The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we
store these as an array of two such registers on the vgic vcpu struct.
However, we access them as a single 64-bit value or as a bitmap pointer
in the generic vgic code, which breaks BE support.
Instead, store them as u64 values on the vgic structure and do the
word-swapping in the assembly code, which already handles the byte order
for BE systems.
Tested-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
After grabbing the mailbox lock and detecting an error, the lock must be
released before the error code can be returned.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The atmel serial driver uses dmaengine APIs but never included the dmaengine
header as it was getting inculded thru one of driver headers.
commit 3d588f83e4 - "dmaengine: dw: split
dma-dw.h to platform and private parts" broke this as it moved headers
around. Fix this by doing the right thing to include the dmaengine header
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 08f738be88 (serial: at91: add tx dma support)
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Set the flag to fetch the host state before kicking off the service task
that reads the host state when bringing the interface back up.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami).
This first version of the DTS supports just a serial console.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add SATA PHY and SATA AHCI controller nodes to device tree to enable
generic ahci support on the IPQ8064/AP148 board.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I2C drivers for hix5hd2 soc series, including following chipset
Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.
Signed-off-by: Wei Yan <sledge.yanwei@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[wsa: folded dt docs into this patch]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
User visible:
* Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song)
* Fix for double free in 'perf stat' when using some specific invalid
command line combo (Yasser Shalabi)
Infrastructure:
* Add option to copy events when queuing for sorting across cpu buffers
and enable it for 'perf kvm stat live', to avoid having events left
in the queue pointing to the ring buffer be rewritten in high volume
sessions. (Alexander Yarygin, improving work done by David Ahern):
* Document sysfs events/ interfaces (Cody P Schafer)
* Add support to new style format of kernel PMU event. (Kan Liang)
* Fix typos in perf/Documentation (Masanari Iida)
* Improve callchains when using libunwind (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lines starting with '#' will be ignored.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+bVc
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
* Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song)
* Fix for double free in 'perf stat' when using some specific invalid
command line combo (Yasser Shalabi)
Infrastructure changes:
* Add option to copy events when queuing for sorting across cpu buffers
and enable it for 'perf kvm stat live', to avoid having events left
in the queue pointing to the ring buffer be rewritten in high volume
sessions. (Alexander Yarygin, improving work done by David Ahern):
* Document sysfs events/ interfaces (Cody P Schafer)
* Add support to new style format of kernel PMU event. (Kan Liang)
* Fix typos in perf/Documentation (Masanari Iida)
* Improve callchains when using libunwind (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pskb_may_pull should be used to check if skb->data has enough space,
skb->len can not ensure that.
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when netif_rx() is done, the netif_rx handled skb maybe be freed,
and should not be used.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All functions used struct vport *vport except
ovs_vport_find_upcall_portid.
This fixes 1 kerneldoc warning
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/sock/gs
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0b0b0893d4 "of/pci: Fix the conversion of IO ranges into IO
resources" changed the behaviour of of_pci_range_to_resource().
Previously it simply populated the resource based on the arguments. Now
it calls pci_register_io_range() and pci_address_to_pio(). These both
have two implementations depending on whether PCI_IOBASE is defined,
which it is not for powerpc.
Further complicating matters, both routines are weak, and powerpc
implements it's own version of one - pci_address_to_pio(). However
powerpc's implementation depends on other initialisations which are done
later in boot.
The end result is incorrectly initialised IO space. Often we can get
away with that, because we don't make much use of IO space. However
virtio requires it, so we see eg:
pci_bus 0000:00: root bus resource [io 0xffff] (bus address [0xffffffffffffffff-0xffffffffffffffff])
PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap
virtio-pci 0000:00:01.0: can't enable device: BAR 0 [io size 0x0020] not assigned
The simplest fix for now is to just stop using of_pci_range_to_resource(),
and open-code the original implementation, that's all we want it to do.
Fixes: 0b0b0893d4 ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For each Rx frame the eTSEC writes its FCS (Frame Check Sequence)
to the Rx buffer.
The eTSEC h/w manual states in the "Receive Buffer Descriptor Field
Descriptions" table:
"Data length is the number of octets written by the eTSEC into this BD's
data buffer if L is cleared (the value is equal to MRBLR), or, if L is
set, the length of the frame including *CRC*, FCB (if RCTRL[PRSDEP > 00),
preamble (if MACCFG2[PreAmRxEn]=1), time stamp (if RCTRL[TS] = 1) and
any padding (RCTRL[PAL])."
Though the FCS bytes are removed by the driver before passing the skb
to the net stack, the Rx buffer size computation does not currently
take into account the FCS bytes (4 bytes).
Because the Rx buffer size is multiple of 512 bytes, leaving out the
FCS is not a problem for the default MTU of 1500, as the Rx buffer size
is 1536 in this case. However, for custom MTUs, where the difference
between the MTU size and the Rx buffer size is less, this can be a
problem as the computed Rx buffer size won't be enough to accomodate
the FCS for a received frame that is big enough (close to MTU size).
In such case the received frame is considered to be incomplete (L flag
not set in the RxBD status) and silently dropped.
Note that the driver does not currently support S/G on Rx, so it has to
compute its Rx buffer size based on the MTU of the device.
Reported-by: Kristian Otnes <kotnes@cisco.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 0b725a2ca6
net: Remove ndo_xmit_flush netdev operation, use signalling instead.
added code that looks at skb->xmit_more after the skb has
been put in TX VQ. Since some paths process the ring and free the skb
immediately, this can cause use after free.
Fix by storing xmit_more in a local variable.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
iMX6SX IEEE 1588 module has one hw issue in capturing the ATVR register.
The current SW flow is:
ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK;
ts_counter_ns = ENET0->ATVR;
The ATVR value is not expected value that cause LinuxPTP stack cannot be convergent.
ENET Block Guide/ Chapter for the iMX6SX (PELE) address the issue:
After set ENET_ATCR[Capture], there need some time cycles before the counter
value is capture in the register clock domain. The wait-time-cycles is at least
6 clock cycles of the slower clock between the register clock and the 1588 clock.
So need something like:
ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK;
wait();
ts_counter_ns = ENET0->ATVR;
For iMX6SX, the 1588 ts_clk is fixed to 25Mhz, register clock is 66Mhz, so the
wait-time-cycles must be greater than 240ns (40ns * 6). The patch add 1us delay
before cpu read ATVR register.
Changes V2:
Modify the commit/comments log to describe the issue clearly.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process of analyzing events caused by 2 functions: mmap_read() and
finished_round().
During mmap_read(), perf receives events from shared memory, queues
their pointers for further processing in finished_round() and notifies
the kernel that the events have been processed.
By the time when finished_round() is invoked, queued events can be
overwritten by the kernel, so the finished_round() occurs on potentially
corrupted memory.
Since there is no place where the event can be safely consumed, let's
copy events when queueing.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412347212-28237-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing events the session code has an ordered samples queue
which is used to time-sort events coming in across multiple mmaps. At a
later point in time samples on the queue are flushed up to some
timestamp at which point the event is actually processed.
When analyzing events live (ie., record/analysis path in the same
command) there is a race that leads to corrupted events and parse errors
which cause perf to terminate. The problem is that when the event is
placed in the ordered samples queue it is only a reference to the event
which is really sitting in the mmap buffer. Even though the event is
queued for later processing the mmap tail pointer is updated which
indicates to the kernel that the event has been processed. The race is
flushing the event from the queue before it gets overwritten by some
other event. For commands trying to process events live (versus just
writing to a file) and processing a high rate of events this leads to
parse failures and perf terminates.
Examples hitting this problem are 'perf kvm stat live', especially with
nested VMs which generate 100,000+ traces per second, and a command
processing scheduling events with a high rate of context switching --
e.g., running 'perf bench sched pipe'.
This patch offers live commands an option to copy the event when it is
placed in the ordered samples queue.
Based on a patch from David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412347212-28237-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix spelling typos found in tool/perf/Documentation.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1410275930-17207-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mechanical changes only for accounting access to thread->priv
properly in the source level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mechanical changes only for accounting access to thread->priv
properly in the source level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The unw_addr_space_t in libunwind represents an address space to be used
for stack unwinding. It doesn't need to be create/destory everytime to
unwind callchain (as in get_entries) and can have a same lifetime as
thread (unless exec called).
So move the address space construction/destruction logic to the thread
lifetime handling functions. This is a preparation to enable caching in
the unwind library.
Note that it saves unw_addr_space_t object using thread__set_priv(). It
seems currently only used by perf trace and perf kvm stat commands which
don't use callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-3-git-send-email-namhyung@kernel.org
[ Fixup unwind-libunwind.c missing CALLCHAIN_DWARF definition, added
missing __maybe_unused on unused parameters in stubs at util/unwind.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally the callchain_param.record_mode is used only for record path.
But as it might need to prepare something for dwarf unwinding, setup
this info for perf report too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix for double free bug in tools/perf due to dangling thread_map pointer
in perf_evlist struct.
Code path excercised when perf stat -C switch is used but not set and is
followed by another switch.
Example:
perf stat -C -e.
Signed-off-by: Yasser Shalabi <yassershalabi@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412437077-13109-1-git-send-email-yassershalabi@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test case in automated tests suite. It checks not only the two types
of pmu event stytle formats "pmu_event_name" and "cpu/pmu_event_name/",
but also the different formats mixtures which are more likely to trigger
parse issue.
The patch set including this one has been tested by the perf automated
test:
./perf test parse -v"
On haswell, ivybridge and Romley platform.
The patch set also has been tested on haswell by the following script.
Note: please make sure that your test system support TSX and
L1-dcache-loads events. Otherwise, you may want to change the events to
other pmu events.
[lk@localhost ~]$ cat perf_style_test.sh
# hardware events + kernel pmu event with different style
perf stat -x, -e cycles,mem-stores,tx-start sleep 2
perf stat -x, -e cpu-cycles,cycles-ct,cycles-t sleep 2
perf stat -x, -e cycles,cpu/cycles-ct/,cpu/cycles-t/ sleep 2
perf stat -x, -e instructions,cpu/tx-start/ sleep 2
perf stat -x, -e '{cycles,tx-start}' sleep 2
perf stat -x, -e '{cycles,cpu/tx-start/}' sleep 2
# HW Cache event + kernel pmu event with different style
perf stat -x, -e L1-dcache-loads,cpu/mem-stores/,tx-start sleep 2
perf stat -x, -e L1-dcache-loads,mem-stores,cpu/tx-start/ sleep 2
perf stat -x, -e '{L1-dcache-loads,mem-stores}' sleep 2
perf stat -x, -e '{L1-dcache-loads,cpu/tx-start/}' sleep 2
# Raw event + kernel pmu event with different style:
perf stat -x, -e cpu/event=0xc0,umask=0x00/,mem-loads,cpu/mem-stores/ sleep 2
perf stat -x, -e cpu/event=0xc0,umask=0x00/,tx-start,cpu/el-start/ sleep 2
perf stat -x, -e '{cpu/event=0xc0,umask=0x00/,tx-start}' sleep 2
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new rules for kernel PMU event.
Currently, the patch only want to handle the PMU event name as "a-b" and
"a".
event_pmu:
PE_KERNEL_PMU_EVENT sep_dc
|
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
PE_KERNEL_PMU_EVENT token is for
cycles-ct/cycles-t/mem-loads/mem-stores.
The prefix cycles is mixed up with cpu-cycles. loads and stores are
mixed up with cache event So they have to be hardcode in lex.
PE_PMU_EVENT_PRE and PE_PMU_EVENT_SUF tokens are for other PMU events.
The lex looks generic identifier up in the table and return the matched
token. If there is no match, generic PE_NAME token will be return.
Using the rules, kernel PMU event could use new style format without //
so you can use:
perf record -e mem-loads ...
instead of:
perf record -e cpu/mem-loads/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two types of event formats for PMU events. E.g. el-abort OR
cpu/el-abort/. However, the lexer mistakenly recognizes the simple style
format as two events.
The parse_events_pmu_check function uses bsearch to search the name in
known pmu event list. It can tell the lexer that the name is a PE_NAME
or a PMU event name prefix or a PMU event name suffix. All these
information will be used for accurately parsing kernel PMU events.
The pmu events list will be read from sysfs at runtime.
Note: Currently, the patch only want to handle the PMU event name as
"a-b" and "a". The only exception, "stalled-cycles-frontend" and
"stalled-cycles-fronted", are already hardcoded in lexer.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 50e200f079 ("perf tools: Default to cpu// for
events v5")
The fixup cannot handle the case that
new style format(which without //) mixed with
other different formats.
For example,
group events with new style format: {mem-stores,mem-loads}
some hardware event + new style event: cycles,mem-loads
Cache event + new style event: LLC-loads,mem-loads
Raw event + new style event:
cpu/event=0xc8,umask=0x08/,mem-loads
old style event and new stytle mixture: mem-stores,cpu/mem-loads/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Listing specific events doesn't actually help us at all here because:
- these events actually vary between different ppc processors, they
aren't garunteed to be present.
- the documentation of the (generic) file contents is now superceded by the
docs for arbitrary event file contents.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1412143402-26061-5-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation for the <event>, <event>.scale, and <event>.unit
files in sysfs.
<event>.scale and <event>.unit were undocumented.
<event> was previously documented only for specific powerpc pmu events.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1412143402-26061-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When 'perf top' is run, one can't easily find a difference
between -z option and normal output.
So I added a visual cue to know whether it is the zeroing or not.
Output is as below.
Before:
$ perf top
Samples: 61K of event 'cycles', Event count (approx.): 3908136933
Overhead Shared Object Symbol
1.42% firefox [.] 0x0000000000011e76
1.32% libpthread-2.17.so [.] pthread_mutex_lock
If you press key 'z' or run with zero option like '$ perf top --zero', it is as below.
After:
Samples: 61K of event 'cycles', Event count (approx.): 3908136933 [z]
Overhead Shared Object Symbol
1.42% firefox [.] 0x0000000000011e76
1.32% libpthread-2.17.so [.] pthread_mutex_lock
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412665995-26359-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Linux kernel coding style guidelines suggest not using typedefs
for structure types. This patch gets rid of the typedef for
atiixp_ide_timing.
The following Coccinelle semantic patch detects the case:
@tn1@
type td;
@@
typedef struct { ... } td;
@script:python tf@
td << tn1.td;
tdres;
@@
coccinelle.tdres = td;
@@
type tn1.td;
identifier tf.tdres;
@@
-typedef
struct
+ tdres
{ ... }
-td
;
@@
type tn1.td;
identifier tf.tdres;
@@
-td
+ struct tdres
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the change to struct input_mt_pos some variables are now bitfields
instead of integers. Automatic conversion from integer to bitfield entry
destroys information, therefore enforce boolean interpretation instead.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1114768
Fixes: 02d04254a5 ("Input: alps - use struct input_mt_pos to track coordinates")
Signed-off-by: Andreas Bosch <linux@progandy.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Identified by kbuild test robot. csk family is always set to be AF_INET or
AF_INET6, so skb will always be initialized to some value but there is no harm
in silencing the warning anyways.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Fixes : f42bb57c61 ('cxgb4i : Fix -Wunused-function warning')
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ndo_gso_check which a device can define to indicate whether is
is capable of doing GSO on a packet. This funciton would be called from
the stack to determine whether software GSO is needed to be done. A
driver should populate this function if it advertises GSO types for
which there are combinations that it wouldn't be able to handle. For
instance a device that performs UDP tunneling might only implement
support for transparent Ethernet bridging type of inner packets
or might have limitations on lengths of inner headers.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
carma-fpga driver uses device control with custom FSLDMA_EXTERNAL_START
command. Since we wnat to deprecate the device control, move this driver to
use new fsl_dma_external_start() API
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The drivers should use dmaengine_slave_config() and dmaengine_prep_dma_sg()
API instead of accessing the device_control which will be deprecated soon
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The freescale driver uses custom device control FSLDMA_EXTERNAL_START to
put the controller in external start mode.
Since we are planning to deprecate the device control, move this to exported
API. Subsequent patches will remove the FSLDMA_EXTERNAL_START
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The drivers should use dmaengine_terminate_all() API instead of
accessing the device_control which will be deprecated soon
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The drivers should use dmaengine_terminate_all() API instead of
accessing the device_control which will be deprecated soon
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The drivers should use dmaengine_terminate_all() API instead of
accessing the device_control which will be deprecated soon
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The drivers should use dmaengine_terminate_all() API instead of
accessing the device_control which will be deprecated soon
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
