This reverts commit e51af66308, which was
wrongly hoovered up and submitted about a month after a better fix had
already been merged.
The better fix is commit cbda1ba898
("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do
this blacklisting based on the DMI identification for the offending
motherboard, since sometimes this chipset (or at least a chipset with
the same PCI ID) apparently _does_ actually have an IOMMU.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: Optimize a bit the function return tracer
This patch changes the calling convention of prepare_ftrace_return to
pass its arguments by register. This will optimize it a bit and
prepare it to support dynamic tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove spinlocks and irq disabling in function return tracer.
I've tried to figure out all of the race condition that could happen
when the tracer pushes or pops a return address trace to/from the
current thread_info.
Theory:
_ One thread can only execute on one cpu at a time. So this code
doesn't need to be SMP-safe. Just drop the spinlock.
_ The only race could happen between the current thread and an
interrupt. If an interrupt is raised, it will increase the index of
the return stack storage and then execute until the end of the
tracing to finally free the index it used. We don't need to disable
irqs.
This is theorical. In practice, I've tested it with a two-core SMP and
had no problem at all. Perhaps -tip testing could confirm it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: name change of unlikely tracer and profiler
Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: Fix pit memory leak if unable to allocate irq source id
KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP
KVM: VMX: Set IGMT bit in EPT entry
KVM: Require the PCI subsystem
x86: KVM guest: fix section mismatch warning in kvmclock.c
KVM: ia64: Use guest signal mask when blocking
KVM: MMU: increase per-vcpu rmap cache alloc size
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (47 commits)
ACPI: pci_link: remove acpi_irq_balance_set() interface
fujitsu-laptop: Add DMI callback for Lifebook S6420
ACPI: EC: Don't do transaction from GPE handler in poll mode.
ACPI: EC: lower interrupt storm treshold
ACPICA: Use spinlock for acpi_{en|dis}able_gpe
ACPI: EC: restart failed command
ACPI: EC: wait for last write gpe
ACPI: EC: make kernel messages more useful when GPE storm is detected
ACPI: EC: revert msleep patch
thinkpad_acpi: fingers off backlight if video.ko is serving this functionality
sony-laptop: fingers off backlight if video.ko is serving this functionality
msi-laptop: fingers off backlight if video.ko is serving this functionality
fujitsu-laptop: fingers off backlight if video.ko is serving this functionality
eeepc-laptop: fingers off backlight if video.ko is serving this functionality
compal: fingers off backlight if video.ko is serving this functionality
asus-acpi: fingers off backlight if video.ko is serving this functionality
Acer-WMI: fingers off backlight if video.ko is serving this functionality
ACPI video: if no ACPI backlight support, use vendor drivers
ACPI: video: Ignore devices that aren't present in hardware
Delete an unwanted return statement at evgpe.c
...
Impact: fix bootup crash
the branch tracer missed arch/x86/vdso/vclock_gettime.c from
disabling tracing, which caused such bootup crashes:
[ 201.840097] init[1]: segfault at 7fffed3fe7c0 ip 00007fffed3fea2e sp 000077
also clean up the ugly ifdefs in arch/x86/kernel/vsyscall_64.c by
creating DISABLE_UNLIKELY_PROFILE facility for code to turn off
instrumentation on a per file basis.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new unlikely/likely profiler
Andrew Morton recently suggested having an in-kernel way to profile
likely and unlikely macros. This patch achieves that goal.
When configured, every(*) likely and unlikely macro gets a counter attached
to it. When the condition is hit, the hit and misses of that condition
are recorded. These numbers can later be retrieved by:
/debugfs/tracing/profile_likely - All likely markers
/debugfs/tracing/profile_unlikely - All unlikely markers.
# cat /debug/tracing/profile_unlikely | head
correct incorrect % Function File Line
------- --------- - -------- ---- ----
2167 0 0 do_arch_prctl process_64.c 832
0 0 0 do_arch_prctl process_64.c 804
2670 0 0 IS_ERR err.h 34
71230 5693 7 __switch_to process_64.c 673
76919 0 0 __switch_to process_64.c 639
43184 33743 43 __switch_to process_64.c 624
12740 64181 83 __switch_to process_64.c 594
12740 64174 83 __switch_to process_64.c 590
# cat /debug/tracing/profile_unlikely | \
awk '{ if ($3 > 25) print $0; }' |head -20
44963 35259 43 __switch_to process_64.c 624
12762 67454 84 __switch_to process_64.c 594
12762 67447 84 __switch_to process_64.c 590
1478 595 28 syscall_get_error syscall.h 51
0 2821 100 syscall_trace_leave ptrace.c 1567
0 1 100 native_smp_prepare_cpus smpboot.c 1237
86338 265881 75 calc_delta_fair sched_fair.c 408
210410 108540 34 calc_delta_mine sched.c 1267
0 54550 100 sched_info_queued sched_stats.h 222
51899 66435 56 pick_next_task_fair sched_fair.c 1422
6 10 62 yield_task_fair sched_fair.c 982
7325 2692 26 rt_policy sched.c 144
0 1270 100 pre_schedule_rt sched_rt.c 1261
1268 48073 97 pick_next_task_rt sched_rt.c 884
0 45181 100 sched_info_dequeued sched_stats.h 177
0 15 100 sched_move_task sched.c 8700
0 15 100 sched_move_task sched.c 8690
53167 33217 38 schedule sched.c 4457
0 80208 100 sched_info_switch sched_stats.h 270
30585 49631 61 context_switch sched.c 2619
# cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }'
39900 36577 47 pick_next_task sched.c 4397
20824 15233 42 switch_mm mmu_context_64.h 18
0 7 100 __cancel_work_timer workqueue.c 560
617 66484 99 clocksource_adjust timekeeping.c 456
0 346340 100 audit_syscall_exit auditsc.c 1570
38 347350 99 audit_get_context auditsc.c 732
0 345244 100 audit_syscall_entry auditsc.c 1541
38 1017 96 audit_free auditsc.c 1446
0 1090 100 audit_alloc auditsc.c 862
2618 1090 29 audit_alloc auditsc.c 858
0 6 100 move_masked_irq migration.c 9
1 198 99 probe_sched_wakeup trace_sched_switch.c 58
2 2 50 probe_wakeup trace_sched_wakeup.c 227
0 2 100 probe_wakeup_sched_switch trace_sched_wakeup.c 144
4514 2090 31 __grab_cache_page filemap.c 2149
12882 228786 94 mapping_unevictable pagemap.h 50
4 11 73 __flush_cpu_slab slub.c 1466
627757 330451 34 slab_free slub.c 1731
2959 61245 95 dentry_lru_del_init dcache.c 153
946 1217 56 load_elf_binary binfmt_elf.c 904
102 82 44 disk_put_part genhd.h 206
1 1 50 dst_gc_task dst.c 82
0 19 100 tcp_mss_split_point tcp_output.c 1126
As you can see by the above, there's a bit of work to do in rethinking
the use of some unlikelys and likelys. Note: the unlikely case had 71 hits
that were more than 25%.
Note: After submitting my first version of this patch, Andrew Morton
showed me a version written by Daniel Walker, where I picked up
the following ideas from:
1) Using __builtin_constant_p to avoid profiling fixed values.
2) Using __FILE__ instead of instruction pointers.
3) Using the preprocessor to stop all profiling of likely
annotations from vsyscall_64.c.
Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar
for their feed back on this patch.
(*) Not ever unlikely is recorded, those that are used by vsyscalls
(a few of them) had to have profiling disabled.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This removes the acpi_irq_balance_set() interface from the PCI
interrupt link driver.
x86 used acpi_irq_balance_set() to tell the PCI interrupt link
driver to configure links to minimize IRQ sharing. But the link
driver can easily figure out whether to turn on IRQ balancing
based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of
that external interface.
It's better for the driver to figure this out at init-time. If
we set it externally via the x86 code, the interface reduces
modularity, and we depend on the fact that acpi_process_madt()
happens before we process the kernel command line.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
WARNING: arch/x86/kernel/built-in.o(.text+0x1722c): Section mismatch
in reference from the function kvm_setup_secondary_clock() to the
function .devinit.text:setup_secondary_APIC_clock()
The function kvm_setup_secondary_clock() references
the function __devinit setup_secondary_APIC_clock().
This is often because kvm_setup_secondary_clock lacks a __devinit
annotation or the annotation of setup_secondary_APIC_clock is wrong.
Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
fix:
arch/x86/kernel/ftrace.c: In function 'ftrace_return_to_handler':
arch/x86/kernel/ftrace.c:112: error: implicit declaration of function 'cpu_clock'
cpu_clock() is implicitly included via a number of ways, but its real
location is sched.h. (Build failure is triggerable if enough other
kernel components are turned off.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/ftrace.c: Assembler messages:
arch/x86/kernel/ftrace.c:140: Error: missing ')'
arch/x86/kernel/ftrace.c:140: Error: junk `(%ebp))' after expression
arch/x86/kernel/ftrace.c:141: Error: missing ')'
arch/x86/kernel/ftrace.c:141: Error: junk `(%ebp))' after expression
the [parent_replaced] is used in an =rm fashion, so that constraint
is correct in isolation - but [parent_old] aliases register %0 and uses
it in an addressing mode that is only valid with registers - so change
the constraint from =rm to =r.
This fixes the build failure.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add infrastructure for function-return tracing
Add low level support for ftrace return tracing.
This plug-in stores return addresses on the thread_info structure of
the current task.
The index of the current return address is initialized when the task
is the first one (init) and when a process forks (the child). It is
not needed when a task does a sys_execve because after this syscall,
it still needs to return on the kernel functions it called.
Note that the code of return_to_handler has been suggested by Steven
Rostedt as almost all of the ideas of improvements in this V3.
For purpose of security, arch/x86/kernel/process_32.c is not traced
because __switch_to() changes the current task during its execution.
That could cause inconsistency in the stored return address of this
function even if I didn't have any crash after testing with tracing on
this function enabled.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some functions that may be called from this handler require that
interrupts are disabled. Also, combining IRQF_DISABLED and
IRQF_SHARED does not reliably disable interrupts in a handler, so
remove IRQF_SHARED from the irq flags (this irq is not shared anyway).
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Cc: mingo@elte.hu
Cc: venkatesh.pallipadi@intel.com
Cc: "Will Newton" <will.newton@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In hpet_next_event() we check that the value we just wrote to
HPET_Tn_CMP(timer) has reached the chip. Currently, we're checking that
the value we wrote to HPET_Tn_CMP(timer) is in HPET_T0_CMP, which, if
timer is anything other than timer 0, is likely to fail.
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Cc: mingo@elte.hu
Cc: venkatesh.pallipadi@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It is possible to flood the console with call traces if the WARN_ON
condition is true because of the frequency with which this function is
called.
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Cc: mingo@elte.hu
Cc: venkatesh.pallipadi@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: widen BTS/PEBS ptrace enablement to more CPU models
Move BTS initialisation out of an #ifdef CONFIG_X86_64 guard.
Assume core2 BTS and DS layout for future models of family 6 processors.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
setup_ioapic_dest() is called after the non boot cpus have been
brought up. It sets the irq affinity of all already configured
interrupts to all cpus and ignores affinity settings which were
done by the early bootup code.
If the IRQ_NO_BALANCING or IRQ_AFFINITY_SET flags are set then use the
affinity mask from the irq descriptor and not TARGET_CPUS.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
variant of __cycles_2_ns().
Most of the time sched_clock() is called with irqs disabled already.
The few places that call it with irqs enabled need to be updated.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit c7ffa6c262.
the assumptio of this change was that this would not break
any existing machine. Andrey Borzenkov reported troubles with
the ACPI reboot method: the system would hang on reboot, necessiating
a power cycle. Probably more systems are affected as well.
Also, there are patches queued up for v2.6.29 to disable virtualization
on emergency_restart() - which was the original motivation of
this change.
Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Bisected-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lazy flushing needs to take care of the unmap path too which is not yet
implemented and leads to stale IO/TLB entries. This is fixed by this
patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Impact: fix rare x2apic hang
On x86, x2apic mode accesses for sending IPI's don't have serializing
semantics. If the IPI receivner refers(in lock-free fashion) to some
memory setup by the sender, the need for smp_mb() before sending the
IPI becomes critical in x2apic mode.
Add the smp_mb() in native_flush_tlb_others() before sending the IPI.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: quick start and stop of function tracer
This patch adds a way to disable the function tracer quickly without
the need to run kstop_machine. It adds a new variable called
function_trace_stop which will stop the calls to functions from mcount
when set. This is just an on/off switch and does not handle recursion
like preempt_disable().
It's main purpose is to help other tracers/debuggers start and stop tracing
fuctions without the need to call kstop_machine.
The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs
that implement the testing of the function_trace_stop in the mcount
arch dependent code. Otherwise, the test is done in the C code.
x86 is the only arch at the moment that supports this.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins
On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can
return a value larger than NR_IRQS. This will lead to probe_irq_on()
overrunning the irq_desc array.
I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a
Supermicro dual Xeon system. NR_IRQS is 224 but probe_nr_irqs() detects
5 IOAPICs and returns 240. Here are the log messages:
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Tue Nov 4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24])
Tue Nov 4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48])
Tue Nov 4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72])
Tue Nov 4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96])
Tue Nov 4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119
Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Tue Nov 4 16:53:47 2008 Enabling APIC mode: Flat. Using 5 I/O APICs
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix udelay when "notsc" boot parameter is passed
With notsc passed on commandline, tsc may not be used for
udelays, make sure that we do not use tsc_khz to calculate
the lpj value in such cases.
Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature
x86: build fix
This makes the late e820 resources use 'insert_resource_expand_to_fit()'
instead of doing a 'reserve_region_with_split()', and also avoids
marking them as IORESOURCE_BUSY.
This results in us being perfectly happy to use pre-existing PCI
resources even if they were marked as being in a reserved region, while
still avoiding any _new_ allocations in the reserved regions. It also
makes for a simpler and more accurate resource tree.
Example resource allocation from Jonathan Corbet, who has firmware that
has an e820 reserved entry that covered a big range (e0000000-fed003ff),
and that had various PCI resources in it set up by firmware.
With old kernels, the reserved range would force us to re-allocate all
pre-existing PCI resources, and his reserved range would end up looking
like this:
e0000000-fed003ff : reserved
fec00000-fec00fff : IOAPIC 0
fed00000-fed003ff : HPET 0
where only the pre-allocated special regions (IOAPIC and HPET) were kept
around.
With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's
resource tree looked like this:
e0000000-fe7fffff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
fe800000-fe8fffff : reserved
fe900000-fe9d9aff : reserved
fe9d9b00-fe9d9bff : 0000:00:1f.3
fe9d9b00-fe9d9bff : reserved
fe9d9c00-fe9d9fff : 0000:00:1a.7
fe9d9c00-fe9d9fff : reserved
fe9da000-fe9dafff : 0000:00:03.3
fe9da000-fe9dafff : reserved
fe9db000-fe9dbfff : 0000:00:19.0
fe9db000-fe9dbfff : reserved
fe9dc000-fe9dffff : 0000:00:1b.0
fe9dc000-fe9dffff : reserved
fe9e0000-fe9fffff : 0000:00:19.0
fe9e0000-fe9fffff : reserved
fea00000-fea7ffff : 0000:00:02.0
fea00000-fea7ffff : reserved
fea80000-feafffff : 0000:00:02.1
fea80000-feafffff : reserved
feb00000-febfffff : 0000:00:02.0
feb00000-febfffff : reserved
fec00000-fed003ff : reserved
fec00000-fec00fff : IOAPIC 0
fed00000-fed003ff : HPET 0
and because the reserved entry had been split and moved into the
individual resources, and because it used the IORESOURCE_BUSY flag, the
drivers that actually wanted to _use_ those resources couldn't actually
attach to them:
e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]
with this patch, the resource tree instead becomes
e0000000-fed003ff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
fe9d9b00-fe9d9bff : 0000:00:1f.3
fe9d9c00-fe9d9fff : 0000:00:1a.7
fe9d9c00-fe9d9fff : ehci_hcd
fe9da000-fe9dafff : 0000:00:03.3
fe9db000-fe9dbfff : 0000:00:19.0
fe9db000-fe9dbfff : e1000e
fe9dc000-fe9dffff : 0000:00:1b.0
fe9dc000-fe9dffff : ICH HD audio
fe9e0000-fe9fffff : 0000:00:19.0
fe9e0000-fe9fffff : e1000e
fea00000-fea7ffff : 0000:00:02.0
fea80000-feafffff : 0000:00:02.1
feb00000-febfffff : 0000:00:02.0
fec00000-fec00fff : IOAPIC 0
fed00000-fed003ff : HPET 0
ie the one reserved region now ends up surrounding all the PCI resources
that were allocated inside of it by firmware, and because it is not
marked BUSY, drivers have no problem attaching to the pre-allocated
resources.
Reported-and-tested-by: Jonathan Corbet <corbet@lwn.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: cleanup
This patch cleans up the NMI safe code for dynamic ftrace as suggested
by Andrew Morton.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix on certain UP configs
fix:
arch/x86/kernel/cpu/common.c: In function 'cpu_init':
arch/x86/kernel/cpu/common.c:1141: error: 'boot_cpu_id' undeclared (first use in this function)
arch/x86/kernel/cpu/common.c:1141: error: (Each undeclared identifier is reported only once
arch/x86/kernel/cpu/common.c:1141: error: for each function it appears in.)
Pull in asm/smp.h on UP, so that we get the definition of
boot_cpu_id.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/cpu/common.c: In function 'early_identify_cpu':
arch/x86/kernel/cpu/common.c:553: error: 'struct cpuinfo_x86' has no member named 'cpu_index'
as cpu_index is only available on SMP.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix /proc/cpuinfo output on x86/Voyager
Ever since
| commit 92cb7612ae
| Author: Mike Travis <travis@sgi.com>
| Date: Fri Oct 19 20:35:04 2007 +0200
|
| x86: convert cpuinfo_x86 array to a per_cpu array
We've had an extra field in cpuinfo_x86 which is cpu_index.
Unfortunately, voyager has never initialised this, although the only
noticeable impact seems to be that /proc/cpuinfo shows all zeros for
the processor ids.
Anyway, fix this by initialising the boot CPU properly and setting the
index when the secondaries update.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix on x86/Voyager
Given commits like this:
| Author: Suresh Siddha <suresh.b.siddha@intel.com>
| Date: Tue Jul 29 10:29:19 2008 -0700
|
| x86, xsave: enable xsave/xrstor on cpus with xsave support
Which deliberately expose boot cpu dependence to pieces of the system,
I think it's time to explicitly have a variable for it to prevent this
continual misassumption that the boot CPU is zero.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix x86/Voyager boot
CONFIG_SMP is used for features which work on *all* x86 boxes.
CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like
multi core and apics)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add more debug info to /debugfs/tracing/dyn_ftrace_total_info
This patch adds dynamic ftrace NMI update statistics to the
/debugfs/tracing/dyn_ftrace_total_info stat file.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crashes that can occur in NMI handlers, if their code is modified
Modifying code is something that needs special care. On SMP boxes,
if code that is being modified is also being executed on another CPU,
that CPU will have undefined results.
The dynamic ftrace uses kstop_machine to make the system act like a
uniprocessor system. But this does not address NMIs, that can still
run on other CPUs.
One approach to handle this is to make all code that are used by NMIs
not be traced. But NMIs can call notifiers that spread throughout the
kernel and this will be very hard to maintain, and the chance of missing
a function is very high.
The approach that this patch takes is to have the NMIs modify the code
if the modification is taking place. The way this works is that just
writing to code executing on another CPU is not harmful if what is
written is the same as what exists.
Two buffers are used: an IP buffer and a "code" buffer.
The steps that the patcher takes are:
1) Put in the instruction pointer into the IP buffer
and the new code into the "code" buffer.
2) Set a flag that says we are modifying code
3) Wait for any running NMIs to finish.
4) Write the code
5) clear the flag.
6) Wait for any running NMIs to finish.
If an NMI is executed, it will also write the pending code.
Multiple writes are OK, because what is being written is the same.
Then the patcher must wait for all running NMIs to finish before
going to the next line that must be patched.
This is basically the RCU approach to code modification.
Thanks to Ingo Molnar for suggesting the idea, and to Arjan van de Ven
for his guidence on what is safe and what is not.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
ftrace: fix current_tracer error return
tracing: fix a build error on alpha
ftrace: use a real variable for ftrace_nop in x86
tracing/ftrace: make boot tracer select the sched_switch tracer
tracepoint: check if the probe has been registered
asm-generic: define DIE_OOPS in asm-generic
trace: fix printk warning for u64
ftrace: warning in kernel/trace/ftrace.c
ftrace: fix build failure
ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
ftrace: remove ftrace hash
ftrace: remove mcount set
ftrace: remove daemon
ftrace: disable dynamic ftrace for all archs that use daemon
ftrace: add ftrace warn on to disable ftrace
ftrace: only have ftrace_kill atomic
ftrace: use probe_kernel
ftrace: comment arch ftrace code
ftrace: return error on failed modified text.
ftrace: dynamic ftrace process only text section
...
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: fix irqs on/off ip tracing
lockdep: minor fix for debug_show_all_locks()
x86: restore the old swiotlb alloc_coherent behavior
x86: use GFP_DMA for 24bit coherent_dma_mask
swiotlb: remove panic for alloc_coherent failure
xen: compilation fix of drivers/xen/events.c on IA64
xen: portability clean up and some minor clean up for xencomm.c
xen: don't reload cr3 on suspend
kernel/resource: fix reserve_region_with_split() section mismatch
printk: remove unused code from kernel/printk.c
Impact: fix AMD Family 11h boot hangs / USB device problems
The AMD Fam11h CPUs have a K8 northbridge. This northbridge is different
from other family's because it lacks GART support (as I just learned).
But the kernel implicitly expects a GART if it finds an AMD northbridge.
Fix this by removing the Fam11h northbridge id from the scan list of K8
northbridges. This patch also changes the message in the GART driver
about missing K8 northbridges to tell that the GART is missing which is
the correct information in this case.
Reported-by: Jouni Malinen <jkmalinen@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix kdump crash on 32-bit sparsemem kernels
Since linux-2.6.27, kdump has failed on i386 sparsemem kernel.
1st-kernel gets a panic just before switching to 2nd-kernel.
The cause is that a kernel accesses invalid mem_section by
page_to_pfn(image->swap_page) at machine_kexec().
image->swap_page is allocated if kexec for hibernation, but
it is not allocated if kdump. So if kdump, a kernel should
not access the mem_section corresponding to image->swap_page.
The attached patch fixes this invalid access.
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Cc: kexec-ml <kexec@lists.infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
As promised, now that dumpstack_32 and dumpstack_64 have so many bits
in common, we should merge the in-sync bits into a common file, to
prevent them from diverging again.
This patch removes bits which are common between dumpstack_32.c and
dumpstack_64.c and places them in a common dumpstack.c which is built
for both 32 and 64 bit arches.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/dumpstack.c | 319 +++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/dumpstack.h | 39 +++++
arch/x86/kernel/dumpstack_32.c | 294 -------------------------------------
arch/x86/kernel/dumpstack_64.c | 285 ------------------------------------
5 files changed, 363 insertions(+), 576 deletions(-)
Impact: avoid section mismatch warning, clean up
The dynamic ftrace determines which nop is safe to use at start up.
When it finds a safe nop for patching, it sets a pointer called ftrace_nop
to point to the code. All call sites are then patched to this nop.
Later, when tracing is turned on, this ftrace_nop variable is again used
to compare the location to make sure it is a nop before we update it to
an mcount call. If this fails just once, a warning is printed and ftrace
is disabled.
Rakib Mullick noted that the code that sets up the nop is a .init section
where as the nop itself is in the .text section. This is needed because
the nop is used later on after boot up. The problem is that the test of the
nop jumps back to the setup code and causes a "section mismatch" warning.
Rakib first recommended to convert the nop to .init.text, but as stated
above, this would fail since that text is used later.
The real solution is to extend Rabik's patch, and to make the ftrace_nop
into an array, and just save the code from the assembly to this array.
Now the section can stay as an init section, and we have a nop to use
later on.
Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: on SGI UV platforms, fix boot crash
UV initialization is currently called too late to call alloc_bootmem_pages().
The current sequence is:
start_kernel()
mem_init()
free_all_bootmem() <--- discard of bootmem
rest_init()
kernel_init()
smp_prepare_cpus()
native_smp_prepare_cpus()
uv_system_init() <--- uses alloc_bootmem_pages()
It should be calling kmalloc().
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Thu, Oct 23, 2008 at 04:09:52PM -0700, Alexander Beregalov wrote:
> arch/x86/kernel/built-in.o: In function `iommu_setup':
> pci-dma.c:(.init.text+0x36ad): undefined reference to `forbid_dac'
> pci-dma.c:(.init.text+0x36cc): undefined reference to `forbid_dac'
> pci-dma.c:(.init.text+0x3711): undefined reference to `forbid_dac
This patch partially reverts a patch to add IOMMU support to ia64. The
forbid_dac variable was incorrectly moved to quirks.c, which isn't built
when PCI is disabled.
Tested-by: "Alexander Beregalov" <a.beregalov@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This restores the old swiotlb alloc_coherent behavior (before the
alloc_coherent rewrite):
http://lkml.org/lkml/2008/8/12/200
The old alloc_coherent avoids GFP_DMA allocation first and if the
allocated address is not fit for the device's coherent_dma_mask, then
dma_alloc_coherent does GFP_DMA allocation. If it fails,
alloc_coherent calls swiotlb_alloc_coherent (in short, we rarely used
swiotlb_alloc_coherent).
After the alloc_coherent rewrite, dma_alloc_coherent
(include/asm-x86/dma-mapping.h) directly calls swiotlb_alloc_coherent.
It means that we possibly can't handle a device having dma_masks >
24bit < 32bits since swiotlb_alloc_coherent doesn't have the above
GFP_DMA retry mechanism.
This patch fixes x86's swiotlb alloc_coherent to use the GFP_DMA retry
mechanism, which dma_generic_alloc_coherent() provides now
(pci-nommu.c and GART IOMMU driver also use
dma_generic_alloc_coherent).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix section mismatch warning - apic_x2apic_phys
x86: fix section mismatch warning - apic_x2apic_cluster
x86: fix section mismatch warning - apic_x2apic_uv_x
x86: fix section mismatch warning - apic_physflat
x86: fix section mismatch warning - apic_flat
x86: memtest fix use of reserve_early()
x86 syscall.h: fix argument order
x86/tlb_uv: remove strange mc146818rtc include
x86: remove redundant KERN_DEBUG on pr_debug
x86: do_boot_cpu - check if we have ESR register
x86: MAINTAINERS change for AMD microcode patch loader
x86/proc: fix /proc/cpuinfo cpu offline bug
x86: call dmi-quirks for HP Laptops after early-quirks are executed
x86, kexec: fix hang on i386 when panic occurs while console_sem is held
MCE: Don't run 32bit machine checks with interrupts on
x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC
x86: make variables static
* 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
x86: canonicalize remaining header guards
x86: drop double underscores from header guards
x86: Fix ASM_X86__ header guards
x86, um: get rid of uml-config.h
x86, um: get rid of arch/um/Kconfig.arch
x86, um: get rid of arch/um/os symlink
x86, um: get rid of excessive includes of uml-config.h
x86, um: get rid of header symlinks
x86, um: merge Kconfig.i386 and Kconfig.x86_64
x86, um: get rid of sysdep symlink
x86, um: trim the junk from uml ptrace-*.h
x86, um: take vm-flags.h to sysdep
x86, um: get rid of uml asm/arch
x86, um: get rid of uml highmem.h
x86, um: get rid of uml unistd.h
x86, um: get rid of system.h -> system.h include
x86, um: uml atomic.h is not needed anymore
x86, um: untangle uml ldt.h
x86, um: get rid of more uml asm/arch uses
x86, um: remove dead header (uml module-generic.h; never used these days)
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits)
dock: make dock driver not a module
ACPI: fix ia64 build warning
ACPI: hack around sysfs warning with link order
ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n
intel_menlo: fix build warning
panasonic-laptop: fix build
ACPICA: Update version to 20080926
ACPICA: Add support for zero-length buffer-to-string conversions
ACPICA: New: Validation for predefined ACPI methods/objects
ACPICA: Fix for implicit return compatibility
ACPICA: Fixed a couple memory leaks associated with "implicit return"
ACPICA: Optimize buffer allocation procedure
ACPICA: Fix possible memory leak, error exit path
ACPICA: Fix fault after mem allocation failure in AML parser
ACPICA: Remove unused ACPI register bit definition
ACPICA: Update version to 20080829
ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname
ACPICA: Cleanup for internal Reference Object
ACPICA: Update comments - no functional changes
ACPICA: Update for Reference ACPI_OPERAND_OBJECT
...
* git://git.infradead.org/iommu-2.6:
Admit to maintaining VT-d, for my sins.
dmar: fix uninitialised 'ret' variable in dmar_parse_dev()
intel-iommu: use coherent_dma_mask in alloc_coherent
amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors
intel-iommu: IA64 support
dmar: remove the quirk which disables dma-remapping when intr-remapping enabled
dmar: Use queued invalidation interface for IOTLB and context invalidation
dmar: context cache and IOTLB invalidation using queued invalidation
dmar: use spin_lock_irqsave() in qi_submit_sync()
The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.
[ powerpc already had this in its Makefile. ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andrew Morton suggested using the proper API for reading and writing
kernel areas that might fault.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add comments to explain what is happening in the x86 arch ftrace code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Have the ftrace_modify_code return error values:
-EFAULT on error of reading the address
-EINVAL if what is read does not match what it expected
-EPERM if the write fails to update after a successful match.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:
a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xc008): Section mismatch in reference from the variable apic_x2apic_phys to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_phys references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf88): Section mismatch in reference from the variable apic_x2apic_cluster to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_cluster references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf08): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .init.text:uv_acpi_madt_oem_check()
The variable apic_x2apic_uv_x references
the function __init uv_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbe88): Section mismatch in reference from the variable apic_physflat to the function .init.text:physflat_acpi_madt_oem_check()
The variable apic_physflat references
the function __init physflat_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbe08): Section mismatch in reference from the variable apic_flat to the function .init.text:flat_acpi_madt_oem_check()
The variable apic_flat references
the function __init flat_acpi_madt_oem_check()
This is harmless, because the .acpi_madt_oem_check is only called
during init time. But we keep the function pointer around in a .data
function pointer template, so it's better we do not keep that stale
- so mark this function non-__init.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For some reason tlb_uv was including linux/mc146818rtc.h. It really
just needs linux/seq_file.h
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citix.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix APIC IRQ irregularities on certain older boxes
We should touch the APIC ESR register if only we have it.
The patch fixes the problem mentioned by Max Kellermann:
http://lkml.org/lkml/2008/10/17/147
Bisected-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
[ mingo@elte.hu: build fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix missing CPUs in /proc/cpuinfo after CPU hotunplug/hotreplug
In my test, I found that if a cpu has been offline,
the next cpus may not be shown in the /proc/cpuinfo.
if one read() cannot consume the whole /proc/cpuinfo,
c_start() will be called again in the next read() calls.
And *pos has been increased by 1 by the caller(seq_read()).
if this time the cpu#*pos is offline, c_start() will return
NULL, and the next cpus can not be shown.
this fix use next_cpu_nr(*pos - 1, cpu_online_map) to
search the next unshown cpu.
the most easy way to reproduce this bug:
1) offline cpu#1 (cpu#0 is online)
2) dd ibs=2 if=/proc/cpuinfo
the result is that only cpu#0 is shown.
cpu#2 and cpu#3 .... cannot be shown in /proc/cpuinfo
it's bug.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make warning message disappear - functionality unchanged
Problems with bogus IRQ0 override of those laptops should be fixed
with commits
x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC
x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC
that introduce early-quirks based on chipset configuration.
For further information, see
http://bugzilla.kernel.org/show_bug.cgi?id=11516
Instead of removing the related dmi-quirks completely we'd like to
keep them for (at least) one kernel version -- to double-check whether
the early-quirks really took effect. But the dmi-quirks need to be
called after early-quirks are executed. With this patch calling
sequence for dmi-quriks is changed as follows:
acpi_boot_table_init() (dmi-quirks)
...
early_quirks() (detect bogus IRQ0 override)
...
acpi_boot_init() (late dmi-quirks and setup IO APIC)
Note: Plan is to remove the "late dmi-quirks" with next kernel version.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make i386's die() equal to x86_64's version.
Whitespace-only changes on x86_64, to make it equal to i386's
version. (user_mode and user_mode_vm are equal on x86_64.)
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use oops_begin and oops_end in die_nmi.
Whitespace-only changes on x86_64, to make it equal to i386's
version.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
oops_begin/oops_end should always be used in pairs. On x86_64
oops_begin increments die_nest_count, and oops_end decrements
die_nest_count. Doing this makes oops_begin and oops_end equal
to the x86_64 versions.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Always call oops_exit from oops_end, even if signr==0.
Also, move add_taint(TAINT_DIE) from __die to oops_end
on x86_64 and interchange two lines to make oops_end
more similar to the i386-version.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
oops_end is preceded by either a call to __die, or a conditional
call to crash_kexec. Move the conditional call to crash_kexec
from the end of __die to the start of oops_end and remove
the superfluous call to crash_kexec in die_nmi.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change oops_end such that signr=0 signals that do_exit
is not to be called.
Currently, each use of __die is soon followed by a call
to oops_end and 'regs' is set to NULL if oops_end is expected
not to call do_exit. Change all such pairs to set signr=0
instead. On x86_64 oops_end is used 'bare' in die_nmi; use
signr=0 instead of regs=NULL there, too.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
crash_kexec should not be called with console_sem held. Move
the call before bust_spinlocks(0) in oops_end to avoid the
problem.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: "Neil Horman" <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's a corner case in 32 bit x86 kdump at the moment. When the box
panics via nmi, we call bust_spinlocks(1) to disable sensitivity to the
console_sem (allowing us to print to the console in all cases), but we don't
call crash_kexec, until after we call bust_spinlocks(0), which re-enables
console_sem sensitivity.
The result is that, if we get an nmi while the console_sem is held and
kdump is configured, and we try to print something to the console during
kdump shutdown (which we often do) we deadlock the box. The fix is to
simply do what 64 bit die_nmi does which is to not call bust_spinlocks(0)
until after we call crash_kexec.
Patch below tested successfully by me.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Running machine checks with interrupt on is a extremly bad idea. The machine
check handler only runs when the system is broken and needs to finish
as quickly as possible.
Remove the respective bogus post 2.6.27 regression and call
the machine check vector directly again.
This removes only code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[Cherry-picked from x86/mce]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: fix hung bootup and other misbehavior on certain laptops
On some more HP laptops BIOS reports an IRQ0 override
but the SB600 chipset is configured such that timer
interrupts go to INT0 of IOAPIC.
Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the
timer override.
See following bug reports:
http://bugzilla.kernel.org/show_bug.cgi?id=11715http://bugzilla.kernel.org/show_bug.cgi?id=11516
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
These variables are only used in their source files, so make them static.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
needed if the i7300_idle driver is to be modular.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
