Commit graph

6084 commits

Author SHA1 Message Date
Pavel Pisa
999331af45 [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
Patch from Pavel Pisa

This patch contains simplified set of changes to add scatter-gather
emulation capability into MX1 DMA support. The result should
be still usable for next combination of DMA transfers
  Statter-Gather/linear/2D/FIFO to linear/2D/FIFO and
  linear/2D/FIFO to Statter-Gather/2D/FIFO
The patch corrects channel priority allocation to be compatible
with MX1 hardware implementation.
Previous code has not been adapted from its PXA original.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:58:37 +01:00
Lennert Buytenhek
7ba01f9728 [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
Patch from Lennert Buytenhek

Instantiate the recently merged m48t86 rtc driver in the ts72xx code.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:17:40 +01:00
Lennert Buytenhek
41658132e6 [ARM] 3450/1: ep93xx: use the ep93xx rtc driver
Patch from Lennert Buytenhek

Instantiate the recently merged ep93xx rtc driver in the ep93xx code.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:17:34 +01:00
Ben Dooks
272eb575eb [ARM] 3452/1: [S3C2410] RX3715 - add nand information
Patch from Ben Dooks

NAND definitions for the HP iPAQ RX3715's
internal NAND flash

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:16:15 +01:00
Ben Dooks
661e6acf7b [ARM] 3449/1: [S3C2410] Anubis - fix NAND timings
Patch from Ben Dooks

The NAND timings on the Anubis are too large
to be selected when running at 133MHz memory
clock.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 10:32:46 +01:00
Ben Dooks
2b2ee1585a [ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL
Patch from Ben Dooks

Fix the bug in the UPLL enable code which should
have put a 200uS delay in if enabling the USB PLL
from the state where it is off.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 10:00:10 +01:00
Ben Dooks
dee9b2e932 [ARM] 3442/1: [S3C2410] SMDK: NAND device setup
Patch from Ben Dooks

Add SMDK2410/SMDK2440 NAND device information
and default partition table.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 10:00:09 +01:00
Ben Dooks
66ce229fe0 [ARM] 3447/1: [S3C2410] SMDK - default LEDs to off
Patch from Ben Dooks

Set default state of LEDs to off

Fixes context of Patch #3442/1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 10:00:08 +01:00
Adrian Bunk
733f896927 Merge with git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2006-04-02 10:37:38 +02:00
Dmitry Torokhov
95d465fd75 Manual merge with Linus.
Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c
2006-04-02 00:08:05 -05:00
Stephen Rothwell
856d08ec46 [PATCH] powerpc: iSeries needs slb_initialize to be called
Since the powerpc 64k pages patch went in, systems that have SLBs
(like Power4 iSeries) needed to have slb_initialize called to set up
some variables for the SLB miss handler.  This was not being called
on the boot processor on iSeries, so on single cpu iSeries machines,
we would get apparent memory curruption as soon as we entered user mode.

This patch fixes that by calling slb_initialize on the boot cpu if the
processor has an SLB.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-02 09:32:15 +10:00
Lennert Buytenhek
23759dc643 [ARM] 3439/2: xsc3: add I/O coherency support
Patch from Lennert Buytenhek

This patch adds support for the I/O coherent cache available on the
xsc3.  The approach is to provide a simple API to determine whether the
chipset supports coherency by calling arch_is_coherent() and then
setting the appropriate system memory PTE and PMD bits.  In addition,
we call this API on dma_alloc_coherent() and dma_map_single() calls.
A generic version exists that will compile out all the coherency-related
code that is not needed on the majority of ARM systems.

Note that we do not check for coherency in the dma_alloc_writecombine()
function as that still requires a special PTE setting.  We also don't
touch dma_mmap_coherent() as that is a special ARM-only API that is by
definition only used on non-coherent system.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 00:07:39 +01:00
Ben Dooks
d3f4c571b6 [ARM] 3440/1: [S3C2410] make SMDK2410 and SMDK2440 similarities common
Patch from Ben Dooks

The SMDK2410 and SMDK2440 boards have a number of items
in common, including the LEDs, Ethernet, PCMCIA. Make
a common SMDK support file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 18:33:42 +01:00
Lennert Buytenhek
532bda5d9c [ARM] 3438/1: ixp23xx: add pci slave support
Patch from Lennert Buytenhek

On the Double Espresso board, the IXP2350s are PCI slave devices and
we skip calling pci_common_init() as that enumerates the bus.  But even
though we are a PCI slave device, there is still some PCI-related setup
that has to be done.

Create ixp23xx_pci_common_init(), move the common initialisation bits
there, and have this function called from both the PCI master and the
PCI slave init path.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 18:33:35 +01:00
Paul Mackerras
2c6967750a powerpc: hook up the splice syscall
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 23:27:23 +11:00
Dave Jones
cfff5b23ba [PATCH] powerpc/cell: compile fixes
Missing include for __NR_syscalls, and missing sys_splice() that
causes build-time failure due to compile-time bounds check on
spu_syscall_table.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:14 +11:00
Anton Blanchard
fc5266ea52 [PATCH] powerpc: trivial spelling fixes in fault.c
This comment exceeded my bad spelling threshold :)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:13 +11:00
Nathan Fontenot
794e085e56 [PATCH] powerpc/pseries: EEH Cleanup
This patch removes unnecessary exports, marks functions as static when
possible, and simplifies some list-related code.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:11 +11:00
Will Schmidt
34422fed65 [PATCH] powerpc/pseries: misc lparcfg fixes
This fixes several problems with the lparcfg code.  In case
someone gets a sense of deja-vu, part of this was submitted last Sep, I
thought the changes went in, but either got backed out, or just got
lost.

First, change the local_buffer declaration to be unsigned char *.  We
had a bad-math problem in a 2.4 tree which was built with a
"-fsigned-char" parm.  I dont believe we ever build with that parm
now-a-days, but to be safe, I'd prefer the declaration be explicit.

Second, fix a bad math calculation for splpar_strlen.

Third, on the rtas_call for get-system-parameter, pass in
RTAS_DATA_BUF_SIZE for the rtas_data_buf size, instead of letting random
data determine the size.   Until recently, we've had a sufficiently
large 'random data' value get passed in, so the function just happens to
have worked OK.   Now it's getting passed a '0', which causes the
rtas_call to return success, but no data shows up in the buffer.
(oops!).   This was found by the LTC test org.

This is in a branch of code that only gets run on SPLPAR systems.
Tested on power5 Lpar.

Signed-off-by: Will Schmidt <willschm@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:07 +11:00
Linas Vepstas
a219be2cf4 [PATCH] powerpc/pseries: fix device name printing, again.
The recent patch to print device names in EEH reset messages
was lacking ... this patch works better.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:02 +11:00
Heiko J Schick
b13a96cfb0 [PATCH] powerpc: Extends HCALL interface for InfiniBand usage
This extends the HCALL interface for InfiniBand usage. I've
made the patch against the linux-2.6 git tree and Segher's patch:
[PATCH] Change H_StudlyCaps to H_SHOUTING_CAPS

We moved this into the common powerpc code based on comments we
got after posting the first eHCA InfiniBand device driver patch.

Signed-off-by: Heiko j Schick <schickhj@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:37:00 +11:00
Segher Boessenkool
706c8c93ba [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
Also cleans up some nearby whitespace problems.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:36:57 +11:00
Linas Vepstas
8df83028cf [PATCH] powerpc/pseries: print message if EEH recovery fails
The current code prints an ambiguous message if the recovery
of a failed PCI device fails. Give this special case its own
unique message.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:35:01 +11:00
Linas Vepstas
8c33fd11e3 [PATCH] powerpc/pseries: mutex lock to serialize EEH event processing
This forces the processing of EEH PCI events to be serialized,
using a very simple mutex lock. This serialization is required to
avoid races involving additional PCI device failures that may occur
during the recovery phase of a previous failure.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:35:01 +11:00
Pavel Machek
50c37e2161 [ARM] 3436/1: 2.6.16-git18: collie_defconfig broken
Patch from Pavel Machek

> The kautobuild found the following error while trying to build 2.6.16-git18
> using collie_defconfig:
>
> arch/arm/mach-sa1100/collie.c:92: error: 'collie_uart_set_mctrl' undeclared here (not in a function)
> arch/arm/mach-sa1100/collie.c:93: error: 'collie_uart_get_mctrl' undeclared here (not in a function)
> make[1]: *** [arch/arm/mach-sa1100/collie.o] Error 1
> make: *** [arch/arm/mach-sa1100] Error 2
> make: Leaving directory `/var/tmp/kernel-orig'

This fixes above compile error by adding missing pieces of uart
support, and fixes compilation.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 12:13:31 +01:00
Komal Shah
344b215b0d [ARM] 3437/1: Kill duplicate exports of string library functions
Patch from Komal Shah

This patch fixes the duplicate exports of string library functions.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 12:13:30 +01:00
Paul Mackerras
f18dd516d4 Merge branch 'for_paulus' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc 2006-04-01 22:08:26 +11:00
David S. Miller
289eee6fa7 [SPARC]: Wire up sys_sync_file_range() into syscall tables.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:49:34 -08:00
David S. Miller
1339713a32 [SPARC]: Wire up sys_splice() into the syscall tables.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:03:38 -08:00
David S. Miller
3cc1cc444f [SPARC64]: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:03:37 -08:00
David S. Miller
9df1dab1df [SPARC64]: Align address in huge_pte_alloc().
We are about to fill in all HPAGE_SIZE's worth
of PAGE_SIZE ptes, so we have to give the first
pte in that set else we scribble over random memory
when we fill in the ptes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:03:36 -08:00
David S. Miller
73c50a27a4 [SPARC64]: Document the instruction checks we do in do_sparc64_fault().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:03:35 -08:00
David S. Miller
6f25f3986a [SPARC64]: Make tsb_sync() mm comparison more precise.
switch_mm() changes the mm state and does a tsb_context_switch()
first, then we do the cpu register state switch which changes
current_thread_info() and current().

So it's safer to check the PGD physical address stored in the
trap block (which will be updated by the tsb_context_switch() in
switch_mm()) than current->active_mm.

Technically we should never run here in between those two
updates, because interrupts are disabled during the entire
context switch operation.  But some day we might like to leave
interrupts enabled during the context switch and this change
allows that to happen without any surprises.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 23:03:34 -08:00
Linus Torvalds
5b67e8dd5a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change
  [ARM] 3434/1: pxa i2s amsl define
  [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h
  [ARM] Allow un-muxed syscalls to be available for everyone
  [ARM] 3420/1: Missing clobber in example code
  [ARM] nommu: fixups for the exception vectors
  [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile
  [ARM] nommu: start-up code
  [ARM] nommu: MPU support in boot/compressed/head.S
2006-03-31 21:33:07 -08:00
Linus Torvalds
a8b59e79ed Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Avoid "u64 foo : 32;" for gcc3 vs. gcc4 compatibility
  [IA64] Export cpu cache info by sysfs
2006-03-31 21:31:40 -08:00
Horms
36a891b67f kexec: grammar fix for crash_save_this_cpu()
kexec: grammar fix for crash_save_this_cpu()

Signed-Off-By: Horms <horms@verge.net.au>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:39:17 +02:00
Adrian Bunk
0cb3463f04 [PATCH] unexport get_wchan
The only user of get_wchan is the proc fs - and proc can't be built modular.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:01 -08:00
Richard Purdie
2c0f5fb08e [PATCH] backlight: corgi_bl: Generalise to support other Sharp SL hardware
Generalise the Corgi backlight driver by moving the default intensity and
limit mask settings into the platform specific data structure.  This enables
the driver to support other Zaurus hardware, specifically the SL-6000x (Tosa)
model.

Also change the spinlock to a mutex (the spinlock is overkill).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Dirk Opfer
6d0cf3e048 [PATCH] LED: add device support for tosa
Adds LED drivers for LEDs found on the Sharp Zaurus c6000 model (tosa).

Signed-off-by: Dirk Opfer <dirk@opfer-online.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
3179108daa [PATCH] LED: add LED device support for the zaurus corgi and spitz models
Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd,
husky) and cxx00 (akita, spitz, borzoi) models.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
181bf8aa68 [PATCH] LED: add sharp charger status LED trigger
Add an LED trigger for the charger status as found on the Sharp Zaurus series
of devices.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
c72a1d608d [PATCH] LED: add LED class
Add the foundations of a new LEDs subsystem.  This patch adds a class which
presents LED devices within sysfs and allows their brightness to be
controlled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Andrew Morton
f79e2abb9b [PATCH] sys_sync_file_range()
Remove the recently-added LINUX_FADV_ASYNC_WRITE and LINUX_FADV_WRITE_WAIT
fadvise() additions, do it in a new sys_sync_file_range() syscall instead.
Reasons:

- It's more flexible.  Things which would require two or three syscalls with
  fadvise() can be done in a single syscall.

- Using fadvise() in this manner is something not covered by POSIX.

The patch wires up the syscall for x86.

The sycall is implemented in the new fs/sync.c.  The intention is that we can
move sys_fsync(), sys_fdatasync() and perhaps sys_sync() into there later.

Documentation for the syscall is in fs/sync.c.

A test app (sync_file_range.c) is in
http://www.zip.com.au/~akpm/linux/patches/stuff/ext3-tools.tar.gz.

The available-to-GPL-modules do_sync_file_range() is for knfsd: "A COMMIT can
say NFS_DATA_SYNC or NFS_FILE_SYNC.  I can skip the ->fsync call for
NFS_DATA_SYNC which is hopefully the more common."

Note: the `async' writeout mode SYNC_FILE_RANGE_WRITE will turn synchronous if
the queue is congested.  This is trivial to fix: add a new flag bit, set
wbc->nonblocking.  But I'm not sure that we want to expose implementation
details down to that level.

Note: it's notable that we can sync an fd which wasn't opened for writing.
Same with fsync() and fdatasync()).

Note: the code takes some care to handle attempts to sync file contents
outside the 16TB offset on 32-bit machines.  It makes such attempts appear to
succeed, for best 32-bit/64-bit compatibility.  Perhaps it should make such
requests fail...

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:54 -08:00
OGAWA Hirofumi
9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Jakub Jelinek
da2e9e1ff4 [PATCH] Mark unwind info for signal trampolines in vDSOs
Mark unwind info for signal trampolines using the new S augmentation flag
introduced in: http://gcc.gnu.org/PR26208.

GCC 4.2 (or patched earlier GCC) will be able to special case unwinding
through frames right above signal trampolines.  As the augmentations start
with z flag and S is at the very end of the augmentation string, older GCCs
will just skip the S flag as unknown (that's why an augmentation flag was
chosen over say a new CFA opcode).

Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
KAMEZAWA Hiroyuki
97db7fbfc7 [PATCH] for_each_possible_cpu: s390
for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Paolo 'Blaisorblade' Giarrusso
3feb88562d [PATCH] uml: check for differences in host support
If running on a host not supporting TLS (for instance 2.4) we should report
that cleanly to the user, instead of printing not comprehensible "error 5" for
that.

Additionally, i386 and x86_64 support different ranges for
user_desc->entry_number, and we must account for that; we couldn't pass
ourselves -1 because we need to override previously existing TLS descriptors
which glibc has possibly set, so test at startup the range to use.

x86 and x86_64 existing ranges are hardcoded.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Paolo 'Blaisorblade' Giarrusso
54d8d3b5a0 [PATCH] uml: add arch_switch_to for newly forked thread
Newly forked threads have no arch_switch_to_skas() called before their first
run, because when schedule() switches to them they're resumed in the body of
thread_wait() inside fork_handler() rather than in switch_threads() in
switch_to_skas().  Compensate this missing call.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Paolo 'Blaisorblade' Giarrusso
dd77aec07a [PATCH] uml: tls support: hack to make it compile on any host
Copy the definition of struct user_desc (with another name) for use by
userspace sources (where we use the host headers, and we can't be sure about
their content) to make sure UML compiles.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Paolo 'Blaisorblade' Giarrusso
aa6758d486 [PATCH] uml: implement {get,set}_thread_area for i386
Implement sys_[gs]et_thread_area and the corresponding ptrace operations for
UML.  This is the main chunk, additional parts follow.  This implementation is
now well tested and has run reliably for some time, and we've understood all
the previously existing problems.

Their implementation saves the new GDT content and then forwards the call to
the host when appropriate, i.e.  immediately when the target process is
running or on context switch otherwise (i.e.  on fork and on ptrace() calls).

In SKAS mode, we must switch registers on each context switch (because SKAS
does not switches tls_array together with current->mm).

Also, added get_cpu() locking; this has been done for SKAS mode, since TT does
not need it (it does not use smp_processor_id()).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00