Commit graph

480313 commits

Author SHA1 Message Date
Ilya Dryomov
792c3a9149 rbd: rbd workqueues need a resque worker
Need to use WQ_MEM_RECLAIM for our workqueues to prevent I/O lockups
under memory pressure - we sit on the memory reclaim path.

Cc: stable@vger.kernel.org # 3.17, needs backporting for 3.16
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Tested-by: Micha Krause <micha@krausam.de>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:05 -07:00
Ilya Dryomov
f9865f06f7 libceph: ceph-msgr workqueue needs a resque worker
Commit f363e45fd1 ("net/ceph: make ceph_msgr_wq non-reentrant")
effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq.  This is
wrong - libceph is very much a memory reclaim path, so restore it.

Cc: stable@vger.kernel.org # needs backporting for < 3.12
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Tested-by: Micha Krause <micha@krausam.de>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:04 -07:00
Fabian Frederick
ab6c2c3ebe ceph: fix bool assignments
Fix some coccinelle warnings:
fs/ceph/caps.c:2400:6-10: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2401:6-15: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2402:6-17: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2403:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2404:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2405:6-19: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2440:4-20: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2469:3-16: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2490:2-18: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2519:3-7: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2549:3-12: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2575:2-6: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2589:3-7: WARNING: Assignment of bool to 0/1

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-14 12:57:04 -07:00
Ilya Dryomov
25f897773b libceph: separate multiple ops with commas in debugfs output
For requests with multiple ops, separate ops with commas instead of \t,
which is a field separator here.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:03 -07:00
Ilya Dryomov
70b5bfa360 libceph: sync osd op definitions in rados.h
Bring in missing osd ops and strings, use macros to eliminate multiple
points of maintenance.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:02 -07:00
Fabian Frederick
eb179d3975 libceph: remove redundant declaration
ceph_release_page_vector was defined twice in libceph.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-14 12:57:02 -07:00
John Spray
14ed97033d ceph: additional debugfs output
MDS session state and client global ID is
useful instrumentation when testing.

Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14 12:57:01 -07:00
John Spray
a687ecaf50 ceph: export ceph_session_state_name function
...so that it can be used from the ceph debugfs
code when dumping session info.

Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14 12:56:50 -07:00
Yan, Zheng
b1ee94aa59 ceph: include the initial ACL in create/mkdir/mknod MDS requests
Current code set new file/directory's initial ACL in a non-atomic
manner.
Client first sends request to MDS to create new file/directory, then set
the initial ACL after the new file/directory is successfully created.

The fix is include the initial ACL in create/mkdir/mknod MDS requests.
So MDS can handle creating file/directory and setting the initial ACL in
one request.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:56:49 -07:00
Yan, Zheng
25e6bae356 ceph: use pagelist to present MDS request data
Current code uses page array to present MDS request data. Pages in the
array are allocated/freed by caller of ceph_mdsc_do_request(). If request
is interrupted, the pages can be freed while they are still being used by
the request message.

The fix is use pagelist to present MDS request data. Pagelist is
reference counted.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:56:49 -07:00
Yan, Zheng
e4339d28f6 libceph: reference counting pagelist
this allow pagelist to present data that may be sent multiple times.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:56:48 -07:00
Yan, Zheng
0abb43dcac ceph: fix llistxattr on symlink
only regular file and directory have vxattrs.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 12:56:48 -07:00
John Spray
dbd0c8bf79 ceph: send client metadata to MDS
Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax,
which includes additional client metadata to allow
the MDS to report on clients by user-sensible names
like hostname.

Signed-off-by: John Spray <john.spray@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 12:56:47 -07:00
David S. Miller
14cee8e377 Merge branch 'isdn'
Tilman Schmidt says:

====================
Coverity patches for drivers/isdn

Here's a series of patches for the ISDN CAPI subsystem and the
Gigaset ISDN driver.
Patches 1 to 7 are specific fixes for Coverity warnings.
Patches 8 to 11 fix related problems with the handling of invalid
CAPI command codes I noticed while working on this.
Patch 12 fixes an unrelated problem I noticed during the subsequent
regression tests.
It would be great if these could still be merged.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:39 -04:00
Tilman Schmidt
86f8ef2c48 isdn/gigaset: fix usb_gigaset write_cmd result race
In usb_gigaset function gigaset_write_cmd(), the length field of
the command buffer structure could be cleared by the transmit
tasklet before it was used for the function's return value.
Fix by copying to a local variable before scheduling the tasklet.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:35 -04:00
Tilman Schmidt
340184b35a isdn/capi: don't return NULL from capi_cmd2str()
capi_cmd2str() is used in many places to build log messages.
None of them is prepared to handle NULL as a result.
Change the function to return printable string "INVALID_COMMAND"
instead.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:35 -04:00
Tilman Schmidt
2bf3a09ea5 isdn/capi: handle CAPI 2.0 message parser failures
Have callers of capi_cmsg2message and capi_message2cmsg handle
non-zero return values indicating failure.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:35 -04:00
Tilman Schmidt
5510ab1804 isdn/capi: prevent NULL pointer dereference on invalid CAPI command
An invalid CAPI 2.0 command/subcommand combination may retrieve a
NULL pointer from the cpars[] array which will later be dereferenced
by the parser routines.
Fix by adding NULL pointer checks in strategic places.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:34 -04:00
Tilman Schmidt
854d23b77a isdn/capi: refactor command/subcommand table accesses
Encapsulate accesses to the CAPI 2.0 command/subcommand name and
parameter tables in a single place in preparation for redesign.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:34 -04:00
Tilman Schmidt
5362247a42 isdn/capi: prevent index overrun from command_2_index()
The result of the function command_2_index() is used to index two
arrays mnames[] and cpars[] with max. index 0x4e but in its current
form that function can produce results up to 3*(0x9+0x9)+0x7f =
0xb5.
Fix by clamping all result values potentially overrunning the arrays
to zero which is already handled as an invalid value.

Re-spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:34 -04:00
Tilman Schmidt
9ea8aa8d50 isdn/capi: correct capi20_manufacturer argument type mismatch
Function capi20_manufacturer() is declared with unsigned int cmd
argument but called with unsigned long.
Fix by correcting the function prototype since the actual argument
is part of the user visible API.

Spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:34 -04:00
Tilman Schmidt
b8324f9420 isdn/gigaset: fix non-heap pointer deallocation
at_state structures may be allocated individually or as part of a
cardstate or bc_state structure. The disconnect() function handled
both cases, creating a risk that it might try to deallocate an
at_state structure that had not been allocated individually.
Fix by splitting disconnect() into two variants handling cases
with and without an associated B channel separately, and adding
an explicit check.

Spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:34 -04:00
Tilman Schmidt
846ac30135 isdn/gigaset: fix NULL pointer dereference
In do_action, a NULL pointer might be passed to function start_dial
which will dereference it.
Fix by adding a check for NULL before the call.

Spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:33 -04:00
Tilman Schmidt
097933ddcd isdn/gigaset: limit raw CAPI message dump length
In dump_rawmsg, the length field from a received data package was
used unscrutinized, allowing an attacker to control the size of the
allocated buffer and the number of times the output loop iterates.
Fix by limiting to a reasonable value.

Spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:33 -04:00
Tilman Schmidt
ee7ff5fed2 isdn/gigaset: make sure controller name is null terminated
In gigaset_isdn_regdev, the name field may not have a null terminator
if the source string's length is equal to the buffer size.
Fix by zero filling the structure and excluding the last byte of the
name field from the copy.

Spotted with Coverity.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:33 -04:00
Tilman Schmidt
1bdc07ebab isdn/gigaset: missing break in do_facility_req
If we take the unsupported supplementary service notification mask
path, we end up falling through and overwriting the error code.
Insert a break statement to skip the remainder of the switch case
and proceed to sending the reply message.

Spotted with Coverity.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 15:05:33 -04:00
David S. Miller
f787d6c8dd Merge branch 'fec-ptp'
Luwei Zhou says:

====================
Enable FEC pps feather

Change from v2 to v3:
	-Using the default channel 0 to be PPS channel not PTP_PIN_SET/GETFUNC interface.
	-Using the linux definition of NSEC_PER_SEC.

Change from v1 to v2:
	- Fix the potential 32-bit multiplication overflow issue.
	- Optimize the hareware adjustment code to improve efficiency as Richard suggested
	- Use ptp PTP_PIN_SET/GETFUNC interface to set PPS channel not device tree
	and add PTP_PF_PPS enumeration
	- Modify comments style
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 14:45:17 -04:00
Luwei Zhou
278d240478 net: fec: ptp: Enable PPS output based on ptp clock
FEC ptp timer has 4 channel compare/trigger function. It can be used to
enable pps output.
The pulse would be ouput high exactly on N second. The pulse ouput high
on compare event mode is used to produce pulse per second.  The pulse
width would be one cycle based on ptp timer clock source.Since 31-bit
ptp hardware timer is used, the timer will wrap more than 2 seconds. We
need to reload the compare compare event about every 1 second.

Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 14:45:08 -04:00
Luwei Zhou
89bddcda7e net: fec: ptp: Use hardware algorithm to adjust PTP counter.
The FEC IP supports hardware adjustment for ptp timer. Refer to the description of
ENET_ATCOR and ENET_ATINC registers in the spec about the hardware adjustment. This
patch uses hardware support to adjust the ptp offset and frequency on the slave side.

Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Fugang Duan <b38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 14:45:08 -04:00
Luwei Zhou
f28460b229 net: fec: ptp: Use the 31-bit ptp timer.
When ptp switches from software adjustment to hardware ajustment, linux ptp can't converge.
It is caused by the IP limit. Hardware adjustment logcial have issue when ptp counter
runs over 0x80000000(31 bit counter). The internal IP reference manual already remove 32bit
free-running count support. This patch replace the 32-bit PTP timer with 31-bit.

Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 14:45:08 -04:00
Li RongQing
02ea80741a ipv6: remove aca_lock spinlock from struct ifacaddr6
no user uses this lock.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:15:15 -04:00
Alexei Starovoitov
e0ee9c1215 x86: bpf_jit: fix two bugs in eBPF JIT compiler
1.
JIT compiler using multi-pass approach to converge to final image size,
since x86 instructions are variable length. It starts with large
gaps between instructions (so some jumps may use imm32 instead of imm8)
and iterates until total program size is the same as in previous pass.
This algorithm works only if program size is strictly decreasing.
Programs that use LD_ABS insn need additional code in prologue, but it
was not emitted during 1st pass, so there was a chance that 2nd pass would
adjust imm32->imm8 jump offsets to the same number of bytes as increase in
prologue, which may cause algorithm to erroneously decide that size converged.
Fix it by always emitting largest prologue in the first pass which
is detected by oldproglen==0 check.
Also change error check condition 'proglen != oldproglen' to fail gracefully.

2.
while staring at the code realized that 64-byte buffer may not be enough
when 1st insn is large, so increase it to 128 to avoid buffer overflow
(theoretical maximum size of prologue+div is 109) and add runtime check.

Fixes: 622582786c ("net: filter: x86: internal BPF JIT")
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:13:14 -04:00
Eric Dumazet
b2532eb9ab tcp: fix ooo_okay setting vs Small Queues
TCP Small Queues (tcp_tsq_handler()) can hold one reference on
sk->sk_wmem_alloc, preventing skb->ooo_okay being set.

We should relax test done to set skb->ooo_okay to take care
of this extra reference.

Minimal truesize of skb containing one byte of payload is
SKB_TRUESIZE(1)

Without this fix, we have more chance locking flows into the wrong
transmit queue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:12:00 -04:00
Alexander Aring
31eff81e94 skbuff: fix ftrace handling in skb_unshare
If the skb is not dropped afterwards we should run consume_skb instead
kfree_skb. Inside of function skb_unshare we do always a kfree_skb,
doesn't depend if skb_copy failed or was successful.

This patch switch this behaviour like skb_share_check, if allocation of
sk_buff failed we use kfree_skb otherwise consume_skb.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:10:31 -04:00
Alexander Duyck
2c2b2f0cb9 fm10k: Add skb->xmit_more support
This change adds support for skb->xmit_more based on the changes that were
made to igb to support the feature.  The main changes are moving up the
check for maybe_stop_tx so that we can check netif_xmit_stopped to determine
if we must write the tail because we can add no further buffers.

Acked-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:09:14 -04:00
Chao Yu
a4483e8a42 ceph: remove redundant code for max file size verification
Both ceph_update_writeable_page and ceph_setattr will verify file size
with max size ceph supported.
There are two caller for ceph_update_writeable_page, ceph_write_begin and
ceph_page_mkwrite. For ceph_write_begin, we have already verified the size in
generic_write_checks of ceph_write_iter; for ceph_page_mkwrite, we have no
chance to change file size when mmap. Likewise we have already verified the size
in inode_change_ok when we call ceph_setattr.
So let's remove the redundant code for max file size verification.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 21:03:40 +04:00
Yan, Zheng
3b70b388e3 ceph: remove redundant io_iter_advance()
ceph_sync_read and generic_file_read_iter() have already advanced the
IO iterator.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 21:03:39 +04:00
Yan, Zheng
6cd3bcad0d ceph: move ceph_find_inode() outside the s_mutex
ceph_find_inode() may wait on freeing inode, using it inside the s_mutex
may cause deadlock. (the freeing inode is waiting for OSD read reply, but
dispatch thread is blocked by the s_mutex)

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 21:03:39 +04:00
Yan, Zheng
508b32d866 ceph: request xattrs if xattr_version is zero
Following sequence of events can happen.
  - Client releases an inode, queues cap release message.
  - A 'lookup' reply brings the same inode back, but the reply
    doesn't contain xattrs because MDS didn't receive the cap release
    message and thought client already has up-to-data xattrs.

The fix is force sending a getattr request to MDS if xattrs_version
is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client
does not have xattr.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 21:03:38 +04:00
Josh Durgin
b76f82398c rbd: set the remaining discard properties to enable support
max_discard_sectors must be set for the queue to support discard.
Operations implementing discard for rbd zero data, so report that.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:37 +04:00
Josh Durgin
d3246fb0da rbd: use helpers to handle discard for layered images correctly
Only allocate two osd ops for discard requests, since the
preallocation hint is only added for regular writes.  Use
rbd_img_obj_request_fill() to recreate the original write or discard
osd operations, isolating that logic to one place, and change the
assert in rbd_osd_req_create_copyup() to accept discard requests as
well.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:36 +04:00
Josh Durgin
3b434a2aff rbd: extract a method for adding object operations
rbd_img_request_fill() creates a ceph_osd_request and has logic for
adding the appropriate osd ops to it based on the request type and
image properties.

For layered images, the original rbd_obj_request is resent with a
copyup operation in front, using a new ceph_osd_request. The logic for
adding the original operations should be the same as when first
sending them, so move it to a helper function.

op_type only needs to be checked once, so create a helper for that as
well and call it outside the loop in rbd_img_request_fill().

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:35 +04:00
Josh Durgin
1c220881e3 rbd: make discard trigger copy-on-write
Discard requests are a form of write, so they should go through the
same process as plain write requests and trigger copy-on-write for
layered images.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:34 +04:00
Josh Durgin
d0265de7c3 rbd: tolerate -ENOENT for discard operations
Discard may try to delete an object from a non-layered image that does not exist.
If this occurs, the image already has no data in that range, so change the
result to success.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:33 +04:00
Josh Durgin
bef95455a4 rbd: fix snapshot context reference count for discards
Discards take a reference to the snapshot context of an image when
they are created.  This reference needs to be cleaned up when the
request is done just as it is for regular writes.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:32 +04:00
Josh Durgin
3c5df89367 rbd: read image size for discard check safely
In rbd_img_request_fill() the image size is only checked to determine
whether we can truncate an object instead of zeroing it for discard
requests. Take rbd_dev->header_rwsem while reading the image size, and
move this read into the discard check, so that non-discard ops don't
need to take the semaphore in this function.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14 21:03:32 +04:00
Guangliang Zhao
90e98c5229 rbd: initial discard bits from Guangliang Zhao
This patch add the discard support for rbd driver.

There are three types operation in the driver:
1. The objects would be removed if they completely contained
   within the discard range.
2. The objects would be truncated if they partly contained within
   the discard range, and align with their boundary.
3. Others would be zeroed.

A discard request from blkdev_issue_discard() is defined which
REQ_WRITE and REQ_DISCARD both marked and no data, so we must
check the REQ_DISCARD first when getting the request type.

This resolve:
	http://tracker.ceph.com/issues/190

[ Ilya Dryomov: This is incomplete and somewhat buggy, see follow up
  commits by Josh Durgin for refinements and fixes which weren't
  folded in to preserve authorship. ]

Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:31 +04:00
Guangliang Zhao
6d2940c881 rbd: extend the operation type
It could only handle the read and write operations now,
extend it for the coming discard support.

Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:30 +04:00
Guangliang Zhao
c622d22615 rbd: skip the copyup when an entire object writing
It need to copyup the parent's content when layered writing,
but an entire object write would overwrite it, so skip it.

Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:29 +04:00
Ilya Dryomov
70d045f660 rbd: add img_obj_request_simple() helper
To clarify the conditions and make it easier to add new ones.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14 21:03:28 +04:00