Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a)
Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue with the i2c that prevented the xc5000 from working.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch introduces support for dvb-t for the following dibcom based
cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736)
Signed-off-by: Albert Comerma <albert.comerma@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08).
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by BOUWSMA Barry the readout of the signal status doesn't work
on dec3000-s models. Since we don't know how to do it better, revert back
to the old behaviour and always report a signal lock.
Reported by Barry Bouwsma
Signed-off-by: Peter Beutner <p.beutner@gmx.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's
i2c implementation where it did not properly support a single i2c read request
(sending it as an i2c write request instead). Version 1.20 of the firmware
added support for a new i2c API which supported such requests.
This change defaults to fw 1.20 for all devices, but does not default to using
the new i2c API (since initial testing suggests problems interacting with the
mt2060). Maintainers can enable the use of the new i2c API by putting
the following into their frontend initialization:
struct dib0700_state *st = adap->dev->priv;
st->fw_use_new_i2c_api = 1;
Also note that the code expects i2c repeated start to be supported. If the
i2c slave does not support repeated start, i2c messsages should have the
I2C_M_NOSTART flag set.
Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue as well as example i2c code utilizing the interface.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thanks to Ilia Penev for the tip-off that this device is much the same as
(identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints:
http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html
DVB functionality tested OK with xine using the usual dib0700 firmware.
This diff is based on the latest latest linuxtv.org v4l-dvb mercurial
repo.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for ST STV0288 demodulator and cards with it,
such as TeVii S420.
Patch is co-authored with Georg Acher <acher@baycom.de>
Signed-off-by: Georg Acher <acher@baycom.de>
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We don't want to push the ISDB-T definitions into the kernel until
we have a high level of confidence in the ISDB-T API. More testing
is required before this code is released.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for USB card modification with SI2109/2110 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for Silicon Laboratories SI2109/2110 demodulator
and cards with it, such as DvbWorld PCI2002.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
From the author:
Here is a simple patch detailing some reverse engineered
register detail lost in my latest merge. The comments
in the code refer to this register but it is never
defined. This corrects this.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adjust MPEG initialization in cx24116 in order to accomodate different
MPEG CLK position and polarity in different cards. For example, HVR4000
uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG
stream was broken on that cards for symbol rates > 30000 kSyms/s.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the debugging sysctls.
Rolloff was broken, not it works as expected and has been tested in kaffeine.
Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for DvbWorld 2004 DVB-S2 PCI adapter.
The card contains dm1105 PCI chip and cx24116 demodulator
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
I was given these changes by Darron Broad and Igor Liplianin and represent a series
of patches they've been making to the cx24116 driver over the last two years.
Changes for handling symbolrates >30Ksps
Tone handling changes.
Diseqc support.
Sleep support, shutting down the clocks correctly.
Cleanup on ROLL_OFF and PILOT support.
*** ST - We need to cleanup the sysclt control, this is abnormal
in a demod driver. We should work towards understanding the missing
API's and ensure we have them in S2API. ***
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for SDMC DM1105 PCI chip. There is a lot of
cards based on it, like DvbWorld 2002 DVB-S , 2004 DVB-S2
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Many thanks to Darron Broad for pointing out the obvious.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Also added some compat code for the older API.
Added more ISDB message/command suggestions, current not connected in dvb-core.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The frontends will be notified (if they chose) of all _get and _set commands
so they can help determine result or action. Results are now returned
to userspace correctly.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The API now assumes that ioctl calls for FE_SET_PROPERTY and all
set commands, and FE_GET_PROPERTY are get commands.
Simplification.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This helps complex demods which support different modulation types
be better informed.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
For demod drivers, we want a single tuning function (set_frontend) to have
access to the properly constructed dvb_frontend_parameters structure, or
the cache values - regardless of whether the legacy or new API is being used.
This cuts down on redundant code in the demod drivers and ensures the
tuning parameters are consistent regardless of the API entry type.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After discussion the following changes were made:
1. Removed the typedefs in frontend.h, use structures.
2. In the frontend.h, remove the 16 command limit on the API and
switch to a flexible variable length API. For practical reasons
a #define limits this to 64, this should be discussed.
3. Changed dvb-core ioctl handing to deal with variable sequences
of commands.
tune-v0.0.3.c is required to use this API, it contains the interface changes.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The group preferred dtv_ over tv_, this implements it.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adjust MPEG initialization in cx24116 in order to accomodate different
MPEG CLK position and polarity in different cards.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx24116: Fix lock for high (above 30000 kSyms) symbol rates
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change menu item in Kconfig for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
This cards based on cx24116 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thanks to Hans Werner for finding the problem.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
SET_TONE and SET_VOLTAGE were not previously implemented. Two options
existed. Either cut/paste from the previous ioctl handler into the
process_properties function, which is code duplication. Or, split
the current ioctl handler into it's two major pieces.
Piece 1, responsible for input validation and semaphore acquiring
Piece 2 the processing of the previous ioctls
and finally, a new third pieces where the array of properties
is processed, and can freely call the legacy ioctl handler without
having to re-acquire the fepriv->sem semaphore. This is a clean approach
and ensures the existing legacy ioctls are processed as they were previously
(but with an extra function call) and allows the new API to share code
without duplication.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adds support for the COnexant cx24116 DVB-S2 demodulator.
TODO: checkpatch cleanup.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is an experimental patch to add a new tuning mechanism for
dvb frontends. Rather than passing fixed structures across the
user/kernel boundary, which need to be revised for each new modulation
type (or feature the kernel developers want to add), this implements
a simpler message based approach, allowing fe commands to be broken
down into a series of small fixed size transactions, presented
in an array.
The goal is to avoid changing the user/kernel ABI in the future, by
simply creating new frontend commands (and sequencies of commands) that
help us add support for brand new demodulator, delivery system or
statistics related commmands.
known issues:
checkpatch voilations
feedback from various developers yet to be implemented, relating
to namespace conventions, variable length array passing conventions,
and generally some optimization.
This patch should support all existing tuning mechanisms through the
new API, as well as adding 8PSK, DVB-S2 NBC-QPSK and ISDB-T API support.
For testing and exercise purposes, see the latest tune.c tool
available from http://www.steventoth.net/linux/s2
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- Add USB ID for Telestar Starstick 2 (10b9:8000)
Signed-off-by: Mikko Ohtamaa <mikko@redinnovation.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- initial driver for the Afatech AF9015 chipset
Thanks-to: Mark Spieth <mark@digivation.com.au>
Thanks-to: Lee Essen <lee.essen@nowonline.co.uk>
Thanks-to: Luca Olivetti <luca@ventoso.org>
Thanks-to: Andrew Leech <andrew@floppyspongeonline.com>
Thanks-to: Nick Andrew <nick-linuxtv@nick-andrew.net>
Thanks-to: Rafael Antoniello <rafael.antoniello@gmail.com>
Thanks-to: Jarryd Beck <jarro.2783@gmail.com>
Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net>
Thanks-to: Benjamin Larsson <banan@ludd.ltu.se>
Thanks-to: Wolfgang Breyha <wbreyha@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- initial driver for the Afatech AF9013 demodulator
Signed-off-by: Antti Palosaari <crope@iki.fi>
[mchehab.redhat.com: having a global var called 'debug' is not a good idea. rename it to af9013_debug]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
adapter_nr mod option does not make sense for budget-core since it is only
common code shared by all budget drivers
Signed-off-by: Janne Grunau <janne-dvb@grunau.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The dib7000m_i2c_enumeration() function is not used by any public drivers,
however some prototype board use it. So '#if 0' for now, but don't remove it.
Thanks to Patrick Boettcher for clarifying this.
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix sparse warnings. None are serious, but cutting down on these helps find
future serious sparse warnings/errors.
Redid the av7710.c patch based on a suggestion by Oliver Endriss.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Supply callback to load firmware for the TDHD1 tuner (using request_firmware).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for the 'full-ts' hardware modification.
On full-featured cards the data throughput is limited by the hardware
design. The full-ts mod removes this bottleneck, i.e. the card is able
to deliver the complete transport stream of a transponder.
For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
