Commit graph

728 commits

Author SHA1 Message Date
Kumar Gala
e1a2289736 powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systems
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:19 -05:00
Becky Bruce
abd7d4837f powerpc/86xx: Add 36-bit device tree for mpc8641hpcn
The new dts places most of the devices in physical address space
above 32-bits, which allows us to have more than 4GB of RAM present.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:17 -05:00
Kumar Gala
28eac2b74c powerpc/fsl: Remove cell-index from PCI nodes
The cell-index property isn't used on PCI nodes and is ill defined.
Remove it for now and if someone comes up with a good reason and
consistent definition for it we can add it back

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:14 -05:00
Linus Torvalds
662f11cf2a Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix PCI ROM access
  powerpc/pseries: Really fix the oprofile CPU type on pseries
  serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
  powerpc/cell: Make ptcal more reliable
  powerpc: Allow mem=x cmdline to work with 4G+
  powerpc/mpic: Fix incorrect allocation of interrupt rev-map
  powerpc: Fix oprofile sampling of marked events on POWER7
  powerpc/iseries: Fix pci breakage due to bad dma_data initialization
  powerpc: Fix mktree build error on Mac OS X host
  powerpc/virtex: Fix duplicate level irq events.
  powerpc/virtex: Add uImage to the default images list
  powerpc/boot: add simpleImage.* to clean-files list
  powerpc/8xx: Update defconfigs
  powerpc/embedded6xx: Update defconfigs
  powerpc/86xx: Update defconfigs
  powerpc/85xx: Update defconfigs
  powerpc/83xx: Update defconfigs
  powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
2009-05-15 08:05:02 -07:00
Timur Tabi
93f1cc609c powerpc: Fix mktree build error on Mac OS X host
The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails.  Change this to
"unsigned int".

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Grant Likely
be68751878 powerpc/boot: add simpleImage.* to clean-files list
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-14 10:23:09 -06:00
David Gibson
9fffb55f66 Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc
The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 16:52:26 -07:00
Paul Mackerras
de60fba2bb Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2009-04-28 10:47:16 +10:00
Martyn Welch
28853da20c powerpc/86xx: Add device_type entry to soc for ppc9a
The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-27 13:01:47 -05:00
Valentine Barshak
644e28f342 powerpc/44x: Correct memory size calculation for denali-based boards
Some U-Boot versions incorrectly set the number of chipselects to two
for Sequoia/Rainier boards while they only have one chipselect hardwired.
This patch adds a workaround for this, hardcoding the number of chipselects
to one for sequioa/rainer board models and reading the actual value from
the memory controller register DDR0_10 otherwise.

It also fixes another error in the way ibm4xx_denali_fixup_memsize
calculates memory size. When testing the DDR_REDUC bit, the polarity is
backwards.  A "1" implies 32-bit wide memory while a "0" implies 64-bit
wide memory.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-04-24 09:02:37 -04:00
Paul Mackerras
5bd3ef84d7 Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge 2009-04-22 13:02:09 +10:00
Grant Likely
bda9de2c4f powerpc/5200: Add FLASH nodes to lite5200 device tree
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-16 15:11:54 -06:00
Linus Torvalds
0e26da0f22 Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: imx: Make disable_delay a per-device variable
  i2c: xtensa s6000 i2c driver
  powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board
  i2c: i2c-mpc: make I2C bus speed configurable
  i2c: i2c-mpc: use dev based printout function
  i2c: i2c-mpc: various coding style fixes
  i2c: imx: Add missing request_mem_region in probe()
  i2c: i2c-s3c2410: Initialise Samsung I2C controller early
  i2c-s3c2410: Simplify bus frequency calculation
  i2c-s3c2410: sda_delay should be in ns, not clock ticks
  i2c: iMX/MXC support
2009-04-07 08:45:12 -07:00
Linus Torvalds
44d84afa83 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits)
  powerpc: Fix oops when loading modules
  powerpc: Wire up preadv and pwritev
  powerpc/ftrace: Fix printf format warning
  powerpc/ftrace: Fix #if that should be #ifdef
  powerpc: Fix ptrace compat wrapper for FPU register access
  powerpc: Print information about mapping hw irqs to virtual irqs
  powerpc: Correct dependency of KEXEC
  powerpc: Disable VSX or current process in giveup_fpu/altivec
  powerpc/pseries: Enable relay in pseries_defconfig
  powerpc/pseries: Fix ibm,client-architecture comment
  powerpc/pseries: Scan for all events in rtasd
  powerpc/pseries: Add dispatch dispersion statistics
  powerpc: Clean up some prom printouts
  powerpc: Print progress of ibm,client-architecture method
  powerpc: Remove duplicated #include's
  powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
  powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
  fsl-diu-fb: Pass the proper device for dma mapping routines
  powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
  cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.
  ...
2009-04-07 07:40:55 -07:00
Wolfgang Grandegger
c724d67dff powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board
Preserve I2C clock settings for the Socrates MPC8544 board.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:23:33 +01:00
Wolfgang Grandegger
655544c69c powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3
For enet2 and enet3 the wrong phy-handles have been used in DTS files
of the TQM8548 modules.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07 01:36:35 -05:00
Wolfgang Grandegger
6467cae318 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes
Commit 0f73a449a6 added I2C device nodes
for the LM75 thermal sensor on the TQM85xx modules, unfortunately with
the wrong I2C address. The LM75s are located at address 0x48.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07 01:36:32 -05:00
Paul Mackerras
ae6e59caef Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2009-04-07 12:54:08 +10:00
Linus Torvalds
22ae77bc7a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (53 commits)
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] [NOR] Fixup for Numonyx M29W128 chips
  [MTD] mtdpart: Make ecc_stats more realistic.
  powerpc/85xx: TQM8548: Update DTS file for multi-chip support
  powerpc: NAND: FSL UPM: document new bindings
  [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
  [MTD] [NAND] FSL-UPM: add multi chip support
  [MTD] [NOR] Add device parent info to physmap_of
  [MTD] [NAND] Add support for NAND on the Socrates board
  [MTD] [NAND] Add support for 4KiB pages.
  [MTD] sysfs support should not depend on CONFIG_PROC_FS
  [MTD] [NAND] Add parent info for CAFÉ controller
  [MTD] support driver model updates
  [MTD] driver model updates (part 2)
  [MTD] driver model updates
  [MTD] [NAND] move gen_nand's probe function to .devinit.text
  [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text
  [MTD] fix use after free in register_mtd_blktrans
  [MTD] [MAPS] Drop now unused sharpsl-flash map
  [MTD] ofpart: Check name property to determine partition nodes.
  ...

Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06 14:56:26 -07:00
Wolfgang Grandegger
7995c7e94f powerpc/85xx: TQM8548: Update DTS file for multi-chip support
This patch adds multi-chip support for the Micron MT29F8G08FAB NAND
flash memory on the TQM8548 modules.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 07:19:18 -07:00
Scott Wood
65cc0fa3bd powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
Add aliases, and correct CS0 offset to match how u-boot
programs it (this was not a problem with cuImage because
the wrapper would reprogram the localbus to match the device
tree).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-06 09:09:46 -05:00
Wolfgang Grandegger
212f8c6d67 powerpc/85xx: Re-add the device_type soc to socrates.dts
The device_type "soc" is still required for MPC85xx boards.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-02 14:52:26 -05:00
Anton Vorontsov
7545828531 powerpc/83xx: add mmc-spi support via the device tree for MPC8323E-RDB
- Add gpio-controller node to manage QE GPIO Bank D;
- Add mmc-spi node;
- Modify board file so that it won't use legacy SPI support with the new
  device trees.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:23 -07:00
Kumar Gala
fe671772ab powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodes
Older devices tree's used "fsl,85.." instead of the preferred
"fsl,mpc85.." for the memory controller & l2 cache controller nodes.
The EDAC code is the only use of these and has been updated for some
time to support both "fsl,85.." and "fsl,mpc85.."

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-31 08:46:25 -05:00
Benjamin Herrenschmidt
9ff9a26b78 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/elf.h
	drivers/i2c/busses/i2c-mpc.c
2009-03-30 14:04:53 +11:00
Wolfgang Grandegger
393adcacad powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.

The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.

For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:

    can@3,100 {
            compatible = "philips,sja1000";
            reg = <3 0x100 0x80>;
            interrupts = <2 2>;
            interrupts = <2 8 1>;   // number, type, routing
            interrupt-parent = <&fpga_pic>;
    };

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-27 06:42:08 -05:00
Kumar Gala
a6ecb7e96c powerpc/83xx: Update ranges in gianfar node to match other dts
The gianfar@25000 node was missing its ranges prop for the mdio bus
and provided an explicit ranges property on gianfar@24000 to match
change from commit:

commit 70b3adbba0
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Mar 19 21:01:45 2009 +0300

    powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 09:23:17 -05:00
Anton Vorontsov
d8bc55fb33 powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:18 -05:00
Anton Vorontsov
84ba4a5899 powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:13 -05:00
Anton Vorontsov
70b3adbba0 powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:04 -05:00
Anton Vorontsov
125a00d74e powerpc/83xx: Add power management support for MPC837x boards
This patch adds pmc nodes to the device tree files so that the boards
will able to use standby capability of MPC837x processors. The MPC837x
PMC controllers are compatible with MPC8349 ones (i.e. no deep sleep).

sleep = <> properties are used to specify SCCR masks as described
in "Specifying Device Power Management Information (sleep property)"
chapter in Documentation/powerpc/booting-without-of.txt.

Since I2C1 and eSDHC controllers share the same clock source, they
are now placed under sleep-nexus nodes.

A processor is able to wakeup the boards on LAN events (Wake-On-Lan),
console events (with no_console_suspend kernel command line), GPIO
events and external IRQs (IRQ1 and IRQ2).

The processor can also wakeup the boards by the fourth general purpose
timer in GTM1 block, but the GTM wakeup support isn't yet implemented
(it's tested to work, but it's unclear how can we use the quite short
GTM timers, and how do we want to expose the GTM to userspace).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:34:19 -05:00
Benjamin Herrenschmidt
77ecfe8d42 Merge commit 'gcl/next' into next 2009-03-20 16:27:57 +11:00
Martyn Welch
740d36ae63 powerpc/86xx: Board support for GE Fanuc's PPC9A
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:01:00 -05:00
Grant Likely
a7e1cf0c51 powerpc/bootwrapper: add fixed-head.o to simpleimage wrappers
fixed-head.o must be linked into the bootwrapper for raw-binary images to
work.  This patch adds it into the bootwrapper.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reported-by: Eddie Dawydiuk <eddie@embeddedarm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 09:36:26 -06:00
Wolfram Sang
10b9dc6f6b powerpc/5200: add Phytec phyCORE-MPC5200B-IO board (pcm032)
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-11 09:36:26 -06:00
Ted Peters
f084e8db18 powerpc/85xx: Fix MPC8572DS PCI protected interrupt sources
The PCI irqs for the protected sources where not correct for PCI PHBs

Signed-off-by: Ted Peters <ted.peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11 06:00:04 -05:00
Benjamin Herrenschmidt
d6ee6f7e4c Merge commit 'gcl/next' into next 2009-03-11 17:10:00 +11:00
Martyn Welch
ac4dff224d powerpc/86xx: Correct local bus registers in GE Fanuc SBC610 dts file
The registers for the local bus are incorrectly set to 0xf8005000 rather
than there actual location of 0xfef05000.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 11:48:14 -05:00
Timur Tabi
0bcd783c1f powerpc: add fsl,fifo-depth property to Freescale SSI device nodes
The Freescale Serial Synchronous Interface (SSI) is an audio device present on
some Freescale SOCs.  Various implementations of the SSI have a different
transmit and receive FIFO depth, but are otherwise identical.  To support
these variations, add a new property fsl,fifo-depth to the SSI node that
specifies the depth of the FIFOs.

Also update the MPC8610 HPCD device tree with this property.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 10:52:03 -05:00
Grant Likely
48b3fd14bd powerpc/4xx: update ml507 .dts file to release reference design
This patch updates the Xilinx ML507 device tree to match the released
ML507 powerpc reference design (ml507_ppc440_emb_ref).  This patch is
needed to boot Linux on the ML507 powerpc reference design without
manually generating and tweaking a device tree from the project directory.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-06 08:50:24 -07:00
Benjamin Herrenschmidt
652e8f8d57 Merge commit 'jwb/next' into next 2009-03-03 13:30:03 +11:00
Grzegorz Bernacki
86f5a4a7d7 powerpc/5200: On the digsy-mtc, configure PSC4 and PSC5 as UARTs
On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26 22:55:29 -07:00
James Hsiao
049359d655 crypto: amcc - Add crypt4xx driver
This patch adds support for AMCC ppc4xx security device driver. This is the
initial release that includes the driver framework with AES and SHA1 algorithms
support.

The remaining algorithms will be released in the near future.

Signed-off-by: James Hsiao <jhsiao@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:49:43 +08:00
Benjamin Herrenschmidt
3b7faeb49e Merge commit 'kumar/next' into next 2009-02-18 13:23:30 +11:00
Madhulika Madishetty
6c71209023 AMCC PPC 460SX redwood SoC platform initial framework
This patch contains initial framework for the AMCC Redwood board.

Signed-off-by: Madhulika Madishetty <mmadishetty@amcc.com>
Signed-off-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Vidhyananth Venkatasamy <vvenkatasamy@amcc.com>
Signed-off-by: Preetesh Parekh <pparekh@amcc.com>
Acked-by: Loc Ho <lho@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:41:29 -05:00
Benjamin Herrenschmidt
018f76ec51 powerpc/4xx: Add missing USB and i2c devices to Canyonlands
This adds the device-tree entries for a handful of devices on the
Canyonlands board, such as the EHCI and OHCI controllers, the real
time clock and the AD7414 thermal monitor.

I also updated the defconfig to enable various options related to
these devices.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:40:08 -05:00
Kumar Gala
a2404746f1 powerpc/85xx: Added 36-bit physical device tree for mpc8572ds board
Added a device tree that should be identical to mpc8572ds.dtb except
the physical addresses for all IO are above the 4G boundary.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-11 00:18:26 -06:00
Kumar Gala
ca34040c40 powerpc/85xx: Fixed PCI IO region sizes in mpc8572ds*.dts
The PCI IO region sizes where incorrectly set to 1M instead of 64k.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-11 00:18:24 -06:00
Gerhard Pircher
8f23735d8f powerpc/amigaone: Bootwrapper and serial console support for AmigaOne
This adds the bootwrapper for the cuImage target and a compatible property
check for "pnpPNP,501" to the generic serial console support code.
The default link address for the cuImage target is set to 0x800000. This
allows to boot the kernel with AmigaOS4's second level bootloader, which
always loads a uImage at 0x500000.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:09 +11:00
Gerhard Pircher
50408b7def powerpc/amigaone: Generic device tree for all AmigaOne boards
This device tree does not provide the correct CPU name, as various CPU
models and revisions are used in AmigaOnes. Also the PCI root node does
not contain a interrupt mapping property, as all boards have different
interrupt routing. However the kernel can do a 1:1 mapping of all PCI
interrupts, as only i8259 legacy interrupts are used.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:09 +11:00