a gzip kernel
:
: which I'm happy to say confirms your figures when comparing the two.
:
: However, when comparing your new gzip code to the old gzip code:
: - new is 99% of the size of the old code
: - new takes 42% of the time to decompress than the old code
:
: What this means is that for a proper comparison, the results get even better:
: - lzo is 7.5% larger than the old gzip'd kernel image
: - lzo takes 28% of the time that the old gzip code took
:
: So the expense seems definitely worth the effort. The only reason I
: can think of ever using gzip would be if you needed the additional
: compression (eg, because you have limited flash to store the image.)
:
: I would argue that the default for ARM should therefore be LZO.
This patch:
The lzo compressor is worse than gzip at compression, but faster at
extraction. Here are some figures for an ARM board I'm working on:
Uncompressed size: 3.24Mo
gzip 1.61Mo 0.72s
lzo 1.75Mo 0.48s
So for a compression ratio that is still relatively close to gzip, it's
much faster to extract, at least in that case.
This part contains:
- Makefile routine to support lzo compression
- Fixes to the existing lzo compressor so that it can be used in
compressed kernels
- wrapper around the existing lzo1x_decompress, as it only extracts one
block at a time, while we need to extract a whole file here
- config dialog for kernel compression
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modified recordmcount.pl to use perl constructs that are still
understandable by C hackers that are not perl programmers.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
LKML-Reference: <1262724082-9517-1-git-send-email-w.sang@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The streamline_config.pl misses the if conditions for checking
dependencies. For Kconfigs with the following construct:
if MEDIA_SUPPORT
config VIDEO_DEV
[...]
If VIDEO_DEV was enabled, the script will miss the fact that MEDIA_SUPPORT
is also needed.
This patch changes streamline_config.pl to include if conditions into
the dependencies of configs.
Reported-by: Anton Blanchard <anton@sambo.org>
Tested-by: Anton Blanchard <anton@sambo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If someone downloads a brand new kernel and runs localmodconfig or
localyesconfig, the ending result will report:
*** Error during update of the kernel configuration.
This is because localmodconfig and localyesconfig must create the
include/generated directory to place the autoconf.h file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- move check for open file in front of the writing loop
- use perl-constructs to access the array
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
LKML-Reference: <1262716072-14414-2-git-send-email-w.sang@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits)
MIPS: Lasat: Fix botched changes to sysctl code.
RTC: rtc-cmos.c: Fix warning on MIPS
MIPS: Cleanup random differences beween lmo and Linus' kernel.
MIPS: No longer hardwire CONFIG_EMBEDDED to y
MIPS: Fix and enhance built-in kernel command line
MIPS: eXcite: Remove platform.
MIPS: Loongson: Cleanups of serial port support
MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer
MIPS: Excite: move iodev_remove to .devexit.text
MIPS: Lasat: Convert to proc_fops / seq_file
MIPS: Cleanup signal code initialization
MIPS: Modularize COP2 handling
MIPS: Move EARLY_PRINTK to Kconfig.debug
MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function
MIPS: Yeeloong 2F: Add LID open event as the wakeup event
MIPS: Yeeloong 2F: Add basic EC operations
MIPS: Move several variables from .bss to .init.data
MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address
MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5
MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer
...
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...
Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action . When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.
Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).
In the -v4 version, the implementation of this support is basically the same as
X86 version does: _mcount is implemented as an empty function and ftrace_caller
is implemented as a real tracing function respectively.
But in this version, to support module tracing with the help of
-mlong-calls in arch/mips/Makefile:
MODFLAGS += -mlong-calls.
The stuff becomes a little more complex. We need to cope with two
different type of calling to _mcount.
For the kernel part, the calling to _mcount(result of "objdump -hdr
vmlinux"). is like this:
108: 03e0082d move at,ra
10c: 0c000000 jal 0 <fpcsr_pending>
10c: R_MIPS_26 _mcount
10c: R_MIPS_NONE *ABS*
10c: R_MIPS_NONE *ABS*
110: 00020021 nop
For the module with -mlong-calls, it looks like this:
c: 3c030000 lui v1,0x0
c: R_MIPS_HI16 _mcount
c: R_MIPS_NONE *ABS*
c: R_MIPS_NONE *ABS*
10: 64630000 daddiu v1,v1,0
10: R_MIPS_LO16 _mcount
10: R_MIPS_NONE *ABS*
10: R_MIPS_NONE *ABS*
14: 03e0082d move at,ra
18: 0060f809 jalr v1
In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl, but in the module version, we need to choose
one of the two to match. Herein, I choose the first one with
"R_MIPS_HI16 _mcount".
and In the kernel verion, without module tracing support, we just need
to replace "jal _mcount" by "jal ftrace_caller" to do real tracing, and
filter the tracing of some kernel functions via replacing it by a nop
instruction.
but as we have described before, the instruction "jal ftrace_caller" only left
32bit length for the address of ftrace_caller, it will fail when calling from
the module space. so, herein, we must replace something else.
the basic idea is loading the address of ftrace_caller to v1 via changing these
two instructions:
lui v1,0x0
addiu v1,v1,0
If we want to enable the tracing, we need to replace the above instructions to:
lui v1, HI_16BIT_ftrace_caller
addiu v1, v1, LOW_16BIT_ftrace_caller
If we want to stop the tracing of the indicated kernel functions, we
just need to replace the "jalr v1" to a nop instruction. but we need to
replace two instructions and encode the above two instructions
oursevles.
Is there a simpler solution? Yes! Here it is, in this version, we put _mcount
and ftrace_caller together, which means the address of _mcount and
ftrace_caller is the same:
_mcount:
ftrace_caller:
j ftrace_stub
nop
...(do real tracing here)...
ftrace_stub:
jr ra
move ra, at
By default, the kernel functions call _mcount, and then jump to ftrace_stub and
return. and when we want to do real tracing, we just need to remove that "j
ftrace_stub", and it will run through the two "nop" instructions and then do
the real tracing job.
what about filtering job? we just need to do this:
lui v1, hi_16bit_of_mcount <--> b 1f (0x10000004)
addiu v1, v1, low_16bit_of_mcount
move at, ra
jalr v1
nop
1f: (rec->ip + 12)
In linux-mips64, there will be some local symbols, whose name are
prefixed by $L, which need to be filtered. thanks goes to Steven for
writing the mips64-specific function_regex.
In a conclusion, with RISC, things becomes easier with such a "stupid"
trick, RISC is something like K.I.S.S, and also, there are lots of
"simple" tricks in the whole ftrace support, thanks goes to Steven and
the other folks for providing such a wonderful tracing framework!
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: zhangfx@lemote.com
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/675/
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
modpost: fix segfault with short symbol names
module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
Kbuild: clear marker out of modpost
module: make MODULE_SYMBOL_PREFIX into a CONFIG option
ARM: unexport symbols used to implement floating point emulation
ARM: use unified discard definition in linker script
x86: don't export inline function
sparc64: don't export static inline pci_ functions
Restructure a bit for multiple version control systems support.
Use a hash for each supported VCS that contains the commands
and patterns used to find commits, logs, and signers.
--git command line options are still used for hg except for
--git-since. Use --hg-since instead.
The number of commits can differ for git and hg, so --rolestats
might be different.
Style changes: Use common push style push(@foo...), simplify a return
Bumped version to 0.23.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix email matching without name --n and --git-blame
Using --non and --git-blame caused maintainer signature
matching to fail. Fixed that by adding 3rd argument to
sub format_email to control show/hide name portion of address
Slurp -f file instead of reading line-by-line for K: pattern matching.
Suggested by Wolfram Sang as more efficient
Refactor git command execution
Break into 2 functions, execute/analyze
Share code between --git and --git-blame
Don't warn multiple times when git isn't installed
Improve stats reporting
--git-min-percent and -- rolestats now count the total number of commits
for either the period of --git-since or if using --git-blame the commits
used by the current file and calculate commit % as
# of commits signed / total commits * 100
Code style cleaning
Use consistent sub foo { my (args...) = @_;
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--roles shows the role of each email address, i.e. why it was selected.
--rolestats selects --roles and adds git log/blame signers #'s and %
Multiple roles are possible (supporter, maintainer, git-signer...)
--roles or --rolestats is meant to help identify appropriate maintainers
to notify and should not be used with "git send-email --cc-cmd"
Example output:
Existing:
$ ./scripts/get_maintainer.pl -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net>
Karol Kozimor <sziwan@users.sourceforge.net>
Len Brown <len.brown@intel.com>
Pavel Machek <pavel@ucw.cz>
Rafael J. Wysocki <rjw@sisk.pl>
Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar <mingo@redhat.com>
H. Peter Anvin <hpa@zytor.com>
x86@kernel.org
Yinghai Lu <yhlu.kernel@gmail.com>
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
acpi4asus-user@lists.sourceforge.netlinux-pm@lists.linux-foundation.orglinux-kernel@vger.kernel.org
With --roles
$ ./scripts/get_maintainer.pl --roles -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)
With --rolestats
$ ./scripts/get_maintainer.pl --rolestats -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)
With --rolestats and --git-blame
$ ./scripts/get_maintainer.pl --rolestats --git-blame -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%,commits:22/154=14%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%,commits:36/154=23%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%,commits:9/154=6%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
Andi Kleen <ak@suse.de> (commits:11/154=7%)
Andrew Morton <akpm@osdl.org> (commits:10/154=6%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)
Other changes:
Format git-signers email addresses a bit to reduce bad signatures
Command line bad arguments emitted a verbose usage(), just show --help
Version number bumped to .22
Ben Hutchings had the idea and created a good deal of this implementation.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
