ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.
Tested-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The buf_lock cannot be held while populating the inodes, so make the backend
pass forward an allocated and filled buffer instead. This solves the following
backtrace. The effect is that "buf" is only ever used to notify the backends
that something was written to it, and shouldn't be used in the read path.
To replace the buf_lock during the read path, isolate the open/read/close
loop with a separate mutex to maintain serialized access to the backend.
Note that is is up to the pstore backend to cope if the (*write)() path is
called in the middle of the read path.
[ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847
[ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount
[ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1
[ 59.691019] Call Trace:
[ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca
[ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3
[ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4
[ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64
[ 59.691019] [<810b6903>] new_inode+0x18/0x43
[ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98
[ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f
[ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1
[ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158
[ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c
[ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0
[ 59.691019] [<8102127e>] ? should_resched+0xd/0x27
[ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21
[ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7
[ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91
[ 59.691019] [<810a7ff5>] mount_single+0x46/0x82
[ 59.691019] [<8114231a>] pstore_mount+0x15/0x17
[ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98
[ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d
[ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a
[ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d
[ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2
[ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a
[ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f
[ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99
[ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: make pstore write function return normal success/fail value
pstore: change mutex locking to spin_locks
pstore: defer inserting OOPS entries into pstore
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
llist: Add back llist_add_batch() and llist_del_first() prototypes
sched: Don't use tasklist_lock for debug prints
sched: Warn on rt throttling
sched: Unify the ->cpus_allowed mask copy
sched: Wrap scheduler p->cpus_allowed access
sched: Request for idle balance during nohz idle load balance
sched: Use resched IPI to kick off the nohz idle balance
sched: Fix idle_cpu()
llist: Remove cpu_relax() usage in cmpxchg loops
sched: Convert to struct llist
llist: Add llist_next()
irq_work: Use llist in the struct irq_work logic
llist: Return whether list is empty before adding in llist_add()
llist: Move cpu_relax() to after the cmpxchg()
llist: Remove the platform-dependent NMI checks
llist: Make some llist functions inline
sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
sched: Remove redundant test in check_preempt_tick()
sched: Add documentation for bandwidth control
sched: Return unused runtime on group dequeue
...
Currently pstore write interface employs record id as return
value, but it is not enough because it can't tell caller if
the write operation is successful. Pass the record id back via
an argument pointer and return zero for success, non-zero for
failure.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Just convert all the files that have an nmi handler to the new routines.
Most of it is straight forward conversion. A couple of places needed some
tweaking like kgdb which separates the debug notifier from the nmi handler
and mce removes a call to notify_die.
[Thanks to Ying for finding out the history behind that mce call
https://lkml.org/lkml/2010/5/27/114
And Boris responding that he would like to remove that call because of it
https://lkml.org/lkml/2011/9/21/163]
The things that get converted are the registeration/unregistration routines
and the nmi handler itself has its args changed along with code removal
to check which list it is on (most are on one NMI list except for kgdb
which has both an NMI routine and an NMI Unknown routine).
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Corey Minyard <minyard@acm.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because llist code will be used in performance critical scheduler
code path, make llist_add() and llist_del_all() inline to avoid
function calling overhead and related 'glue' overhead.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-2-git-send-email-ying.huang@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pstore was using mutex locking to protect read/write access to the
backend plug-ins. This causes problems when pstore is executed in
an NMI context through panic() -> kmsg_dump().
This patch changes the mutex to a spin_lock_irqsave then also checks to
see if we are in an NMI context. If we are in an NMI and can't get the
lock, just print a message stating that and blow by the locking.
All this is probably a hack around the bigger locking problem but it
solves my current situation of trying to sleep in an NMI context.
Tested by loading the lkdtm module and executing a HARDLOCKUP which
will cause the machine to panic inside the nmi handler.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
IRQ_WORK is used by GHES, but it is selected by PERF_EVENT.
For now PERF_EVENT is selected by x86 by default, but
in concept, IRQ_WORK should be selected by GHES, not by others.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bit 0 of the support parameter to the OSC call should be set in order to
indicate that the OS supports the WHEA mechanism. Stuart Hayes tracked
an APEI issue on some Dell platforms down to this.
Reported-by: Stuart Hayes <Stuart_Hayes@Dell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some trivial conflicts due to other various merges
adding to the end of common lists sooner than this one.
arch/ia64/Kconfig
arch/powerpc/Kconfig
arch/x86/Kconfig
lib/Kconfig
lib/Makefile
Signed-off-by: Len Brown <len.brown@intel.com>
EINJ parameter support is only usable for some specific BIOS.
Originally, it is expected to have no harm for BIOS does not support
it. But now, we found it will cause issue (memory overwriting) for
some BIOS. So param support is disabled by default and only enabled
when newly added module parameter named "param_extension" is
explicitly specified.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
drivers/acpi/apei/ghes.c:542: warning: integer overflow in expression
drivers/acpi/apei/ghes.c:619: warning: integer overflow in expression
ghes.c:(.text+0x46289): undefined reference to `__udivdi3'
in function ghes_estatus_cache_add().
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Len Brown <len.brown@intel.com>
memory_failure_queue() is called when recoverable memory errors are
notified by firmware to do the recovery work.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
printk is used by GHES to report hardware errors. Ratelimit is
enforced on the printk to avoid too many hardware error reports in
kernel log. Because there may be thousands or even millions of
corrected hardware errors during system running.
Currently, a simple scheme is used. That is, the total number of
hardware error reporting is ratelimited. This may cause some issues
in practice.
For example, there are two kinds of hardware errors occurred in
system. One is corrected memory error, because the fault memory
address is accessed frequently, there may be hundreds error report
per-second. The other is corrected PCIe AER error, it will be
reported once per-second. Because they share one ratelimit control
structure, it is highly possible that only memory error is reported.
To avoid the above issue, an error record content based throttle
algorithm is implemented in the patch. Where after the first
successful reporting, all error records that are same are throttled for
some time, to let other kinds of error records have the opportunity to
be reported.
In above example, the memory errors will be throttled for some time,
after being printked. Then the PCIe AER error will be printked
successfully.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some APEI GHES recoverable errors are reported via NMI, but printk is
not safe in NMI context.
To solve the issue, a lock-less memory allocator is used to allocate
memory in NMI handler, save the error record into the allocated
memory, put the error record into a lock-less list. On the other
hand, an irq_work is used to delay the operation from NMI context to
IRQ context. The irq_work IRQ handler will remove nodes from
lock-less list, printk the error record and do some further processing
include recovery operation, then free the memory.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We'll never have a negative part, so just make this an unsigned int.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
EFI only provides small amounts of individual storage, and conventionally
puts metadata in the storage variable name. Rather than add a metadata
header to the (already limited) variable storage, it's easier for us to
modify pstore to pass all the information we need to construct a unique
variable name to the appropriate functions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Some pstore implementations may not have a static context, so extend the
API to pass the pstore_info struct to all calls and allow for a context
pointer.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
APEI firmware first mode must be turned on explicitly on some
machines, otherwise there may be no GHES hardware error record for
hardware error notification. APEI bit in generic _OSC call can be
used to do that, but on some machine, a special WHEA _OSC call must be
used. This patch adds the support to that WHEA _OSC call.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some machine may have broken firmware so that GHES and firmware first
mode should be disabled. This patch adds support to that.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
GHES (Generic Hardware Error Source) is used to process hardware error
notification in firmware first mode. But because firmware first mode
can be turned on but can not be turned off, it is unreasonable to
unload the GHES module with firmware first mode turned on. To avoid
confusion, this patch makes GHES can be enabled/disabled in
configuration time, but not built as module and unloaded at run time.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch changes APEI EINJ and ERST to use apei_exec_run for
mandatory actions, and apei_exec_run_optional for optional actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some actions in APEI ERST and EINJ tables are optional, for example,
ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for
error injection, and firmware may choose to do nothing here. While
some other actions are mandatory, for example, firmware must provide
ACPI_EINJ_GET_ERROR_TYPE implementation.
Original implementation treats all actions as optional (that is, can
have no instructions), that may cause issue if firmware does not
provide some mandatory actions. To fix this, this patch adds
apei_exec_run_optional, which should be used for optional actions.
The original apei_exec_run should be used for mandatory actions.
Cc: Thomas Renninger <trenn@novell.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
printk is used by GHES to report hardware errors. Normally, the
printk will be ratelimited to avoid too many hardware error reports in
kernel log. Because there may be thousands or even millions of
corrected hardware errors during system running.
That is different for fatal hardware error, because system will go
panic as soon as possible, there will be no more than several error
records. And these error records are valuable for system fault
diagnosis, so they should not be ratelimited.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When we debug ERST table with erst-dbg, if the error record in ERST
table is too long(>4K), it can't be read out. So this patch increases
the buffer size to 16K to ensure such error records can be read from
ERST table.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
erst_dbg module can not work when ERST is disabled. So disable module
loading to provide clearer information to user.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The firmware on some machine will report duplicated hardware error
source ID in HEST. This is considered a firmware bug. To provide
better warning message, this patch adds duplicated hardware error
source ID detecting and corresponding printk.
This patch fixes#37412 on kernel bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=37412
Reported-by: marconifabio@ubuntu-it.org
Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Mathias <janedo.spam@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The presense of a writeq() implementation on 32-bit x86 that splits the
64-bit write into two 32-bit writes turns out to break the mpt2sas driver
(and in general is risky for drivers as was discussed in
<http://lkml.kernel.org/r/adaab6c1h7c.fsf@cisco.com>). To fix this,
revert 2c5643b1c5 ("x86: provide readq()/writeq() on 32-bit too") and
follow-on cleanups.
This unfortunately leads to pushing non-atomic definitions of readq() and
write() to various x86-only drivers that in the meantime started using the
definitions in the x86 version of <asm/io.h>. However as discussed
exhaustively, this is actually the right thing to do, because the right
way to split a 64-bit transaction is hardware dependent and therefore
belongs in the hardware driver (eg mpt2sas needs a spinlock to make sure
no other accesses occur in between the two halves of the access).
Build tested on 32- and 64-bit x86 allmodconfig.
Link: http://lkml.kernel.org/r/x86-32-writeq-is-broken@mdm.bga.com
Acked-by: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Acked-by: James Bottomley <James.Bottomley@parallels.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven ran a dependency checker which kicked out this warning:
+ warning: (ACPI_APEI) selects PSTORE which has unmet direct dependencies (MISC_FILESYSTEMS): => N/A
Randy confirmed that the fix was to "select MISC_FILESYSTEMS" too.
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
1) in the calling of erst_read, the parameter of buffer size
maybe overflows and cause crash
2) the return value of erst_read should be checked more strictly
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Currently after mount/remount operation on pstore filesystem,
the content on pstore will be lost. It is because current ERST
implementation doesn't support multi-user usage, which moves
internal pointer to the end after accessing it. Adding
multi-user support for pstore usage.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
the return type of function _read_ in pstore is size_t,
but in the callback function of _read_, the logic doesn't
consider it too much, which means if negative value (assuming
error here) is returned, it will be converted to positive because
of type casting. ssize_t is enough for this function.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The AER error information printing support is implemented in
drivers/pci/pcie/aer/aer_print.c. So some string constants, functions
and macros definitions can be re-used without being exported.
The original PCIe AER error information printing function is not
re-used directly because the overall format is quite different. And
changing the original printing format may make some original users'
scripts broken.
Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
APEI ERST firmware interface and implementation has no multiple users
in mind. For example, if there is four records in storage with ID: 1,
2, 3 and 4, if two ERST readers enumerate the records via
GET_NEXT_RECORD_ID as follow,
reader 1 reader 2
1
2
3
4
-1
-1
where -1 signals there is no more record ID.
Reader 1 has no chance to check record 2 and 4, while reader 2 has no
chance to check record 1 and 3. And any other GET_NEXT_RECORD_ID will
return -1, that is, other readers will has no chance to check any
record even they are not cleared by anyone.
This makes raw GET_NEXT_RECORD_ID not suitable for used by multiple
users.
To solve the issue, an in-memory ERST record ID cache is designed and
implemented. When enumerating record ID, the ID returned by
GET_NEXT_RECORD_ID is added into cache in addition to be returned to
caller. So other readers can check the cache to get all record ID
available.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 415e12b237 ("PCI/ACPI: Request _OSC control once for each root
bridge (v3)") put the acpi_hest_init() call in acpi_pci_root_init() into
a wrong place, presumably because the author confused acpi_pci_disabled
with acpi_disabled. Bring the code ordering in acpi_pci_root_init()
back to sanity.
Additionally, make sure that hest_disable is set when acpi_disabled is
set, which is going to prevent acpi_hest_parse(), that still may be
executed for acpi_disabled=1 through aer_acpi_firmware_first(), from
crashing because of uninitialized hest_tab.
Reported-and-tested-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI/PM: Report wakeup events before resuming devices
PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
PCI: sysfs: Update ROM to include default owner write access
x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
PCI/ACPI: Request _OSC control once for each root bridge (v3)
PCI: enable pci=bfsort by default on future Dell systems
PCI/PCIe: Clear Root PME Status bits early during system resume
PCI: pci-stub: ignore zero-length id parameters
x86/PCI: irq and pci_ids patch for Intel Patsburg
PCI: Skip id checking if no id is passed
PCI: fix __pci_device_probe kernel-doc warning
PCI: make pci_restore_state return void
PCI: Disable ASPM if BIOS asks us to
PCI: Add mask bit definition for MSI-X table
PCI: MSI: Move MSI-X entry definition to pci_regs.h
Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.
References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-by: Ozan Caglayan <ozan@pardus.org.tr>
Tested-by: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
ACPI: fix resource check message
ACPI / Battery: Update information on info notification and resume
ACPI: Drop device flag wake_capable
ACPI: Always check if _PRW is present before trying to evaluate it
ACPI / PM: Check status of power resources under mutexes
ACPI / PM: Rename acpi_power_off_device()
ACPI / PM: Drop acpi_power_nocheck
ACPI / PM: Drop acpi_bus_get_power()
Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
ACPI / Fan: Rework the handling of power resources
ACPI / PM: Register power resource devices as soon as they are needed
ACPI / PM: Register acpi_power_driver early
ACPI / PM: Add function for updating device power state consistently
ACPI / PM: Add function for device power state initialization
ACPI / PM: Introduce __acpi_bus_get_power()
ACPI / PM: Introduce function for refcounting device power resources
ACPI / PM: Add functions for manipulating lists of power resources
ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
ACPICA: Update version to 20101209
...
Generic Hardware Error Source provides a way to report platform
hardware errors (such as that from chipset). It works in so called
"Firmware First" mode, that is, hardware errors are reported to
firmware firstly, then reported to Linux by firmware. This way, some
non-standard hardware error registers or non-standard hardware link
can be checked by firmware to produce more valuable hardware error
information for Linux.
This patch adds POLL/IRQ/NMI notification types support.
Because the memory area used to transfer hardware error information
from BIOS to Linux can be determined only in NMI, IRQ or timer
handler, but general ioremap can not be used in atomic context, so a
special version of atomic ioremap is implemented for that.
Known issue:
- Error information can not be printed for recoverable errors notified
via NMI, because printk is not NMI-safe. Will fix this via delay
printing to IRQ context via irq_work or make printk NMI-safe.
v2:
- adjust printk format per comments.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The 'error record serialization table' in ACPI provides a suitable
amount of persistent storage for use by the pstore filesystem.
Signed-off-by: Tony Luck <tony.luck@intel.com>
printk is one of the methods to report hardware errors to user space.
This patch implements hardware error reporting for GHES via printk.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In APEI, Hardware error information reported by firmware to Linux
kernel is in the data structure of APEI generic error status (struct
acpi_hes_generic_status). While now printk is used by Linux kernel to
report hardware error information to user space.
So, this patch adds printing support for the data structure, so that
the corresponding hardware error information can be reported to user
space via printk.
PCIe AER information printing is not implemented yet. Will refactor the
original PCIe AER information printing code to avoid code duplicating.
The output format is as follow:
<error record> :=
APEI generic hardware error status
severity: <integer>, <severity string>
section: <integer>, severity: <integer>, <severity string>
flags: <integer>
<section flags strings>
fru_id: <uuid string>
fru_text: <string>
section_type: <section type string>
<section data>
<severity string>* := recoverable | fatal | corrected | info
<section flags strings># :=
[primary][, containment warning][, reset][, threshold exceeded]\
[, resource not accessible][, latent error]
<section type string> := generic processor error | memory error | \
PCIe error | unknown, <uuid string>
<section data> :=
<generic processor section data> | <memory section data> | \
<pcie section data> | <null>
<generic processor section data> :=
[processor_type: <integer>, <proc type string>]
[processor_isa: <integer>, <proc isa string>]
[error_type: <integer>
<proc error type strings>]
[operation: <integer>, <proc operation string>]
[flags: <integer>
<proc flags strings>]
[level: <integer>]
[version_info: <integer>]
[processor_id: <integer>]
[target_address: <integer>]
[requestor_id: <integer>]
[responder_id: <integer>]
[IP: <integer>]
<proc type string>* := IA32/X64 | IA64
<proc isa string>* := IA32 | IA64 | X64
<processor error type strings># :=
[cache error][, TLB error][, bus error][, micro-architectural error]
<proc operation string>* := unknown or generic | data read | data write | \
instruction execution
<proc flags strings># :=
[restartable][, precise IP][, overflow][, corrected]
<memory section data> :=
[error_status: <integer>]
[physical_address: <integer>]
[physical_address_mask: <integer>]
[node: <integer>]
[card: <integer>]
[module: <integer>]
[bank: <integer>]
[device: <integer>]
[row: <integer>]
[column: <integer>]
[bit_position: <integer>]
[requestor_id: <integer>]
[responder_id: <integer>]
[target_id: <integer>]
[error_type: <integer>, <mem error type string>]
<mem error type string>* :=
unknown | no error | single-bit ECC | multi-bit ECC | \
single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort | \
target abort | parity error | watchdog timeout | invalid address | \
mirror Broken | memory sparing | scrub corrected error | \
scrub uncorrected error
<pcie section data> :=
[port_type: <integer>, <pcie port type string>]
[version: <integer>.<integer>]
[command: <integer>, status: <integer>]
[device_id: <integer>:<integer>:<integer>.<integer>
slot: <integer>
secondary_bus: <integer>
vendor_id: <integer>, device_id: <integer>
class_code: <integer>]
[serial number: <integer>, <integer>]
[bridge: secondary_status: <integer>, control: <integer>]
<pcie port type string>* := PCIe end point | legacy PCI end point | \
unknown | unknown | root port | upstream switch port | \
downstream switch port | PCIe to PCI/PCI-X bridge | \
PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \
root complex event collector
Where, [] designate corresponding content is optional
All <field string> description with * has the following format:
field: <integer>, <field string>
Where value of <integer> should be the position of "string" in <field
string> description. Otherwise, <field string> will be "unknown".
All <field strings> description with # has the following format:
field: <integer>
<field strings>
Where each string in <fields strings> corresponding to one set bit of
<integer>. The bit position is the position of "string" in <field
strings> description.
For more detailed explanation of every field, please refer to UEFI
specification version 2.3 or later, section Appendix N: Common
Platform Error Record.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Properly const-, __init-, and __read_mostly-annotate this code.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ERST writing may be used in NMI or Machine Check Exception handler. So
it need to use raw spinlock instead of normal spinlock. This patch
fixes it.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
