Commit graph

1155 commits

Author SHA1 Message Date
Andreas Fleig
bc009eca8d USB: Add device quirk for Microsoft VX700 webcam
Add device quirk for Microsoft Lifecam VX700 v2.0 webcams.
Fixes squeaking noise of the microphone.

Signed-off-by: Andreas Fleig <andreasfleig@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11 16:01:07 -08:00
Oliver Neukum
07e72b95f5 USB: hub: handle claim of enabled remote wakeup after reset
Some touchscreens have buggy firmware which claims
remote wakeup to be enabled after a reset. They nevertheless
crash if the feature is cleared by the host.
Add a check for reset resume before checking for
an enabled remote wakeup feature. On compliant
devices the feature must be cleared after a reset anyway.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11 12:15:14 -08:00
Sarah Sharp
65bdac5eff USB: Handle warm reset failure on empty port.
An empty port can transition to either Inactive or Compliance Mode if a
newly connected USB 3.0 device fails to link train.  In that case, we
issue a warm reset.  Some devices, such as John's Roseweil eusb3
enclosure, slip back into Compliance Mode after the warm reset.

The current warm reset code does not check for device connect status on
warm reset completion, and it incorrectly reports the warm reset
succeeded.  This causes the USB core to attempt to send a Set Address
control transfer to a port in Compliance Mode, which will always fail.

Make hub_port_wait_reset check the current connect status and link state
after the warm reset completes.  Return a failure status if the device
is disconnected or the link state is Compliance Mode or SS.Inactive.

Make hub_events disable the port if warm reset fails.  This will disable
the port, and then bring it back into the RxDetect state.  Make the USB
core ignore the connect change until the device reconnects.

Note that this patch does NOT handle connected devices slipping into the
Inactive state very well.  This is a concern, because devices can go
into the Inactive state on U1/U2 exit failure.  However, the fix for
that case is too large for stable, so it will be submitted in a separate
patch.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72ab "usbcore: refine warm
reset logic"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Cc: stable@vger.kernel.org
2013-01-03 14:10:28 -08:00
Sarah Sharp
4f43447e62 USB: Ignore port state until reset completes.
The port reset code bails out early if the current connect status is
cleared (device disconnected).  If we're issuing a hot reset, it may
also look at the link state before the reset is finished.

Section 10.14.2.6 of the USB 3.0 spec says that when a port enters the
Error state or Resetting state, the port connection bit retains the
value from the previous state.  Therefore we can't trust it until the
reset finishes.  Also, the xHCI spec section 4.19.1.2.5 says software
shall ignore the link state while the port is resetting, as it can be in
an unknown state.

The port state during reset is also unknown for USB 2.0 hubs.  The hub
sends a reset signal by driving the bus into an SE0 state.  This
overwhelms the "connect" signal from the device, so the port can't tell
whether anything is connected or not.

Fix the port reset code to ignore the port link state and current
connect bit until the reset finishes, and USB_PORT_STAT_RESET is
cleared.

Remove the check for USB_PORT_STAT_C_BH_RESET in the warm reset case,
because it's redundant.  When the warm reset finishes, the port reset
bit will be cleared at the same time USB_PORT_STAT_C_BH_RESET is set.
Remove the now-redundant check for a cleared USB_PORT_STAT_RESET bit
in the code to deal with the finished reset.

This patch should be backported to all stable kernels.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
2013-01-03 14:10:26 -08:00
Sarah Sharp
77c7f072c8 USB: Increase reset timeout.
John's NEC 0.96 xHCI host controller needs a longer timeout for a warm
reset to complete.  The logs show it takes 650ms to complete the warm
reset, so extend the hub reset timeout to 800ms to be on the safe side.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Cc: stable@vger.kernel.org
2013-01-03 14:10:25 -08:00
Sarah Sharp
41e7e056cd USB: Allow USB 3.0 ports to be disabled.
If hot and warm reset fails, or a port remains in the Compliance Mode,
the USB core needs to be able to disable a USB 3.0 port.  Unlike USB 2.0
ports, once the port is placed into the Disabled link state, it will not
report any new device connects.  To get device connect notifications, we
need to put the link into the Disabled state, and then the RxDetect
state.

The xHCI driver needs to atomically clear all change bits on USB 3.0
port disable, so that we get Port Status Change Events for future port
changes.  We could technically do this in the USB core instead of in the
xHCI roothub code, since the port state machine can't advance out of the
disabled state until we set the link state to RxDetect.  However,
external USB 3.0 hubs don't need this code.  They are level-triggered,
not edge-triggered like xHCI, so they will continue to send interrupt
events when any change bit is set.  Therefore it doesn't make sense to
put this code in the USB core.

This patch is part of a series to fix several reports of infinite loops
on device enumeration failure.  This includes John, when he boots with
a USB 3.0 device (Roseweil eusb3 enclosure) attached to his NEC 0.96
host controller.  The fix requires warm reset support, so it does not
make sense to backport this patch to stable kernels without warm reset
support.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72ab "usbcore: refine warm
reset logic"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Cc: stable@vger.kernel.org
2013-01-03 14:10:23 -08:00
Sarah Sharp
8b8132bc3d USB: Ignore xHCI Reset Device status.
When the USB core finishes reseting a USB device, the xHCI driver sends
a Reset Device command to the host.  The xHC then updates its internal
representation of the USB device to the 'Default' device state.  If the
device was already in the Default state, the xHC will complete the
command with an error status.

If a device needs to be reset several times during enumeration, the
second reset will always fail because of the xHCI Reset Device command.
This can cause issues during enumeration.

For example, usb_reset_and_verify_device calls into hub_port_init in a
loop.  Say that on the first call into hub_port_init, the device is
successfully reset, but doesn't respond to several set address control
transfers.  Then the port will be disabled, but the udev will remain in
tact.  usb_reset_and_verify_device will call into hub_port_init again.

On the second call into hub_port_init, the device will be reset, and the
xHCI driver will issue a Reset Device command.  This command will fail
(because the device is already in the Default state), and
usb_reset_and_verify_device will fail.  The port will be disabled, and
the device won't be able to enumerate.

Fix this by ignoring the return value of the HCD reset_device callback.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
2013-01-03 14:10:22 -08:00
Sarah Sharp
1c7439c61f USB: Handle auto-transition from hot to warm reset.
USB 3.0 hubs and roothubs will automatically transition a failed hot
reset to a warm (BH) reset.  In that case, the warm reset change bit
will be set, and the link state change bit may also be set.  Change
hub_port_finish_reset to unconditionally clear those change bits for USB
3.0 hubs.  If these bits are not cleared, we may lose port change events
from the roothub.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
2013-01-03 14:10:21 -08:00
Linus Torvalds
a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Sachin Kamat
c058f7ab94 USB: core: Free the allocated memory before exiting on error
'new_interfaces' should be freed to avoid memory leak.

Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:32:26 -08:00
Bill Pemberton
2bd6a021e8 usb-core: remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:16 -08:00
Masanari Iida
02582e9bcc treewide: fix typo of "suport" in various comments and Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:16:09 +01:00
Greg Kroah-Hartman
0c864d8b3e Merge 3.7-rc6 into usb-next.
This resolves a conflict with these files:
	drivers/usb/early/ehci-dbgp.c
	drivers/usb/host/ehci-ls1x.c
	drivers/usb/host/ohci-xls.c
	drivers/usb/musb/ux500.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 18:46:21 -08:00
Peter Chen
ac96511bb5 usb: phy: change phy notify connect/disconnect API
The old parameter "port" is useless for phy notify, as one usb
phy is only for one usb port. New parameter "speed" stands for
the device's speed which is on the port, this "speed" parameter
is needed at some platforms which will do some phy operations
according to device's speed.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Mike Thompson <mpthompson@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:44:51 -08:00
Peter Chen
b76baa8154 usb: refine phy notify operation during connection and disconnection
At commit 925aa46ba9, Richard Zhao
<richard.zhao@freescale.com> adds the phy notification callback
when port change occurs. In fact, this phy notification should
be added according to below rules:

1. Only set HW_USBPHY_CTRL.ENHOSTDISCONDETECT
during high speed host mode.
2. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT
during the reset and speed negotiation period.
3. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT
during host suspend/resume sequence.

Please refer: i.mx23RM(page: 413) for below rules.
http://www.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf

Freescale i.MX SoC, i.mx23, i.mx28 and i.mx6(i.mx6SL does not
need to follow the 3rd rule) need to follow above rules.

Current code set connect notification (HW_USBPHY_CTRL.ENHOSTDISCONDETECT)
at hub_port_connect_change, it conflicts with above the 2th rule.

The correct notification setting method should be:
1. Set connect notify after the second bus reset.
2. Set disconnect notify after disconnection.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Mike Thompson <mpthompson@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:44:51 -08:00
Hindin Joseph
c13b86a336 USB: fix authorization and claimed port logic
It looks like I've run into some inconsistency in the USB stack behavior.

    The USB stack maintains, among others, two states for the attach
USB device: authorized and owned. Authorization state is accessible to
the user space code through correspondent sysfs files, the ownership
can be set by claiming the hub's port with ioctl call. Both state may
be set before the device is attached, by access the hub settings. When
the new device is attached, both authorization and ownership prevent
the kernel USB stack from setting the newly attached device
configuration, but when the device is authorized, the ownership state
is ignored. It looks like ignoring the ownership state on
authorization make the stack behavior inconsistent; it also prevents
the user space code from completely overriding configuration
selection, important for implementing workarounds for bugs in the
device configuration selection.

   The following patch makes the stack behavior more consistent, by
moving ownership test into usb_choose_configuration - the later
function is used both by generic_probe and usb_authorize_device

Signed-off-by: Joseph Hindin <hindin@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 16:56:22 -08:00
Greg Kroah-Hartman
e592c5d0b7 Revert "USB/host: Cleanup unneccessary irq disable code"
This reverts commit 73d4066055.

Martin Steigerwald reported that this change caused a hard lockup when
using USB if threadirqs are enabled.  Thomas pointed out that this patch
is incorrect, and can cause problems.  So revert it to get the
previously working functionality back.

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-13 10:52:52 -08:00
Alan Stern
2f02bc8af3 USB: report submission of active URBs
This patch (as1633) changes slightly the way usbcore handled
submissions of URBs that are already active.  It will now return
-EBUSY rather than -EINVAL, and it will call WARN_ONCE to draw
people's attention to the bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11 18:10:46 -08:00
Alan Stern
36caff5d79 USB: fix endpoint-disabling for failed config changes
This patch (as1631) fixes a bug that shows up when a config change
fails for a device under an xHCI controller.  The controller needs to
be told to disable the endpoints that have been enabled for the new
config.  The existing code does this, but before storing the
information about which endpoints were enabled!  As a result, any
second attempt to install the new config is doomed to fail because
xhci-hcd will refuse to enable an endpoint that is already enabled.

The patch optimistically initializes the new endpoints' device
structures before asking the device to switch to the new config.  If
the request fails then the endpoint information is already stored, so
we can use usb_hcd_alloc_bandwidth() to disable the endpoints with no
trouble.  The rest of the error path is slightly more complex now; we
have to disable the new interfaces and call put_device() rather than
simply deallocating them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Matthias Schniedermeyer <ms@citd.de>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11 18:06:48 -08:00
Alan Stern
571e41214e USB: remove iteration limit in hub_tt_work()
This patch (as1621) removes the limit on the number of loops allowed
in hub_tt_work().  The value is arbitrary, and it's silly to have a
limit in the first place -- anything beyond the limit would not get
handled.

Besides, it's most unlikely that we'll ever need to clear more than a
couple of TT buffers at any time.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31 12:48:07 -07:00
Joe Perches
f2ec522e78 usb: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-30 12:32:03 -07:00
Greg Kroah-Hartman
b472b8e22f Merge 3.7-rc3 into usb-next.
This pulls in all of the USB changes in 3.7-rc3 into usb-next and
resolves the merge issue with:
	drivers/usb/misc/ezusb.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 09:04:39 -07:00
Ming Lei
596d789a21 USB: set hub's default autosuspend delay as 0
This patch sets hub device's default autosuspend delay as 0 to
speedup bus suspend, see comments in code for details.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 11:45:32 -07:00
Ming Lei
e6f30deafe USB: check port changes before hub runtime suspend for some bug device
The hub status endpoint has a long 'bInterval', which is 255ms
for FS/LS device and 256ms for HS device according to USB 2.0 spec,
so the device connection change may be reported later more than 255ms
via status pipe.

The connection change in hub may have been happened already on the
downstream ports, but no status URB completes when it is killed
in hub_suspend(auto), so the connection change may be missed by some
buggy hub devices, which won't generate remote wakeup signal after
their remote wakeup is enabled and they are put into suspend state.

The problem can be observed at least on the below Genesys Logic, Inc.
hub devices:

	0x05e3,0x0606
	0x05e3,0x0608

In theory, there is no way to fix the problem completely, but we
can make it less likely to occur by this patch.

This patch introduces one quirk of HUB_QUIRK_CHECK_PORTS_AUTOSUSPEND
to check ports' change during hub_suspend(auto) for the buggy
devices. If ports' change is found, terminate the auto suspend and
return to working state.

So for the buggy hubs, if the connection change happend before
the ports' check, it can be handled correctly. If it happens between
the ports' check and enabling remote wakeup/entering suspend, it
will be missed. Considered the interval is quite short, it is very
less likely to happen during the window.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 11:45:32 -07:00
Alan Stern
bfd1e91013 USB: speed up usb_bus_resume()
This patch (as1620) speeds up USB root-hub resumes in the common case
where every enabled port has its suspend feature set (which currently
will be true for every runtime resume of the root hub).  If all the
enabled ports are suspended then resuming the root hub won't resume
any of the downstream devices.  In this case there's no need for a
Resume Recovery delay, because that delay is meant to give devices a
chance to get ready for active use.

To keep track of the port suspend features, the patch adds a
"port_is_suspended" flag to struct usb_device.  This has to be tracked
separately from the device's state; it's entirely possible for a USB-2
device to be suspended while the suspend feature on its parent port is
clear.  The reason is that devices will go into suspend whenever their
parent hub does.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 14:51:22 -07:00
Alan Stern
969ddcfc95 USB: hub_for_each_child should skip unconnected ports
This patch (as1619) improves the interface to the "hub_for_each_child"
macro.  The name clearly suggests that the macro iterates over child
devices; it does not suggest that the loop will also iterate over
unnconnected ports.

The patch changes the macro so that it will skip over unconnected
ports and iterate only the actual child devices.  The two existing
call sites are updated to avoid testing for a NULL child pointer,
which is now unnecessary.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 14:51:21 -07:00
Yuanhan Liu
30b1e495b8 USB: use bus_to_hdc instead of container_of
We defined bus_to_hdc for that, use it.

Signed-off-by: Yuanhan Liu <yliu.null@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 14:40:50 -07:00
Octavian Purdila
036546bf95 usb hub: use flush_work instead of flush_work_sync
flush_work_sync and flush_work are now the same and flush_work_sync
has been deprecated. This fixes the following warning:

drivers/usb/core/hub.c: In function hub_quiesce:
drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-23 19:58:07 -07:00
Octavian Purdila
3b6054da68 usb hub: send clear_tt_buffer_complete events when canceling TT clear work
There is a race condition in the USB hub code with regard to handling
TT clear requests that can get the HCD driver in a deadlock. Usually
when an TT clear request is scheduled it will be executed immediately:

<7>[    6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[    6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[    6.078299] hub_tt_work:731
<7>[    9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us]
<7>[    9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule
<7>[    9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us]
<7>[    9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us]
<7>[   10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[   10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[   10.116537] hub_tt_work:731

However, if a suspend operation is triggered before hub_tt_work is
scheduled, hub_quiesce will cancel the work without notifying the HCD
driver:

<3>[   35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80
<5>[   35.034022] sd 0:0:0:0: [sda] Stopping disk
<7>[   35.034039] hub 2-1:1.0: hub_suspend
<7>[   35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us]
<7>[   35.035085] hub 1-0:1.0: hub_suspend
<7>[   35.035102] usb usb1: bus suspend, wakeup 0
<7>[   35.035106] ehci_hcd 0000:00:1a.0: suspend root hub
<7>[   35.035298] hub 2-0:1.0: hub_suspend
<7>[   35.035313] usb usb2: bus suspend, wakeup 0
<7>[   35.035315] ehci_hcd 0000:00:1d.0: suspend root hub
<6>[   35.250017] PM: suspend of devices complete after 216.979 msecs
<6>[   35.250822] PM: late suspend of devices complete after 0.799 msecs
<7>[   35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1
<7>[   35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot
<7>[   35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1
<7>[   35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot
<6>[   35.274254] PM: noirq suspend of devices complete after 23.442 msecs
<6>[   35.274975] ACPI: Preparing to enter system sleep state S3
<6>[   35.292666] PM: Saving platform NVS memory
<7>[   35.295030] Disabling non-boot CPUs ...
<6>[   35.297351] CPU 1 is now offline
<6>[   35.300345] CPU 2 is now offline
<6>[   35.303929] CPU 3 is now offline
<7>[   35.303931] lockdep: fixing up alternatives.
<6>[   35.304825] Extended CMOS year: 2000

When the device will resume the EHCI driver will get stuck in
ehci_endpoint_disable waiting for the tt_clearing flag to reset:

<0>[   47.610967] usb 2-1.3: **** DPM device timeout ****
<7>[   47.610972]  f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0
<7>[   47.610983]  15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30
<7>[   47.610993]  c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001
<7>[   47.611004] Call Trace:
<7>[   47.611006]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611019]  [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0
<7>[   47.611026]  [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50
<7>[   47.611034]  [<c17592d3>] ? schedule_timeout+0x133/0x290
<7>[   47.611044]  [<c175b43e>] schedule+0x1e/0x50
<7>[   47.611051]  [<c17592d8>] schedule_timeout+0x138/0x290
<7>[   47.611057]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611063]  [<c103e560>] ? usleep_range+0x40/0x40
<7>[   47.611070]  [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20
<7>[   47.611077]  [<c14935f4>] ehci_endpoint_disable+0x64/0x160
<7>[   47.611084]  [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0
<7>[   47.611092]  [<c1165663>] ? sysfs_add_file+0x13/0x20
<7>[   47.611100]  [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40
<7>[   47.611107]  [<c147fafc>] usb_disable_endpoint+0x5c/0x80
<7>[   47.611111]  [<c147fb57>] usb_disable_interface+0x37/0x50
<7>[   47.611116]  [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640
<7>[   47.611122]  [<c1474665>] ? hub_port_status+0xb5/0x100
<7>[   47.611129]  [<c147a975>] usb_port_resume+0xd5/0x220
<7>[   47.611136]  [<c148877f>] generic_resume+0xf/0x30
<7>[   47.611142]  [<c14821a3>] usb_resume+0x133/0x180
<7>[   47.611147]  [<c1473b10>] ? usb_dev_thaw+0x10/0x10
<7>[   47.611152]  [<c1473b1d>] usb_dev_resume+0xd/0x10
<7>[   47.611157]  [<c13baa60>] dpm_run_callback+0x40/0xb0
<7>[   47.611164]  [<c13bdb03>] ? pm_runtime_enable+0x43/0x70
<7>[   47.611171]  [<c13bafc6>] device_resume+0x1a6/0x2c0
<7>[   47.611177]  [<c13ba940>] ? dpm_show_time+0xe0/0xe0
<7>[   47.611183]  [<c13bb0f9>] async_resume+0x19/0x40
<7>[   47.611189]  [<c10580c4>] async_run_entry_fn+0x64/0x160
<7>[   47.611196]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611203]  [<c104a24c>] ? process_one_work+0x10c/0x480
<7>[   47.611209]  [<c104a2c0>] process_one_work+0x180/0x480
<7>[   47.611215]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611220]  [<c1058060>] ? async_schedule+0x10/0x10
<7>[   47.611226]  [<c104c15c>] worker_thread+0x11c/0x2f0
<7>[   47.611233]  [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0
<7>[   47.611239]  [<c10507f8>] kthread+0x78/0x80
<7>[   47.611244]  [<c1750000>] ? timer_cpu_notify+0xd6/0x20d
<7>[   47.611253]  [<c1050780>] ? __init_kthread_worker+0x60/0x60
<7>[   47.611258]  [<c176357e>] kernel_thread_helper+0x6/0xd
<7>[   47.611283] ------------[ cut here ]------------

This patch changes hub_quiesce behavior to flush the TT clear work
instead of canceling it, to make sure that no TT clear request remains
uncompleted before suspend.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 11:34:41 -07:00
Alan Stern
a03bede5c7 USB: update documentation for URB_ISO_ASAP
This patch (as1611) updates the USB documentation and kerneldoc to
give a more precise meaning for the URB_ISO_ASAP flag and to explain
more of the details of scheduling for isochronous URBs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 11:10:24 -07:00
Henrik Rydberg
014639003c usbdevfs: Fix broken scatter-gather transfer
The handling of large output bulk transfers is broken; the same user
page is read over and over again. Fixed with this patch.

Cc: stable <stable@vger.kernel.org>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17 13:41:34 -07:00
Greg Kroah-Hartman
b001b29791 USB 3.0 Link PM fixes.
Hi Greg,
 
 Here's four fixes for the USB 3.0 Link Power Management code.  They
 work around some USB 3.0 devices that don't support LPM, like the
 Western Digital My Passport hard drive.  They also fix an LPM disable
 ref count bug that would cause LPM to remain disabled for a device
 after a failed probe.
 
 Please queue for 3.7 after the merge window closes.  Several patches are
 marked for stable.
 
 Sarah Sharp
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQdzkvAAoJEBMGWMLi1Gc5GyYP/1RoDNMNVS+AZVxaoC6t6FhT
 rWyg74vWZqnfrf6XKnZshELjJ5rK52ZvKykmnAjIXT0y9D9bOKxkxi0008GMeGNO
 UulYZH5TAxlCsIqjzYmb87lJ42+CzNOhWrCNwQdn5BdM/gypDHcKx7kb2b+Jljky
 Xe6mdSDo+KGScBRLJPPvAIuk/IsZIFarcZruYP55PPJ44Q9LWR4Uq8zm6t8qJYkP
 0s8KNHYXeKZBg2z50iILo7WWRoNIHvAH9xJigU5T2QQCSzBeE/ILkNzkkSrBfoJp
 0DAV9fpdkYLhx1aSp628uorcn4D0lOCSoCasVdgeUSdi/XVpJWU1DbAPljfPK7lH
 JBS4ba3s6/25Dl+BRgz+MUq6PBbAexmqg+5jhTkP2GKU8nSsXI1ZkahjRFgAgWxC
 FRHhNINTq56rnY3s3Ts30pjtZ9tai7BnWVKU9/0cNeaks8OMZ0ANBr/j2qkm+Jjg
 lBZtyxsg73yt/PDLZuJPnULMJ1QQZoIsJXZcBxLNcYtpCC/0AdH8bl/PdCjAcnUt
 RL1BLcWLLqIki90LHx/aPx2UCmhtOv8JWzJ5vgysh89BqNLWFhuJHF615nlSkwQj
 UkjcLWmVwT52+00gkD/cWWgueOkTx0Aokb6l3tYckyWk3d4BOshaWQL54haTvqQL
 5fz9MQUslawTDjv7igT+
 =n/bA
 -----END PGP SIGNATURE-----

Merge tag 'for-usb-linus-2012-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

USB 3.0 Link PM fixes.

Hi Greg,

Here's four fixes for the USB 3.0 Link Power Management code.  They
work around some USB 3.0 devices that don't support LPM, like the
Western Digital My Passport hard drive.  They also fix an LPM disable
ref count bug that would cause LPM to remain disabled for a device
after a failed probe.

Please queue for 3.7 after the merge window closes.  Several patches are
marked for stable.

Sarah Sharp
2012-10-13 14:10:30 -07:00
Sarah Sharp
1510a1a2d0 usb: trival: Fix debugging units mistake.
SEL and PEL are in microseconds, not milliseconds.  Also, fix a split
string that will trigger checkpatch warnings.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-10-08 11:48:41 -07:00
Sarah Sharp
65a95b75bc usb: Send Set SEL before enabling parent U1/U2 timeout.
The Set SEL control transfer tells a device the exit latencies
associated with a device-initated U1 or U2 exit.  Since a parent hub may
initiate a transition to U1 soon after a downstream port's U1 timeout is
set, we need to make sure the device receives the Set SEL transfer
before the parent hub timeout is set.

This patch should be backported to kernels as old as 3.5, that contain
the commit 1ea7e0e8e3 "USB: Add support to
enable/disable USB3 link states."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
2012-10-08 11:48:28 -07:00
Sarah Sharp
ae8963adb4 usb: Don't enable LPM if the exit latency is zero.
Some USB 3.0 devices signal that they don't implement Link PM by having
all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS
descriptor.  Don found that a Western Digital device he has experiences
transfer errors when LPM is enabled.  The lsusb shows the U1/U2 exit
latencies are set to zero:

Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds

The fix is to not enable LPM for a particular link state if we find its
corresponding exit latency is zero.

This patch should be backported to kernels as old as 3.5, that contain
the commit 1ea7e0e8e3 "USB: Add support to
enable/disable USB3 link states."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: stable@vger.kernel.org
2012-10-08 11:48:07 -07:00
Sarah Sharp
d01f87c0ff USB: Enable LPM after a failed probe.
Before a driver is probed, we want to disable USB 3.0 Link Power
Management (LPM), in case the driver needs hub-initiated LPM disabled.
After the probe finishes, we want to attempt to re-enable LPM, order to
balance the LPM ref count.

When a probe fails (such as when libusual doesn't want to bind to a USB
3.0 mass storage device), make sure to balance the LPM ref counts by
re-enabling LPM.

This patch should be backported to kernels as old as 3.5, that contain
the commit 8306095fd2 "USB: Disable USB
3.0 LPM in critical sections."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
2012-10-08 11:47:40 -07:00
Linus Torvalds
d8dc91b753 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pul ACPI & Power Management updates from Len Brown:
 - acpidump utility added
 - intel_idle driver now supports IVB Xeon
 - turbostat utility can now count SMIs
 - ACPI can now bind to USB3 hubs
 - misc fixes

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
  ACPI: Add new sysfs interface to export device description
  ACPI: Harden acpi_table_parse_entries() against BIOS bug
  tools/power/turbostat: add option to count SMIs, re-name some options
  tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
  intel_idle: enable IVB Xeon support
  tools/power turbostat: add [-m MSR#] option
  tools/power turbostat: make -M output pretty
  tools/power turbostat: print more turbo-limit information
  tools/power turbostat: delete unused line
  tools/power turbostat: run on IVB Xeon
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  ACPI: run _OSC after ACPI_FULL_INITIALIZATION
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  tools/power/acpi/acpidump: version 20071116
  tools/power/acpi/acpidump: version 20070714
  tools/power/acpi/acpidump: version 20060606
  tools/power/acpi/acpidump: version 20051111
  xo15-ebook: convert to module_acpi_driver()
  ...
2012-10-08 07:14:06 +09:00
Len Brown
3f44ea0d1c Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', 'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release
add acpidump utility
intel_idle driver now supports IVB Xeon
turbostat can now count SMIs
ACPI can now bind to USB3 hubs
misc fixes
2012-10-06 16:00:32 -04:00
Alan Stern
0d00dc2611 USB: Fix race condition when removing host controllers
This patch (as1607) fixes a race that can occur if a USB host
controller is removed while a process is reading the
/sys/kernel/debug/usb/devices file.

The usb_device_read() routine uses the bus->root_hub pointer to
determine whether or not the root hub is registered.  The is not a
valid test, because the pointer is set before the root hub gets
registered and remains set even after the root hub is unregistered and
deallocated.  As a result, usb_device_read() or usb_device_dump() can
access freed memory, causing an oops.

The patch changes the test to use the hcd->rh_registered flag, which
does get set and cleared at the appropriate times.  It also makes sure
to hold the usb_bus_list_lock mutex while setting the flag, so that
usb_device_read() will become aware of new root hubs as soon as they
are registered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Don Zickus <dzickus@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27 09:17:49 -07:00
Alan Stern
0a2314035c USB: Fix race condition when removing host controllers
This patch (as1607) fixes a race that can occur if a USB host
controller is removed while a process is reading the
/sys/kernel/debug/usb/devices file.

The usb_device_read() routine uses the bus->root_hub pointer to
determine whether or not the root hub is registered.  The is not a
valid test, because the pointer is set before the root hub gets
registered and remains set even after the root hub is unregistered and
deallocated.  As a result, usb_device_read() or usb_device_dump() can
access freed memory, causing an oops.

The patch changes the test to use the hcd->rh_registered flag, which
does get set and cleared at the appropriate times.  It also makes sure
to hold the usb_bus_list_lock mutex while setting the flag, so that
usb_device_read() will become aware of new root hubs as soon as they
are registered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Don Zickus <dzickus@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26 10:21:08 -07:00
Greg Kroah-Hartman
a0693bd0aa Revert "usb : Add sysfs files to control port power."
This reverts commit ca9c9d0c92.

Rafael wants more time to work on the user api to handle port power
issues, so let's just revert the sysfs changes for now.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Lan Tianyu <tianyu.lan@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-24 13:04:02 -07:00
Feng Tang
59e6423ba8 usb-acpi: Comply with the ACPI API change
acpi_get_physical_device_location()'s 2nd argument has been changed
in ACPI implementaion, so need a follow-on change in
usb_acpi_check_pld().

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 00:32:51 -04:00
Greg Kroah-Hartman
eb83be9855 USB: remove CONFIG_EXPERIMENTAL dependancies
As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means
nothing, so let's get rid of it.

Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17 23:00:15 -07:00
Alan Cox
ac08de32d2 usb: remove junk from store_remove_id
retval is 0, and carefully assigned - and tested as non zero.

This is not useful. While we are at it remove some other bogus initialisation
in the function

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17 15:10:57 -07:00
Greg Kroah-Hartman
2bcb132c69 Merge 3.6-rc6 into usb-next
This resolves the merge problems with:
	drivers/usb/dwc3/gadget.c
	drivers/usb/musb/tusb6010.c
that had been seen in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16 20:42:46 -07:00
Greg Kroah-Hartman
c2d57aec81 USB: core: remove unused dbg() call in message.c
It's not needed, and commented out, so just remove it.

Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-13 11:23:03 -07:00
Alexander Shishkin
1f2235b8e7 usb: move children deallocation after quiescing the hub
Commit ff823c79a5 ("usb: move children
to struct usb_port") forgot to consider the hub_disconnect sequence,
which releases ports before quiescing the hub, which will lead to a
use-after-free, since hub_quiesce() will try to disconnect ports'
children, which are already deallocated. Simple modprobe dummy_hcd &&
rmmod dummy_hcd will illustrate the problem.

This patch moves deallocation of hub's ports after hub_quiesce() call
in hub_disconnect().

Cc: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12 10:00:51 -07:00
Chuansheng Liu
73d4066055 USB/host: Cleanup unneccessary irq disable code
Because the IRQF_DISABLED as the flag is now a NOOP and has been
deprecated and in hardirq context the interrupt is disabled.

so in usb/host code:
Removing the usage of flag IRQF_DISABLED;
Removing the calling local_irq save/restore actions in irq
handler usb_hcd_irq();

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10 20:22:35 -07:00
Lan Tianyu
ca3c1539ad usb: add little-endian transform for DeviceRemovable of usb3.0 hub
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10 15:27:37 -07:00
Lan Tianyu
ca9c9d0c92 usb : Add sysfs files to control port power.
This patch adds two sysfs files for each usb hub port to allow userspace
to control the port power policy.

For an upcoming Intel xHCI roothub, this will translate into ACPI calls
to completely power off or power on the port.  As a reminder, when these
ports are completely powered off, the USB host and device will see a
physical disconnect.  All future USB device connections will be lost,
and the device will not be able to signal a remote wakeup.

The control sysfs file can be written to with two options:
"on" - port power must be on.
"off" - port must be off.

The state sysfs file reports usb port's power state:
"on" - powered on
"off" - powered off
"error" - can't get power state

For now, let userspace dictate the port power off policy.  Future
patches may add an in-kernel policy.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10 13:04:01 -07:00