When running a scp transfer using a USB/Ethernet adapter the following crash
happens:
$ scp test.tar.gz fabio@192.168.1.100:/home/fabio
fabio@192.168.1.100's password:
test.tar.gz 0% 0 0.0KB/s --:-- ETA
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0()
NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out
Modules linked in:
Backtrace:
[<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c)
r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0
[<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>]
(warn_slowpath_common+0x54/0x6c)
[<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>]
(warn_slowpath_fmt+0x38/0x40)
...
Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem.
However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode,
so allow disabling streaming also in host mode.
Tested on a mx6qsabrelite board.
Suggested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl-ehci probing fails on mpc5121e:
...
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: Could not get controller version
fsl-ehci fsl-ehci.0: can't setup
fsl-ehci fsl-ehci.0: USB bus 1 deregistered
fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22
fsl-ehci: probe of fsl-ehci.0 failed with error -22
Fix it by returning appropriate version info for mpc5121, too.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a
normal EHCI driver) introduced a dependency on USB_EHCI_HCD for the
chipidea USB host driver, that in turns depends on USB_ARCH_HAS_EHCI.
If this symbol is not set for MXS, the MXS boards are not able to use
the chipidea driver anymore.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add default pinctrl selection to atmel-ssc driver. The pinctrl
is mandatory.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
[nicolas.ferre@atmel.com: split dtsi and driver changes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add pinctrl support for SSC on AT91 dtsi files.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
[nicolas.ferre@atmel.com: split dtsi and driver changes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reluctantly-acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Since:
commit 2c60db0370
Author: Eric Dumazet <edumazet@google.com>
Date: Sun Sep 16 09:17:26 2012 +0000
net: provide a default dev->ethtool_ops
wireless core does not correctly assign ethtool_ops.
After alloc_netdev*() call, some cfg80211 drivers provide they own
ethtool_ops, but some do not. For them, wireless core provide generic
cfg80211_ethtool_ops, which is assigned in NETDEV_REGISTER notify call:
if (!dev->ethtool_ops)
dev->ethtool_ops = &cfg80211_ethtool_ops;
But after Eric's commit, dev->ethtool_ops is no longer NULL (on cfg80211
drivers without custom ethtool_ops), but points to &default_ethtool_ops.
In order to fix the problem, provide function which will overwrite
default_ethtool_ops and use it by wireless core.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is werid that qlge driver supports NETIF_F_TSO6 but
not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1]
when VLAN device setups on a qlge interface.
I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM,
so we have to just remove the NETIF_F_TSO6 flag.
After this patch, the TCP/IPv6 traffic becomes normal again,
no kernel warnings any more.
NOTE: I only tested it on 2.6.32 kernel, even if the upstream
kernel could fix this automatically (it is hard to track NETIF*
flags), removing it is also safe.
1. https://bugzilla.redhat.com/show_bug.cgi?id=891839
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Vp0h
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull a hwmon patch from Guenter Roeck:
"Fix build error in vexpress driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set
Merge misc fixes from Andrew Morton:
"The audit fixes have been floating around for a while - Al and Eric
aren't responding to either myself or Kees so I asked Kees to
re-review them and here they are."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
lib/rbtree.c: avoid the use of non-static __always_inline
MAINTAINERS: Omar had moved
mm: compaction: partially revert capture of suitable high-order page
linux/audit.h: move ptrace.h include to kernel header
kernel/audit.c: avoid negative sleep durations
audit: catch possible NULL audit buffers
audit: create explicit AUDIT_SECCOMP event type
MAINTAINERS: fix a status pattern
MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h
mm: thp: acquire the anon_vma rwsem for write during split
mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep
lockdep, rwsem: provide down_write_nest_lock()
arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64
mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment
mm: use aligned zone start for pfn_to_bitidx calculation
fs/exec.c: work around icc miscompilation
mm: compaction: fix echo 1 > compact_memory return error issue
mm: memblock: fix wrong memmove size in memblock_merge_regions()
drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function
mm: migrate: check page_count of THP before migrating
...
lib/rbtree.c declared __rb_erase_color() as __always_inline void, and
then exported it with EXPORT_SYMBOL.
This was because __rb_erase_color() must be exported for augmented
rbtree users, but it must also be inlined into rb_erase() so that the
dummy callback can get optimized out of that call site.
(Actually with a modern compiler, none of the dummy callback functions
should even be generated as separate text functions).
The above usage is legal C, but it was unusual enough for some compilers
to warn about it. This change makes things more explicit, with a static
__always_inline ____rb_erase_color function for use in rb_erase(), and a
separate non-inline __rb_erase_color function for use in
rb_erase_augmented call sites.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Cc: David Miller <davem@davemloft.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when
waiting for POLLIN on a local TCP socket. It was easier to trigger if
there was disk IO and dirty pages at the same time and he bisected it to
commit 1fb3f8ca0e ("mm: compaction: capture a suitable high-order page
immediately when it is made available").
The intention of that patch was to improve high-order allocations under
memory pressure after changes made to reclaim in 3.6 drastically hurt
THP allocations but the approach was flawed. For Eric, the problem was
that page->pfmemalloc was not being cleared for captured pages leading
to a poor interaction with swap-over-NFS support causing the packets to
be dropped. However, I identified a few more problems with the patch
including the fact that it can increase contention on zone->lock in some
cases which could result in async direct compaction being aborted early.
In retrospect the capture patch took the wrong approach. What it should
have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it
was allocating for THP and avoided races that way. While the patch was
showing to improve allocation success rates at the time, the benefit is
marginal given the relative complexity and it should be revisited from
scratch in the context of the other reclaim-related changes that have
taken place since the patch was first written and tested. This patch
partially reverts commit 1fb3f8ca0e ("mm: compaction: capture a
suitable high-order page immediately when it is made available").
Reported-and-tested-by: Eric Wong <normalperson@yhbt.net>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the kernel internals want pt_regs (and so it includes
linux/ptrace.h), the user version of audit.h does not need it. So move
the include out of the uapi version.
This avoids issues where people want the audit defines and userland
ptrace api. Including both the kernel ptrace and the userland ptrace
headers can easily lead to failure.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
audit_log_start() performs the same jiffies comparison in two places.
If sufficient time has elapsed between the two comparisons, the second
one produces a negative sleep duration:
schedule_timeout: wrong timeout value fffffffffffffff0
Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43
Call Trace:
schedule_timeout+0x305/0x340
audit_log_start+0x311/0x470
audit_log_exit+0x4b/0xfb0
__audit_syscall_exit+0x25f/0x2c0
sysret_audit+0x17/0x21
Fix it by performing the comparison a single time.
Reported-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's possible for audit_log_start() to return NULL. Handle it in the
various callers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Cc: Will Drewry <wad@google.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1
could only kill a process. While we still want to make sure an audit
record is forced on a kill, this should use a separate record type since
seccomp mode 2 introduces other behaviors.
In the case of "handled" behaviors (process wasn't killed), only emit a
record if the process is under inspection. This change also fixes
userspace examination of seccomp audit events, since it was considered
malformed due to missing fields of the AUDIT_ANOM_ABEND event type.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Acked-by: Will Drewry <wad@chromium.org>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This file was moved to arch/arm/mach-omap2/omap=5Fhwmod.h by commit
2a296c8f89 ("ARM: OMAP: Make plat/omap=5Fhwmod.h local to
mach-omap2").
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhouping Liu reported the following against 3.8-rc1 when running a mmap
testcase from LTP.
mapcount 0 page_mapcount 3
------------[ cut here ]------------
kernel BUG at mm/huge_memory.c:1798!
invalid opcode: 0000 [#1] SMP
Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas
CPU 1
Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356
RIP: __split_huge_page+0x677/0x6d0
RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293
RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2
RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246
RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a
R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000
R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000
FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0)
Stack:
ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88
ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c
00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8
Call Trace:
split_huge_page+0x68/0xb0
__split_huge_page_pmd+0x134/0x330
split_huge_page_pmd_mm+0x51/0x60
split_huge_page_address+0x3b/0x50
__vma_adjust_trans_huge+0x9c/0xf0
vma_adjust+0x684/0x750
__split_vma.isra.28+0x1fa/0x220
do_munmap+0xf9/0x420
vm_munmap+0x4e/0x70
sys_munmap+0x2b/0x40
system_call_fastpath+0x16/0x1b
Alexander Beregalov and Alex Xu reported similar bugs and Hillf Danton
identified that commit 5a505085f0 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem") and commit 4fc3f1d66b ("mm/rmap,
migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable")
were likely the problem. Reverting these commits was reported to solve
the problem for Alexander.
Despite the reason for these commits, NUMA balancing is not the direct
source of the problem. split_huge_page() expects the anon_vma lock to
be exclusive to serialise the whole split operation. Ordinarily it is
expected that the anon_vma lock would only be required when updating the
avcs but THP also uses the anon_vma rwsem for collapse and split
operations where the page lock or compound lock cannot be used (as the
page is changing from base to THP or vice versa) and the page table
locks are insufficient.
This patch takes the anon_vma lock for write to serialise against parallel
split_huge_page as THP expected before the conversion to rwsem.
Reported-and-tested-by: Zhouping Liu <zliu@redhat.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5a505085f0 ("mm/rmap: Convert the struct anon_vma::mutex to an
rwsem") turned anon_vma mutex to rwsem.
However, the properly annotated nested locking in mm_take_all_locks()
has been converted from
mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem);
to
down_write(&anon_vma->root->rwsem);
which is incomplete, and causes the false positive report from lockdep
below.
Annotate the fact that mmap_sem is used as an outter lock to serialize
taking of all the anon_vma rwsems at once no matter the order, using the
down_write_nest_lock() primitive.
This patch fixes this lockdep report:
=============================================
[ INFO: possible recursive locking detected ]
3.8.0-rc2-00036-g5f73896 #171 Not tainted
---------------------------------------------
qemu-kvm/2315 is trying to acquire lock:
(&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
but task is already holding lock:
(&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&anon_vma->rwsem);
lock(&anon_vma->rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by qemu-kvm/2315:
#0: (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170
#1: (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0
#2: (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0
#3: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
stack backtrace:
Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f73896 #171
Call Trace:
print_deadlock_bug+0xf2/0x100
validate_chain+0x4f6/0x720
__lock_acquire+0x359/0x580
lock_acquire+0x121/0x190
down_write+0x3f/0x70
mm_take_all_locks+0x149/0x1b0
do_mmu_notifier_register+0x68/0x170
mmu_notifier_register+0xe/0x10
kvm_create_vm+0x22b/0x330 [kvm]
kvm_dev_ioctl+0xf8/0x1a0 [kvm]
do_vfs_ioctl+0x9d/0x350
sys_ioctl+0x91/0xb0
system_call_fastpath+0x16/0x1b
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
down_write_nest_lock() provides a means to annotate locking scenario
where an outer lock is guaranteed to serialize the order nested locks
are being acquired.
This is analogoue to already existing mutex_lock_nest_lock() and
spin_lock_nest_lock().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mn10300 doesn't provide its own atomic64 implementation, so it should pull
in the generic one.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently free_all_bootmem_core ignores that node_min_pfn may be not
multiple of BITS_PER_LONG. Eg commit 6dccdcbe2c ("mm: bootmem: fix
checking the bitmap when finally freeing bootmem") shifts vec by lower
bits of start instead of lower bits of idx. Also
if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL)
assumes that vec bit 0 corresponds to start pfn, which is only true when
node_min_pfn is a multiple of BITS_PER_LONG. Also loop in the else
clause can double-free pages (e.g. with node_min_pfn == start == 1,
map[0] == ~0 on 32-bit machine page 32 will be double-freed).
This bug causes the following message during xtensa kernel boot:
bootmem::free_all_bootmem_core nid=0 start=1 end=8000
BUG: Bad page state in process swapper pfn:00001
page:d04bd020 count:0 mapcount:-127 mapping: (null) index:0x2
page flags: 0x0()
Call Trace:
bad_page+0x8c/0x9c
free_pages_prepare+0x5e/0x88
free_hot_cold_page+0xc/0xa0
__free_pages+0x24/0x38
__free_pages_bootmem+0x54/0x56
free_all_bootmem_core$part$11+0xeb/0x138
free_all_bootmem+0x46/0x58
mem_init+0x25/0xa4
start_kernel+0x11e/0x25c
should_never_return+0x0/0x3be7
The fix is the following:
- always align vec so that its bit 0 corresponds to start
- provide BITS_PER_LONG bits in vec, if those bits are available in the
map
- don't free pages past next start position in the else clause.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Prasad Koya <prasad.koya@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current calculation in pfn_to_bitidx assumes that (pfn -
zone->zone_start_pfn) >> pageblock_order will return the same bit for
all pfn in a pageblock. If zone_start_pfn is not aligned to
pageblock_nr_pages, this may not always be correct.
Consider the following with pageblock order = 10, zone start 2MB:
pfn | pfn - zone start | (pfn - zone start) >> page block order
----------------------------------------------------------------
0x26000 | 0x25e00 | 0x97
0x26100 | 0x25f00 | 0x97
0x26200 | 0x26000 | 0x98
0x26300 | 0x26100 | 0x98
This means that calling {get,set}_pageblock_migratetype on a single page
will not set the migratetype for the full block. Fix this by rounding
down zone_start_pfn when doing the bitidx calculation.
For our use case, the effects of this bug were mostly tied to the fact
that CMA allocations would either take a long time or fail to happen.
Depending on the driver using CMA, this could result in anything from
visual glitches to application failures.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tricky problem is this check:
if (i++ >= max)
icc (mis)optimizes this check as:
if (++i > max)
The check now becomes a no-op since max is MAX_ARG_STRINGS (0x7FFFFFFF).
This is "allowed" by the C standard, assuming i++ never overflows,
because signed integer overflow is undefined behavior. This
optimization effectively reverts the previous commit 362e6663ef
("exec.c, compat.c: fix count(), compat_count() bounds checking") that
tries to fix the check.
This patch simply moves ++ after the check.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
when run the folloing command under shell, it will return error
sh/$ echo 1 > /proc/sys/vm/compact_memory
sh/$ sh: write error: Bad address
After strace, I found the following log:
...
write(1, "1\n", 2) = 3
write(1, "", 4294967295) = -1 EFAULT (Bad address)
write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address
) = 31
This tells system return 3(COMPACT_COMPLETE) after write data to
compact_memory.
The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE)
from sysctl_compaction_handler after compaction_nodes finished.
Signed-off-by: Jason Liu <r64343@freescale.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memmove span covers from (next+1) to the end of the array, and the
index of next is (i+1), so the index of (next+1) is (i+2). So the size
of remaining array elements is (type->cnt - (i + 2)).
Since the remaining elements of the memblock array are move forward by
one element and there is only one additional element caused by this bug.
So there won't be any write overflow here but read overflow. It may
read one more element out of the array address if the array happens to
be full. Commonly it doesn't matter at all but if the array happens to
be located at the end a memblock, it may cause a invalid read operation
for the physical address doesn't exist.
There are 2 *happens to be* here, so I think the probability is quite
low, I don't know if any guy is haunted by this bug before.
Mostly I think it's user-invisible.
Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was leading to a strange behaviour when using the fbcon driver on
top of this one: the letters were in the right order, but each letter
had a vertical symmetry.
This was because the addressing was right for the byte, but the
addressing of each individual bit was inverted.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Thomas Petazzoni <thomas@free-electrons.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins pointed out that migrate_misplaced_transhuge_page() does
not check page_count before migrating like base page migration and
khugepage. He could not see why this was safe and he is right.
The potential impact of the bug is avoided due to the limitations of
NUMA balancing. The page_mapcount() check ensures that only a single
address space is using this page and as THPs are typically private it
should not be possible for another address space to fault it in
parallel. If the address space has one associated task then it's
difficult to have both a GUP pin and be referencing the page at the same
time. If there are multiple tasks then a buggy scenario requires that
another thread be accessing the page while the direct IO is in flight.
This is dodgy behaviour as there is a possibility of corruption with or
without THP migration. It would be
While we happen to be safe for the most part it is shoddy to depend on
such "safety" so this patch checks the page count similar to anonymous
pages. Note that this does not mean that the page_mapcount() check can
go away. If we were to remove the page_mapcount() check the the THP
would have to be unmapped from all referencing PTEs, replaced with
migration PTEs and restored properly afterwards.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the warning
WARNING: drivers/rtc/rtc-da9055.o(.text+0xa71): Section mismatch in reference from the function da9055_rtc_probe() to the function .init.text:da9055_rtc_device_init()
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases, free_irq_cpu_rmap() is called while holding a lock (eg
rtnl). This can lead to deadlocks, because it invokes
flush_scheduled_work() which ends up waiting for whole system workqueue
to flush, but some pending works might try to acquire the lock we are
already holding.
This commit uses reference-counting to replace
irq_run_affinity_notifiers(). It also removes
irq_run_affinity_notifiers() altogether.
[akpm@linux-foundation.org: eliminate free_cpu_rmap, rename cpu_rmap_reclaim() to cpu_rmap_release(), propagate kref_put() retval from cpu_rmap_put()]
Signed-off-by: David Decotigny <decot@googlers.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SNB graphics devices have a bug that prevent them from accessing certain
memory ranges, namely anything below 1M and in the pages listed in the
table. So reserve those at boot if set detect a SNB gfx device on the
CPU to avoid GPU hangs.
Stephane Marchesin had a similar patch to the page allocator awhile
back, but rather than reserving pages up front, it leaked them at
allocation time.
[ hpa: made a number of stylistic changes, marked arrays as static
const, and made less verbose; use "memblock=debug" for full
verbosity. ]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Commit bf4d1b5ddb (cpuidle: support
multiple drivers) changed the number of initialized state kobjects
in cpuidle_add_state_sysfs() from device->state_count to
drv->state_count, but left device->state_count in
cpuidle_remove_state_sysfs(). The values of these two fields may be
different, in which case a NULL pointer dereference may happen in
cpuidle_remove_state_sysfs(), for example. Fix this problem by making
cpuidle_add_state_sysfs() use device->state_count too (which restores
the original behavior of it).
[rjw: Changelog]
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 02404baf1b "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.
If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.
The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.
Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some touchscreens have buggy firmware which claims
remote wakeup to be enabled after a reset. They nevertheless
crash if the feature is cleared by the host.
Add a check for reset resume before checking for
an enabled remote wakeup feature. On compliant
devices the feature must be cleared after a reset anyway.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a socket lock leak in net/sunrpc/xprt.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJQ8FNyAAoJEGcL54qWCgDy1EAP/jetZgUmOLCV37TVAFDPkaDy
ADjeIshsJt7T2/2zKWBoDQ4sKSNO3wRbuSQ9gaMPglfdf8j3PV38+2MOyL3L4yTp
2L5RqVrbzs+xgIRN7uu6pajVNeZpZb4PqphO+2SnM8uSz6XMVpYRoDtVBiEhgF16
F9csoBEX5HMC4AFhbkDoKOUoIb13cutYdd+0ijKnAwBrc31YUrcQDwUtZfcp8h2P
xk4q/k5uj0ilHGafu0BkkMqyQLVocvp/FJXDQ5CjCI73J55hE7lcfM2LMavrJ0gA
ACxE5+kr0vVOaasvpyu3nkntQ4Td6Z2PYbXCyIIlGvsyqCM8QgqUrfTU9zZauxRa
mrRWgw0c/mqJ2o41Jl2GxWXCPIoDMX9izdZad3wZ9ct0OTTk6RumHTvnGo1XoZBI
i5UTVgmnZoOFBQ+gWsxBay9rBjEoG2IBxsew7eEDPCXM0nIG0NztvGK7psFbjR1y
+wPAgB9+NghOzTwH3GrC1zEK5tpGq1DAbyciT5HC7gk/1ZmfVcvT0iAqO6nkyeyX
MArMSS6TAgR4IH+gr/qdybnwI6AezGVLiRwCScNPWyHq/gJ9tMCpZ+iodQKxMkoW
PGHaldLdMWtL+PEEYAmqWclMTaEnnsgMbbqmU1PucWYZ9Ovq2Kktzucczd/2GwdO
Gh2Utpg0vfAJSZkxy1yK
=ukG7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.8-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix from Trond Myklebust:
- Fix a socket lock leak in net/sunrpc/xprt.c
* tag 'nfs-for-3.8-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Ensure we release the socket write lock if the rpc_task exits early
Adding support "PSC Scanning, Magellan 800i" in cdc-acm
Very simple, but very necessary.
Suitable for all versions of the kernel > 2.6
Signed-off-by: Denis N Ladin <denladin@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
also known as Alcatel One Touch L100V LTE
The driver description files gives these names to the vendor specific
functions on this modem:
Application1: VID_1BBB&PID_011E&MI_00
Application2: VID_1BBB&PID_011E&MI_01
Modem: VID_1BBB&PID_011E&MI_03
Ethernet: VID_1BBB&PID_011E&MI_04
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include <linux/module.h>, so that the following errors are fixed:
drivers/usb/host/imx21-hcd.c:1929:20: error: expected declaration specifiers or '...' before string constant
drivers/usb/host/imx21-hcd.c:1930:15: error: expected declaration specifiers or '...' before string constant
drivers/usb/host/imx21-hcd.c:1931:16: error: expected declaration specifiers or '...' before string constant
drivers/usb/host/imx21-hcd.c:1932:14: error: expected declaration specifiers or '...' before string constant
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This
is a MEDIATEK inc. release patch.
Signed-off-by: Quentin.Li <snowmanli88@163.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: "David S. Miller" <davem@davemloft.net>
CC: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Andrew Hendry <andrew.hendry@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: "David S. Miller" <davem@davemloft.net>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Jon Maloy <jon.maloy@ericsson.com>
CC: Allan Stephens <allan.stephens@windriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: "J. Bruce Fields" <bfields@fieldses.org>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Sridhar Samudrala <sri@us.ibm.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
