Pass the new "priv" cookie to NSMPROC_MON's XDR encoder, instead of
creating the "priv" argument in the encoder at call time.
This patch should not cause a behavioral change: the contents of the
cookie remain the same for the time being.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Introduce a new data type, used by both the in-kernel NLM and NSM
implementations, that is used to manage the opaque "priv" argument
for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls.
Construct the "priv" cookie when the nsm_handle is created.
The nsm_init_private() function may look a little strange, but it is
roughly equivalent to how the XDR encoder formed the "priv" argument.
It's going to go away soon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_release() function should never be called with a NULL handle
point. If it is, that's a bug.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_find() function should never be called with a NULL IP address
pointer. If it is, that's a bug.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Introduce some dprintk() calls in fs/lockd/mon.c that are enabled by
the NLMDBG_MONITOR flag. These report when we find, create, and
release nsm_handles.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_find() function sets up fresh nsm_handle entries. This is
where we will store the "priv" cookie used to lookup nsm_handles during
reboot recovery. The cookie will be constructed when nsm_find()
creates a new nsm_handle.
As much as possible, I would like to keep everything that handles a
"priv" cookie in fs/lockd/mon.c so that all the smarts are in one
source file. That organization should make it pretty simple to see how
all this works.
To me, it makes more sense than the current arrangement to keep
nsm_find() with nsm_monitor() and nsm_unmonitor().
So, start reorganizing by moving nsm_find() into fs/lockd/mon.c. The
nsm_release() function comes along too, since it shares the nsm_lock
global variable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Introduce xdr_stream-based XDR encoder and decoder functions, which are
more careful about preventing RPC buffer overflows.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Move the RPC program and procedure numbers for NSM into the
one source file that needs them: fs/lockd/mon.c.
And, as with NLM, NFS, and rpcbind calls, use NSMPROC_FOO instead of
SM_FOO for NSM procedure numbers.
Finally, make a couple of comments more precise: what is referred to
here as SM_NOTIFY is really the NLM (lockd) NLMPROC_SM_NOTIFY downcall,
not NSMPROC_NOTIFY.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: NSM's XDR data structures are used only in fs/lockd/mon.c,
so move them there.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make sure any error returned by rpc.statd during an SM_UNMON call is
reported rather than ignored completely. There isn't much to do with
such an error, but we should log it in any case.
Similar to a recent change to nsm_monitor().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up.
Make the nlm_host argument "const," and move the public declaration to
lockd.h. Add a documenting comment.
Bruce observed that nsm_unmonitor()'s only caller doesn't care about
its return code, so make nsm_unmonitor() return void.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_handle's reference count is bumped in nlm_lookup_host(). It
should be decremented in nlm_destroy_host() to make it easier to see
the balance of these two operations.
Move the nsm_release() call to fs/lockd/host.c.
The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared.
The nlm_destroy_host() function is never called for the same nlm_host
twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is
called.
All references to the nlm_host are gone before it is freed. We can
skip making h_nsmhandle NULL just before the nlm_host is deallocated.
It's also likely we can remove the h_nsmhandle NULL check in
nlmsvc_is_client() as well, but we can do that later when rearchitect-
ing the nlm_host cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up.
Make the nlm_host argument "const," and move the public declaration to
lockd.h with other NSM public function (nsm_release, eg) and global
variable declarations.
Add a documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_monitor() function reports an error and does not set sm_monitored
if the SM_MON upcall reply has a non-zero result code, but nsm_monitor()
does not return an error to its caller in this case.
Since sm_monitored is not set, the upcall is retried when the next NLM
request invokes nsm_monitor(). However, that may not come for a while.
In the meantime, at least one NLM request will potentially proceed
without the peer being monitored properly.
Have nsm_monitor() return an error if the result code is non-zero.
This will cause all NLM requests to fail immediately if the upcall
completed successfully but rpc.statd returned an error.
This may be inconvenient in some cases (for example if rpc.statd
cannot complete a proper DNS reverse lookup of the hostname), but will
make the reboot monitoring service more robust by forcing such issues
to be corrected by an admin.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Remove the BUG_ON() invocation in nsm_monitor(). It's not
likely that nsm_monitor() is ever called with a NULL host pointer, and
the code will die anyway if host is NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Use the sm_name field for reporting the hostname in nsm_monitor()
and nsm_unmonitor(), just as the other functions in fs/lockd/mon.c do.
The h_name field is just a copy of the sm_name pointer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted. The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.
When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.
To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string. Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.
This patch also addresses a subtle bug.
An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.
If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same. This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames
To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function. A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.
NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored. This patch does not attempt to address those
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: make the printk(KERN_DEBUG) in nsm_mon_unmon() a dprintk,
and add another dprintk to note if creating an RPC client for the
upcall failed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Use a C99 structure initializer instead of open-coding the
initialization of nsm_args.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To store larger addresses in the nsm_handle structure, make sm_addr a
sockaddr_storage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: refactor the encoding of the opaque 16-byte private argument in
xdr_encode_mon(). This will be updated later to support IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Switch to using the new mon_id encoder function.
Now that we've refactored the encoding of SM_MON requests, we've
discovered that the pre-computed buffer length maximums are
incorrect!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: document the argument type that xdr_encode_common() is
marshalling by introducing a new function. The new function will replace
xdr_encode_common() in just a sec.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: introduce a new XDR encoder specifically for the my_id
argument of SM_MON requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: introduce a new XDR encoder specifically for the mon_name
argument of SM_MON requests. This will be updated later to support IPv6
addresses in addition to IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce a special helper function to check the length of NSM strings
before they are placed on the wire.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of an { address family, raw IP protocol number }-tuple, use the
newly-defined RPC identifier when creating clients in the upper layers.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace it with explicit calls to rpc_shutdown_client() or
rpc_destroy_client() (for the case of asynchronous calls).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPC buffer size estimation logic in net/sunrpc/clnt.c always
significantly overestimates the requirements for the buffer size.
A little instrumentation demonstrated that in fact rpc_malloc was never
allocating the buffer from the mempool, but almost always called kmalloc.
To compute the size of the RPC buffer more precisely, split p_bufsiz into
two fields; one for the argument size, and one for the result size.
Then, compute the sum of the exact call and reply header sizes, and split
the RPC buffer precisely between the two. That should keep almost all RPC
buffers within the 2KiB buffer mempool limit.
And, we can finally be rid of RPC_SLACK_SPACE!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Every NLM call includes the client's NSM state. Currently, the Linux client
always reports 0 - which seems not to cause any problems, but is not what the
protocol says.
This patch exposes the kernel's internal variable to user space via a sysctl,
which can be set at system boot time by statd.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the nsm_use_hostnames sysctl and module param. If set, lockd
will use the client's name (as given in the NLM arguments) to find the NSM
handle. This makes recovery work when the NFS peer is multi-homed, and the
reboot notification arrives from a different IP than the original lock calls.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This converts the statd upcalls to use the nsm_handle
This means that we only register each host once with statd, rather than
registering each host/vers/protocol triple.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces the nsm_handle, which is shared by all nlm_host objects
referring to the same client.
With this patch applied, all nlm_hosts from the same address will share the
same nsm_handle. A future patch will add sharing by name.
Note: this patch changes h_name so that it is no longer guaranteed to be an IP
address of the host. When the host represents an NFS server, h_name will be
the name passed in the mount call. When the host represents a client, h_name
will be the name presented in the lock request received from the client. A
h_name is only used for printing informational messages, this change should
not be significant.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves all checks of the h_monitored flag into the
nsm_monitor/unmonitor functions. A subsequent patch will replace the
mechanism by which we mark a host as being monitored.
There is still one occurence of h_monitored outside of mon.c and that is in
clntlock.c where we respond to a reboot. The subsequent patch will modify
this too.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace references to system_utsname to the per-process uts namespace
where appropriate. This includes things like uname.
Changes: Per Eric Biederman's comments, use the per-process uts namespace
for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c
[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace xprt_create_proto/rpc_create_client with new rpc_create()
interface in the Network Lock Manager.
Note that the semantics of NLM transports is now "hard" instead of "soft"
to provide a better guarantee that lock requests will get to the server.
Test plan:
Repeated runs of Connectathon locking suite. Check network trace to ensure
NLM requests are working correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (103 commits)
SUNRPC,RPCSEC_GSS: spkm3--fix config dependencies
SUNRPC,RPCSEC_GSS: spkm3: import contexts using NID_cast5_cbc
LOCKD: Make nlmsvc_traverse_shares return void
LOCKD: nlmsvc_traverse_blocks return is unused
SUNRPC,RPCSEC_GSS: fix krb5 sequence numbers.
NFSv4: Dont list system.nfs4_acl for filesystems that don't support it.
SUNRPC,RPCSEC_GSS: remove unnecessary kmalloc of a checksum
SUNRPC: Ensure rpc_call_async() always calls tk_ops->rpc_release()
SUNRPC: Fix memory barriers for req->rq_received
NFS: Fix a race in nfs_sync_inode()
NFS: Clean up nfs_flush_list()
NFS: Fix a race with PG_private and nfs_release_page()
NFSv4: Ensure the callback daemon flushes signals
SUNRPC: Fix a 'Busy inodes' error in rpc_pipefs
NFS, NLM: Allow blocking locks to respect signals
NFS: Make nfs_fhget() return appropriate error values
NFSv4: Fix an oops in nfs4_fill_super
lockd: blocks should hold a reference to the nlm_file
NFSv4: SETCLIENTID_CONFIRM should handle NFS4ERR_DELAY/NFS4ERR_RESOURCE
NFSv4: Send the delegation stateid for SETATTR calls
...
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE. Some trailing whitespaces are also deleted.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clean-up: replace rpc_call() helper with direct call to rpc_call_sync.
This makes NFSv2 and NFSv3 synchronous calls more computationally
efficient, and reduces stack consumption in functions that used to
invoke rpc_call more than once.
Test plan:
Compile kernel with CONFIG_NFS enabled. Connectathon on NFS version 2,
version 3, and version 4 mount points.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add fields to the rpc_procinfo struct that allow the display of a
human-readable name for each procedure in the rpc_iostats output.
Also fix it so that the NFSv4 stats are broken up correctly by
sub-procedure number. NFSv4 uses only two real RPC procedures:
NULL, and COMPOUND.
Test plan:
Mount with NFSv2, NFSv3, and NFSv4, and do "cat /proc/self/mountstats".
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
client, sets cl_chatty. There's no reason why NLM shouldn't set it, so
just get rid of cl_chatty and always be verbose.
Test-plan:
Compile with CONFIG_NFS enabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we don't create an RPC client without checking that the server
does indeed support the RPC program + version that we are trying to set up.
This enables us to immediately return an error to "mount" if it turns out
that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
![](/avatar/511417582bfa18e9a88da2ada8339d64?size=56 "\\"Talpey, Thomas\"){kind=small}
