Commit graph

19 commits

Author SHA1 Message Date
Tim Abbott
1dc818c1c5 x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".

Linus suggested that we merge the ".text.head" section with ".text"
(presumably while preserving the fact that the head code starts at 0).
When I tried this it caused the kernel to not boot.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-18 10:21:49 -07:00
H. Peter Anvin
37ba7ab5e3 x86, boot: make kernel_alignment adjustable; new bzImage fields
Make the kernel_alignment field adjustable; this allows us to set it
to a large value (intended to be 16 MB to avoid ZONE_DMA contention,
memory holes and other weirdness) while a smart bootloader can still
force a loading at a lesser alignment if absolutely necessary.

Also export pref_address (preferred loading address, corresponding to
the link-time address) and init_size, the total amount of linear
memory the kernel will require during initialization.

[ Impact: allows better kernel placement, gives bootloader more info ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 17:44:39 -07:00
H. Peter Anvin
99aa45595f x86, boot: remove dead code from boot/compressed/head_*.S
Remove a couple of lines of dead code from
arch/x86/boot/compressed/head_*.S; all of these update registers that
are dead in the current code.

[ Impact: cleanup ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 16:17:05 -07:00
H. Peter Anvin
02a884c0fe x86, boot: determine compressed code offset at compile time
Determine the compressed code offset (from the kernel runtime address)
at compile time.  This allows some minor optimizations in
arch/x86/boot/compressed/head_*.S, but more importantly it makes this
value available to the build process, which will enable a future patch
to export the necessary linear memory footprint into the bzImage
header.

[ Impact: cleanup, future patch enabling ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:46:34 -07:00
H. Peter Anvin
36d3793c94 x86, boot: use appropriate rep string for move and clear
In the pre-decompression code, use the appropriate largest possible
rep movs and rep stos to move code and clear bss, respectively.  For
reverse copy, do note that the initial values are supposed to be the
address of the first (highest) copy datum, not one byte beyond the end
of the buffer.

rep strings are not necessarily the fastest way to perform these
operations on all current processors, but are likely to be in the
future, and perhaps more importantly, we want to encourage the
architecturally right thing to do here.

This also fixes a couple of trivial inefficiencies on 64 bits.

[ Impact: trivial performance enhancement, increase code similarity ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:34:52 -07:00
H. Peter Anvin
9754191278 x86, boot: zero EFLAGS on 32 bits
The 64-bit code already clears EFLAGS as soon as it has a stack.  This
seems like a reasonable precaution, so do it on 32 bits as well.

[ Impact: extra paranoia ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:19:01 -07:00
H. Peter Anvin
0a13773670 x86, boot: set up the decompression stack as early as possible
Set up the decompression stack as soon as we know where it needs to
go.  That way we have a full-service stack as soon as possible, rather
than relying on the BP_scratch field.

Note that the stack does need to be empty during bss zeroing (or
else the stack needs to be moved out of the bss segment, which is also
an option.)

[ Impact: cleanup, minor paranoia ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:18:47 -07:00
H. Peter Anvin
5b11f1cee5 x86, boot: straighten out ranges to copy/zero in compressed/head*.S
Both on 32 and 64 bits, we copy all the way up to the end of bss,
except that on 64 bits there is a hack to avoid copying on top of the
page tables.  There is no point in copying bss at all, especially
since we are just about to zero it all anyway.

To clean up and unify the handling, we now do:

  - copy from startup_32 to _bss.
  - zero from _bss to _ebss.
  - the _ebss symbol is aligned to an 8-byte boundary.
  - the page tables are moved to a separate section.

Use _bss as the copy endpoint since _edata may be misaligned.

[ Impact: cleanup, trivial performance improvement ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:18:10 -07:00
H. Peter Anvin
5f64ec64e7 x86, boot: stylistic cleanups for boot/compressed/head_32.S
Reformat arch/x86/boot/compressed/head_32.S to be closer to currently
preferred kernel assembly style, that is:

- opcode and operand separated by tab
- operands separated by ", "
- C-style comments

This also makes it more similar to head_64.S.

[ Impact: cleanup, no object code change ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:23 -07:00
H. Peter Anvin
bd2a36984c x86, boot: use BP_scratch in arch/x86/boot/compressed/head_*.S
Use the BP_scratch symbol from asm-offsets.h instead of hard-coding
the location.

[ Impact: cleanup ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:22 -07:00
Linus Torvalds
51b26ada79 x86: unify arch/x86/boot/compressed/vmlinux_*.lds
Look at the:

	diff -u arch/x86/boot/compressed/vmlinux_*.lds

output and realize that they're basially exactly the same except for
trivial naming differences, and the fact that the 64-bit version has a
"pgtable" thing.

So unify them.

There's some trivial cleanup there (make the output format a Kconfig thing
rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS
end to "_ebss", where 32-bit used to use the traditional "_end"), but
other than that it's really very mindless and straigt conversion.

For example, I think we should aim to remove "startup_32" vs "startup_64",
and just call it "startup", and get rid of one more difference. I didn't
do that.

Also, notice the comment in the unified vmlinux.lds.S talks about
"head_64" and "startup_32" which is an odd and incorrect mix, but that was
actually what the old 64-bit only lds file had, so the confusion isn't
new, and now that mixing is arguably more accurate thanks to the
vmlinux.lds.S file being shared between the two cases ;)

[ Impact: cleanup, unification ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-27 06:35:24 +02:00
Ingo Molnar
609162850d Merge branches 'x86/asm', 'x86/cleanups' and 'x86/headers' into x86/core 2009-02-20 17:40:50 +01:00
Cyrill Gorcunov
cb425afd21 x86: compressed head_32 - use ENTRY,ENDPROC macros
Impact: clenaup

Linker script will put startup_32 at predefined
address so using startup_32 will not bloat the
code size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:13:01 +01:00
Jeremy Fitzhardinge
0341c14da4 x86: use _types.h headers in asm where available
In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Philipp Kohlbecher
59f09ba2b6 x86: fix comment in protected mode header
Comments in arch/x86/boot/compressed/head_32.S erroneously refer to the
real mode pointer as the second and the heap area as the third argument
to decompress_kernel(). In fact, these have been the first and second
argument, respectively, since v2.6.20.

This patch corrects the comments. It introduces no code changes.

Signed-off-by: Philipp Kohlbecher <xt28@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 21:35:30 +02:00
Alexander van Heukelum
7c53976404 x86: cleanup boot-heap usage
The kernel decompressor wrapper uses memory located beyond the
end of the image. This might lead to hard to debug problems,
but even if it can be proven to be safe, it is at the very
least unclean. I don't see any advantages either, unless you
count it not being zeroed out as an advantage. This patch
moves the boot-heap area to the bss segment.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Eric W. Biederman
bd53147db8 x86: Fix boot protocol KEEP_SEGMENTS check.
The kernel only ever supports 1 version of the boot protocol
so there is no need to check the boot protocol revision to
see if a feature is supported.

Both x86 and x86_64 support the same boot protocol so we need
to implement the KEEP_SEGMENTS on x86_64 as well.  It isn't
just paravirt bootloaders that could use this functionality.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27 20:57:43 +02:00
Rusty Russell
a24e785111 i386: paravirt boot sequence
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

 1. Check the bootparams loadflags to see if we should reload the
    segment registers and clear interrupts.  This is appropriate
    for normal native boot and some paravirtualized environments, but
    inapproprate for others.

 2. Check the hardware architecture, and dispatch to the appropriate
    kernel entrypoint.  If the bootloader doesn't set this, then we
    simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Thomas Gleixner
0530bf37ce i386: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:43 +02:00
Renamed from arch/i386/boot/compressed/head_32.S (Browse further)