Commit graph

190 commits

Author SHA1 Message Date
Adrian Bunk
e4c780b1ff [PATCH] drivers/net/e1000/: possible cleanups
- make needlessly global functions static
- #if 0 the following unused global functions:
  - e1000_hw.c: e1000_mc_addr_list_update()
  - e1000_hw.c: e1000_read_reg_io()
  - e1000_hw.c: e1000_enable_pciex_master()
  - e1000_hw.c: e1000_ife_disable_dynamic_power_down()
  - e1000_hw.c: e1000_ife_enable_dynamic_power_down()
  - e1000_hw.c: e1000_write_ich8_word()
  - e1000_hw.c: e1000_duplex_reversal()
  - e1000_main.c: e1000_io_read()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:28 -04:00
David S. Miller
87f5032e0c [E1000]: Convert to netdev_alloc_skb
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02 13:38:27 -07:00
Auke Kok
36902f2e35 e1000: bump version to 7.1.9-k4
Bump the version to 7.1.9-k4 to indicate three extra changes.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14 16:14:55 -07:00
Auke Kok
eb0f8054dd e1000: fix panic on large frame receive when mtu=default
A panic was reported when receiving 1522 size packets if using
the default MTU. we should set the initial rx buffer length to the
value that e1000changemtu sets so that we can receive any packet
that would not be dropped by LPE=0.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-07-14 16:14:48 -07:00
Auke Kok
f235a2abb2 e1000: remove CRC bytes from measured packet length
After removing the hardware CRC stripping which causes problems with
SOL and related issues, we need to compensate for this changed size.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14 16:14:34 -07:00
Auke Kok
d3d9e484b2 e1000: Redo netpoll fix to address community concerns
The original suggested fix for netpoll was found to be racy on SMP
kernels. While it is highly unlikely that this race would ever be seen
in the real world due to current netpoll usage models, we implemented
this updated fix to address concerns.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14 16:14:23 -07:00
Andrew Morton
61ef5c00a6 [PATCH] e1000: irq naming update
Use the new names.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12 17:42:39 -04:00
Linus Torvalds
09075ef0fd Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEAD
* HEAD:
  [AX.25]: Use kzalloc
  [ATM] net/atm/clip.c: fix PROC_FS=n compile
  [PKT_SCHED]: act_api: Fix module leak while flushing actions
  [NET]: Fix IPv4/DECnet routing rule dumping
  [NET] gso: Fix up GSO packets with broken checksums
  [NET] gso: Add skb_is_gso
  [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init()
  [ATM]: fix possible recursive locking in skb_migrate()
  [ATM]: Typo in drivers/atm/Kconfig...
  [TG3]: add amd8131 to "write reorder" chipsets
  [NET]: Fix network device interface printk message priority
2006-07-09 15:50:41 -07:00
Herbert Xu
89114afd43 [NET] gso: Add skb_is_gso
This patch adds the wrapper function skb_is_gso which can be used instead
of directly testing skb_shinfo(skb)->gso_size.  This makes things a little
nicer and allows us to change the primary key for indicating whether an skb
is GSO (if we ever want to do that).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:34:32 -07:00
Jeff Garzik
c0bc8721b8 Merge branch 'upstream' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream
Conflicts:

	drivers/net/e1000/e1000_main.c
2006-07-05 14:32:39 -04:00
Thomas Gleixner
1fb9df5d30 [PATCH] irq-flags: drivers/net: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:51 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Auke Kok
e4ac9773be e1000: increase version to 7.1.9-k2
Increment the version to 7.1.9-k2

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:34 -07:00
Auke Kok
ae2c3860eb e1000: add ich8lan device ID's
Add the device ID's of the supported ICH8 LAN devices.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:30 -07:00
Auke Kok
1f9e7e3d32 e1000: allow user to disable ich8 lock loss workaround
The workaround for the ich8 lock loss problem is only needed for
a very small amount of systems. This adds an option for the user
to disable the workaround.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:26 -07:00
Auke Kok
cd94dd0b64 e1000: integrate ich8 support into driver
This hooks up the ich8 structure into the driver itself.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:22 -07:00
Auke Kok
d37ea5d562 e1000: add ich8lan core functions
This implements the core new functions needed for ich8's internal
NIC. This includes:

* ich8 specific read/write code
* flash/nvm access code
* software semaphore flag functions
* 10/100 PHY (fe - no gigabit speed) support for low-end versions
* A workaround for a powerdown sequence problem discovered that
affects a small number of motherboard.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:17 -07:00
Auke Kok
ab7bc0ad72 e1000: disable ERT
Hardware is reported to have problems with ERT. We disable it for
all hardware to make sure we are not seeing unexplainable user
problems.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:13 -07:00
Auke Kok
592600a053 e1000: check return value of _get_speed_and_duplex
We were not checking the return value of get_speed_and_duplex
properly, whih may contain an error value.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:09 -07:00
Auke Kok
ee04022a21 e1000: M88 PHY workaround
M88 rev 2 PHY needs a longer downshift to function properly. This adds
a much longer downshift counter for this specific device.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:08:03 -07:00
Auke Kok
f1b3a85354 e1000: fix adapter led blinking inconsistency
Several e1000 adapters were not blinking correctly or inconsistently. This
patch cleans this up and makes them all behave the same as far as possible.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:07:56 -07:00
Auke Kok
7dfee0cb1d e1000: disable CRC stripping workaround
CRC stripping is breaking SMBUS-connected BMC's. We disable this
feature to make it work. This fixes related bugs regarding SOL.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:07:50 -07:00
Auke Kok
4ca213a695 e1000: force register write flushes to circumvent broken platforms
A certain AMD64 bridge (8132) has an option to turn on write combining
which breaks our adapter. To circumvent this we need to flush every write.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:07:08 -07:00
Auke Kok
17231712ab e1000: rework module param code with uninitialized values
We can take uninitialized values into account which minimizes code
and allows us to simplify the parameter checking code greatly.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:59 -07:00
Auke Kok
864c4e45ec e1000: recycle skb
Recycle an skb to improve performance a bit.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:53 -07:00
Auke Kok
a5eafce2ce e1000: change printk into DPRINTK
Changing a printk message to make clear that this message is originating
from e1000.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:49 -07:00
Auke Kok
9a53a20298 e1000: add smart power down code
Smart Power Down is a power saving feature in newer e1000 hardware. We
disable it because it causes time to link to be long, but make it a
user choice.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:45 -07:00
Auke Kok
0cbabbb072 e1000: small performance tweak by removing double code
buffer_info is already filled at the end of this while() loop.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:41 -07:00
Auke Kok
6fdfef1624 e1000: fix CONFIG_PM blocks
e1000_suspend is called even when !CONFIG_PM. The non-PM code inside of it
is properly #ifdef'd. This fixes the compiler warnings when !CONFIG_PM.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:36 -07:00
Auke Kok
79f05bf0ba e1000: Make PHY powerup/down a function
In relation to the irq work done earlier we also move the PHY powerup
and powerdown functions into separate functions and move the calls to
_close and _open, making the PHY stay in it's power state as long as
the device is _up.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:32 -07:00
Auke Kok
2db10a081c e1000: rework driver hardware reset locking
After studying the driver mac reset code it was found that there
were multiple race conditions possible to reset the unit twice or
bring it e1000_up() double. This fixes all occurences where the
driver needs to reset the mac.

We also remove irq requesting/releasing into _open and _close so
that while the device is _up we will never touch the irq's. This fixes
the double free irq bug that people saw.

To make sure that the watchdog task doesn't cause another race we let
it run as a non-scheduled task.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:28 -07:00
Auke Kok
acfbc9fde2 e1000: fix loopback ethtool test
Ethtool was reporting that loopback failed randomly on esb2
systems. Upon study it was found that the phy manual was changed
with respect to the loopback mode bits. The new value fixes it.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27 09:06:24 -07:00
Herbert Xu
7967168cef [NET]: Merge TSO/UFO fields in sk_buff
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 02:07:29 -07:00
Linas Vepstas
282f33c986 [PATCH] e1000: prevent statistics from getting garbled during reset
If a PCI bus error/fault triggers a PCI bus reset, attempts to get the
ethernet packet count statistics from the hardware will fail, returning
garbage data upstream.  This patch skips statistics data collection if the
PCI device is not on the bus.

This patch presumes that an earlier patch,
[PATCH] PCI Error Recovery: e1000 network device driver
has already been applied.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11 10:35:15 -04:00
Auke Kok
a487a8f7b6 e1000: prevent statistics from garbling during bus resets
If a PCI bus error/fault triggers a PCI bus reset, attempts to get
the ethernet packet count statistics from the hardware will fail,
returning garbage data upstream.  This patch skips statistics data
collection if the PCI device is not on the bus.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-09 11:29:03 -07:00
Jeff Garzik
cac925a4aa Merge branch 'upstream' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into tmp 2006-06-08 15:56:17 -04:00
Jeff Garzik
bcd618e4ea Merge branch 'upstream-fixes' into upstream
Conflicts:

	drivers/net/e1000/e1000_ethtool.c
2006-06-08 15:55:45 -04:00
Auke Kok
9026729bfe e1000: add PCI Error Recovery
Various PCI bus errors can be signaled by newer PCI controllers.
This patch adds the PCI error recovery callbacks to the intel gigabit
ethernet e1000 device driver. The patch has been tested, and appears
to work well.

Signed-off-by: Linas Vepstas <linas@linas.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08 09:30:24 -07:00
Auke Kok
24f476eeec e1000: remove risky prefetch on next_skb->data
It was brought to our attention that the prefetches break e1000 traffic
on xscale/arm architectures.  Remove them for now.  We'll let them
stay in mm for a while, or find a better solution to enable.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08 09:28:47 -07:00
Auke Kok
b9b6e78b11 e1000: fix ethtool test irq alloc as "probe"
New code added in 2.6.17 caused setup_irq to print a warning when
running ethtool -t eth0 offline.

This test marks the request_irq call made by this test as a "probe"
to see if the interrupt is shared or not.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08 09:28:38 -07:00
Auke Kok
80871e63e4 e1000: add shutdown handler back to fix WOL
Someone was waaay too aggressive and removed e1000's reboot notifier
instead of porting it to the new way of the shutdown handler.  This change
broke wake on lan.  Add the shutdown handler back in using the same method
as e100 uses.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>

(cherry picked from c653e6351e commit)
2006-05-26 21:31:56 -04:00
Alexey Dobriyan
6082823632 [PATCH] e1000: endian fixes
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Ronciak, John" <john.ronciak@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26 21:29:09 -04:00
Auke Kok
440c052d6f e1000: bump version to 7.0.38-k4
Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-05-23 13:36:19 -07:00
Auke Kok
fdf35d3c49 e1000: remove changelog in driver
This honours the request to remove the changelog in the driver code.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23 13:36:14 -07:00
Auke Kok
a1943b5a79 e1000: Fix date string in Makefile
I forgot to update the date string in the Makefile last time.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23 13:36:10 -07:00
Auke Kok
76c224bc9f e1000: remove leading and trailing whitespace.
Some leading and trailing whitespace made it into the driver code here.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23 13:36:06 -07:00
Auke Kok
a42a507cd3 e1000: remove backslash r debug printfs
This removes unwanted characters in the debug output that should have
never been there.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23 13:36:01 -07:00
Auke Kok
c653e6351e e1000: add shutdown handler back to fix WOL
Someone was waaay too aggressive and removed e1000's reboot notifier
instead of porting it to the new way of the shutdown handler.  This change
broke wake on lan.  Add the shutdown handler back in using the same method
as e100 uses.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23 13:35:57 -07:00
Auke Kok
bcb49197ed e1000: Update truesize with the length of the packet for packet split
Update skb with the real packet size.


Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
2006-04-25 22:50:04 -07:00
Auke Kok
1cb5821f44 e1000: fix mismerge skb_put.
Seems there was a bit of a fix needed to due a bad merge in the legacy
receive path.  Fixes a panic due to skb_over_panic.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-04-18 12:31:04 -07:00