"perf stat ... perf bench mem mem..." is pretty meaningless when using
small block sizes (as the overhead of the invocation of each test run
basically hides the actual test result in the noise). Repeating the
actually interesting function's invocation a number of times allows the
results to become meaningful.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D767020000780006D738@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intended to be able to support the current selection of the preferred
memcpy() implementation, this patch adds the ability to also measure the
two alternative implementations, again by way of using some
pre-processsor replacement.
While on my Westmere system this proves that the movsb based variant is
worse than the movsq based one (since the ERMS feature isn't there), it
also shows that here for the default as well as small sizes the unrolled
variant outperforms the movsq one.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D728020000780006D732@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since arch/x86/lib/memcpy_64.S implements not only __memcpy, but also
memcpy, without further precautions this function will get chose by the
static linker for resolving all references, and hence the "default"
measurement didn't really measure anything else than the
"x86-64-unrolled" one.
Fix this by renaming (through the pre-processor) the conflicting symbol.
On my Westmere system, the glibc variant turns out to require about 4%
less instructions, but 15% more cycles for the default 1Mb block size
measured.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D6FD020000780006D72F@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new --uid command line option will show only the tasks for a given
user, using the proc interface to figure out the existing tasks.
Kernel work is needed to close races at startup, but this should already
be useful in many use cases.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bdnspm000gw2l984a2t53o8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ctype.h include is not needed here and it breaks build on some systems (at
least 64bit Ubuntu 10.04) like below. Just get rid of it.
CC util/trace-event-info.o
cc1: warnings being treated as errors
util/trace-event-info.c: In function ‘record_file’:
util/trace-event-info.c:192: error: implicit declaration of function ‘pwrite’
util/trace-event-info.c:192: error: nested extern declaration of ‘pwrite’
make: *** [util/trace-event-info.o] Error 1
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326035430-7621-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'field_sep' variable is not set anywhere. Just remove the
conditional.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate command doesn't take non-option arguments.
In fact, it can take last argument as a symbol filter though, but that's
a special case and, IMHO, it should be discouraged in favor of the -s
option.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-6-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'str' should be freed when sort_dimension__add() failed too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a user tries to open so many events, perf_event_open syscall may
fail with EMFILE. Provide advise for that case.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '-v' option is usually defined via OPT_INCR not _INTEGER. Follow
the trend :).
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes:
|make: *** No rule to make target `../../include/linux/const.h', needed by `builtin-annotate.o'. Stop.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324128938-17553-1-git-send-email-sebastian@breakpoint.cc
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To restrict a counter to either host or guest mode this patch introduces
two new event modifiers: G and H.
With G the counter is configured in guest-only mode and with H in
host-only mode.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/n/tip-or5aj3rghy9ngyg882z6kln9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make use of exclude_guest and exlude_host in perf-kvm to do only
guest-only counting by default.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
[ committer note: Moved perf_{guest,host} & event_attr_init to util.c ]
[ so as not to drag more stuff to the python binding]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be recalculated at __hists__output_resort, to take into account
filters possibly applied by the TUI, etc.
Since we do the percent math only for those entries that will appear on
the TUI instead of for _all_ the entries at decay time, updating it for
each sample makes the entries seem to decay faster when using the
navigation keys (since the screen will be refreshed), as we're not
coalescing the entries that are being batched to be merged at next
resort/decay time, but considering their periods.
Bug introduced in 743eb86.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k0d0rq9a8nqtkqohov8cir72@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of /perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-me4dyj6s5snh7jr8wb9gzt82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nowadays we do it per evsel, not per session (that may have multiple
evsels), so rename it to avoid confusion.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-azsgomr5h4dmaudoogw48w49@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As script_spec__delete() frees given struct script_spec it should not be
called if we failed to allocate the struct. Also it's the only caller of
the function, we can get rid of the function itself.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'buf' should be freed when symbol wasn't found too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The get_ratio_color() returns appropriate color string based on @ratio.
It helps reducing code duplication.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'size' cannot be 0 because it was set to 8 on the above line in case
it was 0 and never changed.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current perf scripting facility only supports tracepoints. This
patch implements a generic perl handler to support other events than
tracepoints too.
This patch introduces a function process_event() that is called by perf
for each sample. The function is called with byte streams as arguments
containing information about the event, its attributes, the sample and
raw data. Perl's unpack() function can easily be used for byte decoding.
The following is the default implementation for process_event() that can
also be generated with perf script:
# Packed byte string args of process_event():
#
# $event: union perf_event util/event.h
# $attr: struct perf_event_attr linux/perf_event.h
# $sample: struct perf_sample util/event.h
# $raw_data: perf_sample->raw_data util/event.h
sub process_event
{
my ($event, $attr, $sample, $raw_data) = @_;
my @event = unpack("LSS", $event);
my @attr = unpack("LLQQQQQLLQQ", $attr);
my @sample = unpack("QLLQQQQQLL", $sample);
my @raw_data = unpack("C*", $raw_data);
use Data::Dumper;
print Dumper \@event, \@attr, \@sample, \@raw_data;
}
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323969824-9711-4-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces the for_each_set_bit() macro and modifies feature
implementation to use it.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-8-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The features HEADER_TRACE_INFO and HEADER_BUILD_ID are handled
different when writing the feature section. All other features are
simply disabled on failure and writing the section goes on without
returning an error. There is no reason for these special cases. This
patch unifies handling of the features.
This should be ok since all features can be parsed independently.
Offset and size of a feature's block is stored in struct perf_file_
section right after the data block of perf.data (see perf_session__
write_header()). Thus, if a feature does not exist then other features
can be processed anyway.
Also moving special code for HEADER_BUILD_ID out to write_build_id().
v2:
* perf record throws an error now if buildids may not be generated,
which can be disabled with the --no-buildid option.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-6-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:
# perf record -a -e cpu-cycles sleep 2 | perf report | cat
failed to open perf.data: No such file or directory (try 'perf record' first)
While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.
Applies to the following commands:
perf annotate
perf buildid-list
perf evlist
perf kmem
perf lock
perf report
perf sched
perf script
perf timechart
Also fixes char const* -> const char* type declaration for filename
strings.
v2:
* Prevent potential null pointer access to input_name in
builtin-report.c. Needed due to removal of patch "perf report: Setup
browser if stdout is a pipe"
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If filename is NULL there is an out-of-bound access to struct
perf_session if it would be used with perf_session__open(). Shouldn't
actually happen in current implementation as filename is always !NULL.
Fixing this by always null-terminating filename.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-3-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A feature may be unknown if perf.data is created and parsed on different
perf tool versions. This should not stop the header to be processed,
instead continue processing it.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-2-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing duplication and line size by extending function names for
print and write from a single name.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-7-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we automatically point users at it, let's provide them some
guidance so that they hopefully don't just get mysterious EINVAL's
from the kernel.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-4-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
[ committer note: Made it work after 50a682c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This failure is most likely due to running up against the
kernel.perf_event_mlock_kb sysctl, so we can tell the user what to do to
fix the issue.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-3-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I get such truncated annotation results in 'perf top':
: Disassembly of section .text: ▒
: ▒
: ffffffff810966a8 <nr_iowait_cpu>: ▒
4.94 : ffffffff810966a8: movslq %edi,%rdi ▒
3.70 : ffffffff810966ab: mov $0x13700,%rax ▒
0.00 : ffffffff810966b2: add -0x7e32cb00(,%rdi,8),%rax ▒
8.64 : ffffffff810966ba: mov 0x7e0(%rax),%eax ▒
82.72 : ffffffff810966c0: cltq ▒
Note the missing 'retq' which is there in the original function:
ffffffff810966a8 <nr_iowait_cpu>:
ffffffff810966a8: 48 63 ff movslq %edi,%rdi
ffffffff810966ab: 48 c7 c0 00 37 01 00 mov $0x13700,%rax
ffffffff810966b2: 48 03 04 fd 00 35 cd add -0x7e32cb00(,%rdi,8),%rax
ffffffff810966b9: 81
ffffffff810966ba: 8b 80 e0 07 00 00 mov 0x7e0(%rax),%eax
ffffffff810966c0: 48 98 cltq
ffffffff810966c2: c3 retq
ffffffff810966c3 <this_cpu_load>:
I'm using a fairly recent binutils:
GNU objdump version 2.21.51.0.6-2.fc16 20110118
AFAICS the bug is simply that sym->end points to the last byte
of the symbol in question - while objdump's --stop-address
expects the last byte plus 1 to disassemble the full range.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111223130804.GA24305@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This handles multithreaded processes with named threads when doing
system wide profiling: the comm for each thread is looked up allowing
them to be different from the thread group leader.
v2:
- fixed sizeof arg to perf_event__get_comm_tgid
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324578603-12762-3-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf does not properly handle monitoring of processes with named threads.
For example:
$ ps -C myapp -L
PID LWP TTY TIME CMD
25118 25118 ? 00:00:00 myapp
25118 25119 ? 00:00:00 myapp:worker
perf record -e cs -c 1 -fo /tmp/perf.data -p 25118 -- sleep 10
perf report --stdio -i /tmp/perf.data
100.00% myapp:worker [kernel.kallsyms] [k] perf_event_task_sched_out
The process name is set to the name of the last thread it finds for the
process.
The Problem:
perf-top and perf-record both create a thread_map of threads to be
monitored. That map is used in perf_event__synthesize_thread_map which
loops over the entries in thread_map and calls __event__synthesize_thread
to generate COMM and MMAP events.
__event__synthesize_thread calls perf_event__synthesize_comm which opens
/proc/pid/status, reads the name of the task and its thread group id.
That's all fine. The problem is that it then reads /proc/pid/task and
generates COMM events for each task it finds - but using the name found
in /proc/pid/status where pid is the thread of interest.
The end result (looping over thread_map + synthesizing comm events for
each thread each time) means the name of the last thread processed sets
the name for all threads in the process - which is not good for
multithreaded processes with named threads.
The Fix:
perf_event__synthesize_comm has an input argument (full) that decides
whether to process task entries for each pid it is passed. It currently
never set to 0 (perf_event__synthesize_comm has a single caller and it
always passes the value 1). Let's fix that.
Add the full input argument to __event__synthesize_thread which passes
it to perf_event__synthesize_comm. For thread/process monitoring set full
to 0 which means COMM and MMAP events are only generated for the pid
passed to it. For system wide monitoring set full to 1 so that COMM events
are generated for all threads in a process.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324578603-12762-2-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report does not take a command from command line.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-8-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new generic hw event: ref-cycles, which maps to
PERF_HW_COUNT_REF_CPUCYCLES:
$ perf stat -e ref-cycles ls
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323559734-3488-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adding automated tests for event parsing to include testing for modifier
and ',' operator.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: cjashfor@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1323963039-7602-4-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Remove some tests that need group_leader & bison patchkits ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use local variable 'dso' to reduce typing a bit and rearrange the if
condition. Also NULL check of al->map in the condition is not necessary.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These files are part of PERF not GIT although they're come from there :)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323784323-2150-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After freeing each elements of the @values->value, we should free itself
too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The order of freeing comm_list and dso_list should be reversed.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
