Commit graph

244379 commits

Author SHA1 Message Date
Matthew Garrett
21a8d026e0 x86 platform drivers: Build fix for intel_pmic_gpio
Fix an incorrect function name so the driver builds.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-04-13 11:52:16 -04:00
Linus Torvalds
6631e635c6 block: don't flush plugged IO on forced preemtion scheduling
We really only want to unplug the pending IO when the process actually
goes to sleep.  So move the test for flushing the plug up to the place
where we actually deactivate the task - where we have properly checked
for preemption and for the process really sleeping.

Acked-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-13 08:08:20 -07:00
Linus Torvalds
a626ca6a65 vm: fix vm_pgoff wrap in stack expansion
Commit 982134ba62 ("mm: avoid wrapping vm_pgoff in mremap()") fixed
the case of a expanding mapping causing vm_pgoff wrapping when you used
mremap.  But there was another case where we expand mappings hiding in
plain sight: the automatic stack expansion.

This fixes that case too.

This one also found by Robert Święcki, using his nasty system call
fuzzer tool.  Good job.

Reported-and-tested-by: Robert Święcki <robert@swiecki.net>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-13 08:07:28 -07:00
Andreas Bießmann
24a1a47562 avr32: add ATAG_BOARDINFO
The ATAG_BOARDINFO is intended to hand over the information
bd->bi_board_number from u-boot to the kernel.

This piece of information can be used to implement some kind of board
identification while booting the kernel. Therefore it is placed in .initdata
section and can be accessed via the new symbol board_number only while
initializing the kernel.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:59 +02:00
Uwe Kleine-König
c7d876321f don't check platform_get_irq's return value against zero
platform_get_irq returns -ENXIO on failure, so !int_irq was probably
always true.  Better use (int)int_irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228f9 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.

Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:57 +02:00
Matt Fleming
9f0d15aac9 avr32: init cannot ignore signals sent by force_sig_info()
We can delete the code that checks to see if we're sending an ignored
signal to init because force_sig_info() already handles this case.
force_sig_info() will kill init even if the signal handler is SIG_DFL
and the scenario described in the comment where init might "generate
the same exception over and over again" cannot occur (force_sig_info()
clears SIGNAL_UNKILLABLE to ensure that init will die).

Also, the use of is_global_init() is not correct in the multhreaded
case, as Oleg Nesterov explains,

	"is_global_init() is not right in theory, /sbin/init can be
	multithreaded. And, this doesn't cover the sub-namespace
	inits... I'd suggest to check SIGNAL_UNKILLABLE, but looking
	closer I think you can simply remove this code."

It seems this code was copied from arch/powerpc in March 2007 in commit

  623b0355d5 "[AVR32] Clean up exception handling code"

but the code was deleted from arch/powerpc in November 2009 in commit

  a0592d42fe "powerpc: kill the obsolete code under is_global_init()"

So catch up with powerpc and delete the bogus code.

Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:55 +02:00
Ole Henrik Jahren
6e2ad51190 avr32: fix deadlock when reading clock list in debugfs
When writing out /sys/kernel/debug/at32ap_clk, clock list lock is being
held while clk_get() is called. clk_get() attempts to take the same
lock, which results in deadlock. Introduce and call lock free version,
__clk_get(), instead.

Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:52 +02:00
Ben Hutchings
51ef85d8f9 avr32: Fix .size directive for cpu_enter_idle
gas used to accept (and ignore?) .size directives which referred to
undefined symbols, as this does.  In binutils 2.21 these are treated
as errors.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
024b3f2936 avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype
introduce in commit d75f1bfdbc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:45 +02:00
Wanlong Gao
8faf9e3838 fix the wrong argument of the functions definition
The functions of eic_chip's memebers use the wrong argument .

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13 15:46:37 +02:00
Jozsef Kadlecsik
eafbd3fde6 netfilter: ipset: set match and SET target fixes
The SET target with --del-set did not work due to using wrongly
the internal dimension of --add-set instead of --del-set.
Also, the checkentries did not release the set references when
returned an error. Bugs reported by Lennert Buytenhek.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-13 13:45:57 +02:00
Jozsef Kadlecsik
0e8a835aa5 netfilter: ipset: bitmap:ip,mac type requires "src" for MAC
Enforce that the second "src/dst" parameter of the set match and SET target
must be "src", because we have access to the source MAC only in the packet.
The previous behaviour, that the type required the second parameter
but actually ignored the value was counter-intuitive and confusing.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-13 13:43:23 +02:00
Patrick McHardy
b32e3dc786 Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2011-04-13 13:32:28 +02:00
Maksim Rayskiy
1dcffad741 UBIFS: fix compilation warnings when compiling with gcc 4.5
When compiling UBIFS with CONFIG_UBIFS_FS_DEBUG not set,
gcc-4.5.2 generates a slew of "warning: statement with no effect"
on references to non-void functions defined as 0.
To avoid these warnings, replace #defines with dummy inline functions.

Artem: massage the patch a bit, also remove the duplicate
       'dbg_check_lprops()' prototype.

Signed-off-by: Maksim Rayskiy <maksim.rayskiy@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-13 11:59:09 +03:00
Mike Frysinger
132543074a USB: musb: blackfin: work around anomaly 05000450
DMA mode 1 data corruption anomaly on Blackfin systems.  This issue is
specific to the Blackfin silicon as the bug appears to be related to the
connection of the musb ip to the bus/dma fabric.

Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105)
DMA mode 1 allows large size transfers to generate a single interrupt
at the end of the entire transfer.  The transfer is split up in packets
of length specified in the Maximum Packet Size field for that endpoint.
If the transfer size is not an integer multiple of the Maximum Packet
Size, a short packet will be present at the end of the transfer.

Under certain conditions this packet may be corrupted in the USB FIFO.

Workaround:
Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA
mode 0 to transfer the short packet.

As an example if your transfer size is 33168 bytes and Maximum Packet
Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and
the remainder (33168 mod 512) in DMA mode 0.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:28 +03:00
Hema HK
4f9edd2d7e usb: musb: Fix the crash issue during reboot
Below crash observed with commit 7acc6197b7
(usb: musb: Idle path retention and offmode support for OMAP3)
during board reboot.

The musb clock was disabled when musb_shutdown() was called by
platform_drv_shutdown in which there are register accesses.
call pm_runtime_get_sync() and pm_runtime_put_sync() in the
musb_shutdown function.

/ # [  172.368774] Unhandled fault: imprecise external abort (0x1406) at 0x400f0000
[  172.376190] Internal error: : 1406 [#1] SMP
[  172.380554] last sysfs file: /sys/devices/platform/omap/omap_i2c.4/i2c-4/i2c-dev/i2c-4/dev
[  172.389221] Modules linked in:
[  172.392456] CPU: 0    Tainted: G        W    (2.6.38-06671-geddecbb #33)
[  172.399475] PC is at do_raw_spin_unlock+0x50/0xc0
[  172.404418] LR is at _raw_spin_unlock_irqrestore+0x24/0x44
[  172.410186] pc : [<c069bfdc>]    lr : [<c085a7f8>]    psr: 60000093
[  172.410186] sp : ee993e40  ip : c0d00240  fp : bea9cf14
[  172.422241] r10: 00000000  r9 : ee992000  r8 : c04b2fa8
[  172.427703] r7 : 00000000  r6 : c0fa46c0  r5 : ef966124  r4 : ef966124
[  172.434539] r3 : ef92cbc0  r2 : ef92cbc0  r1 : 00000000  r0 : ef966124
[  172.441406] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  172.448974] Control: 10c5387d  Table: ae8d804a  DAC: 00000015
[  172.454986] Process init (pid: 1094, stack limit = 0xee9922f8)
[  172.461120] Stack: (0xee993e40 to 0xee994000)
[  172.465667] 3e40: a0000013 c085a7f8 ef966124 a0000013 c0fa46c0 c0761ab4 c0761a70 ef95c008
[  172.474273] 3e60: ef95c014 c06e2fd0 c06e2fbc c06dea90 00000000 01234567 28121969 c04fccb4
[  172.482849] 3e80: 00000000 c04fcd04 c0a302bc c04fce44 c0a02600 00000001 00000000 c085cd04
[  172.491424] 3ea0: 00000000 00000002 c09ea000 c085afc0 ee993f24 00000000 00040001 00000445
[  172.499999] 3ec0: a8eb9d34 00000027 00000000 00000000 00000000 c0a56a4c 00000000 00000000
[  172.508575] 3ee0: 00000002 60000093 00000000 c0519aac 00000002 00000080 00000000 c0550420
[  172.517150] 3f00: 00000000 00000002 ee970000 c0a56a3c c0a56a20 00000002 c0a56a3c 00000000
[  172.525726] 3f20: c0a56a3c 0000000a c1580e00 c0a56a20 00000002 c0a56a3c c1580e00 c0a56a20
[  172.534301] 3f40: ef92cbc0 c05173a0 00000001 ef92cbc0 c0576190 c04e3174 20000013 c0517324
[  172.542877] 3f60: ef815c00 ee90b720 c04e3174 c0576190 00000001 ef92cbc0 c04b2f00 ffffffff
[  172.551483] 3f80: 00000058 c0517324 00000000 00000000 ffffffff 00000000 00000000 ffffffff
[  172.560058] 3fa0: 00000058 c04b2de0 00000000 00000000 fee1dead 28121969 01234567 00000000
[  172.568634] 3fc0: 00000000 00000000 ffffffff 00000058 00000000 00000001 400aa000 bea9cf14
[  172.577209] 3fe0: 000ea148 bea9c958 000aa750 40225728 60000010 fee1dead 00000000 00000000
[  172.585784] [<c069bfdc>] (do_raw_spin_unlock+0x50/0xc0) from [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44)
[  172.596588] [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) from [<c0761ab4>] (musb_shutdown+0x44/0x88)
[  172.606933] [<c0761ab4>] (musb_shutdown+0x44/0x88) from [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18)
[  172.616699] [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) from [<c06dea90>] (device_shutdown+0x74/0xb4)
[  172.626647] [<c06dea90>] (device_shutdown+0x74/0xb4) from [<c04fccb4>] (kernel_restart_prepare+0x24/0x38)
[  172.636688] [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) from [<c04fcd04>] (kernel_restart+0xc/0x48)
[  172.646545] [<c04fcd04>] (kernel_restart+0xc/0x48) from [<c04fce44>] (sys_reboot+0xfc/0x1d8)
[  172.655426] [<c04fce44>] (sys_reboot+0xfc/0x1d8) from [<c04b2de0>] (ret_fast_syscall+0x0/0x3c)
[  172.664459] Code: e3c3303f e594200c e593300c e1520003 (0a000002)
[  172.670867] ------------[ cut here ]------------

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:28 +03:00
Felipe Balbi
3d5ad13eac usb: musb: gadget: check the correct list_head
We are now using our own list_head, so we should
be checking against that, not the gadget driver's
list_head.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:26 +03:00
Felipe Balbi
7a180e70cf usb: musb: temporarily make it bool
Due to the recent changes to musb's glue layers,
we can't compile musb-hdrc as a module - compilation
will break due to undefined symbol musb_debug. In
order to fix that, we need a big re-work of the
debug support on the MUSB driver.

Because that would mean a lot of new code coming
into the -rc series, it's best to defer that to
next merge window and for now just disable module
support for MUSB.

Once we get the refactor of the debugging support
done, we can simply revert this patch and things
will go back to normal again.

Cc: stable@kernel.org # v2.6.38
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:25 +03:00
Dan Carpenter
2e10f5e70f USB: musb: dereferencing an iomem pointer
"tx_ram" points to io memory.  We can't dereference it directly.  Sparse
complains about this: "drivers/usb/musb/cppi_dma.c:1205:25: warning:
dereference of noderef expression"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:24 +03:00
Dan Carpenter
2fbcf3fa43 USB: musb: silence printk format warning
Gcc gives the following warnings:

drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_tx_segment’:
drivers/usb/musb/cppi_dma.c:600: warning: format ‘%x’ expects type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_rx_segment’:
drivers/usb/musb/cppi_dma.c:822: warning: format ‘%x’ expects type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c: In function ‘cppi_rx_scan’:
drivers/usb/musb/cppi_dma.c:1042: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c:1114: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’

dma_addr_t is sometimes 32 bit and sometimes 64.  We normally cast them
to unsigned long long for printk().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:23 +03:00
Dan Carpenter
aca7f35321 USB: musb: using 0 instead of NULL
Sparse complains (and rightly so):
drivers/usb/musb/cppi_dma.c:1458:33:
	warning: Using plain integer as NULL pointer

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:21 +03:00
Dan Carpenter
ec63bf6c06 USB: musb: add missing unlock in cppi_interrupt()
We should unlock before returning here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:58 +03:00
Mian Yousaf Kaukab
8726606424 usb: musb: ux500: copy dma mask from platform device to musb device
musb code checks dma mask before calling dma hooks.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:57 +03:00
Mian Yousaf Kaukab
100d4a9d20 usb: musb: clear AUTOSET while clearing DMAENAB
On the completion of tx dma, dma is disabled by clearing MUSB_TXCSR_DMAENAB in
TXCSR. If MUSB_TXCSR_AUTOSET was set in txstate() it will remain set although
it is not needed in PIO mode. Clear it as soon as it is not needed.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:55 +03:00
Artem Bityutskiy
78530bf7f2 UBIFS: fix oops when R/O file-system is fsync'ed
This patch fixes severe UBIFS bug: UBIFS oopses when we 'fsync()' an
file on R/O-mounter file-system. We (the UBIFS authors) incorrectly
thought that VFS would not propagate 'fsync()' down to the file-system
if it is read-only, but this is not the case.

It is easy to exploit this bug using the following simple perl script:

use strict;
use File::Sync qw(fsync sync);

die "File path is not specified" if not defined $ARGV[0];
my $path = $ARGV[0];

open FILE, "<", "$path" or die "Cannot open $path: $!";
fsync(\*FILE) or die "cannot fsync $path: $!";
close FILE or die "Cannot close $path: $!";

Thanks to Reuben Dowle <Reuben.Dowle@navico.com> for reporting about this
issue.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Cc: stable@kernel.org
2011-04-13 10:43:32 +03:00
Jeff Brown
9fb0f14e31 Input: evdev - indicate buffer overrun with SYN_DROPPED
Add a new EV_SYN code, SYN_DROPPED, to inform the client when input
events have been dropped from the evdev input buffer due to a
buffer overrun.  The client should use this event as a hint to
reset its state or ignore all following events until the next
packet begins.

Signed-off-by: Jeff Brown <jeffbrown@android.com>
[dtor@mail.ru: Implement Henrik's suggestion and drop old events in
 case of overflow.]
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:35:24 -07:00
Chase Douglas
b1e064b81e Input: document event types and codes and their intended use
This commit adds the file Documentation/input/event-codes.txt.

Acked-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:35:18 -07:00
Jarod Wilson
ba6a078b77 Input: add KEY_IMAGES specifically for AL Image Browser
Many media center remotes have buttons intended for jumping straight to
one type of media browser or another -- commonly, images/photos/pictures,
audio/music, television, and movies. At present, remotes with an images
or photos or pictures button use any number of different keycodes which
sort of maybe fit. I've seen at least KEY_MEDIA, KEY_CAMERA,
KEY_GRAPHICSEDITOR and KEY_PRESENTATION. None of those seem quite right.
In my mind, KEY_MEDIA should be something more like a media center
application launcher (and I'd like to standardize on that for things
like the windows media center button on the mce remotes). KEY_CAMERA is
used in a lot of webcams, and typically means "take a picture now".
KEY_GRAPHICSEDITOR implies an editor, not a browser. KEY_PRESENTATION
might be the closest fit here, if you think "photo slide show", but it
may well be more intended for "run application in full-screen
presentation mode" or to launch something like magicpoint, I dunno.
And thus, I'd like to have a KEY_IMAGES, which matches the HID Usage AL
Image Browser, the meaning of which I think is crystal-clear. I believe
AL Audio Browser is already covered by KEY_AUDIO, and AL Movie Browser
by KEY_VIDEO, so I'm also adding appropriate comments next to those
keys.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:35:09 -07:00
Miao Xie
329c5056be Btrfs: Check validity before setting an acl
Call posix_acl_valid() to check if an acl is valid or not.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-13 14:25:35 +08:00
Miao Xie
3153495d8e Btrfs: Fix incorrect inode nlink in btrfs_link()
Link count of the inode is not decreased if btrfs_set_inode_index()
fails.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Singed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-13 14:25:32 +08:00
Li Zefan
b9e03af0bc Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir()
btrfs_next_leaf() can return -errno, and we should propagate
it to userspace.

This also simplifies how we walk the btree path.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-13 14:25:31 +08:00
Li Zefan
2e6a00356a Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr()
btrfs_next_leaf() can return -errno, and we should propagate
it to userspace.

This also simplifies how we walk the btree path.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-13 14:25:28 +08:00
Wei Yongjun
9494c7c577 sctp: fix oops while removed transport still using as retran path
Since we can not update retran path to unconfirmed transports,
when we remove a peer, the retran path may not be update if the
other transports are all unconfirmed, and we will still using
the removed transport as the retran path. This may cause panic
if retrasnmit happen.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12 19:33:51 -07:00
Vlad Yasevich
25f7bf7d0d sctp: fix oops when updating retransmit path with DEBUG on
commit fbdf501c93
  sctp: Do no select unconfirmed transports for retransmissions

Introduced the initial falt.

commit d598b166ce
  sctp: Make sure we always return valid retransmit path

Solved the problem, but forgot to change the DEBUG statement.
Thus it was still possible to dereference a NULL pointer.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12 19:33:50 -07:00
Ben Hutchings
31d8b9e099 net: Disable NETIF_F_TSO_ECN when TSO is disabled
NETIF_F_TSO_ECN has no effect when TSO is disabled; this just means
that feature state will be accurately reported to user-space.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12 19:29:45 -07:00
Ben Hutchings
ea2d36883c net: Disable all TSO features when SG is disabled
The feature flags NETIF_F_TSO and NETIF_F_TSO6 independently enable
TSO for IPv4 and IPv6 respectively.  However, the test in
netdev_fix_features() and its predecessor functions was never updated
to check for NETIF_F_TSO6, possibly because it was originally proposed
that TSO for IPv6 would be dependent on both feature flags.

Now that these feature flags can be changed independently from
user-space and we depend on netdev_fix_features() to fix invalid
feature combinations, it's important to disable them both if
scatter-gather is disabled.  Also disable NETIF_F_TSO_ECN so
user-space sees all TSO features as disabled.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12 19:29:45 -07:00
Geert Uytterhoeven
60d48c1e67 m68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-12 19:02:03 -07:00
Eric Miao
7db6a7fa09 ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup
event.  It is misinterpreted as a gpio irq not a PWER bitmask. Fixed
this by converting the incorrect IRQ_TO_IRQ() to a correct version of
irq_to_gpio().

Reported-by: Nick Bane <nickbane1@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-13 09:30:40 +08:00
Chris Mason
109b36a2bb Btrfs: make uncache_state unconditional
The extent_io code can take cached pointers into the extent state trees,
and these can make lookups much faster in common operations.  The
caching only happens when specific bits are set that prevent merging
and splitting of the extent state.

A help function was added to uncache the state, and it was testing
the same set of conditionals.  This can leak in very strange corner
cases where the lock bit goes away unexpectedly.

The uncaching should be unconditional.  Once we have a ref on the
extent we should always give it up.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-12 20:51:26 -04:00
Linus Torvalds
aaa119a3d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  fix XEN_SAVE_RESTORE Kconfig dependencies
  PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
2011-04-12 17:18:05 -07:00
David S. Miller
c0212fb146 Merge branch 'sfc-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6 2011-04-12 17:10:52 -07:00
Thomas Gleixner
92f73a62a1 Merge branch 'fortglx/39/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent 2011-04-13 01:54:09 +02:00
Dave Airlie
2582b6efce Revert "i915: restore only the mode of this driver on lastclose"
This reverts commit 0a0883c843.

this was in my tree by accident, I meant to rebase it out and
didn't realise in time.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:20:24 +10:00
Dave Airlie
d87dfdbfc9 Revert "ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set."
This reverts commit 69a07f0b11.

We've tracked a number of problems back to this, and Thomas
thinks we should redesign this for .40/41 anyways so I'm
happy to revert it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:15:09 +10:00
Konstantin Khlebnikov
cbf15bdbbd i915: select VIDEO_OUTPUT_CONTROL for ACPI_VIDEO
fix Kconfig warning:

(DRM_I915 && STUB_POULSBO) selects ACPI_VIDEO which has unmet direct dependencies
(ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:10:25 +10:00
Alex Deucher
2feea49ae3 drm/radeon/kms: properly program vddci on evergreen+
Change vddci as well as vddc when changing power modes
on evergreen/ni.  Also, properly set vddci on boot up
for ni cards.  The vbios only sets the limited clocks
and voltages on boot until the mc ucode is loaded.  This
should fix stability problems on some btc cards.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:44 +10:00
Alex Deucher
8a83ec5ee8 drm/radeon/kms: add voltage type to atom set voltage function
This is needed for setting voltages other than vddc.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:42 +10:00
Alex Deucher
b4df8be104 drm/radeon/kms: fix pcie_p callbacks on btc and cayman
btc and cayman asics use the same callback for
pcie port registers.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:30 +10:00
Alex Deucher
71e16bfbd2 drm/radeon/kms: fix suspend on rv530 asics
Apparently only rv515 asics need the workaround
added in f24d86f1a4
(drm/radeon/kms: fix resume regression for some r5xx laptops).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=34709

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:27 +10:00
Alex Deucher
92656d707e drm/radeon/kms: clean up gart dummy page handling
As per Konrad's original patch, the dummy page used
by the gart code and allocated in radeon_gart_init()
was not freed properly in radeon_gart_fini().

At the same time r6xx and newer allocated and freed the
dummy page on their own.  So to do Konrad's patch one
better, just remove the allocation and freeing of the
dummy page in the r6xx, 7xx, evergreen, and ni code and
allocate and free in the gart_init/fini() functions for
all asics.

Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:22 +10:00